Перевод: с немецкого на русский

с русского на немецкий

higher+and+higher

  • 1 Schaltanlagen und/oder Schaltgeräte

    1. НКУ распределения и управления
    2. аппаратура распределения и управления

     

    аппаратура распределения и управления
    Общий термин для коммутационных аппаратов и их комбинации с относящимися к ним устройствами управления, измерения, защиты и регулирования, а также для узлов, в которых такие аппараты и устройства соединяются с соответствующими фидерами, комплектующим оборудованием, оболочками и опорными конструкциями.
    МЭК 60050 (441-11-01) [1].
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]

    EN

    switchgear and controlgear
    general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEC 62271-1, ed. 1.0 (2007-10)]

    FR

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu’aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEC 62271-1, ed. 1.0 (2007-10)]

    Тематики

    • аппарат, изделие, устройство...

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

     

    низковольтное устройство распределения и управления (НКУ)
    Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
    [ ГОСТ Р МЭК 61439-1-2012]

    низковольтное устройство распределения и управления

    Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
    Примечания
    1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
    2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
    3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    power switchgear and controlgear assembly (PSC-assembly)
    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    [IEC 61439-2, ed. 1.0 (2009-01)]

    low-voltage switchgear and controlgear assembly
    combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
    [IEC 61892-3, ed. 2.0 (2007-11)]

    switchgear and controlgear
    a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEV number 441-11-01]

    switchgear and controlgear

    electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
    NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
    [IEV number 826-16-03 ]

    switchboard
    A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
    [ McGraw-Hill Dictionary of Architecture & Construction]

    switchboard
    One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
    [ The American Heritage Dictionary of the English Language]

    FR

    ensemble d'appareillage de puissance (ensemble PSC)
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    [IEC 61439-2, ed. 1.0 (2009-01)]

    appareillage, m
    matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
    NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
    [IEV number 826-16-03 ]

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEV number 441-11-01]


    A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
    Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
    The types of switchboards, classified by basic features of construction, are as follows:
    1. Live-front vertical panels
    2. Dead-front boards
    3. Safety enclosed boards( metal-clad)


    [American electricians’ handbook]

    Параллельные тексты EN-RU

    The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.

    Its definition, design and installation are based on precise rules; there is no place for improvisation.

    The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.

    It specifies in particular:

    > the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;

    > the design and verification rules, constituting a benchmark for product certification.

    All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.


    Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.

    A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.

    Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.

    What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

    [Schneider Electric]

    НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.

    Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.

    Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).

    В частности, он определяет:

    > распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;

    > конструкцию, технические характеристики, виды и методы испытаний НКУ.

    В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.

    Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.

    Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.

    Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.

    Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.

    [Перевод Интент]

     

    LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.

    The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.

    In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.

    Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.

    The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.

    [ABB]

    Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.

    Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам

    Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.

    Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются

    Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Действия

    Синонимы

    Сопутствующие термины

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

    Немецко-русский словарь нормативно-технической терминологии > Schaltanlagen und/oder Schaltgeräte

  • 2 Optimierung

    1. оптимизация

     

    оптимизация
    Процесс отыскания варианта, соответствующего критерию оптимальности
    [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]

    оптимизация
    1. Процесс нахождения экстремума функции, т.е. выбор наилучшего варианта из множества возможных, процесс выработки оптимальных решений; 2. Процесс приведения системы в наилучшее (оптимальное) состояние. Иначе говоря, первое определение трактует термин «О.» как факт выработки и принятия оптимального решения (в широком смысле этих слов); мы выясняем, какое состояние изучаемой системы будет наилучшим с точки зрения предъявляемых к ней требований (критерия оптимальности) и рассматриваем такое состояние как цель. В этом смысле применяется также термин «субоптимизация» в случаях, когда отыскивается оптимум по какому-либо одному критерию из нескольких в векторной задаче оптимизации (см. Оптимальность по Парето, Векторная оптимизация). Второе определение имеет в виду процесс выполнения этого решения: т.е. перевод системы от существующего к искомому оптимальному состоянию. В зависимости от вида используемых критериев оптимальности (целевых функций или функционалов) и ограничений модели (множества допустимых решений) различают скалярную О., векторную О., мно¬гокритериальную О., стохастическую О (см. Стохастическое программирование), гладкую и негладкую (см. Гладкая функция), дискретную и непрерывную (см. Дискретность, Непрерывность), выпуклую и вогнутую (см. Выпуклость, вогнутость) и др. Численные методы О., т.е. методы построения алгоритмов нахождения оп¬тимальных значений целевых функций и соответствующих точек области допустимых значений — развитой отдел современной вычислительной математики. См. Оптимальная задача.
    [ http://slovar-lopatnikov.ru/]

    Параллельные тексты EN-RU из ABB Review. Перевод компании Интент

    The quest for the optimum

    Вопрос оптимизации

    Throughout the history of industry, there has been one factor that has spurred on progress more than any other. That factor is productivity. From the invention of the first pump to advanced computer-based optimization methods, the key to the success of new ideas was that they permitted more to be achieved with less. This meant that consumers could, over time and measured in real terms, afford to buy more with less money. Luxuries restricted to a tiny minority not much more than a generation ago are now available to almost everybody in developed countries, with many developing countries rapidly catching up.

    На протяжении всей истории промышленности существует один фактор, подстегивающий ее развитие сильнее всего. Он называется «производительность». Начиная с изобретения первого насоса и заканчивая передовыми методами компьютерной оптимизации, успех новых идей зависел от того, позволяют ли они добиться большего результата меньшими усилиями. На языке потребителей это значит, что они всегда хотят купить больше, а заплатить меньше. Меньше чем поколение назад, многие предметы считались роскошью и были доступны лишь немногим. Сейчас в развитых странах, число которых быстро увеличивается, подобное может позволить себе почти каждый.

    With industry and consumers expecting the trend towards higher productivity to continue, engineering companies are faced with the challenge of identifying and realizing further optimization potential. The solution often lies in taking a step back and looking at the bigger picture. Rather than optimizing every step individually, many modern optimization techniques look at a process as a whole, and sometimes even beyond it. They can, for example, take into account factors such as the volatility of fuel quality and price, the performance of maintenance and service practices or even improved data tracking and handling. All this would not be possible without the advanced processing capability of modern computer and control systems, able to handle numerous variables over large domains, and so solve optimization problems that would otherwise remain intractable.

    На фоне общей заинтересованности в дальнейшем росте производительности, машиностроительные и проектировочные компании сталкиваются с необходимостью определения и реализации возможностей по оптимизации своей деятельности. Для того чтобы найти решение, часто нужно сделать шаг назад, поскольку большое видится на расстоянии. И поэтому вместо того, чтобы оптимизировать каждый этап производства по отдельности, многие современные решения охватывают процесс целиком, а иногда и выходят за его пределы. Например, они могут учитывать такие факторы, как изменение качества и цены топлива, результативность ремонта и обслуживания, и даже возможности по сбору и обработке данных. Все это невозможно без использования мощных современных компьютеров и систем управления, способных оперировать множеством переменных, связанных с крупномасштабными объектами, и решать проблемы оптимизации, которые другим способом решить нереально.

    Whether through a stunning example of how to improve the rolling of metal, or in a more general overview of progress in optimization algorithms, this edition of ABB Review brings you closer to the challenges and successes of real world computer-based optimization tasks. But it is not in optimization and solving alone that information technology is making a difference: Who would have thought 10 years ago, that a technician would today be able to diagnose equipment and advise on maintenance without even visiting the factory? ABB’s Remote Service makes this possible. In another article, ABB Review shows how the company is reducing paperwork while at the same time leveraging quality control through the computer-based tracking of production. And if you believed that so-called “Internet communities” were just about fun, you will be surprised to read how a spin-off of this idea is already leveraging production efficiency in real terms. Devices are able to form “social networks” and so facilitate maintenance.

    Рассказывая об ошеломляющем примере того, как был усовершенствован процесс прокатки металла, или давая общий обзор развития алгоритмов оптимизации, этот выпуск АББ Ревю знакомит вас с практическими задачами и достигнутыми успехами оптимизации на основе компьютерных технологий. Но информационные технологии способны не только оптимизировать процесс производства. Кто бы мог представить 10 лет назад, что сервисный специалист может диагностировать производственное оборудование и давать рекомендации по его обслуживанию, не выходя из офиса? Это стало возможно с пакетом Remote Service от АББ. В другой статье этого номера АББ Ревю рассказывается о том, как компания смогла уменьшить бумажный документооборот и одновременно повысить качество управления с помощью компьютерного контроля производства. Если вы считаете, что так называемые «интернет-сообщества» служат только для развлечения,
    то очень удивитесь, узнав, что на основе этой идеи можно реально повысить производительность. Формирование «социальной сети» из автоматов значительно облегчает их обслуживание.

    This edition of ABB Review also features several stories of service and consulting successes, demonstrating how ABB’s expertise has helped customers achieve higher levels of productivity. In a more fundamental look at the question of what reliability is really about, a thought-provoking analysis sets out to find the definition of that term that makes the greatest difference to overall production.

    В этом номере АББ Ревю есть несколько статей, рассказывающих об успешных решениях по организации дистанционного сервиса и консультирования. Из них видно, как опыт АББ помогает нашим заказчикам повысить производительность своих предприятий. Углубленные размышления о самой природе термина «надежность» приводят к парадоксальным выводам, способным в корне изменить представления об оптимизации производства.

    Robots have often been called “the extended arm of man.” They are continuously advancing productivity by meeting ever-tightening demands on precision and efficiency. This edition of ABB Review dedicates two articles to robots.

    Робот – это могучее «продолжение» человеческой руки. Применение роботов способствует постоянному повышению производительности, поскольку они отвечают самым строгим требованиям точности и эффективности. Две статьи в этом номере АББ Ревю посвящены роботам.

    Further technological breakthroughs discussed in this issue look at how ABB is keeping water clean or enabling gas to be shipped more efficiently.

    Говоря о других технологических достижениях, обсуждаемых на страницах журнала, следует упомянуть о том, как компания АББ обеспечивает чистоту воды, а также более эффективную перевозку сжиженного газа морским транспортом.

    The publication of this edition of ABB Review is timed to coincide with ABB Automation and Power World 2009, one of the company’s greatest customer events. Readers visiting this event will doubtlessly recognize many technologies and products that have been covered in this and recent editions of the journal. Among the new products ABB is launching at the event is a caliper permitting the flatness of paper to be measured optically. We are proud to carry a report on this product on the very day of its launch.

    Публикация этого номера АББ Ревю совпала по времени с крупнейшей конференцией для наших заказчиков «ABB Automation and Power World 2009». Читатели, посетившие ее, смогли воочию увидеть многие технологии и изделия, описанные в этом и предыдущих выпусках журнала. Среди новинок, представленных АББ на этой конференции, был датчик, позволяющий измерять толщину бумаги оптическим способом. Мы рады сообщить, что сегодня он готов к выпуску.

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Optimierung

  • 3 Alkan

    1. алкан

     

    алкан

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    alkane
    Paraffins. A homologous series of saturated hydrocarbons having the general formula CnH2n+2. Their systematic names end in -ane. They are chemically inert, stable, and flammable. The first four members of the series (methane, ethane, propane, butane) are gases at ordinary temperatures; the next eleven are liquids, and form the main constituents of paraffin oil; the higher members are solids. Paraffin waxs consists mainly of higher alkanes. (Source: UVAROV)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Alkan

  • 4 Kontaktgeber

    1. контактор (контактный)

     

    контактор (механический) 1
    Контактный коммутационный аппарат с единственным положением покоя, с управлением не вручную, способным включать, проводить и отключать токи в нормальных условиях цепи, в том числе при рабочих перегрузках.
    МЭК 60050(441-14-33).
    Примечание. Контакторы можно характеризовать способом, которым обеспечивается создание усилия для замыкания главных контактов
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]

    контактор
    Двухпозиционный аппарат с самовозвратом, предназначенный для частых коммутаций токов, не превышающих токи перегрузки, и приводимый в действие двигательным приводом.
    Примечание. Для аналогичных аппаратов без самовозврата следует применять термин «Контактор без самовозврата».
    [ ГОСТ 17703-72]

    контактор
    Выключатель для дистанционного включения, отключения и переключения силовых электрических цепей
    [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]

    EN

    (mechanical) contactor
    a mechanical switching device having only one position of rest, operated otherwise than by hand, capable of making, carrying and breaking currents under normal circuit conditions including operating overload conditions
    NOTE – Contactors may be designated according to the method by which the force for closing the main contacts is provided.
    [IEV number 441-14-33]

    FR

    contacteur (mécanique)
    appareil mécanique de connexion ayant une seule position de repos, commandé autrement qu'à la main, capable d'établir, de supporter et d'interrompre des courants dans les conditions normales du circuit, y compris les conditions de surcharge en service
    NOTE – Les contacteurs peuvent être désignés suivant la façon dont est fourni l'effort nécessaire à la fermeture des contacts principaux.
    [IEV number 441-14-33]

      Должно быть " контактный"
    См., например, выключатель (контактный) - (mechanical) switch
    Коммутационные аппараты следует классифицировать на контактные и полупроводниковые (solid-state)
    [Интент]

    1. Контактор на относительно небольшой номинальный ток, это такой же коммутационный аппарат, как и пускатель, но без теплового реле (можно сказать, что пускатель это контактор плюс тепловое реле).

    2. Контактор на большой номинальный ток выглядит совсем иначе

    0236
    Отечественный контактор КТ-6063

    Число полюсов: 3
    Номинальное напряжение главной цепи: 380 В
    Номинальный ток главной цепи: 1000 А
    Номинальное напряжение катушки: 380 В переменного тока

    Контакторы электромагнитные серии КТ 6000 с естественным воздушным охлаждением предназначены для включения и отключения приемников электрической энергии на номинальное напряжение до 380 В переменного тока частоты 50 и 60Гц.
    Используются в составе оборудования для включения мощных электрических машин и в аппаратуре автоматического включения резерва (АВР).

    3. Контакторами называют также коммутационные аппараты, коммутационная способность которых больше коммутационной способности реле (см. рис. ниже)
    [Интент]

    0230_1
    Рис. Tyco Electronics

    Параллельные тексты EN-RU

    Although contactors are not strictly relays they have the same design principles. Like relays, they are remote controlled switches.
    The difference is the considerably higher input power consumption, higher switching capacity, and larger size.

    [Tyco Electronics]

    Хотя, строго говоря, контакторы не являются реле, их конструкция имеет много общего с конструкцией реле. Также как и реле, они представляют собой коммутационный аппарат с дистационным управлением.
    Отличие состоит в том, что их входная цепь потребляет значительно больший ток, они имеют существенно большую коммутационную способность и их размеры также больше размеров реле.

    [Перевод Интент]

    Недопустимые, нерекомендуемые

    Тематики

    Действия

    Неправильно:- замыкать контактор; - размыкать контактор

    Синонимы

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Kontaktgeber

  • 5 Schütz

    1. контактор (контактный)

     

    контактор (механический) 1
    Контактный коммутационный аппарат с единственным положением покоя, с управлением не вручную, способным включать, проводить и отключать токи в нормальных условиях цепи, в том числе при рабочих перегрузках.
    МЭК 60050(441-14-33).
    Примечание. Контакторы можно характеризовать способом, которым обеспечивается создание усилия для замыкания главных контактов
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]

    контактор
    Двухпозиционный аппарат с самовозвратом, предназначенный для частых коммутаций токов, не превышающих токи перегрузки, и приводимый в действие двигательным приводом.
    Примечание. Для аналогичных аппаратов без самовозврата следует применять термин «Контактор без самовозврата».
    [ ГОСТ 17703-72]

    контактор
    Выключатель для дистанционного включения, отключения и переключения силовых электрических цепей
    [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]

    EN

    (mechanical) contactor
    a mechanical switching device having only one position of rest, operated otherwise than by hand, capable of making, carrying and breaking currents under normal circuit conditions including operating overload conditions
    NOTE – Contactors may be designated according to the method by which the force for closing the main contacts is provided.
    [IEV number 441-14-33]

    FR

    contacteur (mécanique)
    appareil mécanique de connexion ayant une seule position de repos, commandé autrement qu'à la main, capable d'établir, de supporter et d'interrompre des courants dans les conditions normales du circuit, y compris les conditions de surcharge en service
    NOTE – Les contacteurs peuvent être désignés suivant la façon dont est fourni l'effort nécessaire à la fermeture des contacts principaux.
    [IEV number 441-14-33]

      Должно быть " контактный"
    См., например, выключатель (контактный) - (mechanical) switch
    Коммутационные аппараты следует классифицировать на контактные и полупроводниковые (solid-state)
    [Интент]

    1. Контактор на относительно небольшой номинальный ток, это такой же коммутационный аппарат, как и пускатель, но без теплового реле (можно сказать, что пускатель это контактор плюс тепловое реле).

    2. Контактор на большой номинальный ток выглядит совсем иначе

    0236
    Отечественный контактор КТ-6063

    Число полюсов: 3
    Номинальное напряжение главной цепи: 380 В
    Номинальный ток главной цепи: 1000 А
    Номинальное напряжение катушки: 380 В переменного тока

    Контакторы электромагнитные серии КТ 6000 с естественным воздушным охлаждением предназначены для включения и отключения приемников электрической энергии на номинальное напряжение до 380 В переменного тока частоты 50 и 60Гц.
    Используются в составе оборудования для включения мощных электрических машин и в аппаратуре автоматического включения резерва (АВР).

    3. Контакторами называют также коммутационные аппараты, коммутационная способность которых больше коммутационной способности реле (см. рис. ниже)
    [Интент]

    0230_1
    Рис. Tyco Electronics

    Параллельные тексты EN-RU

    Although contactors are not strictly relays they have the same design principles. Like relays, they are remote controlled switches.
    The difference is the considerably higher input power consumption, higher switching capacity, and larger size.

    [Tyco Electronics]

    Хотя, строго говоря, контакторы не являются реле, их конструкция имеет много общего с конструкцией реле. Также как и реле, они представляют собой коммутационный аппарат с дистационным управлением.
    Отличие состоит в том, что их входная цепь потребляет значительно больший ток, они имеют существенно большую коммутационную способность и их размеры также больше размеров реле.

    [Перевод Интент]

    Недопустимые, нерекомендуемые

    Тематики

    Действия

    Неправильно:- замыкать контактор; - размыкать контактор

    Синонимы

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Schütz

  • 6 Hochschulausbildung

    1. высшее образование

     

    высшее образование

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    higher education
    Study beyond secondary school at an institution that offers programs terminating in undergraduate and graduate degrees. (Source: COE)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Hochschulausbildung

  • 7 Algenblüte

    1. рост водорослей

     

    рост водорослей

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    algal bloom
    Excessive and rapid growth of algae and other aquatic plants when they are stimulated to grow too quickly by pollution. It takes place when there are too many nutrients in the water and is aggravated when accompanied by a rise in temperature. Although the algae grow quickly they soon die because they have swallowed up all the water's nutrients. As they decompose they tend to rise to the surface and form a green slime. Algal bloom have increased because higher levels of nitrogen and phosphates from agricultural areas have leached from the fields into water courses. (Source: WRIGHT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Algenblüte

  • 8 gelöster Sauerstoff

    1. растворенный кислород

     

    растворенный кислород

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    dissolved oxygen
    The amount of oxygen dissolved in a stream, river or lake is an indication of the degree of health of the stream and its ability to support a balanced aquatic ecosystem. The oxygen comes from the atmosphere by solution and from photosynthesis of water plants. The maximum amount of oxygen that can be held in solution in a stream is termed the saturation concentration and, as it is a function of temperature, the greater the temperature, the less the saturation amount. The discharge of an organic waste to a stream imposes an oxygen demand on the stream. If there is an excessive amount of organic matter, the oxidation of waste by microorganisms will consume oxygen more rapidly than it can be replenished. When this happens, the dissolved oxygen is depleted and results in the death of the higher forms of life. (Source: PORT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > gelöster Sauerstoff

  • 9 Kraft-Wärme-Kopplung

    1. одновременная генерация тепла и электричества

     

    одновременная генерация тепла и электричества

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    cogeneration
    Usually the generation of heat in the form of steam, and the generation of power in the form of electricity. Combined heat and power plants are able to convert a much higher proportion of the energy in fuel into final output. The steam produced may be used through heat exchangers in a district heating scheme, while the electricity provides lighting and power. (Source: GILP96)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Kraft-Wärme-Kopplung

  • 10 Höhe

    1. высота (геогр.)

     

    высота (геогр.)

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    altitude
    1) In general, a term used to describe a topographic eminence. 2) A specific altitude or height above a given level. 3) In surveying, the term refers to the angle between the horizontal and a point at a higher level. (Source: WHIT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Höhe

  • 11 Tal

    1. долина

     

    долина

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    valley
    Any low-lying land bordered by higher ground; especially an elongate, relatively large, gently sloping depression of the Earth's surface, commonly situated between two mountains or between ranges of hills or mountains, and often containing a stream with an outlet. It is usually developed by stream erosion, but may be formed by faulting. (Source: BJGEO)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Tal

  • 12 Immunologie

    1. иммунология

     

    иммунология

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    immunology
    A branch of biological science concerned with the native or acquired resistance of higher animal forms and humans to infection with microorganisms. (Source: MGH)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Immunologie

  • 13 Blatt (Pflanze)

    1. лист (бот.)

     

    лист (бот.)

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    leaf
    The main organ of photosynthesis and transpiration in higher plants, usually consisting of a flat green blade attached to the stem directly or by a stalk. (Source: CED)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Blatt (Pflanze)

  • 14 organischer Stickstoff

    1. органический азот

     

    органический азот

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    organic nitrogen
    Essential nutrient of the food supply of plants and the diets of animals. Animals obtain it in nitrogen-containing compounds, particularly aminoacids. Although the atmosphere is nearly 80% gaseous nitrogen, very few organisms have the ability to use it in this form. The higher plants normally obtain it from the soil after microorganisms have converted the nitrogen into ammonia or nitrates, which they can then absorb. This conversion of nitrogen, known as nitrogen fixation, is essential for the formation of amino acids which, in turn, are the building blocks of proteins. (Source: WRIGHT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > organischer Stickstoff

  • 15 Einschwingspannung

    1. переходное восстанавливающееся напряжение

     

    переходное восстанавливающееся напряжение
    ПВН

    Восстанавливающееся напряжение в течение времени, когда оно имеет заметно выраженный переходный характер. Оно может быть колебательным или апериодическим или их комбинацией, в зависимости от характеристик цепи и выключателя, отражает также смещение напряжения нейтрали многофазной цепи.
    ПВН в трехфазных цепях, если не оговорено иное, - это напряжение между выводами первого гасящего полюса, так как это напряжение обычно выше, чем на каждом из двух других полюсов.
    [ ГОСТ Р 52565-2006]

    переходное восстанавливающееся напряжение
    ПВН

    Восстанавливающееся напряжение в период времени, когда оно имеет заметно выраженный переходный характер.
    Примечания
    1 Переходное восстанавливающееся напряжение может быть колебательным или неколебательным или их комбинацией в зависимости от характеристик цепи и коммутационного аппарата. Оно отражает также смещение напряжения нейтрали многофазной цепи.
    2 Если не оговорено иначе, переходное восстанавливающееся напряжение в трехфазных цепях представляет собой напряжение между выводами первого отключающего полюса, так как это напряжение обычно более высокое, чем то, которое появляется между выводами каждого из двух других полюсов
    [ ГОСТ Р 52726-2007]

    восстанавливающееся напряжение
    1)
    Напряжение в период, когда оно носит в значительной степени переходный характер.
    Примечание. Переходное напряжение может быть колебательным или неколебательным, или носить смешанный характер в зависимости от характеристик цепи, коммутационного аппарата или плавкого предохранителя. Сюда относится и сдвиг напряжения нейтрали многофазной цепи.
    МЭК 60050(441-17-26)
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]
    1)  Должно быть переходное восстанавливающееся напряжение
    [Интент]

    восстанавливающееся напряжение 1)
    Напряжение в период, когда оно носит в значительной степени переходный характер.
    Примечания
    1 Это переходное напряжение может быть колебательным или неколебательным, или их комбинацией, в зависимости от характеристик цепи и выключателя. При этом учитывают сдвиг напряжения нейтрали многофазной цепи.
    2 Восстанавливающееся напряжение в трехфазных цепях в отсутствие других указаний — это напряжение между выводами первого полюса, отключающего ток, поскольку оно, как правило, выше, чем между выводами каждого из двух других полюсов
    (МЭС 441-17-26)
    [ ГОСТ Р 50345-99( МЭК 60898-95)]
    1)  Должно быть переходное восстанавливающееся напряжение
    [Интент]

    EN

    transient recovery voltage
    T.R.V. (abbreviation)
    the recovery voltage during the time in which it has a significant transient character
    NOTE 1 – The transient recovery voltage may be oscillatory or non-oscillatory or a combination of these depending on the characteristics of the circuit and the switching device. It includes the voltage shift of the neutral of a polyphase circuit.
    NOTE 2 – The transient recovery voltages in three-phase circuits is, unless otherwise stated, that across the first pole to clear, because this voltage is generally higher than that which appears across each of the other two poles.
    [IEV number 441-17-26 ]

    FR

    tension transitoire de rétablissement
    T.T.R. (abréviation)
    tension de rétablissement pendant le temps où elle présente un caractère transitoire appréciable
    NOTE 1 – La tension transitoire de rétablissement peut être oscillatoire ou non oscillatoire ou être une combinaison de celles-ci selon les caractéristiques du circuit et de l'appareil de connexion. Elle tient compte de la variation du potentiel du point neutre du circuit polyphasé.
    NOTE 2 – Sauf spécification contraire, la tension transitoire de rétablissement pour les circuits triphasés est la tension aux bornes du premier pôle qui coupe, car cette tension est généralement plus élevée que celle qui apparaît aux bornes de chacun des deux autres pôles.
    [IEV number 441-17-26 ]

    Тематики

    • выключатель, переключатель
    • высоковольтный аппарат, оборудование...

    Синонимы

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Einschwingspannung

  • 16 positive Elektrode

    1. положительный электрод

     

    положительный электрод
    -
    [IEV number 151-13-05]

    EN

    positive electrode
    for a device having two electrodes, that electrode having the higher electric potential
    NOTE – In some cases (e.g. electronic tubes and semiconductor devices), the term "positive electrode" is applied to one or another electrode, depending on the electric operating condition of the device. In other cases (e.g. electrochemical cells), the term "positive electrode" is assigned to a specific electrode.
    [IEV number 151-13-05]

    FR

    électrode positive, f
    pour un dispositif à deux électrodes, celle des électrodes dont le potentiel électrique est le plus élevé
    NOTE – Dans certains cas (par exemple pour les tubes électroniques et les dispositifs semiconducteurs), le terme "électrode positive" désigne l’une ou l’autre électrode selon le régime électrique du dispositif. Dans d’autres cas (par exemple pour les éléments électrochimiques), le terme "électrode positive" désigne une électrode particulière.
    [IEV number 151-13-05]

    EN

    DE

    FR

    • électrode positive, f

    Немецко-русский словарь нормативно-технической терминологии > positive Elektrode

  • 17 Tornado

    1. торнадо

     

    торнадо

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    tornado
    A rapidly rotating column of air developed around a very intense low-pressure centre. It is associated with a dark funnel-shaped cloud and with extremely violent winds (>300km/h) blowing in a counterclockwise spiral, but accompanied by violent downdraughts. The precise mechanisms are not fully understood but the following atmospheric conditions appear to be necessary for tornado development: a layer of warm moist air at low altitude; a layer of dry air at higher altitude with an inversion of temperature at about 1.000 m; a triggering mechanism, usually in the form of an active, intense cold front or solar heating of the ground which will create a vortex. (Source: WHIT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Tornado

  • 18 Freileitungsstützisolator

    1. штыревой линейный изолятор

     

    штыревой линейный изолятор
    Линейный изолятор, состоящий из изоляционной части с арматурой в виде штыря или крюка.
    Примечание. Изоляционная часть может состоять из одной или нескольких соединенных вместе деталей.
    [ ГОСТ 27744-88]

    EN

    pin insulator
    rigid insulator consisting of an insulating component intended to be mounted rigidly on a supporting structure by means of a pin passing up inside the insulating component which consists of one or more pieces of insulating material permanently connected together
    [IEV number 471-03-06]

    FR

    isolateur rigide à tige
    isolateur rigide composé d’une partie isolante destinée à être montée de façon rigide sur un support au moyen d’une tige pénétrant à l’intérieur de la partie isolante; il est constitué d’une ou plusieurs pièces isolantes assemblées de façon permanente
    [IEV number 471-03-06]

    0845

    17 - Ребро изолятора
    21 - Вылет ребра изолятора
    23 - Головка изолятора
    24 - Паз изолятора
    25 - Шейка изолятора
    72 - Штырь изолятора

    4378

    Штыревые изоляторы высокого напряжения состоят из двух фарфоровых деталей. Последние жестко соединяются друг с другом с помощью цементо-песчаного состава. Штыревые изоляторы армируются на металлических штырях, закрепляемых на траверсах опор. Все штыревые изоляторы обеспечивают жесткое крепление проводов на опорах.

    [ http://sfel.narod.ru/Database/Izolators/Stirevie_lv_hv.htm]


    Параллельные тексты EN-RU

    Pin Insulator

    The pin insulator gets its name from the fact that it is supported on a pin.

    The pin holds the insulator, and the insulator has the conductor tied to it.

    Pin insulators are made of either glass or porcelain.

    The glass insulator is always one solid piece.

    The porcelain insulator is also a one-piece insulator when used with low-voltage lines but will consist of two, three, or four layers cemented together to form a rigid unit when used on higher voltages.


    [ http://constructionmanuals.tpub.com/14026/css/14026_100.htm]

    Штыревой линейный изолятор

    Данный изолятор называют штыревым потому что он крепится на штыре.

    Штырь удерживает изоляционную часть, к которой прикрепляют провод.

    Изоляционную часть изготовляют из стекла или фарфора.

    Стеклянная изоляционная часть всегда состоит из одной детали.

    Фарфоровая изоляционная часть штыревого изолятора, применяемого в низковольтной линии электропередачи, также состоит из одной детали. В высоковольтных линиях применяют фарфоровые изоляционные части, состоящие из двух, трех или четырех жестко скрепленных деталей.


    [Перевод Интент]



     

    Тематики

    Классификация

    >>>

    Обобщающие термины

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Freileitungsstützisolator

  • 19 Stützenisolator, m

    1. штыревой линейный изолятор

     

    штыревой линейный изолятор
    Линейный изолятор, состоящий из изоляционной части с арматурой в виде штыря или крюка.
    Примечание. Изоляционная часть может состоять из одной или нескольких соединенных вместе деталей.
    [ ГОСТ 27744-88]

    EN

    pin insulator
    rigid insulator consisting of an insulating component intended to be mounted rigidly on a supporting structure by means of a pin passing up inside the insulating component which consists of one or more pieces of insulating material permanently connected together
    [IEV number 471-03-06]

    FR

    isolateur rigide à tige
    isolateur rigide composé d’une partie isolante destinée à être montée de façon rigide sur un support au moyen d’une tige pénétrant à l’intérieur de la partie isolante; il est constitué d’une ou plusieurs pièces isolantes assemblées de façon permanente
    [IEV number 471-03-06]

    0845

    17 - Ребро изолятора
    21 - Вылет ребра изолятора
    23 - Головка изолятора
    24 - Паз изолятора
    25 - Шейка изолятора
    72 - Штырь изолятора

    4378

    Штыревые изоляторы высокого напряжения состоят из двух фарфоровых деталей. Последние жестко соединяются друг с другом с помощью цементо-песчаного состава. Штыревые изоляторы армируются на металлических штырях, закрепляемых на траверсах опор. Все штыревые изоляторы обеспечивают жесткое крепление проводов на опорах.

    [ http://sfel.narod.ru/Database/Izolators/Stirevie_lv_hv.htm]


    Параллельные тексты EN-RU

    Pin Insulator

    The pin insulator gets its name from the fact that it is supported on a pin.

    The pin holds the insulator, and the insulator has the conductor tied to it.

    Pin insulators are made of either glass or porcelain.

    The glass insulator is always one solid piece.

    The porcelain insulator is also a one-piece insulator when used with low-voltage lines but will consist of two, three, or four layers cemented together to form a rigid unit when used on higher voltages.


    [ http://constructionmanuals.tpub.com/14026/css/14026_100.htm]

    Штыревой линейный изолятор

    Данный изолятор называют штыревым потому что он крепится на штыре.

    Штырь удерживает изоляционную часть, к которой прикрепляют провод.

    Изоляционную часть изготовляют из стекла или фарфора.

    Стеклянная изоляционная часть всегда состоит из одной детали.

    Фарфоровая изоляционная часть штыревого изолятора, применяемого в низковольтной линии электропередачи, также состоит из одной детали. В высоковольтных линиях применяют фарфоровые изоляционные части, состоящие из двух, трех или четырех жестко скрепленных деталей.


    [Перевод Интент]



     

    Тематики

    Классификация

    >>>

    Обобщающие термины

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Stützenisolator, m

  • 20 alkalische Batterie

    1. щелочной элемент питания

     

    щелочной элемент питания

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    alkaline battery
    A primary cell that uses an alkaline electrolyte, usually potassium hydroxide, and delivers about 1.5 volts at much higher current rates than the common carbon-zinc cell. Also known as alkaline-manganese cell. (Source: MGH)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > alkalische Batterie

См. также в других словарях:

  • Higher education in Portugal — is divided into two main subsystems: university and polytechnic education. It is provided in autonomous public universities, private universities, public or private polytechnic institutions and higher education institutions of other types. Higher …   Wikipedia

  • Higher education in Ontario — includes postsecondary education and skills training regulated by the Ministry of Training, Colleges, and Universities and provided by universities, colleges of applied arts and technology, and private career colleges.Ministry of Training,… …   Wikipedia

  • Higher education in Canada — describes the constellation of provincial higher education systems in Canada and their relationships with the federal government. A federation now comprising ten provinces and three territories, Canada is a parliamentary democracy and a… …   Wikipedia

  • Higher education in British Columbia — is delivered by 26 publicly funded institutions that are composed of eleven universities, twelve colleges, and three institutes. This is in addition to three private universities, five private colleges, and six theological colleges. There are… …   Wikipedia

  • Higher education in China — is continuously growing, changing and developing. There are over 2,000 universities and colleges, with more than six million enrollments in total.[1] China has set up a degree system, including Bachelors, Masters and Doctoral degrees that are… …   Wikipedia

  • Higher education in Prince Edward Island — (also referred to as post secondary education) refers to education provided by higher education institutions in the Canadian province of Prince Edward Island. In Canada, education is the responsibility of the provinces and there is no Canadian… …   Wikipedia

  • Higher education in Nova Scotia — (also referred to as post secondary education) refers to education provided by higher education institutions in the Canadian province of Nova Scotia. In Canada, education is the responsibility of the provinces and there is no Canadian federal… …   Wikipedia

  • Higher education accreditation — is a type of quality assurance process under which services and operations of post secondary educational institutions or programs are evaluated by an external body to determine if applicable standards are met. If standards are met, accredited… …   Wikipedia

  • Higher self — is a term associated with multiple belief systems and with eternal, conscious, and intelligent being. The term has been popularized by new age and new religious movements (Neopaganism); however, it is used by many different groups and can… …   Wikipedia

  • Higher education in Quebec — is an education system that is unique from other provinces in Canada. Instead of entering university or college directly from high school, Quebec students enter post secondary studies at the collegiate level into institutions called Collège… …   Wikipedia

  • Higher education in New Brunswick — (also referred to as postsecondary education) refers to education provided by higher education institutions in the Canadian province of New Brunswick. Higher education has a rich history in New Brunswick, including the first English speaking… …   Wikipedia

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»