-
1 максимальный расцепитель тока с независимой выдержкой времени
Максимальное реле или максимальный расцепитель тока с независимой выдержкой времени
Максимальное реле или максимальный расцепитель тока, срабатывающие с определенной выдержкой времени, которая может регулироваться, но не зависит от величины сверхтока.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
definite time-delay over-current release
an over-current release which operates with a definite time-delay, which may be adjustable, but is independent of the value of the over-current
[IEV number 441-16-34]FR
déclencheur à maximum de courant à retard indépendant
déclencheur à maximum de courant qui fonctionne avec un retard défini qui peut être réglable mais est indépendant de la valeur de la surintensité.
[IEV number 441-16-34]Параллельные тексты EN-RU Protection against overload may be provided on both the high-voltage side and the low-voltage side, depending on the transformer power. For low-power transformers the protection should be positioned on the low-voltage side, while for high-power transformers the protection should be provided on the high-voltage side. Protection against overloads on the HV side is provided using HV circuit breakers associated with maximum-current protections in constant time or independent time.
[Legrand]В зависимости от мощности трансформатора, защита от перегрузки выполняется на стороне высшего или низшего напряжения. Мощные трансформаторы защищают со стороны электросети, а маломощные – со стороны нагрузки. Защита от перегрузки на стороне высшего напряжения осуществляется высоковольтным автоматическим выключателем с максимальными расцепителями тока с независимой выдержкой времени.
[Перевод Интент]
Недопустимые, нерекомендуемые
Тематики
- выключатель автоматический
- расцепитель, тепловое реле
- реле электрическое
Классификация
>>>EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > максимальный расцепитель тока с независимой выдержкой времени
-
2 аппарат с выдержкой времени
аппарат с выдержкой времени
Коммутационный электрический аппарат, имеющий устройство, обеспечивающее специально предусмотренную выдержку времени от момента подачи команды на выполнение коммутационной операции до начала ее выполнения.
[ ГОСТ 17703-72]EN
time-delay switch
TDS
switch provided with a time-delay device which operates for a certain time (the delay time). It may be either manually actuated and/or remotely electrically initiated
[IEC 60669-2-3, ed. 3.0 (2006-08)]
time-delay switch
TDS
a switch provided with a time-delay device, which operates for a certain time (the delay time) and which is operated by hand and/or by remote control by means of pulses
[IEV number 442-04-33]
mechanical time-delay device
device which, through a mechanical auxiliary, operates some time after the instant at which the conditions which cause it to operate are established
NOTE - This definition is only applicable to the switching circuit.
[IEC 60669-2-3, ed. 3.0 (2006-08)]FR
interrupteurs temporisés (minuteries)
interrupteur pourvu d’un dispositif de temporisation qui le fait fonctionner pendant un certain temps (la temporisation). Il peut être commandé manuellement et/ou lancé électriquement à distance
[IEC 60669-2-3, ed. 3.0 (2006-08)]
interrupteur temporisé
interrupteur pourvu d'un dispositif de temporisation qui le fait fonctionner pendant un certain temps (la temporisation) et qui est commandé manuellement et/ou à distance au moyen d'impulsions
[IEV number 442-04-33]
dispositif mécanique à action différée
dispositif qui, par l'effet d'un auxiliaire mécanique, fonctionne un certain temps après l'instant où les conditions prévues pour son fonctionnement sont réalisées
NOTE - Cette définition s’applique seulement au circuit de l’interrupteur.
[IEC 60669-2-3, ed. 3.0 (2006-08)]Тематики
- аппарат, изделие, устройство...
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > аппарат с выдержкой времени
-
3 вывод
вывод
Проводящая часть аппарата, предназначенная для электрического соединения с внешними цепями.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]
вывод
Часть выключателя с контактами, служащими для присоединения к выключателю проводников внешней цепи
[ ГОСТ Р 52565-2006]
вывод электротехнического изделия (устройства)
Ндп. клемма
Часть электротехнического изделия (устройства), предназначенная для электрического соединения его с другими изделиями (устройствами).
[ ГОСТ 18311-80]
вывод (трансформатора)
Токоведущая часть, предназначенная для присоединения обмотки к внешним проводникам
[ ГОСТ 30830-2002]
вывод
Точка электрической цепи, предназначенная для выполнения соединений с другой электрической цепью.
[ ГОСТ Р 52002-2003]
вывод
-
[IEV number 151-12-12]EN
terminal
component provided for the connection of a device to external conductors.
[IEC 62271-100, ed. 2.0 (2008-04)]
terminal
the conductive part of one pole, composed of one or more clamping unit(s) and insulation if necessary
[IEC 60669-1, ed. 3.0 (1998-02)]
terminal
conductive part of a device, electric circuit or electric network, provided for connecting that device, electric circuit or electric network to one or more external conductors
NOTE – The term "terminal" is also used for a connection point in circuit theory.
Source: see IEC 60050-131
[IEV number 151-12-12]FR
borne
composant destiné à raccorder un disjoncteur à des conducteurs extérieurs.
[IEC 62271-100, ed. 2.0 (2008-04)]
borne
partie unipolaire conductrice composée d'un ou plusieurs organes de serrage, isolée si nécessaire
[IEC 60669-1, ed. 3.0 (1998-02)]
borne, f
partie conductrice d'un dispositif, d'un circuit électrique ou d'un réseau électrique, destinée à le connecter à un ou plusieurs conducteurs extérieurs
NOTE – Le terme "borne" désigne aussi un point de connexion en théorie des circuits.
Source: voir la CEI 60050-131
[IEV number 151-12-12]Недопустимые, нерекомендуемые
Тематики
- вывод, зажим электрический
Классификация
>>>Синонимы
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > вывод
-
4 изготовитель НКУ
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
Русско-французский словарь нормативно-технической терминологии > изготовитель НКУ
-
5 комплектное распределительное устройство в металлической оболочке
- pareillage d’armoire
- appareillage sous enveloppe métallique
- appareillage recouvert de métal
- appareillage à compartiments (avec cloisons non métalliques)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Русско-французский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке
-
6 освещение
освещение
Совокупность архитектурно-строительных и светотехнических приёмов использования видимой части лучистой энергии в утилитарных и художественных целях
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]Параллельные тексты EN-RU
1.1.4. Lighting
The manufacturer must supply integral lighting suitable for the operations concerned where its lack is likely to cause a risk despite ambient lighting of normal intensity.
The manufacturer must ensure that there is no area of shadow likely to cause nuisance, that there is no irritating dazzle and that there are no dangerous stroboscopic effects due to the lighting provided by the manufacturer.
Internal parts requiring frequent inspection, and adjustment and maintenance areas, must be provided with appropriate lighting.
[DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL]1.1.4. Освещение
Изготовитель должен обеспечить суммарное освещение, необходимое для соответствующих операций, если его недостаток может вызвать риск, несмотря на нормальную интенсивность обычного освещения.
Изготовитель должен убедиться в отсутствии затененных областей, наличие которых может вызвать дискомфорт, в отсутствии ослепительного блеска, опасных стробоскопических эффектов, вызываемых осветительным оборудованием, поставляемом изготовителем.
Внутренние детали, требующие частой проверки и наладки, а также места, в которых проводится техобслуживание, должны иметь адекватное освещение.
[Официальный перевод]
1.1.4. Освещение
Если, несмотря на нормальную интенсивность общего освещения, возможен риск ненадлежащего выполнения операций, изготовитель должен обеспечить дополнительное местное освещение.
Изготовитель должен убедиться в отсутствии затененных областей, наличие которых может вызвать дискомфорт, в отсутствии ослепительного блеска, опасных стробоскопических эффектов, вызываемых осветительным оборудованием, поставляемом изготовителем.Внутренние части машинного оборудования, требующие частого осмотра, регулировки и технического обслуживания, должны иметь соответствующее освещение.
[Перевод Интент]
Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > освещение
-
7 основание плавкого предохранителя
основание плавкого предохранителя
Несъемная часть плавкого предохранителя, снабженная контактами, выводами и, при необходимости, оболочками.
[ ГОСТ Р 50339. 0-2003 ( МЭК 60269-1-98)]
основание предохранителя
основание
Несъемная часть плавкого предохранителя, снабженная контактами и выводами.
[ ГОСТ 17242-86]EN
fuse-base
fuse-mount
the fixed part of a fuse provided with contacts and terminals
[IEV number 441-18-02]
fuse-base
fuse-mount
fixed part of a fuse provided with contacts and terminals
NOTE The fuse-base comprises all the parts necessary for insulation
[IEC 60282-1, ed. 7.0 (2009-10)]FR
socle
partie fixe d'un fusible munie de contacts et de bornes
[IEV number 441-18-02]
socle
partie fixe d'un fusible munie de contacts et de bornes
NOTE Le socle comprend tous les éléments assurant l'isolement
[IEC 60282-1, ed. 7.0 (2009-10)]Тематики
Обобщающие термины
Синонимы
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > основание плавкого предохранителя
-
8 степень защиты (обеспечиваемая оболочкой)
степень защиты
Способ защиты, обеспечиваемый оболочкой от доступа к опасным частям, попадания внешних твердых предметов и (или) воды и проверяемый стандартными методами испытаний.
[ ГОСТ 14254-96( МЭК 529-89)]
степень защиты, обеспечиваемая оболочкой (IP)
Числовые обозначения после кода IP, которые в соответствии с МЭК 60529 [12] характеризуют оболочку электрооборудования, обеспечивающую:
- защиту персонала от прикасания или доступа к находящимся под напряжением или движущимся частям (за исключением гладких вращающихся валов и т.п.), расположенным внутри оболочки;
- защиту электрооборудования от проникания в него твердых посторонних тел и,
- если указано в обозначении, защиту электрооборудования от вредного проникания воды.
[ ГОСТ Р МЭК 60050-426-2006]EN
degree of protection of enclosure
IP (abbreviation)
numerical classification according to IEC 60529 preceded by the symbol IP applied to the enclosure of electrical apparatus to provide:
– protection of persons against contact with, or approach to, live parts and against contact with moving parts (other than smooth rotating shafts and the like) inside the enclosure,
– protection of the electrical apparatus against ingress of solid foreign objects, and
– where indicated by the classification, protection of the electrical apparatus against harmful ingress of water
[IEV number 426-04-02 ]FR
degré de protection procuré par une enveloppe
IP (abréviation)
classification numérique selon la CEI 60529, précédée du symbole IP, appliquée à une enveloppe de matériel électrique pour apporter:
– une protection des personnes contre tout contact ou proximité avec des parties actives et contre tout contact avec une pièce mobile (autre que les roulements en faible rotation) à l'intérieur d'une enveloppe
– une protection du matériel électrique contre la pénétration de corps solide étrangers, et
– selon l’indication donnée par la classification, une protection du matériel électrique contre la pénétration dangereuse de l’eau
[IEV number 426-04-02 ]Элементы кода IP и их обозначения по ГОСТ 14254-96( МЭК 529-89)
Цифры кода IP
Значение для защиты оборудования от проникновения внешних твердых предметов
Значение для защиты людей от доступа к опасным частям
Первая характеристическая цифра
0
Нет защиты
Нет защиты
1
диаметром ≥ 50 мм
тыльной стороной руки
2
диаметром ≥ 12,5 мм
пальцем
3
диаметром ≥ 2,5 мм
инструментом
4
диаметром ≥ 1,0 мм
проволокой
5
пылезащищенное
проволокой
6
пыленепроницаемое
проволокой
От вредного воздействия в результате проникновения воды
Вторая характеристическая цифра
0
Нет защиты
-
1
Вертикальное каплепадение
2
Каплепадение (номинальный угол 15°)
3
Дождевание
4
Сплошное обрызгивание
5
Действие струи
6
Сильное действие струи
7
Временное непродолжительное погружение
8
Длительное погружение
Дополнительная буква (при необходимости)
-
От доступа к опасным частям
A
тыльной стороной руки
B
пальцем
C
инструментом
проволокой
Вспомогательная буква (при необходимости)
Вспомогательная информация относящаяся к:
-
H
высоковольтным аппаратам
M
состоянию движения во время испытаний защиты от воды
S
состоянию неподвижности во время испытаний защиты от воды
W
Требования в части стойкости оболочек и электрооборудования в целом к климатическим, механическим внешним воздействующим факторам (ВВФ) и специальным средам (кроме проникновения внешних твердых предметов и воды) установлены вне рамок настоящего стандарта.
Параллельные тексты EN-RU
The code IP indicates the degrees of protection provided by an enclosure against access to hazardous parts, ingress of solid foreign objects and ingress of water.
The degree of protection of an enclosure is identified, in compliance with the specifications of the Standard IEC 60529, by the code letters IP (International Protection) followed by two numerals and two additional letters.
The first characteristic numeral indicates the degree of protection against ingress of solid foreign objects and against contact of persons with hazardous live parts inside the enclosure.
The second characteristic numeral indicates the degree of protection against ingress of water with harmful effects.
[ABB]Код IP обозначает степень защиты, обеспечиваемую оболочкой от попадания внутрь твердых посторонних предметов и воды.
Степень защиты оболочки обозначается в соответствии со стандартом МЭК 60529 буквенным обозначением IP (International Protection, т. е. Международная защита) после которого следуют две цифры, к которым в некоторых случаях добавляются еще две буквы.
Первая характеристическая цифра обозначает степень защиты от проникновения твердых посторонних предметов и от контакта людей с находящимися внутри оболочки опасными токоведущими частями.
Вторая характеристическая цифра обозначает степень защиты оболочки с точки зрения вредного воздействия, оказываемого проникновением воды.
[Перевод Интент]The protection of enclosures against ingress of dirt or against the ingress of water is defined in IEC529 (BSEN60529:1991). Conversely, an enclosure which protects equipment against ingress of particles will also protect a person from potential hazards within that enclosure, and this degree of protection is also defined as a standard.
The degrees of protection are most commonly expressed as ‘IP’ followed by two numbers, e.g. IP65, where the numbers define the degree of protection. The first digit shows the extent to which the equipment is protected against particles, or to which persons are protected from enclosed hazards. The second digit indicates the extent of protection against water.
The wording in the table is not exactly as used in the standards document, but the dimensions are accurateIP Degree of Protection according to EN/IEC 60529
Correlations between IP (IEC) and NEMA 250 standards
IP10 -> NEMA 1
IP11 -> NEMA 2
IP54 -> NEMA 3 R
IP52 -> NEMA 5-12-12 K
IP54 -> NEMA 3-3 S
IP56 -> NEMA 4-4 X
IP67 -> NEMA 6-6 P[ http://electrical-engineering-portal.com/ip-protection-degree-iec-60529-explained]
Тематики
- безопасность машин и труда в целом
- электробезопасность
- электротехника, основные понятия
Действия
- степень защиты
- степень защиты, обеспечиваемая оболочкой
- степень защиты, обеспечиваемая оболочкой (код IP)
EN
- amount of protection
- degree of protection IP
- degree of protection of an enclosure
- degree of protection of enclosure
- degree of protection provided by enclosure
- enclosure rating
- ingress protection rating
- IP
- IP degree of protection,
- IP rating
- IP Sealing Specification
- IP security
- IPSec
- level of protection
- mechanical rating
- protection
- protection index
- protection rating
DE
- IP-Schutzgrad, m
- Schutzart des Gehäuses, f
FR
Русско-французский словарь нормативно-технической терминологии > степень защиты (обеспечиваемая оболочкой)
-
9 аварийный сигнал
аварийный сигнал
alarm
Сигнал оповещения, генерируемый в случае, если произошел отказ или контролируемый параметр вышел за допустимые пределы.
[Л.М. Невдяев. Телекоммуникационные технологии. Англо-русский толковый словарь-справочник. Под редакцией Ю.М. Горностаева. Москва, 2002]
аварийный сигнал
beacon
BCN
Сигнал, посылаемый от неисправного узла сети.
[Л.М. Невдяев. Телекоммуникационные технологии. Англо-русский толковый словарь-справочник. Под редакцией Ю.М. Горностаева. Москва, 2002]
аварийный сигнал
fate signal
Сообщение, сигнализирующее об отказе или пропадании входной информации.
[Л.М. Невдяев. Телекоммуникационные технологии. Англо-русский толковый словарь-справочник. Под редакцией Ю.М. Горностаева. Москва, 2002]
аварийный сигнал
safety signal
Сигнал, поступающий отдатчиков охранной сигнализации.
[Л.М. Невдяев. Телекоммуникационные технологии. Англо-русский толковый словарь-справочник. Под редакцией Ю.М. Горностаева. Москва, 2002]EN
alarm
activation of an event that shows a critical state
[IEC 61158-5-10, ed. 2.0 (2010-08)]
alarm
type of Event associated with a state condition that typically requires acknowledgement
[ IEC 62541-1, ed. 1.0 (2010-02)]
alarm
an audible, visual, or other signal activated when the instrument reading exceeds a preset value or falls outside of a preset range
[IEC 62533, ed. 1.0 (2010-06)]
alarm
warning of the presence of a hazard to life, property or the environment
[IEC 62642-1, ed. 1.0 (2010-06)]
alarm
audio and visual signal announcing a condition requiring attention. The audio continues until acknowledged. The acoustic noise pressure of the alarm is at least 75 dBA but not greater than 85 dBA at a distance of 1 m (IEC 60945). The visual indication continues until the alarm condition is removed
[IEC 62065, ed. 1.0 (2002-03)]
alarm
item of diagnostic, prognostic, or guidance information, which is used to alert the operator and to draw his or her attention to a process or system deviation
NOTE Specific information provided by alarms includes the existence of an anomaly for which corrective action might be needed, the cause and potential consequences of the anomaly, the overall plant status, corrective action to the anomaly, and feedback of corrective actions.
Two types of deviation may be recognised:
– unplanned – undesirable process deviations and equipment faults;
– planned – deviations in process conditions or equipment status that are the expected response to but could be indicative of undesirable plant conditions.
[IEC 62241, ed. 1.0 (2004-11)]FR
alarme
signal sonore, visuel ou autre, activé lorsque la lecture de l’instrument excède une valeur préréglée ou sortant d’un domaine déterminé
[IEC 62533, ed. 1.0 (2010-06)]
alarme
avertissement de la présence d'un risque concernant la vie, la propriété ou l'environnement
[IEC 62642-1, ed. 1.0 (2010-06)]
alarme
élément informatif relatif au diagnostic, au pronostique ou à une recommandation, qui est utilisé pour alerter l’opérateur et pour attirer son attention sur une déviation du procédé ou d’un système
NOTE L’information particulière fournie par les alarmes couvre l’existence d’anomalies pour lesquelles une action corrective pourrait être nécessaire, la cause et les conséquences potentielles de l’anomalie, l’état général de la centrale, l’action corrective correspondant à l’anomalie et le retour de l’action corrective.
Deux types de déviation peuvent être distingués:
– non prévue – Déviations du procédé indésirable et défaillance de matériels;
– prévue – Déviations relatives aux conditions du procédé ou aux états des matériels qui sont les réponses prévues, mais qui peuvent être indicatives de conditions indésirables pour la centrale.
[IEC 62241, ed. 1.0 (2004-11)]Параллельные тексты EN-RU
When the accumulated energy dropout setpoint and time delay are satisfied, the alarm is inactive.
[Schneider Electric]Если подсчитанное количество электроэнергии становится меньше заданного максимального значения и заданное время задержки истекло, аварийный сигнал отключается.
[Перевод Интент]
Тематики
- автоматизация, основные понятия
- релейная защита
- электросвязь, основные понятия
Действия
EN
- alarm
- alarm signal
- alert message
- BCN
- beacon
- emergency signal
- fate signal
- fault signal
- safety signal
- signal alarm
- trouble tone
FR
Русско-французский словарь нормативно-технической терминологии > аварийный сигнал
-
10 ввод с бумажной изоляцией, пропитанной смолой
ввод с бумажной изоляцией, пропитанной смолой
Ввод, в котором основная изоляция состоит из бумаги, пропитанной смолой.
[ ГОСТ 27744-88]EN
resin-impregnated paper bushing
RIP
bushing in which the major insulation consists of a core wound from untreated paper and subsequently impregnated with a curable resin
NOTE A resin-impregnated paper bushing can be provided with an insulating envelope, in which case the intervening space can be filled with an insulating liquid or another insulating medium.
[IEC 60137, ed. 6.0 (2008-07)]FR
traversée en papier imprégné de résine
RIP (resin-impregnated paper)
traversée dont l'isolation principale est assurée par un corps enroulé en papier non traité et ensuite imprégné de résine durcissable
NOTE Une traversée en papier imprégné de résine peut comporter une enveloppe isolante. Dans ce cas, l'espace intermédiaire peut être rempli d'un isolant liquide ou d'un autre milieu isolant
[IEC 60137, ed. 6.0 (2008-07)]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > ввод с бумажной изоляцией, пропитанной смолой
-
11 ввод с бумажной изоляцией, склеенной смолой
ввод с бумажной изоляцией, склеенной смолой
Ввод, в котором основная изоляция состоит из бумаги, склеенной смолой.
[ ГОСТ 27744-88]EN
resin-bonded paper bushing
RBP
bushing in which the major insulation consists of a core wound from resin-coated paper
NOTE 1 During the winding process, each paper layer is bonded to the previous layer by its resin coating and the bonding achieved by curing the resin.
NOTE 2 A resin-bonded paper bushing can be provided with an insulating envelope, in which case the intervening space can be filled with an insulating liquid or another insulating medium.
[IEC 60137, ed. 6.0 (2008-07)]FR
traversée en papier enduit de résine
RBP (resin-bonded paper)
traversée dont l'isolation principale est assurée par un corps enroulé en papier enduit de résine
NOTE 1 Lors de l'enroulement, chaque couche de papier est liée à la précédente par l'enduit de résine et la cohésion obtenue par le durcissement de la résine.
NOTE 2 Une traversée en papier enduit de résine peut comporter une enveloppe isolante. Dans ce cas, l'espace intermédiaire peut être rempli d'un isolant liquide ou d'un autre milieu isolant.
[IEC 60137, ed. 6.0 (2008-07)]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > ввод с бумажной изоляцией, склеенной смолой
-
12 взаимозаменяемость плавких вставок
взаимозаменяемость плавких вставок
-
[Интент]EN
interchangeability of fuse-links
compatibility of dimensions and pre-arcing time-current characteristics between different manufacturer's expulsion fuse-links, permitting use of such fuse-links in fuse-carriers of alternative manufacturers, without significant alteration of the pre-arcing time-current characteristics
NOTE It should be noted that the protective and interrupting performance provided by the combination of the selected fuse-link and the selected fuse-carrier can only be assured by performance test on the specific combination
[IEC 60282-2, ed. 3.0 (2008-04)]FR
interchangeabilité des éléments de remplacement
compatibilité des dimensions et des caractéristiques temps/courant de préarc entre éléments de remplacement de constructeurs différents, permettant l'utilisation de tels éléments de remplacement dans des porte-élément de remplacements d'autres constructeurs, sans modification sensible des caractéristiques temps/courant de préarc
NOTE Il convient de noter que la caractéristique de protection et d’interruption offerte par la combinaison de l'élément de remplacement choisi et du porte-élément de remplacement choisi ne peut être assurée que par l'essai de fonctionnement de la combinaison particulière.
[IEC 60282-2, ed. 3.0 (2008-04)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > взаимозаменяемость плавких вставок
-
13 водяная мельница
водяная мельница
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
water mill
A mill whose power is provided by a large wheel which is turned by moving water, especially a river. (Source: CAMB)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > водяная мельница
-
14 временное жилье на случай чрезвычайной ситуации
временное жилье на случай чрезвычайной ситуации
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
emergency lodging
Housing or dwelling space provided for victims of a sudden, urgent and usually unexpected occurrence, especially when harm has been done to human life, property or the environment. (Source: RHW)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > временное жилье на случай чрезвычайной ситуации
-
15 вывод химического источника тока
- borne, f
вывод химического источника тока
вывод
Часть химического источника тока, предназначенная для присоединения его к внешней электрической цепи.
[ ГОСТ 15596-82]EN
terminal
conductive part of a device, electric circuit or electric network, provided for connecting that device, electric circuit or electric network to one or more external conductors
Source: 151-12-12
[IEV number 482-02-22]FR
borne, f
partie conductrice d'un dispositif, d'un circuit électrique ou d'un réseau électrique, destinée à le connecter à un ou plusieurs conducteurs extérieurs
Source: 151-12-12
[IEV number 482-02-22]Тематики
Классификация
>>>Синонимы
EN
DE
- Anschlusspunkt, m
- Anschluß
- Anschluß der chemischen Stromquelle
- Klemme, f
- Pol, m
FR
- borne, f
Русско-французский словарь нормативно-технической терминологии > вывод химического источника тока
-
16 выдача документов
выдача документов
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
document lending
The service provided by a library in which the library's clients are temporarily allowed to use books and other printed materials outside the library. (Source: RHW)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > выдача документов
-
17 выдача по межбиблиотечному обмену
выдача по межбиблиотечному обмену
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
inter-library loan
The service provided by one library in which a second library's clients are temporarily allowed to use books and other printed materials belonging to the first library; and consequently the system providing rules and infrastructure for this service to a group of libraries. (Source: RHW)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > выдача по межбиблиотечному обмену
-
18 выключатель с выдержкой времени
выключатель с выдержкой времени (таймер)
Выключатель, имеющий устройство выдержки времени, которое приводит его в действие на определенное время, по истечении которого автоматически разрывается цепь выключателя, и управляемый вручную и/или дистанционно импульсным методом.
[ ГОСТ Р 51324.2.3-99 (МЭК 60669-2-3-97)]
выключатель с выдержкой времени
-
[IEV number 442-04-33]EN
ime-delay switch
TDS (abbreviation)
a switch provided with a time-delay device, which operates for a certain time (the delay time) and which is operated by hand and/or by remote control by means of pulses
[IEV number 442-04-33]FR
interrupteur temporisé
interrupteur pourvu d'un dispositif de temporisation qui le fait fonctionner pendant un certain temps (la temporisation) et qui est commandé manuellement et/ou à distance au moyen d'impulsions
[IEV number 442-04-33]Тематики
- выключатель, переключатель
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > выключатель с выдержкой времени
-
19 выключатель с дистанционным управлением
выключатель с дистанционным управлением
-
[IEV number 442-04-25]EN
remote control switch
RCS (abbreviation)
a switch provided with a coil, which is remotely controlled by means of pulses and which need not be permanently energized
[IEV number 442-04-25]FR
télérupteur
interrupteur muni d'une bobine commandée à distance au moyen d'impulsions et qui n'a pas besoin d'être excitée en permanence
[IEV number 442-04-25]Тематики
- выключатель, переключатель
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > выключатель с дистанционным управлением
-
20 гальваническая развязка
гальваническая развязка
Мероприятие или техническое средство, применение которого направлено на исключение гальванической связи между проводящими частями.
[РД-91.020.00-КТН-276-07]
гальваническая развязка
Схемотехническое решение, при котором исключается гальваническая связь между электрическими цепями. Гальваническая развязка осуществляется трансформаторами или оптоэлектронными приборами.
[Интент]EN
galvanic separation
prevention of electric conduction between two electric circuits intended to exchange power and/or signals
NOTE – Galvanic separation can be provided e.g. by an isolating transformer or an opto-coupler.
[IEV number 151-12-26]FR
séparation électrique, f
séparation galvanique (terme déconseillé), f
action ou moyen d’empêcher la conduction électrique entre deux circuits électriques prévus pour échanger de la puissance ou des signaux
NOTE – Une séparation électrique peut être obtenue, par exemple, au moyen d’un transformateur de séparation (de circuits) ou d’un optocoupleur.
[IEV number 151-12-26]Параллельные тексты EN-RU
Electrical isolation means that no current flow can occur from one electric circuit to a neighboring other electric circuit.
In case of power supplies, this means that no electric connection exists between the input side and the output side.
[ABB]Гальваническая развязка означает, что электрический ток не может протекать из какой-либо цепи в соседнюю цепь.
Для источников электропитания это означает, что не существует электрической связи между входной и выходной сторонами.
[Перевод Интент]The measured values are electrically isolated.
[Schneider Electric]Измеряемые величины гальванически развязаны от цепей устройства.
[Перевод Интент]Недопустимые, нерекомендуемые
Тематики
- электротехника, основные понятия
Близкие понятия
EN
DE
- galvanische Trennung
- Wellenimpedanz, (Leitungs-)
FR
Русско-французский словарь нормативно-технической терминологии > гальваническая развязка
См. также в других словарях:
Provided by client — is a term used by auditors. An auditor reviews documentation from multiple sources. In order to verify client data, the auditor compares documentation provided by client vendors, or from sources separate from the client. Documentation provided by … Wikipedia
Provided — Pro*vid ed, conj. On condition; by stipulation; with the understanding; if; usually followed by that; as, provided that nothing in this act shall prejudice the rights of any person whatever. [1913 Webster] Provided the deductions are logical,… … The Collaborative International Dictionary of English
provided — UK [prəˈvaɪdɪd] / US [prəˈvaɪdəd] or provided that UK / US conjunction *** only if a particular thing happens or is done You can go out to play provided that you finish your homework first. Provided you pay me back by Friday, I ll lend you the… … English dictionary
provided that — provided UK [prəˈvaɪdɪd] / US [prəˈvaɪdəd] or provided that UK / US conjunction *** only if a particular thing happens or is done You can go out to play provided that you finish your homework first. Provided you pay me back by Friday, I ll lend… … English dictionary
provided that — provided that, providing that The form provided is generally preferred, and that may be omitted in both cases: • In summer he will show visitors around the chapel provided he likes their faces and they are not wearing shorts Linguist, 1992 • It… … Modern English usage
provided — adverb assuming that, on condition that, provisionally, subject to, with the understanding, with the stipulation, with this proviso associated concepts: as provided by law Burton s Legal Thesaurus. William C. Burton. 2006 … Law dictionary
provided that — ► if, or only if: »ILO conventions allow schoolchildren to work during their holidays and free time provided that strict safety measures are taken. Main Entry: ↑provide … Financial and business terms
provided that — variant UK US Main entry: provided … Useful english dictionary
provided with arms — index armed Burton s Legal Thesaurus. William C. Burton. 2006 … Law dictionary
provided without charge — index free (at no charge), gratuitous (given without recompense) Burton s Legal Thesaurus. William C. Burton. 2006 … Law dictionary
provided — *if … New Dictionary of Synonyms