-
1 крепление типа Y
крепление типа Y
Такой способ крепления шнура питания, при котором он может быть заменен только изготовителем, его ремонтной службой или аналогичным квалифицированным лицом.
Примечание. Шнур питания может быть специально подготовленным и имеющимся только у изготовителя или его представителя. Специально подготовленный шнур может также включать часть прибора.
[ ГОСТ Р 52161. 1-2004 ( МЭК 60335-1: 2001)]
присоединение типа Y
-
[IEV number 442-01-35]EN
type Y attachment
method of attachment of the supply cord such that any replacement is intended to be made by the manufacturer, its service agent or similar qualified person
[IEC 60335-1, ed. 4.0 (2001-05)]
type Y attachment
a method of attachment such that the flexible cable or cord can only be replaced with the aid of special purpose tools normally available to the manufacturer or his agent
NOTE – Such a method of attachment can be used either with common flexible cable and cord or with special cables or cords.
[IEV number 442-01-35]FR
fixation du type Y
méthode de fixation du câble d'alimentation telle que le remplacement de celui-ci est prévu pour être réalisé par le fabricant, son service après vente ou une personne de qualification similaire
[IEC 60335-1, ed. 4.0 (2001-05)]
fixation du type Y
méthode de fixation telle que le câble souple puisse être remplacé seulement avec l'aide d'outils spéciaux normalement disponibles chez le constructeur ou son agent
NOTE – Une telle méthode de fixation peut être utilisée soit avec des câbles ordinaires, soit avec des câbles spéciaux.
[IEV number 442-01-35]Тематики
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > крепление типа Y
-
2 крепление типа Х
крепление типа Х
Такой способ крепления шнура питания, при котором он может быть легко заменен.
Примечание. Шнур питания может быть специально подготовленным и имеющимся только у изготовителя или его представителя. Специально подготовленный шнур может также включать часть прибора.
[ ГОСТ Р 52161. 1-2004 ( МЭК 60335-1: 2001)]
крепление типа Х
Способ крепления, при котором шнур питания может быть легко заменен без применения специального инструмента, используя стандартные шнуры питания без специальной подготовки.
[ГОСТ IЕС 60730-1-2011]
присоединение типа Х
-
[IEV number 442-01-34]EN
type X attachment
method of attachment of the supply cord such that it can easily be replaced
NOTE - The supply cord may be specially prepared and only available from the manufacturer or its service agent. A specially prepared cord may include a part of the appliance.
[IEC 60335-1, ed. 4.0 (2001-05)]
type X attachment
a method of attachment such that the flexible cable or cord can be replaced without the aid of special purpose tools, by a flexible cable or cord not requiring special preparation
[IEV number 442-01-34]FR
fixation du type X
méthode de fixation du câble d'alimentation telle qu'il puisse être facilement remplacé
NOTE - Le câble d'alimentation peut être spécialement préparé, et disponible seulement auprès du fabricant ou de son service après vente. Un câble spécialement préparé peut comporter une partie de l'appareil.
[IEC 60335-1, ed. 4.0 (2001-05)]
fixation du type X
méthode de fixation telle que le câble souple puisse être remplacé, sans l'aide d'outils spéciaux, par un câble ne nécessitant pas de préparation spéciale
[IEV number 442-01-34]Тематики
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > крепление типа Х
-
3 оболочка шкафа
- Schrank, m
шкаф
Оболочка, как правило, имеющая большие размеры, предназначенная для установки на полу, которая может состоять из нескольких секций, подсекций или отсеков.
Примечание - Оболочки нестандартной формы, например пульты для испытаний, считают шкафами.
[ ГОСТ Р 52796- 2007( МЭК 62208: 2002)]
EN
cabinet
free-standing and self-supporting enclosure for housing electrical and/or electronic equipment
It is usually fitted with doors and/or side panels which may or may not be removable.[IEC 60917-1, ed. 1.0 (1998-09)]
[IEV number 581-25-02]
cabinet
container that may enclose connection devices, terminations, apparatus, cabling, and equipment. It may be either wall-mounted or self-supporting
[IEC 62134-1, ed. 2.0 (2009-06)]
cubicle
empty enclosure, generally of large dimensions, and in principle of the floor standing type, which may comprise several sections, sub-sections or compartments
NOTE Enclosures with an irregular shape, such as a desk, are considered cubicles for testing purposes.
[IEC 62208, ed. 1.0 (2002-11)]R
baie
structure fermée indépendante et auto-porteuse destinée à loger du matériel électrique et/ou électronique
Elle est habituellement munie de portes et/ou de panneaux latéraux qui peuvent être amovibles ou non.[IEC 60917-1, ed. 1.0 (1998-09)]
[IEV number 581-25-02]
armoire
conteneur qui peut abriter des dispositifs de connexion, des terminaisons, des appareillages, des câblages et des équipements. Elle peut être fixée au mur ou être auto-porteuse
[IEC 62134-1, ed. 2.0 (2009-06)]
armoire
enveloppe vide, généralement de grandes dimensions et, en principe fixée au sol, qui peut comprendre plusieurs colonnes, éléments de colonne ou compartiments
NOTE Les enveloppes ayant une forme irrégulière telle qu'un pupitre sont considérées comme des armoires pour les essais.
[IEC 62208, ed. 1.0 (2002-11)]Тематики
- НКУ (шкафы, пульты,...)
EN
DE
- Schrank, m
FR
Русско-немецкий словарь нормативно-технической терминологии > оболочка шкафа
-
4 одноразовое устройство соединения проводников скручиванием
одноразовое устройство соединения проводников скручиванием
-
[IEV number 442-06-38]EN
non-reusable twist-on connecting device
Twist-on connecting device that can only be used once and which is constructed in such a way that it cannot be separated from the conductor without being completely destroyed
[IEV number 442-06-38]FR
dispositif de connexion par épissure non réutilisable
Dispositif de connexion par épissure qui ne peut être utilisé qu'une seule fois et qui est construit de telle façon qu'il ne puisse être séparé des âmes des conducteurs sans être définitivement détruit
[IEV number 442-06-38]EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > одноразовое устройство соединения проводников скручиванием
-
5 переносная розетка
переносная розетка
Розетка, предназначенная для соединения с гибким кабелем или шнуром или являющаяся частью гибкого кабеля или шнура,присоединив которую к сети можно легко перемещать с одного места на другоекоторую можно присоединить к стационарной сети и легко перемещать с одного места на другое.
[ ГОСТ Р 51322.1-99]EN
portable socket-outlet
a socket-outlet intended to be connected to, or integral with, flexible cables or cords, and which can easily be moved from one place to another while connected to the supply
[IEV number 442-03-07]FR
socle mobile de prise de courant
socle de prise de courant prévu pour être relié à, ou être intégré à, des câbles souples et qui peut être facilement déplacé lorsqu'il est relié au circuit d'alimentation
[IEV number 442-03-07]
1 - Розетка;
2 - Угловая вилка;
3 - Перносная розеткаТематики
Синонимы
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > переносная розетка
-
6 переносное оборудование
- Handgerät, n
- elektrisches Handgerät, n
переносное оборудование
Оборудование, предназначенное для переноски вручную.
[ ГОСТ Р 52319-2005( МЭК 61010-1: 2001)]
переносное оборудование
Электрическое оборудование, предназначенное для удержания руками во время его нормального использования
[ ГОСТ Р МЭК 60050-826-2009]
Переносное оборудование подразумевает оборудование, чье функционирование рассчитано на постоянную поддержку или управление руками
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
portable equipment
equipment intended to be carried by a person
NOTE - Typically portable equipment will be used as a spot-reading equipment
[IEC 60079-29-4, ed. 1.0 (2009-11)]
portable equipment
equipment which is moved while in operation or which can easily be moved from one place to another while connected to the supply
[IEC 60691, ed. 3.0 (2002-12)]
hand-held equipment
electric equipment intended to be held in the hand during normal use
[IEV number 826-16-05]FR
matériel portable
matériel conçu pour être porté par une personne
NOTE - Généralement, les matériels portables sont utilisés comme matériels à lecture intermittente
[IEC 60079-29-4, ed. 1.0 (2009-11)]
matériel mobile
matériel qui est déplacé pendant son fonctionnement ou qui peut être facilement déplacé tout en restant relié au circuit d'alimentation
[IEC 60691, ed. 3.0 (2002-12)]
matériel portatif (à main), m
matériel électrique prévu pour être tenu à la main en usage normal
[IEV number 826-16-05]Тематики
EN
DE
- elektrisches Handgerät, n
- Handgerät, n
FR
- matériel mobile
- matériel portable
- matériel portatif (à main), m
Русско-немецкий словарь нормативно-технической терминологии > переносное оборудование
-
7 реостатный пускатель
реостатный пускатель
Пускатель, оснащенный одним или несколькими сопротивлениями для достижения при пуске заданного вращающего момента двигателя и ограничения тока.
(МЭС 441-14-42)
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
rheostatic starter
starter utilizing one or several resistors for obtaining, during starting, stated motor torque characteristics and for limiting the current
NOTE - A rheostatic starter generally consists of three basic parts which may be supplied either as a composite unit or as separate units to be connected at the place of utilization:
– the mechanical switching devices for supplying the stator (generally associated with an overload protective device);
– the resistor(s) inserted in the stator or rotor circuit;
– the mechanical switching devices for cutting out the resistor(s) successively.
[IEV 441-14-42]
[IEC 60947-4-1, ed. 3.0 (2009-09)]FR
démarreur à résistances
démarreur utilisant une ou plusieurs résistances pour obtenir, au cours du démarrage, des caractéristiques données de couple de démarrage et pour limiter le courant
NOTE - Un démarreur à résistances est généralement composé de trois parties principales qui peuvent soit être fournies dans le même ensemble, soit être fournies séparément pour être raccordées entre elles sur le lieu d'utilisation:
– les appareils mécaniques de connexion pour alimentation du stator (généralement associés à un dispositif de protection contre les surcharges);
– la ou les résistances insérées dans le circuit du stator ou du rotor;
– les appareils mécaniques de connexion pour l'élimination successive de la ou des résistances.
[IEV 441-14-42]
[IEC 60947-4-1, ed. 3.0 (2009-09)]Тематики
- аппарат, изделие, устройство...
- контакторы и пускатели
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > реостатный пускатель
-
8 без нагрузки
без нагрузки
вхолостую
-
[IEV number 151-15-21]EN
no-load
qualifies an operation of a device or an electric circuit when it does not supply power, or by extension qualifies a quantity associated with this device or circuit
NOTE 1 – If the output power is electric, apparent power is meant.
NOTE 2 – A device at no-load operation does not need to be isolated.
Source: 151-15-37
[IEV number 151-15-21]FR
hors charge, qualificatif
à vide, qualificatif
qualifie le fonctionnement d'un dispositif ou d'un circuit électrique lorsqu'il ne fournit pas de puissance ou, par extension, une grandeur associée à ce dispositif ou circuit
NOTE 1 – Lorsque la puissance de sortie est électrique, il s’agit de puissance apparente.
NOTE 2 – Un dispositif peut être hors charge sans être isolé.
Source: 151-15-37
[IEV number 151-15-21]Тематики
Синонимы
EN
DE
FR
- hors charge, qualificatif
- à vide, qualificatif
Русско-немецкий словарь нормативно-технической терминологии > без нагрузки
-
9 ввод (проходной изолятор)
- Durchführung, f
ввод
Проходной изолятор, имеющий внутреннюю изоляцию из жидкого, твердого, газообразного диэлектрического материала или их комбинации.
[ ГОСТ 27744-88 ]EN
bushing
device that enables one or several conductors to pass through a partition such as a wall or a tank, and insulate the conductors from it.
NOTE 1 – The means of attachment (flange or fixing device) to the partition forms part of the bushing. The conductor may form an integral part of the bushing or be drawn into the central tube of the bushing.
NOTE 2 – The bushings may be of the following types:
- liquid-filled bushing;
- liquid-insulated bushing;
- gas-filled bushing;
- gas-insulated bushing;
- oil-impregnated paper bushing;
- resin-bonded paper bushing;
- resin-impregnated paper bushing;
- ceramic, glass or analogous inorganic material bushing;
- cast or moulded resin-insulated bushing;
- combined insulation bushing;
- compound-filled bushing;
- gas-impregnated bushing.
[IEV number 471-02-01]FR
traversée
dispositif servant à faire passer un ou plusieurs conducteurs à travers une paroi, telle qu’un mur ou une cuve, en isolant le(s) conducteur(s) de cette paroi.
NOTE 1 – Les moyens de fixation (bride ou autre dispositif) sur la paroi font partie de la traversée. Le conducteur peut être solidaire de la traversée ou démontable.
NOTE 2 – Les différentes traversées peuvent être les suivantes:
- traversée à remplissage d’un liquide;
- traversée à isolation liquide;
- traversée à remplissage de gaz;
- traversée à isolation gazeuse;
- traversée en papier imprégné d’huile;
- traversée en papier enduit de résine;
- traversée en papier imprégné de résine;
- traversée en matière céramique, en verre ou en matière inorganique analogue;
- traversée à isolation en résine coulée ou moulée;
- traversée à isolation combinée;
- traversée à remplissage de mélange;
- traversée imprégnée de gaz.
[IEV number 471-02-01]Тематики
EN
DE
- Durchführung, f
FR
Русско-немецкий словарь нормативно-технической терминологии > ввод (проходной изолятор)
-
10 вилка
вилка
Часть соединителя, имеющая штыри для осуществления контакта с розеткой и средства для электрического соединения и закрепления гибкого кабеля
[ ГОСТ Р 51322.1-99]
вилка
Часть соединителя, которая выполняется как одно целое или непосредственно прикрепляется к гибкому кабелю, подсоединяемому к аппарату или переносной розетке.
[ ГОСТ Р 51323.1-99]
вилка (кабельная вилка)
Часть соединителя, которая выполняется как одно целое и прикрепляется к гибкому кабелю, подсоединяемому к электроприбору или переносной розетке.
Примечание — Вилка кабельного соединителя аналогична вилке штепсельного соединителя
[ ГОСТ Р 51323.1-99]
вилка
-
[IEV number 442-03-01]EN
plug
the part integral with or intended to be attached directly to one flexible cable connected to the equipment or to a connector
[IEC 60309-1, ed. 4.0 (1999-02)]
plug
the part integral with or intended to be attached to one flexible cable connected to the equipment or to a connector
NOTE The plug of a cable coupler is identical to the plug of a "plug and socket-outlet".
[IEC 60309-1, ed. 4.0 (1999-02)]
plug
accessory having pins designed to engage with the contacts of a socket-outlet, also incorporating means for the electrical connection and mechanical retention of flexible cables or cords
[IEV number 442-03-01]FR
fiche
partie faisant corps avec le câble souple raccordé au matériel ou à une prise mobile ou destinée à être reliée directement à un tel câble
[IEC 60309-1, ed. 4.0 (1999-02)]
fiche
partie faisant corps avec le câble souple raccordé au matériel ou à une prise mobile ou destinée à être reliée à un tel câble
NOTE La fiche d'un prolongateur est identique à la fiche d'une prise de courant.
[IEC 60309-1, ed. 4.0 (1999-02)]
fiche
appareil pourvu de broches conçues pour s'engager dans les contacts d'un socle de prise de courant et comprenant également des pièces pour la connexion électrique et la retenue mécanique des câbles souples
[IEV number 442-03-01]Вилка (опрессованная) бытового назначения
(Кабельная) вилка (разборная) промышленного назначения
Рис. ABB1 - Розетка стационарная
2 - Вилка опрессованная
3 - Удлиннитель одноместный
4 - Соединитель штепсельный
5 - Розетка переносная опрессованная
6 - Вилка опрессованная
7 - Соединитель штепсельный
8 - Розетка приборная
9 - Удлинитель с приборной розеткой
10 - Вилка приборная
11 - Прибор
12 - Соединитель приборный
[ ГОСТ Р 51322.1-99]Форма и длина вилки должны обеспечивать ее свободное отключение рукой от соответствующей розетки.
[ ГОСТ 28244-96]
6.6.25. Вилки штепсельных соединителей должны быть выполнены таким образом, чтобы их нельзя было включать в розетки сети с более высоким номинальным напряжением, чем номинальное напряжение вилки. Конструкция розеток и вилок не должна допускать включения в розетку только одного полюса двухполюсной вилки, а также одного или двух полюсов трехполюсной вилки.
[ПУЭ]
Для осуществления соединения при помощи розетки и вилки к розетке должен подключаться источник энергии, а к вилке - ее приемник.
[ ГОСТ 12.2.007.0-75]
Тематики
Действия
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > вилка
-
11 внешний проводник
внешний проводник
-
[IEV number 442-01-37]
внешний провод
Любой кабель, гибкий шнур, токопроводящая жила или провод, часть которого выступает наружу из управляющего устройства, встроенного в шнур, из управляющего устройства с независимым монтажом или из оборудования, в (или на) котором установлено управляющее устройство.
Примечание - Такой провод может быть либо питающим, либо функциональным, либо промежуточным шнуром между различными частями оборудования, либо может быть частью стационарной электропроводки.
[ГОСТ IЕС 60730-1-2011]EN
external conductor
any cable, flexible cable or cord, core or conductor, a part of which is external to an accessory
NOTE – Such a conductor can be a supply lead or interconnecting cord between separate parts of an accessory; it can form part of the fixed wiring.
[IEV number 442-01-37]
external conductor
any cable, flexible cord, core or conductor, a part of which is external to an inline cord control, an independently mounted control or to an equipment in or on which a control is mounted
Note 1 to entry: Such a conductor may be a supply lead, a function cord or interconnecting cord between different parts of an equipment; or it may form part of the fixed wiring.
[IEC 60730-1, ed. 5.0 (2013-11)]FR
conducteur externe
tout câble souple, âme conductrice ou conducteur dont une partie est extérieure à l'appareil
NOTE – Un tel conducteur peut-être un câble d'alimentation ou un cordon de raccordement entre des parties séparées d'un appareil ou encore constituer une partie du câblage fixe.
[IEV number 442-01-37]
conducteur externe
câble souple, cordon, âme conductrice ou conducteur dont une partie sort d'un dispositif de commande intercalé, d'un dispositif de commande à montage indépendant ou d'un matériel dans ou sur lequel un dispositif de commande est monté
Note 1 à l'article: Un tel conducteur peut soit être un câble d'alimentation, un câble fonctionnel ou un cordon de raccordement entre différentes parties d'un appareil, soit constituer une partie du câblage fixe d'un matériel.
[IEC 60730-1, ed. 5.0 (2013-11)]Тематики
- электротехника, основные понятия
Синонимы
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > внешний проводник
-
12 воздушная линия электропередачи
воздушная линия электропередачи
ВЛ
Линия электропередачи, провода которой поддерживаются над землей с помощью опор, изоляторов.
[ ГОСТ 24291-90]
воздушная линия электропередачи
Устройство для передачи электроэнергии по проводам, расположенным на открытом воздухе и прикрепленным с помощью изоляторов и арматуры к опорам или кронштейнам и стойкам на инженерных сооружениях (мостах, путепроводах и т. п.). За начало и конец воздушной линии электропередачи принимаются линейные порталы или линейные вводы распределительного устройства (далее - РУ), а для ответвлений - ответвительная опора и линейный портал или линейный ввод РУ.
[Правила технической эксплуатации электроустановок потребителей. Министерство энергетики РФ. 2003 г.]
линия электропередачи воздушная
Линия электропередачи, расположенная на открытом воздухе, провод которой прикреплён к опорам при помощи изоляторов и арматуры
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]
воздушная линия электропередачи
Устройство для передачи электроэнергии по проводам, расположенным на открытом воздухе и прикрепленным с помощью изоляторов и арматуры к опорам или кронштейнам и стойкам на инженерных сооружениях (мостах, путепроводах и т.п.). За начало и конец воздушной линии электропередачи принимаются линейные порталы или линейные вводы РУ, а для ответвлений - ответвительная опора и линейный портал или линейный ввод РУ.
[ПОТ Р М-016-2001]
[РД 153-34.0-03.150-00]
воздушные линии электропередачи
ВЛ
ВЛЭП
Конструкции для передачи электроэнергии на расстояние по проводам. Основными конструктивными элементами ВЛ являются провода, тросы, опоры, изоляторы и линейная арматура. Провода служат для передачи электроэнергии. В верхней части опор над проводами для защиты ВЛ от грозовых перенапряжений монтируют грозозащитные тросы. Опоры поддерживают провода и тросы на определенной высоте над уровнем земли или воды. Изоляторы изолируют провода от опоры. С помощью линейной арматуры провода закрепляются на изоляторах, а изоляторы на опорах. В некоторых случаях провода ВЛ с помощью изоляторов и линейной арматуры прикрепляются к кронштейнам инженерных сооружений.
[ http://www.energo-konsultant.ru/termini]
воздушная линия
-
[IEV number 151-12-33]EN
overhead line
line with one or more conductors or a cable supported above ground by appropriate means
NOTE 1 – An overhead line may consist of only one conductor when the circuit is closed by the Earth.
NOTE 2 – An overhead line may be constructed with bare conductors, generally supported by insulators, or with insulated conductors.
NOTE 3 – The concept of overhead line generally includes the supporting elements.
Source: 466-01-02 MOD, 601-03-04 MOD
[IEV number 151-12-33]
overhead power line
Suspended cables by which electrical power is distributed throughout a country. (Source: UVAROVa)
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]FR
ligne aérienne, f
ligne comportant un ou plusieurs conducteurs ou un câble maintenus au-dessus du sol par des supports appropriés
NOTE 1 – Une ligne aérienne peut être formée d’un seul conducteur lorsque le circuit est fermé par la Terre.
NOTE 2 – Une ligne aérienne peut être constituée de conducteurs nus, généralement maintenus au moyen d’isolateurs, ou de conducteurs avec isolation.
NOTE 3 – Le concept de ligne aérienne inclut généralement les supports.
Source: 466-01-02 MOD, 601-03-04 MOD
[IEV number 151-12-33]В сельской местности, в малых городах и поселках потребители получают питание в основном по воздушным ЛЭП.
[Макаров Е.Ф. Справочник по электрическим сетям 0,4-35 кВ и 110-1150 кВ]Тематики
Синонимы
EN
- aerial power line
- overhead line
- overhead network
- overhead power line
- overhead power transmission line
DE
FR
51 воздушная линия электропередачи; ВЛ
Линия электропередачи, провода которой поддерживаются над землей с помощью опор, изоляторов
601-03-04
de Freileitung
en overhead line
fr ligne aérienne
Источник: ГОСТ 24291-90: Электрическая часть электростанции и электрической сети. Термины и определения оригинал документа
Русско-немецкий словарь нормативно-технической терминологии > воздушная линия электропередачи
-
13 встроенный выключатель
встроенный выключатель
-
[IEV number 442-04-01]EN
incorporated switch
a switch intended for incorporation in or on an appliance, which however can be tested separately
[IEV number 442-04-01]FR
interrupteur incorporé
interrupteur destiné à être incorporé dans ou monté sur un appareil d'utilisation, mais qui peut être essayé indépendamment de ce dernier
[IEV number 442-04-01]Тематики
- аппарат, изделие, устройство...
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > встроенный выключатель
-
14 входное полное сопротивление
входное полное сопротивление
-
[IEV number 312-06-18]EN
input impedance
impedance of the input circuit measured between the input terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the input circuit is such that the instantaneous value of the current flowing into the input terminals is a non-linear function of the instantaneous value of the input voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual input circuit, is sometimes called the "equivalent input impedance".
[IEV number 312-06-18]FR
impédance du circuit d'entrée
impédance du circuit d'entrée entre les bornes d'entrée dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit d'entrée est tel que la valeur instantanée du courant traversant les bornes d'entrée est une fonction non linéaire de la valeur instantanée de la tension d'entrée dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit d'entrée réel, est parfois appelée "impédance équivalente d'entrée".
[IEV number 312-06-18]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > входное полное сопротивление
-
15 выдвижная часть
выдвижная часть
Съемная часть, которая может быть перемещена из присоединенного положения либо в отсоединенное положение, либо в испытательное положение, оставаясь механически соединенной с НКУ.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
выдвижная неотделяемая часть
Часть СНКУ, которая может быть либо отсоединена от него, либо установлена в испытательное положение, оставаясь механически соединенной с СНКУ.
[ ГОСТ Р МЭК 61439.2-2012]EN
withdrawable part (of an assembly)
a removable part of an assembly that can be moved to one or more positions in which an isolating distance or a segregation between open contacts is established while the part remains mechanically attached to the assembly
NOTE – The isolating distance or the segregation always relates to the main circuit. It may or may not refer to the auxiliary circuits or to control circuits.
[IEV number 441-13-09]
withdrawable part
removable part intended to be moved from the connected position to the isolated position and to a test position, if any, whilst remaining mechanically attached to the PSC-assembly
[IEC 61439-2, ed. 2.0 (2011-08)]FR
partie débrochable (d'un ensemble)
partie amovible d'un ensemble qui, tout en demeurant reliée mécaniquement à l'ensemble peut être déplacée jusqu'à la ou l'une des positions établissant une distance de sectionnement ou un cloisonnement métallique entre contacts ouverts
NOTE – Cette distance de sectionnement ou ce cloisonnement métallique concerne toujours le circuit principal. Elle peut concerner ou non les circuits auxiliaires ou les circuits de commande.
[IEV number 441-13-09]
partie débrochable
partie amovible prévue pour être déplacée de la position raccordée à la position de sectionnement et à une éventuelle position d'essai tout en restant mécaniquement reliée à l'ensemble EAP
[IEC 61439-2, ed. 2.0 (2011-08)]
7.6.4.2 Блокировка и замки для выдвижных частей
Как правило, выдвижные части должны иметь устройство, гарантирующее передвижение их в разные положения только после отключения главной цепи.
Для предотвращения недозволенных операций выдвижные части должны иметь замки или запоры, фиксирующие их в одном или более положениях.
[ ГОСТ 22789-94( МЭК 439-1-85)]
Рис. Schneider Electric Параллельные тексты EN-RUThe modularity of the Blokset functional switchboards means you can modify or upgrade them with ease to adapt to your changing processes.
The withdrawable drawers let you make these upgrades while the equipment is energised, without cutting switchboard supply and in complete safety. The withdrawable drawers have 3 positions: connected, disconnected and safe testing.
[Schneider Electric]НКУ Blokset имеет модульную конструкцию, что позволяет в случае изменения технологического процесса легко изменять или модернизировать такое НКУ.
Выдвижные ящики позволяют проводить совершенно безопасно модернизацию НКУ без отключения питания НКУ и электроустановки. Выдвижные ящики имеют три положения: присоединенное, отсоединенное и безопасное испытательное.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Синонимы
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > выдвижная часть
16 выходное полное сопротивление
выходное полное сопротивление
-
[IEV number 312-06-19]EN
output impedance
impedance of the output circuit measured between the output terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the output circuit is such that the instantaneous value of the current flowing into the output terminals is a non-linear function of the instantaneous value of the output voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual output circuit, is sometimes called the "equivalent output impedance".
[IEV number 312-06-19]FR
impédance du circuit de sortie
impédance du circuit de sortie entre les bornes de sortie dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit de sortie est tel que la valeur instantanée du courant traversant les bornes de sortie est une fonction non linéaire de la valeur instantanée de la tension de sortie dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit de sortie réel, est parfois appelée "impédance équivalente de sortie".
[IEV number 312-06-19]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > выходное полное сопротивление
17 генератор развертки в режиме свободных колебаний
генератор развертки в режиме свободных колебаний
-
[IEV number 314-06-04]EN
free-running time base
time base running periodically, even in the absence of a signal
NOTE – A free-running time base can be synchronized or not. The synchronization can be internal or external.
[IEV number 314-06-04]FR
base de temps relaxée
base de temps assurant un balayage périodique, même en l'absence de signal
NOTE – Une base de temps relaxée peut être synchronisée ou non. La synchronisation peut être interne ou externe.
[IEV number 314-06-04]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > генератор развертки в режиме свободных колебаний
18 гибкая труба
гибкая труба
-
[IEV number 442-02-10]EN
flexible conduit
a conduit which can be bent by hand, with a reasonable small force, and which is intended to flex frequently throughout its life
[IEV number 442-02-10]FR
conduit souple
conduit qui peut être cintré à la main, avec une force raisonnablement faible et qui est destiné à être fréquemment plié pendant sa durée de vie
[IEV number 442-02-10]Тематики
- электропроводка, электромонтаж
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > гибкая труба
19 жесткая труба
жесткая труба
-
[IEV number 442-02-07]EN
rigid conduit
a conduit which cannot be bent, or which can only be bent with the help of a mechanical aid, with or without special treatment
[IEV number 442-02-07]FR
conduit rigide
conduit qui ne peut être cintré, ou qui ne peut l'être qu'à l'aide d'un moyen mécanique, avec ou sans traitement spécial
[IEV number 442-02-07]Тематики
- электропроводка, электромонтаж
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > жесткая труба
20 зажим под гайку
зажим под гайку
Зажим винтового типа, в котором проводник прижимают гайкой. Силу прижима могут прилагать непосредственно фасонной гайкой или через промежуточную деталь, например шайбу, прижимную пластину или устройство для самоотвинчивания.
[ ГОСТ Р 51324.1-2005]EN
stud terminal
terminal with screw clamping in which the conductor is clamped under a nut. The clamping pressure may be applied directly by a suitably shaped nut or through an intermediate part, such as a washer, clamping plate or anti-spread device
[IEC 60669-1, ed. 3.0 (1998-02)]
stud terminal
a screw-type terminal in which the conductor is clamped under a nut
NOTE – The clamping pressure can be applied directly by a suitably shaped nut or through an intermediate part, such as a washer, a clamping plate or an anti-spread device.
[IEV number 442-06-23]FR
borne à goujon fileté
organe de serrage à vis dans lequel l'âme d'un conducteur est serrée sous un écrou. La pression de serrage peut être appliquée directement par un écrou de forme appropriée ou au moyen d'une partie intermédiaire, telle qu'une rondelle, une plaquette ou un dispositif empêchant le conducteur ou ses brins de s'échapper
[IEC 60669-1, ed. 3.0 (1998-02)]
borne à goujon fileté
borne à vis dans laquelle l'âme d'un conducteur est serrée sous un écrou
NOTE – La pression de serrage peut être appliquée directement par un écrou de forme appropriée ou au moyen d'une partie intermédiaire, tel qu'une rondelle, une plaquette ou un dispositif empêchant le conducteur ou ses brins de s'échapper.
[IEV number 442-06-23]Тематики
- вывод, зажим электрический
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > зажим под гайку
См. также в других словарях:
Etre — Être Voir « être » sur le Wiktionnaire … Wikipédia en Français
Etre et Temps — Être et Temps Être et Temps (Sein und Zeit, 1927) est une œuvre du philosophe allemand Martin Heidegger. Cette œuvre est conçue comme une première partie d un projet qui ne fut pas mené à terme. Elle marque un tournant important de la philosophie … Wikipédia en Français
Être et temps — (Sein und Zeit, 1927) est une œuvre du philosophe allemand Martin Heidegger. Cette œuvre est conçue comme une première partie d un projet qui ne fut pas mené à terme. Elle marque un tournant important de la philosophie continentale. Emmanuel… … Wikipédia en Français
ÊTRE (philosophie) — La «question sur l’être» traverse l’histoire de la philosophie. Pour certains, elle serait le motif même de cette histoire, les différences entre les philosophies découlant, au plus profond, de la diversité des réponses à la question sur l’être.… … Encyclopédie Universelle
être — 1. (ê tr ), je suis, tu es, il est, nous sommes, vous êtes, ils sont ; j étais ; je fus ; je serai ; je serais ; sois, qu il soit, soyons, soyez, qu ils soient ; que je sois, que tu sois, qu il soit, que nous soyons, que vous soyez, qu ils soient … Dictionnaire de la Langue Française d'Émile Littré
être perdu — ● être perdu verbe passif Ne pas pouvoir être sauvé, être condamné : Le blessé est perdu. Être écarté de tout centre, être isolé : Un coin perdu de province. Être isolé et ne pas pouvoir être localisé : Un cri perdu dans la nuit. Être à jeter… … Encyclopédie Universelle
Etre et Avoir — Être et avoir Être et avoir Réalisation Nicolas Philibert Musique Philippe Hersant Photographie Christian Guy Montage Nicolas Philibert Production Gilles Sandoz, Serge Lalou Société de production Maïa Films, Les Films d i … Wikipédia en Français
Etre et avoir — Être et avoir Être et avoir Réalisation Nicolas Philibert Musique Philippe Hersant Photographie Christian Guy Montage Nicolas Philibert Production Gilles Sandoz, Serge Lalou Société de production Maïa Films, Les Films d i … Wikipédia en Français
Être Et Avoir — Réalisation Nicolas Philibert Musique Philippe Hersant Photographie Christian Guy Montage Nicolas Philibert Production Gilles Sandoz, Serge Lalou Société de production Maïa Films, Les Films d i … Wikipédia en Français
Être Et avoir — Réalisation Nicolas Philibert Musique Philippe Hersant Photographie Christian Guy Montage Nicolas Philibert Production Gilles Sandoz, Serge Lalou Société de production Maïa Films, Les Films d i … Wikipédia en Français
Être et Avoir — Réalisation Nicolas Philibert Musique Philippe Hersant Photographie Christian Guy Montage Nicolas Philibert Production Gilles Sandoz, Serge Lalou Société de production Maïa Films, Les Films d i … Wikipédia en Français
Перевод: с русского на немецкий
с немецкого на русский- С немецкого на:
- Русский
- С русского на:
- Все языки
- Английский
- Испанский
- Итальянский
- Немецкий
- Французский