Перевод: с русского на немецкий

с немецкого на русский

switching+service

  • 1 продолжительный режим коммутационного аппарата

    1. ununterbrochener Betrieb

     

    непрерывный режим
    длительный режим

    -
    [IEV number 442-05-43]

    EN

    uninterrupted duty (for a switching device)
    duty in which the main contacts of a switching device remain closed whilst carrying a steady current without interruption for long periods (which could be weeks, months, or even years)
    [IEV number 442-05-43]

    FR

    service ininterrompu (pour un dispositif de coupure)
    service dans lequel les contacts principaux d'un dispositif de coupure restent fermés tout en transportant un courant permanent sans interruption pendant de longues périodes (qui peuvent être des semaines, des mois, et même des années)
    [IEV number 442-05-43]

    Тематики

    Синонимы

    EN

    DE

    FR

    Русско-немецкий словарь нормативно-технической терминологии > продолжительный режим коммутационного аппарата

  • 2 НКУ распределения и управления

    1. Schaltanlagen und/oder Schaltgeräte

     

    низковольтное устройство распределения и управления (НКУ)
    Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
    [ ГОСТ Р МЭК 61439-1-2012]

    низковольтное устройство распределения и управления

    Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
    Примечания
    1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
    2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
    3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    power switchgear and controlgear assembly (PSC-assembly)
    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    [IEC 61439-2, ed. 1.0 (2009-01)]

    low-voltage switchgear and controlgear assembly
    combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
    [IEC 61892-3, ed. 2.0 (2007-11)]

    switchgear and controlgear
    a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEV number 441-11-01]

    switchgear and controlgear

    electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
    NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
    [IEV number 826-16-03 ]

    switchboard
    A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
    [ McGraw-Hill Dictionary of Architecture & Construction]

    switchboard
    One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
    [ The American Heritage Dictionary of the English Language]

    FR

    ensemble d'appareillage de puissance (ensemble PSC)
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    [IEC 61439-2, ed. 1.0 (2009-01)]

    appareillage, m
    matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
    NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
    [IEV number 826-16-03 ]

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEV number 441-11-01]


    A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
    Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
    The types of switchboards, classified by basic features of construction, are as follows:
    1. Live-front vertical panels
    2. Dead-front boards
    3. Safety enclosed boards( metal-clad)


    [American electricians’ handbook]

    Параллельные тексты EN-RU

    The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.

    Its definition, design and installation are based on precise rules; there is no place for improvisation.

    The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.

    It specifies in particular:

    > the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;

    > the design and verification rules, constituting a benchmark for product certification.

    All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.


    Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.

    A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.

    Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.

    What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

    [Schneider Electric]

    НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.

    Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.

    Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).

    В частности, он определяет:

    > распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;

    > конструкцию, технические характеристики, виды и методы испытаний НКУ.

    В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.

    Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.

    Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.

    Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.

    Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.

    [Перевод Интент]

     

    LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.

    The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.

    In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.

    Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.

    The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.

    [ABB]

    Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.

    Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам

    Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.

    Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются

    Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Действия

    Синонимы

    Сопутствующие термины

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

    Русско-немецкий словарь нормативно-технической терминологии > НКУ распределения и управления

  • 3 замкнутое положение контактного коммутационного аппарата

    1. geschlossene Stellung (eines mechanischen Schaltgerätes)

     

    замкнутое положение контактного коммутационного аппарата
    Положение, при котором обеспечена предусмотренная непрерывность главной цепи аппарата.
    МЭК 60050(441-16-22).
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]


    замкнутое положение контактов аппарата
    Положение подвижного и неподвижного контактов контактного аппарата, при котором они соприкасаются.
    [ ГОСТ 17703-72]

    EN

    closed position (of a mechanical switching device)
    the position in which the predetermined continuity of the main circuit of the device is secured
    NOTE - Redetermined continuity means that the contacts are fully engaged to carry the rated normal and the rated short-circuit currents, as applicable.
    [IEC 62271-102, ed. 1.0 (2001-12)]

    FR

    position de fermeture (d'un appareil mécanique de connexion)
    position dans laquelle la continuité prédéterminée du circuit principal de l’appareil est assurée
    NOTE - La continuité prédéterminée signifie que les contacts sont totalement fermés pour supporter le courant assigné en service continu et le courant de court-circuit, lorsque applicable.
    [IEC 62271-102, ed. 1.0 (2001-12)]

    Недопустимые, нерекомендуемые

    Тематики

    • аппарат, изделие, устройство...

    EN

    DE

    FR

    Русско-немецкий словарь нормативно-технической терминологии > замкнутое положение контактного коммутационного аппарата

  • 4 контактор (контактный)

    1. Schütz
    2. Kontaktgeber

     

    контактор (механический) 1
    Контактный коммутационный аппарат с единственным положением покоя, с управлением не вручную, способным включать, проводить и отключать токи в нормальных условиях цепи, в том числе при рабочих перегрузках.
    МЭК 60050(441-14-33).
    Примечание. Контакторы можно характеризовать способом, которым обеспечивается создание усилия для замыкания главных контактов
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]

    контактор
    Двухпозиционный аппарат с самовозвратом, предназначенный для частых коммутаций токов, не превышающих токи перегрузки, и приводимый в действие двигательным приводом.
    Примечание. Для аналогичных аппаратов без самовозврата следует применять термин «Контактор без самовозврата».
    [ ГОСТ 17703-72]

    контактор
    Выключатель для дистанционного включения, отключения и переключения силовых электрических цепей
    [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]

    EN

    (mechanical) contactor
    a mechanical switching device having only one position of rest, operated otherwise than by hand, capable of making, carrying and breaking currents under normal circuit conditions including operating overload conditions
    NOTE – Contactors may be designated according to the method by which the force for closing the main contacts is provided.
    [IEV number 441-14-33]

    FR

    contacteur (mécanique)
    appareil mécanique de connexion ayant une seule position de repos, commandé autrement qu'à la main, capable d'établir, de supporter et d'interrompre des courants dans les conditions normales du circuit, y compris les conditions de surcharge en service
    NOTE – Les contacteurs peuvent être désignés suivant la façon dont est fourni l'effort nécessaire à la fermeture des contacts principaux.
    [IEV number 441-14-33]

      Должно быть " контактный"
    См., например, выключатель (контактный) - (mechanical) switch
    Коммутационные аппараты следует классифицировать на контактные и полупроводниковые (solid-state)
    [Интент]

    1. Контактор на относительно небольшой номинальный ток, это такой же коммутационный аппарат, как и пускатель, но без теплового реле (можно сказать, что пускатель это контактор плюс тепловое реле).

    2. Контактор на большой номинальный ток выглядит совсем иначе

    0236
    Отечественный контактор КТ-6063

    Число полюсов: 3
    Номинальное напряжение главной цепи: 380 В
    Номинальный ток главной цепи: 1000 А
    Номинальное напряжение катушки: 380 В переменного тока

    Контакторы электромагнитные серии КТ 6000 с естественным воздушным охлаждением предназначены для включения и отключения приемников электрической энергии на номинальное напряжение до 380 В переменного тока частоты 50 и 60Гц.
    Используются в составе оборудования для включения мощных электрических машин и в аппаратуре автоматического включения резерва (АВР).

    3. Контакторами называют также коммутационные аппараты, коммутационная способность которых больше коммутационной способности реле (см. рис. ниже)
    [Интент]

    0230_1
    Рис. Tyco Electronics

    Параллельные тексты EN-RU

    Although contactors are not strictly relays they have the same design principles. Like relays, they are remote controlled switches.
    The difference is the considerably higher input power consumption, higher switching capacity, and larger size.

    [Tyco Electronics]

    Хотя, строго говоря, контакторы не являются реле, их конструкция имеет много общего с конструкцией реле. Также как и реле, они представляют собой коммутационный аппарат с дистационным управлением.
    Отличие состоит в том, что их входная цепь потребляет значительно больший ток, они имеют существенно большую коммутационную способность и их размеры также больше размеров реле.

    [Перевод Интент]

    Недопустимые, нерекомендуемые

    Тематики

    Действия

    Неправильно:- замыкать контактор; - размыкать контактор

    Синонимы

    EN

    DE

    FR

    Русско-немецкий словарь нормативно-технической терминологии > контактор (контактный)

  • 5 автоматический тестовый контроль

    1. automatische Prüfung, f

     

    автоматический тестовый контроль
    Автоматический контроль, при котором осуществляется тестирование после вывода из действия части или всей защиты, обычно путем блокировки, воздействуя таким образом на функционирование защиты
    [Разработка типовых структурных схем микропроцессорных устройств РЗА на объектах ОАО "ФКС ЕЭС". Пояснительная записка. Новосибирск 2006 г.]

    EN

    automatic test function
    self-testing function (US)

    an automatic supervision function that performs testing after switching out from normal service part or all of the protection, usually via trip blocking, thus affecting the protection function of the protection
    [IEV ref 448-12-13]

    FR

    fonction d'essai automatique
    fonction de surveillance automatique qui assure un essai après avoir mis hors service tout ou partie de la protection, habituellement en verrouillant le déclenchement, ce qui affecte la fonction propre de la protection
    [IEV ref 448-12-13]

    Тематики

    EN

    DE

    • automatische Prüfung, f

    FR

    Русско-немецкий словарь нормативно-технической терминологии > автоматический тестовый контроль

  • 6 оперативный проход

    1. Bedienungsgang, m

     

    оперативный проход
    Пространство, которое использует оператор для выполнения необходимых операций и наблюдения за работой НКУ.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]


    проход для оперативного обслуживания
    Проход, используемый в процессе работы для целей, таких как переключение, управление, настройка или осмотр электрических устройств
    [ ГОСТ Р МЭК 60050-826-2009]

    EN

    operating gangway
    gangway used during operation, for purposes such as switching, controlling, setting or observation of electric devices
    [IEV number 826-10-09]

    FR

    passage de service, m
    passage utilisé pendant le fonctionnement pour des besoins tels que connexion, commande, réglage ou observation des matériels électriques
    [IEV number 826-10-09]

    Тематики

    Синонимы

    EN

    DE

    • Bedienungsgang, m

    FR

    • passage de service, m

    Русско-немецкий словарь нормативно-технической терминологии > оперативный проход

  • 7 устройство дифференциального тока

    1. Fehlerstrom-Schutzeinrichtung

     

    устройство дифференциального тока
    УДТ

    Механическое коммутационное устройство, предназначенное включать, проводить и отключать токи в нормальных рабочих условиях и вызывать размыкание контактов, когда дифференциальный ток достигает заданного значения в определенных условиях.
    Примечание - Устройство дифференциального тока может быть комбинацией различных отдельных элементов, предназначенных обнаруживать и оценивать дифференциальный ток, а также включать и отключать электрический ток.
    Примечание - В национальной нормативной документации вместо термина «устройство дифференциального тока» применяют термин « устройство защитного отключения».
    [ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]

    устройство дифференциального тока
    УДТ

    Механическое коммутационное устройство или комплекс устройств, которые вызывают размыкание контактов, когда дифференциальный или несбалансированный ток достигнет заданного значения в заданных условиях.
    [ ГОСТ Р 51992-2011( МЭК 61643-1: 2005)]

    EN

    residual current device
    RCD, (abbreviation)

    a mechanical switching device designed to make, carry and break currents under normal service conditions and to cause the opening of the contacts when the residual current attains a given value under specified conditions
    NOTE – A residual current device can be a combination of various separate elements designed to detect and evaluate the residual current and to make and break current.
    [IEV number 442-05-02]

    FR

    dispositif (de coupure) différentiel
    dispositif (à courant) différentiel résiduel
    DDR (abréviation)

    dispositif mécanique de coupure destiné à établir, supporter et couper des courants dans les conditions de service normales et à provoquer l'ouverture des contacts quand le courant différentiel atteint, dans des conditions spécifiées, une valeur donnée
    NOTE – Un dispositif de coupure différentiel peut être une combinaison de divers éléments séparés conçus pour détecter et mesurer le courant différentiel et pour établir ou interrompre le courant.
    [IEV number 442-05-02]

    Параллельные тексты EN-RU

    Operating principle of residual current devices

    The operating principle of residual current devices consists in the detection of an earth fault current by means of a toroidal transformer which encloses all the live conductors, included the neutral, if distributed.
    In absence of an earth fault the vectorial sum of the currents IΔ is equal to zero; in case of an earth fault, if the value of IΔ exceeds the value of the trip threshold, called IΔ n, the circuit at the secondary of the toroid sends a command signal to a dedicated opening device causing the circuit-breaker tripping.

    [ABB]

    Принцип действия устройств дифференциального тока

    Принцип действия устройств дифференциального тока заключается в обнаружении тока замыкания на землю с помощью тороидального трансформатора, который охватывает все токоведущие, в том числе и нейтральный проводник, если он используется для распределения электроэнергии.
    При отсутствии замыкания на землю векторная сумма токов IΔ равна нулю. Если при возникновении замыкания на землю значение IΔ превысит уставку срабатывания, обозначаемую как IΔn, то во вторичной обмотке тороидального трансформатора будет наведена ЭДС, достаточная для включения специального устройства, вызывающего срабатывание автоматического выключателя

    [Перевод Интент]

    Тематики

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Русско-немецкий словарь нормативно-технической терминологии > устройство дифференциального тока

  • 8 выключатель (контактный)

    1. Lastschalter

     

    выключатель (контактный)
    Контактный коммутационный аппарат, способный включать, проводить и отключать токи в нормальных условиях, в том числе при оговоренных рабочих перегрузках, а также в течение установленного времени проводить ток в оговоренных аномальных условиях, например при коротком замыкании.
    МЭК 60050(441-14-10)
    Примечание. Выключатель может быть способен включать, но не отключать ток короткого замыкания.
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]

    EN

    (mechanical) switch
    a mechanical switching device capable of making, carrying and breaking currents under normal circuit conditions which may include specified operating overload conditions and also carrying for a specified time currents under specified abnormal circuit conditions such as those of short circuit
    NOTE – A switch may be capable of making but not breaking short-circuit currents.
    [IEV number 441-14-10]

    FR

    interrupteur (mécanique)
    appareil mécanique de connexion capable d'établir, de supporter et d'interrompre des courants dans les conditions normales du circuit y compris éventuellement les conditions spécifiées de surcharge en service, ainsi que de supporter pendant une durée spécifiée des courants dans des conditions anormales spécifiées du circuit telles que celles du court-circuit
    NOTE – Un interrupteur peut être capable d'établir des courants de court-circuit mais n'est pas capable de les couper
    [IEV number 441-14-10]

    Недопустимые, нерекомендуемые

    Тематики

    • выключатель, переключатель

    EN

    DE

    FR

    Русско-немецкий словарь нормативно-технической терминологии > выключатель (контактный)

  • 9 коммутационная износостойкость контактного аппарата

    1. elektrische Lebensdauer

     

    коммутационная износостойкость контактного аппарата
    Способность контактного аппарата выполнять в определенных условиях определенное число операций при коммутации его контактами цепей, имеющих заданные параметры, оставаясь после этого в предусмотренном состоянии.
    [ ГОСТ 17703-72]

    EN

    electrical endurance
    number of cycles until relay failure, with specified electrical loading of the output circuit(s) and under specified operating conditions
    [IEV number 444-07-11]

    FR

    endurance électrique, f
    nombre de manœuvres avant défaillance du relais, avec une charge électrique spécifiée du ou des circuits de sortie et dans des conditions de fonctionnement spécifiées
    [IEV number 444-07-11]

    По стойкости к коммутационному износу аппарат характеризуется числом циклов оперирования при прохождении тока согласно условиям эксплуатации, указанным в стандарте на соответствующий аппарат, которые он должен осуществить без ремонта или замены частей.
    [<> ГОСТ Р 50030. 1-2000]

    Недопустимые, нерекомендуемые

    Тематики

    EN

    DE

    FR

    • endurance électrique, f

    Русско-немецкий словарь нормативно-технической терминологии > коммутационная износостойкость контактного аппарата

См. также в других словарях:

  • switching service — Also called transfer service,–the service rendered by a railroad company in switching cars for special benefit of shipper or consignee, either preceding or following a transportation service. The term applies only to a shipment on which legal… …   Ballentine's law dictionary

  • Service-oriented architecture — (SOA) is a method for systems development and integration where functionality is grouped around business processes and packaged as interoperable services . SOA also describes IT infrastructure which allows different applications to exchange data… …   Wikipedia

  • switching operations — See switch; switching service …   Ballentine's law dictionary

  • switching cost — UK US noun [C] COMMERCE ► the cost of moving your bank account to another bank, changing to a different phone service, etc: »People put up with bad service because the switching costs are high …   Financial and business terms

  • Service switching point — In telephony, a Service Switching Point (SSP) is the telephone exchange that initially responds, when a telephone caller dials a number, by sending a query to a central database called a Service Control Point (SCP) so that the call can be handled …   Wikipedia

  • Switching — Ein Switch (engl. Schalter; auch Weiche) ist eine Netzwerk Komponente zur Verbindung mehrerer Computer bzw. Netz Segmente in einem lokalen Netzwerk (LAN). Da Switches den Netzwerkverkehr analysieren und logische Entscheidungen treffen, werden sie …   Deutsch Wikipedia

  • Service Evaluation System — The Service Evaluation System (SES) was an Operations Support System developed by Bell Laboratories and used by telephone companies beginning in the late 1960s. Many local, long distance, and operator circuit switching systems provided special… …   Wikipedia

  • Switching Control Center System — The Switching Control Center System was an Operations Support System developed by Bell Laboratories and deployed during the early 1970s. This computer system was first based on the PDP 11 product line from Digital Equipment Corporation and used… …   Wikipedia

  • Switching center — A switching center is a node in a telecommunications Circuit switching network which is connected to either another switching center and/or to end user devices. Switching centers are aware of other centers and possible routes between them such… …   Wikipedia

  • Service Capability Interaction Manager — A Service Capability Interaction Manager (or SCIM) orchestrates service delivery among application server platforms within the IP Multimedia Subsystem architecture.The Service Capability Interaction Manager (SCIM) was introduced in 3GPP TS 23.002 …   Wikipedia

  • Service layer — In intelligent networks (IN) and cellular networks, service layer is a conceptual layer within a network service provider architecture. It aims at providing middleware that serves third party value added services and applications at a higher… …   Wikipedia

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»