-
1 оболочка (в НКУ)
оболочка
Часть НКУ, обеспечивающая степень защиты оборудования от внешних воздействий, а также от прямого доступа со всех сторон не менее IP2X
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
оболочка
Корпус, обеспечивающий тип и степень защиты оборудования, соответствующие ее назначению.
[ ГОСТ Р МЭК 61439.1-2013]
оболочка
Часть ВРУ, обеспечивающая защиту от внешних воздействий и прямого доступа к токоведущим частям со всех сторон, а также выполняющая в ВРУ шкафного исполнения функцию несущей конструкции
[ ГОСТ Р 51732-2001]
пустая оболочка
Оболочка, предназначенная для размещения внутри нее электрооборудования, внутреннее пространство которой обеспечивает надежную защиту электрооборудования от внешних воздействий, а также указанную степень защиты от прикосновения или контакта с частями, находящимися под напряжением, и от контакта с подвижными частями.
Примечание - В настоящем стандарте вместо термина «пустая оболочка» использован сокращенный вариант термина «оболочка».
[ ГОСТ Р 52796- 2007( МЭК 62208: 2002)]EN
enclosure (of an assembly)
a part of an assembly providing a specified degree of protection of equipment against external influences and a specified degree of protection against approach to or contact with live parts and against contact with moving parts
[IEV number 441-13-01]FR
enveloppe (d'un ensemble)
partie d'un ensemble procurant un degré de protection spécifié du matériel contre les influences externes et un degré de protection spécifié contre l'approche des parties actives ou le contact avec elles ou contre le contact avec des pièces en mouvement
[IEV number 441-13-01]Оболочка шкафа
Оболочка распределительного щитка
Оболочка пульта с вертикальной надстройкой
Недопустимые, нерекомендуемые
- кожух
- металлокорпус
- обшивка
- пустой шкаф (щит, пульт)
- собственно шкаф (щит, пульт)
Тематики
- НКУ (шкафы, пульты,...)
Сопутствующие термины
- металлическая оболочка
- неразборная оболочка
- пластмассовая оболочка
- сборная оболочка
- сварная оболочка
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > оболочка (в НКУ)
-
2 оболочка аппарата
оболочка аппарата
Часть, обеспечивающая оговоренные степени защиты аппарата от некоторых внешних воздействий и от приближения или прикосновения к частям, находящимся под напряжением, и подвижным частям.
Примечание. Определение аналогично формулировке МЭК 60050(441-13-01), относящейся к узлам.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
enclosure (of an assembly)
a part of an assembly providing a specified degree of protection of equipment against external influences and a specified degree of protection against approach to or contact with live parts and against contact with moving parts
[IEV number 441-13-01]FR
enveloppe (d'un ensemble)
partie d'un ensemble procurant un degré de protection spécifié du matériel contre les influences externes et un degré de protection spécifié contre l'approche des parties actives ou le contact avec elles ou contre le contact avec des pièces en mouvement
[IEV number 441-13-01]EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > оболочка аппарата
-
3 оболочка (в НКУ)
оболочка
Часть НКУ, обеспечивающая степень защиты оборудования от внешних воздействий, а также от прямого доступа со всех сторон не менее IP2X
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
оболочка
Корпус, обеспечивающий тип и степень защиты оборудования, соответствующие ее назначению.
[ ГОСТ Р МЭК 61439.1-2013]
оболочка
Часть ВРУ, обеспечивающая защиту от внешних воздействий и прямого доступа к токоведущим частям со всех сторон, а также выполняющая в ВРУ шкафного исполнения функцию несущей конструкции
[ ГОСТ Р 51732-2001]
пустая оболочка
Оболочка, предназначенная для размещения внутри нее электрооборудования, внутреннее пространство которой обеспечивает надежную защиту электрооборудования от внешних воздействий, а также указанную степень защиты от прикосновения или контакта с частями, находящимися под напряжением, и от контакта с подвижными частями.
Примечание - В настоящем стандарте вместо термина «пустая оболочка» использован сокращенный вариант термина «оболочка».
[ ГОСТ Р 52796- 2007( МЭК 62208: 2002)]EN
enclosure (of an assembly)
a part of an assembly providing a specified degree of protection of equipment against external influences and a specified degree of protection against approach to or contact with live parts and against contact with moving parts
[IEV number 441-13-01]FR
enveloppe (d'un ensemble)
partie d'un ensemble procurant un degré de protection spécifié du matériel contre les influences externes et un degré de protection spécifié contre l'approche des parties actives ou le contact avec elles ou contre le contact avec des pièces en mouvement
[IEV number 441-13-01]Оболочка шкафа
Оболочка распределительного щитка
Оболочка пульта с вертикальной надстройкой
Недопустимые, нерекомендуемые
- кожух
- металлокорпус
- обшивка
- пустой шкаф (щит, пульт)
- собственно шкаф (щит, пульт)
Тематики
- НКУ (шкафы, пульты,...)
Сопутствующие термины
- металлическая оболочка
- неразборная оболочка
- пластмассовая оболочка
- сборная оболочка
- сварная оболочка
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > оболочка (в НКУ)
-
4 оболочка (в НКУ)
оболочка
Часть НКУ, обеспечивающая степень защиты оборудования от внешних воздействий, а также от прямого доступа со всех сторон не менее IP2X
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
оболочка
Корпус, обеспечивающий тип и степень защиты оборудования, соответствующие ее назначению.
[ ГОСТ Р МЭК 61439.1-2013]
оболочка
Часть ВРУ, обеспечивающая защиту от внешних воздействий и прямого доступа к токоведущим частям со всех сторон, а также выполняющая в ВРУ шкафного исполнения функцию несущей конструкции
[ ГОСТ Р 51732-2001]
пустая оболочка
Оболочка, предназначенная для размещения внутри нее электрооборудования, внутреннее пространство которой обеспечивает надежную защиту электрооборудования от внешних воздействий, а также указанную степень защиты от прикосновения или контакта с частями, находящимися под напряжением, и от контакта с подвижными частями.
Примечание - В настоящем стандарте вместо термина «пустая оболочка» использован сокращенный вариант термина «оболочка».
[ ГОСТ Р 52796- 2007( МЭК 62208: 2002)]EN
enclosure (of an assembly)
a part of an assembly providing a specified degree of protection of equipment against external influences and a specified degree of protection against approach to or contact with live parts and against contact with moving parts
[IEV number 441-13-01]FR
enveloppe (d'un ensemble)
partie d'un ensemble procurant un degré de protection spécifié du matériel contre les influences externes et un degré de protection spécifié contre l'approche des parties actives ou le contact avec elles ou contre le contact avec des pièces en mouvement
[IEV number 441-13-01]Оболочка шкафа
Оболочка распределительного щитка
Оболочка пульта с вертикальной надстройкой
Недопустимые, нерекомендуемые
- кожух
- металлокорпус
- обшивка
- пустой шкаф (щит, пульт)
- собственно шкаф (щит, пульт)
Тематики
- НКУ (шкафы, пульты,...)
Сопутствующие термины
- металлическая оболочка
- неразборная оболочка
- пластмассовая оболочка
- сборная оболочка
- сварная оболочка
EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > оболочка (в НКУ)
-
5 оболочка аппарата
оболочка аппарата
Часть, обеспечивающая оговоренные степени защиты аппарата от некоторых внешних воздействий и от приближения или прикосновения к частям, находящимся под напряжением, и подвижным частям.
Примечание. Определение аналогично формулировке МЭК 60050(441-13-01), относящейся к узлам.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
enclosure (of an assembly)
a part of an assembly providing a specified degree of protection of equipment against external influences and a specified degree of protection against approach to or contact with live parts and against contact with moving parts
[IEV number 441-13-01]FR
enveloppe (d'un ensemble)
partie d'un ensemble procurant un degré de protection spécifié du matériel contre les influences externes et un degré de protection spécifié contre l'approche des parties actives ou le contact avec elles ou contre le contact avec des pièces en mouvement
[IEV number 441-13-01]EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > оболочка аппарата
-
6 оболочка аппарата
оболочка аппарата
Часть, обеспечивающая оговоренные степени защиты аппарата от некоторых внешних воздействий и от приближения или прикосновения к частям, находящимся под напряжением, и подвижным частям.
Примечание. Определение аналогично формулировке МЭК 60050(441-13-01), относящейся к узлам.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
enclosure (of an assembly)
a part of an assembly providing a specified degree of protection of equipment against external influences and a specified degree of protection against approach to or contact with live parts and against contact with moving parts
[IEV number 441-13-01]FR
enveloppe (d'un ensemble)
partie d'un ensemble procurant un degré de protection spécifié du matériel contre les influences externes et un degré de protection spécifié contre l'approche des parties actives ou le contact avec elles ou contre le contact avec des pièces en mouvement
[IEV number 441-13-01]EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > оболочка аппарата
-
7 кожух (в НКУ)
кожух
крышка
Внешняя часть оболочки НКУ.
[ ГОСТ Р МЭК 61439.1-2013]EN
cover
external part of the enclosure of an assembly
[IEC 61439-1, ed. 2.0 (2011-08)]FR
panneau
partie extérieure de l'enveloppe d'un ensemble
[IEC 61439-1, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
Обобщающие термины
Синонимы
EN
FR
Русско-английский словарь нормативно-технической терминологии > кожух (в НКУ)
-
8 кожух (в НКУ)
кожух
крышка
Внешняя часть оболочки НКУ.
[ ГОСТ Р МЭК 61439.1-2013]EN
cover
external part of the enclosure of an assembly
[IEC 61439-1, ed. 2.0 (2011-08)]FR
panneau
partie extérieure de l'enveloppe d'un ensemble
[IEC 61439-1, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
Обобщающие термины
Синонимы
EN
FR
Русско-французский словарь нормативно-технической терминологии > кожух (в НКУ)
-
9 огибающая амплитудно-модулированного сигнала
огибающая амплитудно-модулированного сигнала
-
[IEV number 314-08-05]EN
envelope of an amplitude modulated signal
upper and lower boundary lines of the area which is swept by the carrier wave when plotted against time while the phase of the modulating signal is varied continuously through 360°
[IEV number 314-08-05]FR
enveloppe d'un signal modulé en amplitude
ensemble de deux courbes constituant les limites supérieures et inférieures de la zone balayée par l'onde porteuse, tracées en fonction du temps, lorsque la phase de l'onde modulante varie d'une façon continue sur 360°
[IEV number 314-08-05]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > огибающая амплитудно-модулированного сигнала
-
10 НКУ шкафное
НКУ шкафное
Защищенное НКУ, предназначенное в основном для установки на полу, которое может состоять из нескольких секций, подсекций или отсеков.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]EN
cubicle-type assembly
enclosed assembly of the floor-standing type which may comprise several sections, sub-sections or compartments
[IEC 61439-1, ed. 1.0 (2009-01)]FR
ensemble en armoire
ensemble sous enveloppe reposant sur le sol, pouvant comprendre plusieurs colonnes, éléments de colonnes ou compartiments
[IEC 61439-1, ed. 1.0 (2009-01)]Рис. Schneider Electric
НКУ шкафное (шкаф)
Недопустимые, нерекомендуемые
- моноблочный шкаф
- напольный шкаф
- напольный щит
- одиночный шкаф
- шкаф напольного исполнения
- щит
- щит шкафной
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
Синонимы
EN
FR
Русско-французский словарь нормативно-технической терминологии > НКУ шкафное
11 НКУ ящичное
НКУ ящичное
Защищенное НКУ, предназначенное в основном для установки на вертикальной плоскости.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]EN
box-type assembly
enclosed assembly, intended to be mounted on a vertical plane
[IEC 61439-1, ed. 2.0 (2011-08)]FR
ensemble en coffret
ensemble sous enveloppe, prévu pour être monté sur un plan vertical
[IEC 61439-1, ed. 2.0 (2011-08)]Ящик управления серии Я5000
Ящики данной серии предназначены
для управления
асинхронными электродвигателямиНедопустимые, нерекомендуемые
- шкаф
- шкаф навесного исполнения
- шкаф навесной
- шкаф настенный
- щит
- щит навесного исполнения
- щит навесной
- щит настенный
- щит шкафной малогабаритный
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
Синонимы
ПримечаниеТермин "щиток" только для распределительного щиткаEN
FR
Русско-французский словарь нормативно-технической терминологии > НКУ ящичное
12 НКУ, устанавливаемое в нишу в стене
НКУ, устанавливаемое в нишу в стене
НКУ, предназначенное для установки в нишу в стене, при этом оболочка НКУ не опирается на верхнюю часть стены
[ ГОСТ Р МЭК 61439.1-2013]EN
wall-mounted recessed type assembly
assembly for installation into a wall recess, where the enclosure does not support the portion of wall above
[IEC 61439-1, ed. 2.0 (2011-08)]FR
ensemble à encastrer dans un mur
ensemble destiné à être installé dans un renfoncement de mur, l’enveloppe ne supportant pas la partie de mur située au-dessus
[IEC 61439-1, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
Обобщающие термины
EN
FR
Русско-французский словарь нормативно-технической терминологии > НКУ, устанавливаемое в нишу в стене
13 НКУ защищенное
НКУ защищенное
НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
защищенное НКУ
НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
[ ГОСТ Р МЭК 61439.1-2013]EN
enclosed assembly (of switchgear and controlgear)
an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
[IEV number 441-12-02]FR
ensemble (d'appareillage de connexion et de commande)
sous enveloppe
ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
[IEV number 441-12-0
Шкаф - защищенное НКУ, предназначенное для установки на полу
Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.
Safety enclosed switchgear may be classified with respect to purpose of application as follows:
1. General medium- or high-voltage switchgear
2. Primary unit substations
3. Rectifier unit substations
4. Secondary unit substations or power centers
5. General low-voltage switchgear
6. Low-voltage distribution switchboards
7. Motor-control-center switchboards
[American electricians’ handbook]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
Синонимы
EN
- enclosed assembly (of switchgear and controlgear)
- enclosed switchboard
- safety enclosed board
- safety enclosed switchgear
DE
FR
Русско-французский словарь нормативно-технической терминологии > НКУ защищенное
14 комплектное распределительное устройство в металлической оболочке
- pareillage d’armoire
- appareillage sous enveloppe métallique
- appareillage recouvert de métal
- appareillage à compartiments (avec cloisons non métalliques)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Русско-французский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке
15 комплектное распределительное устройство в металлической оболочке
- metalclad switchgear
- metalclad switch gear
- metal-enclosed switchgear
- metal clad switchgear
- metal clad switch gear
- MESG
- MCSG
- cubicle switchgear
- compartmented switchgear (with non-metallic partitions)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Русско-английский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке
16 НКУ защищенное
НКУ защищенное
НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
защищенное НКУ
НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
[ ГОСТ Р МЭК 61439.1-2013]EN
enclosed assembly (of switchgear and controlgear)
an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
[IEV number 441-12-02]FR
ensemble (d'appareillage de connexion et de commande)
sous enveloppe
ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
[IEV number 441-12-0
Шкаф - защищенное НКУ, предназначенное для установки на полу
Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.
Safety enclosed switchgear may be classified with respect to purpose of application as follows:
1. General medium- or high-voltage switchgear
2. Primary unit substations
3. Rectifier unit substations
4. Secondary unit substations or power centers
5. General low-voltage switchgear
6. Low-voltage distribution switchboards
7. Motor-control-center switchboards
[American electricians’ handbook]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
Синонимы
EN
- enclosed assembly (of switchgear and controlgear)
- enclosed switchboard
- safety enclosed board
- safety enclosed switchgear
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > НКУ защищенное
17 НКУ защищенное
- safety enclosed switchgear
- safety enclosed board
- enclosed switchboard
- enclosed assembly (of switchgear and controlgear)
НКУ защищенное
НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
защищенное НКУ
НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
[ ГОСТ Р МЭК 61439.1-2013]EN
enclosed assembly (of switchgear and controlgear)
an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
[IEV number 441-12-02]FR
ensemble (d'appareillage de connexion et de commande)
sous enveloppe
ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
[IEV number 441-12-0
Шкаф - защищенное НКУ, предназначенное для установки на полу
Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.
Safety enclosed switchgear may be classified with respect to purpose of application as follows:
1. General medium- or high-voltage switchgear
2. Primary unit substations
3. Rectifier unit substations
4. Secondary unit substations or power centers
5. General low-voltage switchgear
6. Low-voltage distribution switchboards
7. Motor-control-center switchboards
[American electricians’ handbook]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
Синонимы
EN
- enclosed assembly (of switchgear and controlgear)
- enclosed switchboard
- safety enclosed board
- safety enclosed switchgear
DE
FR
Русско-английский словарь нормативно-технической терминологии > НКУ защищенное
18 комплектное устройство в пластмассовой оболочке
-
EN
insulation-enclosed switchgear and controlgear
switchgear and controlgear assemblies with an external insulation enclosure and completely assembled, except for external connections
NOTE - The external insulation may be supplied with a (semi-) conducting layer.
[IEC 62271-303, ed. 1.0 (2008-07)]FR
appareillage sous enveloppe isolante
ensemble d'appareillage, avec une enveloppe isolante externe, complètement assemblé à l'exception des connexions extérieures
NOTE - L’enveloppe isolante externe peut être fournie avec une couche (semi-)conductrice.
[IEC 62271-303, ed. 1.0 (2008-07)]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>EN
FR
Русско-французский словарь нормативно-технической терминологии > комплектное устройство в пластмассовой оболочке
19 комплектное устройство в пластмассовой оболочке
-
EN
insulation-enclosed switchgear and controlgear
switchgear and controlgear assemblies with an external insulation enclosure and completely assembled, except for external connections
NOTE - The external insulation may be supplied with a (semi-) conducting layer.
[IEC 62271-303, ed. 1.0 (2008-07)]FR
appareillage sous enveloppe isolante
ensemble d'appareillage, avec une enveloppe isolante externe, complètement assemblé à l'exception des connexions extérieures
NOTE - L’enveloppe isolante externe peut être fournie avec une couche (semi-)conductrice.
[IEC 62271-303, ed. 1.0 (2008-07)]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>EN
FR
Русско-английский словарь нормативно-технической терминологии > комплектное устройство в пластмассовой оболочке
20 заслонка
заслонка
Элемент, который может перемещаться из положения, позволяющего осуществлять соединение контактов съемных или выдвижных частей с неподвижными контактами, в положение, при котором он становится частью элемента оболочки или перегородки, ограждающей неподвижные контакты.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
заслонка
Часть НКУ, которая может перемещаться из положения при котором она позволяет контактам выдвижной отделяемой части или выдвижной неотделяемой части сомкнуться с неподвижными контактами, в положение, при котором она становится частью оболочки или перегородки, ограждающей неподвижные контакты.
[ ГОСТ Р МЭК 61439-1-2013]EN
shutter (of an assembly)
a part of an assembly that can be moved from a position where it permits contacts of a removable part to engage fixed contacts, to a position where it becomes a part of the enclosure or partition shielding the fixed contacts
[IEV number 441-13-07]FR
volet (d'un ensemble)
partie d'un ensemble qui peut être déplacée d'une position dans laquelle elle permet l'embrochage des contacts d'une partie amovible sur des contacts fixes à une position dans laquelle elle constitue une partie de l'enveloppe ou d'une cloison protégeant les contacts fixes
[IEV number 441-13-07]
Рис. Schneider ElectricТематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > заслонка
СтраницыСм. также в других словарях:
Enveloppe (Géométrie) — Pour les articles homonymes, voir Enveloppe. En géométrie différentielle une famille de courbes planes possède fréquemment une courbe enveloppe. Celle ci admet deux définitions géométriques traditionnnelles, presque équivalentes : l… … Wikipédia en Français
Enveloppe (géométrie) — Pour les articles homonymes, voir Enveloppe. Enveloppe (en rouge) d une famille de paraboles passant par l origine et dont les sommets appartiennent à une même ellipse (en bleu) En géométrie … Wikipédia en Français
Enveloppe Convexe — Analogie avec un élastique entourant des points dans le plan, l enveloppe convexe est la région délimitée par la ligne bleue. L enveloppe convexe d un objet ou d un regroupement d objets géométriques est l ensemble convexe le plus petit parmi… … Wikipédia en Français
enveloppe — [ ɑ̃v(ə)lɔp ] n. f. • 1292; de envelopper I ♦ 1 ♦ Chose souple qui sert à envelopper (⇒ étui, fourreau, gaine, revêtement). Enveloppe protectrice, isolante. Enveloppe en papier, en toile, d un colis, d un paquet. ⇒ emballage, 1. sac. Enveloppe… … Encyclopédie Universelle
Enveloppe Sonore — Pour les articles homonymes, voir Enveloppe. L’enveloppe sonore est l une des propriétés d un son instrumental renvoyant plus précisément à l évolution de son amplitude (son volume) au cours du temps. Elle peut être représentée par une courbe en… … Wikipédia en Français
Enveloppe temporelle — Enveloppe sonore Pour les articles homonymes, voir Enveloppe. L’enveloppe sonore est l une des propriétés d un son instrumental renvoyant plus précisément à l évolution de son amplitude (son volume) au cours du temps. Elle peut être représentée… … Wikipédia en Français
Ensemble convexe — Pour les autres sens du mot « convexe », voir convexité. Un objet géométrique est dit convexe lorsque, chaque fois qu on y prend deux points A et B, le segment [A,B] qui les joint y est entièrement contenu. Ainsi un cube plein, un… … Wikipédia en Français
Enveloppe convexe — Analogie avec un élastique entourant des points dans le plan, l enveloppe convexe est la région délimitée par la ligne bleue. L enveloppe convexe d un objet ou d un regroupement d objets géométriques est l ensemble convexe le plus petit parmi… … Wikipédia en Français
Enveloppe — Cette page d’homonymie répertorie les différents sujets et articles partageant un même nom. Sur les autres projets Wikimedia : « enveloppe », sur le Wiktionnaire (dictionnaire universel) En acoustique musicale, l enveloppe sonore… … Wikipédia en Français
Courbe enveloppe — Enveloppe (géométrie) Pour les articles homonymes, voir Enveloppe. En géométrie différentielle une famille de courbes planes possède fréquemment une courbe enveloppe. Celle ci admet deux définitions géométriques traditionnnelles, presque… … Wikipédia en Français
Enveloppe supérieure — En mathématiques, l enveloppe supérieure d une famille de fonctions à valeurs réelles est la fonction dont la valeur en un point est le supremum (ou borne supérieure) des valeurs prises par ces fonctions en ce point. Sommaire 1 Définition 2… … Wikipédia en Français
Перевод: с русского на все языки
со всех языков на русский- Со всех языков на:
- Русский
- С русского на:
- Все языки
- Английский
- Немецкий
- Французский