-
41 flush conductor
-
42 two-conductor insulated wiring system
двухпроводная изолированная от земли проводка
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
Англо-русский словарь нормативно-технической терминологии > two-conductor insulated wiring system
-
43 partially insulated protective conductor terminal block
2.2 частично изолированная клеммная колодка защитных проводников (partially insulated protective conductor terminal block): Клеммная колодка защитных проводников, изолированная только от частей, находящихся под напряжением, других устройств, но не от установочной панели.
Источник: ГОСТ Р 50030.7.2-2009: Аппаратура распределения и управления низковольтная. Часть 7.2. Электрооборудование вспомогательное. Клеммные колодки защитных проводников для присоединения медных проводников оригинал документа
Англо-русский словарь нормативно-технической терминологии > partially insulated protective conductor terminal block
-
44 concentric conductor
концентрическая жила
концентрический проводник
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
Синонимы
EN
концентрическая токопроводящая жила
токопроводящая жила, окружающая одну или несколько изолированных жил
[IEV number 461-01-17]EN
concentric conductor
conductor so constructed as to surround one or more insulated conductors
[IEV number 461-01-17]FR
âme concentrique
âme réalisée de façon à entourer un ou plusieurs conducteurs isolés
[IEV number 461-01-17]
Тематики
- кабели, провода...
EN
DE
- konzentrischer Leiter, m
FR
Англо-русский словарь нормативно-технической терминологии > concentric conductor
-
45 single conductor cable
одножильный кабель
кабель, имеющий только одну изолированную жилу
Примечание. Французский термин «cable unipolaire» более приемлем для обозначения кабеля, составляющего одну из фаз многофазной системы
[ IEV ref 461-06-02]EN
single-conductor cable
single-core cable
cable having only one core
Note – The French term «câble unipolaire» is more specifically used to designate the cable constituting one of the phases of a multiphase system.
[ IEV ref 461-06-02]FR
câble à un conducteur
câble unipolaire
câble comprenant un seul conducteur isolé
Note – Le terme câble unipolaire est plus particulièrement utilisé pour désigner le câble constituant l'une des phases d'un système polyphasé.
[ IEV ref 461-06-02]Параллельные тексты EN-RU
The cables must be multi strand, single core and PVC insulated.
[Schneider Electric]Должны применяться одножильные кабели с многопроволочной жилой с ПВХ изоляцией.
[Перевод Интент]
Рис. Schneider Electric
Core - (токопроводящая) жила;
Insulator - изоляция жилы;
Protective Sheath - оболочка кабеля.Тематики
- кабели, провода...
EN
- monoconductor cable
- single cable
- single conductor cable
- single core cable
- single-conductor cable
- single-core cable
- single-pole cable
DE
- einadriges Kabel, n
- Einleiterkabel, n
FR
Англо-русский словарь нормативно-технической терминологии > single conductor cable
46 single-conductor cable
одножильный кабель
кабель, имеющий только одну изолированную жилу
Примечание. Французский термин «cable unipolaire» более приемлем для обозначения кабеля, составляющего одну из фаз многофазной системы
[ IEV ref 461-06-02]EN
single-conductor cable
single-core cable
cable having only one core
Note – The French term «câble unipolaire» is more specifically used to designate the cable constituting one of the phases of a multiphase system.
[ IEV ref 461-06-02]FR
câble à un conducteur
câble unipolaire
câble comprenant un seul conducteur isolé
Note – Le terme câble unipolaire est plus particulièrement utilisé pour désigner le câble constituant l'une des phases d'un système polyphasé.
[ IEV ref 461-06-02]Параллельные тексты EN-RU
The cables must be multi strand, single core and PVC insulated.
[Schneider Electric]Должны применяться одножильные кабели с многопроволочной жилой с ПВХ изоляцией.
[Перевод Интент]
Рис. Schneider Electric
Core - (токопроводящая) жила;
Insulator - изоляция жилы;
Protective Sheath - оболочка кабеля.Тематики
- кабели, провода...
EN
- monoconductor cable
- single cable
- single conductor cable
- single core cable
- single-conductor cable
- single-core cable
- single-pole cable
DE
- einadriges Kabel, n
- Einleiterkabel, n
FR
Англо-русский словарь нормативно-технической терминологии > single-conductor cable
47 Milliken conductor
расщепленная токопроводящая жила
скрученная токопроводящая жила, состоящая из ряда скрученных фасонных токопроводящих жил, имеющих незначительную изоляцию друг от друга
[IEV number 461-01-15]EN
Milliken conductor
stranded conductor comprising an assembly of shaped stranded conductors, lightly insulated from each other
[IEV number 461-01-15]FR
âme segmentée
âme câblée composée d'éléments toronnés profilés, faiblement isolés les uns par rapport aux autres
[IEV number 461-01-15]
Тематики
- кабели, провода...
EN
DE
- Millikenleiter, m
- Segmentleiter, m
FR
Англо-русский словарь нормативно-технической терминологии > Milliken conductor
48 two-conductor insulated wiring system
Электротехника: двухпроводная изолированная от земли проводкаУниверсальный англо-русский словарь > two-conductor insulated wiring system
49 изолированнаяя жила
insulated conductorБольшой англо-русский и русско-английский словарь > изолированнаяя жила
50 изолированный проводник
insulated conductorБольшой англо-русский и русско-английский словарь > изолированный проводник
51 изолированная жила
Англо-русский словарь технических терминов > изолированная жила
52 изолированный проводник
Англо-русский словарь технических терминов > изолированный проводник
53 изолированный провод
Англо-русский словарь технических терминов > изолированный провод
54 covered wire
изолированный провод
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]EN
core insulated conductor
assembly comprising a conductor and its own insulation (and screens, if any)
[IEC 61892-4, ed. 1.0 (2007-06)]
core-insulated conductor (North America)
assembly comprising a conductor and its own insulation (and screens, if any)
NOTE In North American usage, the core of a cable has been defined as the assembly of components of a cable lying under a common covering such as the sheath (jacket).
[IEC 60092-350, ed. 3.0 (2008-02)]FR
conducteur (isolé)
ensemble comprenant l'âme, son enveloppe isolante et ses écrans éventuels
Note – En Amérique du Nord le terme “core of a cable” a été défini comme l'ensemble des constituants d'un câble disposés sous un revêtement commun, tel que la gaine. L'utilisation de ce terme est déconseillée dans ce sens.
[ IEV ref 461-04-04]Рис. Schneider Electric
Параллельные тексты EN-RU
An insulated conductor is made up of a conductor core and its
insulating envelope.
[Schneider Electric]Изолированный провод состоит из токопроводящей жилы и изоляции провода.
[Перевод Интент]Тематики
- кабели, провода...
EN
- core insulated conductor
- core-insulated conductor
- covered conductor
- covered wire
- insulated conductor
DE
- Ader, f
FR
Англо-русский словарь нормативно-технической терминологии > covered wire
55 core
- ядро
- сердцевина (оптического волокна)
- сердцевина
- сердечник электротехнического изделия
- сердечник
- пеньковый сердечник стального каната
- отбирать керн
- Международная программа исследований по проблемам разрушения активной зоны ядерного реактора при аварии
- конус породы, остающийся на забое при бурении
- керн горной породы
- керн
- карандаш
- изолированная жила (термин употребляется в Северной Америке)
- жила кабеля
- жила (кабеля)
- жила
- внутренний тор
- активная зона ядерного реактора
- активная зона (ядерного реактора)
активная зона (ядерного реактора)
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва]Тематики
- электротехника, основные понятия
EN
активная зона ядерного реактора
активная зона
Часть ядерного реактора, содержащая ядерное топливо, которой происходит управляемая цепная ядерная реакция.
[ ГОСТ 23082-78]Тематики
Синонимы
EN
DE
FR
внутренний тор
Торовая или торообразная поверхность, которая является внутренней границей рабочей полости.
[ ГОСТ 19587-74]Тематики
EN
DE
токопроводящая жила
жила
Элемент кабельного изделия, предназначенный для прохождения электрического тока
[ ГОСТ 15845-80]
токопроводящая жила (кабеля)
Элемент кабеля, специфической функцией которого является передача электрического тока
[IEV number 461-01-01]
жила токопроводящая
Изолированный одно- или многопроволочный металлический проводник внутри электрического кабеля
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]
жила
-
[IEV number 151-12-37]EN
conductor (of a cable)
part of a cable which has the specific function of carrying current
[IEV number 461-01-01]
strand
one of the wires of a stranded conductor
Source: 466-10-02 MOD
[IEV number 151-12-37]FR
âme
conducteur (d'un câble) (terme déconseillé dans ce sens)
partie d'un câble dont la fonction spécifique est de conduire le courant
[IEV number 461-01-01]
brin, m
un des fils d'un conducteur câblé
Source: 466-10-02 MOD
[IEV number 151-12-37]Все жилы двухжильных кабелей должны быть одинакового сечения.
Все жилы трех- и четырехжильных кабелей должны быть одинакового сечения или одна жила должна быть меньшего сечения (нулевая или жила заземления)
Номинальное сечение, мм2
основная жила: 25
нулевая жила: 16
жила заземления: 10
Изолированные жилы многожильных кабелей должны иметь отличительную расцветку или обозначение цифрами, начиная с нуля.
[ ГОСТ 433-73]
Токопроводящие жилы должны быть изолированы поливинилхлоридным пластикатом.
Изолированные жилы должны быть скручены в кабель.
[ ГОСТ 10348-80]Недопустимые, нерекомендуемые
Тематики
- кабели, провода...
Действия
Синонимы
Сопутствующие термины
EN
- cable
- cable conductors
- conductor
- conductor core
- conductor of a cable
- conductors
- core
- electric conductor
- strand
DE
- Einzeldraht
- Leiter (eines Kabels), m
- stromführende Ader
FR
жила (кабеля)
—
[ http://slovarionline.ru/anglo_russkiy_slovar_neftegazovoy_promyishlennosti/]Тематики
EN
жила кабеля
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
изолированная жила (термин употребляется в Северной Америке)
совокупность элементов, состоящая из жилы, ее изоляции (и экранов, если они есть)
Примечание. В Северной Америке термин «core of a cable» определяется как совокупность компонентов кабеля, расположенных под общим защитным покровом, таким как оболочка. Такое применение этого термина не допустимо
[IEV number 461-04-04]EN
core
insulated conductor
assembly comprising a conductor with its own insulation (and screens if any)
NOTE – In North American usage, the core of a cable has been defined as the assembly of components of a cable lying under a common covering such as the sheath. Such usage is deprecated.
[IEV number 461-04-04]FR
conducteur (isolé)
ensemble comprenant l'âme, son enveloppe isolante et ses écrans éventuels
NOTE – En Amérique du Nord le terme “core of a cable” a été défini comme l'ensemble des constituants d'un câble disposés sous un revêtement commun, tel que la gaine. L'utilisation de ce terme est déconseillée dans ce sens.
[IEV number 461-04-04]Тематики
- кабели, провода...
EN
DE
- Ader, f
FR
карандаш
Оставшаяся после лущения часть фанерного чурака, имеющая форму цилиндра при цилиндрическом лущении или неправильного эллипса при эксцентрическом лущении.
[ ГОСТ 15812-87]Тематики
EN
FR
- noyaux de deroulage, âme
керн
В геологии - образец горной породы в виде цилиндрического столбика, извлекаемый в буровом снаряде при бурении скважины
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]Тематики
- геология, геофизика
EN
DE
FR
керн горной породы
Цилиндрический столбик горной породы, выбуриваемый из массива горных пород или штуфа.
[ ГОСТ Р 50544-93]Тематики
EN
DE
FR
конус породы, остающийся на забое при бурении
—
[ http://slovarionline.ru/anglo_russkiy_slovar_neftegazovoy_promyishlennosti/]Тематики
EN
Международная программа исследований по проблемам разрушения активной зоны ядерного реактора при аварии
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
EN
отбирать керн
бурить с отбором керна
—
[ http://slovarionline.ru/anglo_russkiy_slovar_neftegazovoy_promyishlennosti/]Тематики
Синонимы
EN
пеньковый сердечник стального каната
—
[ http://slovarionline.ru/anglo_russkiy_slovar_neftegazovoy_promyishlennosti/]Тематики
EN
сердечник
Физический элемент, на котором крепится обмотка и который может влиять на магнитный поток.
[Система неразрушающего контроля. Виды (методы) и технология неразрушающего контроля. Термины и определения (справочное пособие). Москва 2003 г.]
сердечник
Часть магнитопровода электромагнита в виде цельного или пластинчатого тела из электротехнической стали, вокруг которого располагаются обмотки
[Система неразрушающего контроля. Виды (методы) и технология неразрушающего контроля. Термины и определения (справочное пособие). Москва 2003 г.]Тематики
- виды (методы) и технология неразр. контроля
EN
сердечник электротехнического изделия
Ферромагнитная деталь, на которой или вокруг которой расположена обмотка электротехнического изделия.
[ ГОСТ 18311-80]
(магнитный) сердечник
-
[IEV number 151-14-02]EN
(magnetic) core
part of a device, composed of high-permeability material and intended to channel magnetic flux
NOTE – Generally a magnetic core is surrounded by one or more windings.
Source: 221-04-24 MOD
[IEV number 151-14-02]FR
noyau (magnétique), m
partie d'un dispositif constituée d'un matériau de perméabilité élevée et destinée à canaliser un flux magnétique
NOTE – Un noyau magnétique porte généralement un ou plusieurs enroulements.
Source: 221-04-24 MOD
[IEV number 151-14-02]Недопустимые, нерекомендуемые
Тематики
Синонимы
EN
DE
- (magnetischer) Kern
- Kern, (magnetischer)
FR
сердцевина
[ ГОСТ 28833-90]
сердцевина
Материал детали под диффузионным слоем, не затронутый воздействием окружающей активной среды.
[ ГОСТ 20495-75]Тематики
Обобщающие термины
EN
FR
сердцевина (оптического волокна)
Cветопроводящая жила из оптически более плотного материала, чем ее оболочка.
[Л.Г.Суменко. Англо-русский словарь по информационным технологиям. М.: ГП ЦНИИС, 2003.]Тематики
EN
4.3 ядро (core): Центр изображения отпечатка пальца.
Примечание - Точное расположение ядра определяется самой верхней точкой на внутреннем загнутом гребне изображения отпечатка пальца. В общем случае ядро расположено на или в пределах самого внутреннего загиба петли.
Источник: ГОСТ Р ИСО/МЭК 19794-4-2006: Автоматическая идентификация. Идентификация биометрическая. Форматы обмена биометрическими данными. Часть 4. Данные изображения отпечатка пальца оригинал документа
32. Карандаш
E. Core
F. Noyaux de deroulage, ame
Оставшаяся после лущения часть фанерного чурака, имеющая форму цилиндра при цилиндрическом лущении или неправильного эллипса при эксцентрическом лущении
Источник: ГОСТ 15812-87: Древесина клееная слоистая. Термины и определения оригинал документа
Англо-русский словарь нормативно-технической терминологии > core
56 continuous current-carrying capacity
длительная пропускная способность по току
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Англо-русский словарь нормативно-технической терминологии > continuous current-carrying capacity
57 ampacity (US)
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Англо-русский словарь нормативно-технической терминологии > ampacity (US)
58 continuous current
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
непрерывный ток
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999]Тематики
- электротехника, основные понятия
EN
Англо-русский словарь нормативно-технической терминологии > continuous current
59 current-carrying capacity
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
предельно допустимый ток
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
прочность печатной платы к токовой нагрузке
Свойство печатной платы сохранять электрические и механические характеристики после воздействия максимально допустимой токовой нагрузки на печатный проводник или металлизированное отверстие печатной платы.
[ ГОСТ Р 53386-2009]Тематики
EN
Англо-русский словарь нормативно-технической терминологии > current-carrying capacity
60 PIC
1) Общая лексика: Роттердамская конвенция о применении процедуры предварительного обоснованного согласия в от (Rotterdam Convention on the Prior Consent Procedure for Certain Hazardous Chemical and Pesticides in International Trade)2) Компьютерная техника: Platform For Internet Content, Portable Imaging Computer, Programmable Instruction Chip, Programmable Intelligent Controller, programmable chip3) Авиация: КВС (Командир Воздушного Судна) (Pilot In Command), (pilot in command) командир экипажа4) Медицина: Pharmaceutical Inspection Convention, preinitiation complex5) Американизм: Pre Ike Credential, Public Interest Committee6) Военный термин: Pacific Imagery Processing and Interpretation Center, Parent Indicator Code, Persistence In Combat, Pioneers In Control, Processing and Interpretation Center, Public Information Committee, photointerpretation center, preinstallation calibration, preinstallation checkout, priority indicator code, procedures for instrument calibration, procurement information center, procurement information for contracts, program identification code, project information center, public information center, purpose identification code7) Техника: photographic interpretation center, pressure-indicating controller, pressurized ion chamber, program interrupt control, programmable integrated control equipment8) Шутливое выражение: Pissed Idiotic Child9) Юридический термин: Partner In Crime, Partners In Crime, Pre Inquiry Change10) Фармакология: Конвенция по фармацевтическим инспекциям (Pharmaceutical Inspection Convention)11) Биржевой термин: property index certificate12) Оптика: photonic integrated circuit13) Телекоммуникации: Personal Instant Communications, Physical Interface Card, Polyolefin Insulated Cable, Preferred Interexchange Carrier, Programmable Interrupt Controller14) Сокращение: Pacific Intelligence Center, Package Identification Code (barcode, USPS pub. 109), Pilot In Command, Plastic Insulated Conductor, Plastic/Polyethylene Insulated Cable, Position Independant Code, Programmable Integrated Circuit, Position Independent Code, Programmable Interruption Controller15) Университет: Pioneer Involvement Center16) Физика: Particle-In-Cell, Precision Ion Chamber17) Электроника: PC Paint image format18) Вычислительная техника: Primary Independent Carrier, personal intelligent communicator, programmable interface controller, расширение файлов в формате Lotus Pie, сжатие неподвижных изображений, Priority Interrupt Controller (IC), Point in Call (IN), Programmable Interrupt Controller (PIC), Plastic/Polyethelene Insulated Cable (Telephony)19) Нефть: Perforating Investigating Committee, person in charge, pressure indicator control, process interface unit20) Иммунология: Pre Initiation Complex21) Токсикология: poison information center22) Транспорт: Preferred Interstate Carrier23) Фирменный знак: Pig Improvement Company24) Экология: Pollution Identification And Correction25) СМИ: Picture In Case26) Деловая лексика: Paid In Capital, Purchase Integration And Completion27) Глоссарий компании Сахалин Энерджи: project inspection coordinator, контроллер индикатора давления (pressure indicator controller)28) Образование: Parent Involvement Committee, Polite In Class, Private Industry Council, Professional Instruction Center29) Сетевые технологии: Picture Image Compression, personal identification code, персональный идентификационный код30) Полимеры: polymer-impregnated concrete31) Программирование: Punch Invalid Character32) Сахалин Р: pressure indicator controller33) Химическое оружие: products of incomplete combustion34) Макаров: prior informed consent35) Расширение файла: Macintosh black & white PICT1 or color PICT2 file, PIXAR picture file, Personal Information Carrier, Pictor page format, Priority Interrupt Controller, Process Interface Control, Program Interrupt Controller, Picture file (and Graphic format, CShow, Alchemy, PC Paint, Pictor)36) Нефть и газ: person-in-charge, ответственное лицо37) Электротехника: polyethylene-insulated conductor38) Майкрософт: контроллер PIC39) Должность: Personal Information Connection, Pictorial Inventory Of Careers, Professional Interest Committee40) NYSE. Piccadilly Cafeterias, Inc.41) Аэропорты: Pine Cay, Turks & Caicos IslandsСтраницыСм. также в других словарях:
Mineral-insulated copper-clad cable — MIMS redirects here. For multi isotope imaging mass spectrometry, see Isotope mass spectrometry. PVC sheathed MICC cable. Conductor cross section area is 1.5 mm²; overall diameter is 7.2 mm … Wikipedia
Electrical conductor — Overhead conductors carry electric power from generating stations to customers. In physics and electrical engineering, a conductor is a material which contains movable electric charges. In metallic conductors such as copper or aluminum, the… … Wikipedia
List of Tesla patents — Below is a list of Tesla patents. Dr. Nikola Tesla was an inventor who obtained around 300 patents [Snezana Sarbo, [http://www.tesla symp06.org/papers/Tesla Symp06 Sarboh.pdfNikola Tesla s Patents] , Sixth International Symposium Nikola Tesla,… … Wikipedia
изолированный провод — — [Я.Н.Лугинский, М.С.Фези Жилинская, Ю.С.Кабиров. Англо русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.] EN core insulated conductor assembly comprising a conductor and its own insulation (and screens, if any) [IEC… … Справочник технического переводчика
Power cable — This article is about electric power conductors. For portable equipment, see power cord. A power cable is an assembly of two or more electrical conductors, usually held together with an overall sheath. The assembly is used for transmission of… … Wikipedia
coaxial cable — noun a transmission line for high frequency signals • Syn: ↑coax, ↑coax cable • Derivationally related forms: ↑coax (for: ↑coax) • Hypernyms: ↑cable, ↑ … Useful english dictionary
длительный допустимый ток — (длительный) допустимый ток Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме … Справочник технического переводчика
Tesla coil — at Questacon the National Science and Technology center in Canberra, Australia Uses Application in educational demonstrations, novelty lighting, as well as music Inventor … Wikipedia
Ampacity — is the maximum amount of electrical current a conductor or device can carry before sustaining immediate or progressive deterioration. Also described as current rating or current carrying capacity, ampacity is the RMS electric current which a… … Wikipedia
изолированная жила (термин употребляется в Северной Америке) — совокупность элементов, состоящая из жилы, ее изоляции (и экранов, если они есть) Примечание. В Северной Америке термин «core of a cable» определяется как совокупность компонентов кабеля, расположенных под общим защитным покровом,… … Справочник технического переводчика
Electrothermal-chemical technology — Electrothermal chemical (ETC) technology is an attempt to increase accuracy and muzzle energy of future tank, artillery, and close in weapon system [cite book | first=Dr Norman|last=Friedman| coauthors=David K Brown, Eric Grove, Stuart Slade,… … Wikipedia
Перевод: с английского на русский
с русского на английский- С русского на:
- Английский
- С английского на:
- Все языки
- Болгарский
- Испанский
- Итальянский
- Немецкий
- Румынский, Молдавский
- Русский
- Турецкий
- Украинский
- Финский