Перевод: со всех языков на все языки

со всех языков на все языки

(most+relevant)

  • 101 démarrage direct

    1. прямой пуск вращающегося электродвигателя

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > démarrage direct

  • 102 Anlauf mit direktem Einschalten

    1. прямой пуск вращающегося электродвигателя

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Anlauf mit direktem Einschalten

  • 103 прямой пуск вращающегося электродвигателя

    1. full voltage starter application
    2. DOL
    3. direct-on-line starting
    4. direct starting
    5. direct operation of a motor
    6. direct line starting
    7. across-the-line starting (US)

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Русско-английский словарь нормативно-технической терминологии > прямой пуск вращающегося электродвигателя

  • 104 прямой пуск вращающегося электродвигателя

    1. démarrage direct

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > прямой пуск вращающегося электродвигателя

  • 105 DOL

    1. эффект операционного рычага
    2. пускатель прямого действия
    3. прямой пуск вращающегося электродвигателя
    4. Министерство труда (США)
    5. концентрация растворённого кислорода

     

    концентрация растворённого кислорода

    [А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]

    Тематики

    EN

     

    Министерство труда (США)

    [А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]

    Тематики

    EN

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

     

    пускатель прямого действия
    Пускатель, одноступенчато подающий сетевое напряжение на выводы двигателя.
    (МЭС 441-14-40)
    [ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]

    Пускатели переменного тока для прямого непосредственного пуска (с полным напряжением)
    Пускатели, предназначенные для пуска двигателя, разгона его до номинальной скорости, защиты двигателя и подключенных к нему цепей от рабочих перегрузок и отключения питания двигателя.
    [ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]

    EN

    direct-on-line starter
    a starter which connects the line voltage across the motor terminals in one step
    [IEV number 441-14-40]

    FR

    démarreur direct
    démarreur qui applique la tension d'alimentation sur les bornes du moteur en une seule manoeuvre
    [IEV number 441-14-40]

    Параллельные тексты EN-RU

    Direct-on-line starters
    Starters which connect the line voltage across the motor terminals in one step, intended to start and accelerate a motor to normal speed.
    They shall ensure switching and protection functions as prescribed in the general definition.

    [ABB]

    Пускатели прямого действия
    Пускатели, одноступенчато подающие сетевое напряжение на зажимы двигателя и предназначенные для его пуска и разгона до номинальной скорости.
    Кроме того, они должны обеспечивать коммутацию и защиту в соответствии с общим определением.

    [Перевод Интент]

    Тематики

    EN

    DE

    FR

     

    эффект операционного рычага
    эффект производственного рычага

    Эффект операционного рычага - выражение того факта, что любое изменение выручки от реализации порождает изменение прибыли. Сила воздействия операционного рычага вычисляется как частное от деления выручки от реализации после возмещения переменных затрат на прибыль.
    [ http://www.lexikon.ru/dict/fin/a.html]

    Тематики

    Синонимы

    EN

    Англо-русский словарь нормативно-технической терминологии > DOL

  • 106 direct starting

    1. прямой пуск вращающегося электродвигателя
    2. прямой пуск

     

    прямой пуск

    [Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

    Тематики

    • электротехника, основные понятия

    EN

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Англо-русский словарь нормативно-технической терминологии > direct starting

  • 107 across-the-line starting (US)

    1. прямой пуск вращающегося электродвигателя

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Англо-русский словарь нормативно-технической терминологии > across-the-line starting (US)

  • 108 direct line starting

    1. прямой пуск вращающегося электродвигателя

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Англо-русский словарь нормативно-технической терминологии > direct line starting

  • 109 direct operation of a motor

    1. прямой пуск вращающегося электродвигателя

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Англо-русский словарь нормативно-технической терминологии > direct operation of a motor

  • 110 direct-on-line starting

    1. прямой пуск вращающегося электродвигателя

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Англо-русский словарь нормативно-технической терминологии > direct-on-line starting

  • 111 full voltage starter application

    1. прямой пуск вращающегося электродвигателя

     

    прямой пуск вращающегося электродвигателя
    Пуск вращающегося электродвигателя путем непосредственного подключения его к питающей сети.
    [ ГОСТ 27471-87]

    EN

    direct-on-line starting
    across-the-line starting (US)
    the process of starting a motor by connecting it directly to the supply at rated voltage
    [IEV number 411-52-15]

    FR

    démarrage direct
    mode de démarrage d'un moteur, consistant à lui appliquer directement sa pleine tension assignée
    [IEV number 411-52-15]

    0855
    Рис. ABB
    Схема прямого пуска электродвигателя

    Magnetic only circuit-breaker - Автоматический выключатель с электромагнитным расцепителем

    Contactor KL - Контактор KL

    Thermal relay - Тепловое реле

     

    Параллельные тексты EN-RU

    Direct-on-line starting

    Direct-on-line starting, which is often abbreviated as DOL, is perhaps the most traditional system and consists in connecting the motor directly to the supply network, thus carrying out starting at full voltage.

    Direct-on-line starting represents the simplest and the most economical system to start a squirrel-cage asynchronous motor and it is the most used.

    As represented in Figure 5, it provides the direct connection to the supply network and therefore starting is carried out at full voltage and with constant frequency, developing a high starting torque with very reduced acceleration times.

    The typical applications are relevant to small power motors also with full load starting.

    These advantages are linked to some problems such as, for example, the high inrush current, which - in the first instants - can reach values of about 10 to 12 times the rated current, then can decrease to about 6 to 8 times the rated current and can persist to reach the maximum torque speed.

    The effects of such currents can be identified with the high electro-dynamical stresses on the motor connection cables and could affect also the windings of the motor itself; besides, the high inrush torques can cause violent accelerations which stress the transmission components (belts and joints) generating distribution problems with a reduction in the mechanical life of these elements.

    Finally, also the possible electrical problems due to voltage drops on the supply line of the motor or of the connected equipment must be taken into consideration.
    [ABB]

    Прямой пуск

    Прямой пуск, который по-английски часто сокращенно обозначают как DOL, является, пожалуй наиболее распространенным способом пуска. Он заключается в непосредственном (т. е. прямом) подключении двигателя к питающей сети. Это означает, что пуск двигателя осуществляется при полном напряжении.

    Схема прямого пуска является наиболее простым, экономичным и чаще всего применяемым решением для электродвигателей с короткозамкнутым ротором.

    Схема прямого подключения к сети представлена на рисунке 5. Пуск осуществляется при полном напряжении и постоянной частоте сети. Электродвигатель развивает высокий пусковой момент при коротком времени разгона.

    Типичные области применения – маломощные электродвигатели, в том числе с пуском при полной нагрузке.

    Однако, наряду с преимуществами имеются и определенные недостатки, например, бросок пускового тока, достигающий в первоначальный момент 10…12-кратного значения от номинального тока электродвигателя. Затем ток двигателя уменьшается примерно до 6…8-кратного значения номинального тока и будет держаться на этом уровне до тех пор, пока скорость двигателя не достигнет максимального значения.

    Такое изменение тока оказывает значительное электродинамическое воздействие на кабель, подключенный к двигателю. Кроме того пусковой ток воздействует на обмотки двигателя. Высокий начальный пусковой момент может привести к значительному ускорению и следовательно к значительной нагрузке элементов привода (ремней, крепления узлов), что вызывает сокращение их срока службы.

    И, наконец, следует принять во внимание возможное возникновение проблем, связанных с падением напряжения в линии питания двигателя и подключенного к этой линии оборудования.
    [Перевод Интент]




     

    Тематики

    Синонимы

    EN

    DE

    FR

    Англо-русский словарь нормативно-технической терминологии > full voltage starter application

  • 112 ser pertinente

    v.
    to be relevant.
    * * *
    = apply, be in order, commend + Reflexivo + for + situation, be to the point
    Ex. This could apply particularly if the figures are to be incorporated into annual reports or other documents.
    Ex. Indexing and searching, then, are integral one to another, and so a few comments on searching are in order here = Por lo tanto, la indización y la búsqueda son complementarios y así pues es pertinente hacer algunos comentarios aquí sobre la búsqueda.
    Ex. None of these classification schemes commended itself for the particular situation of the library.
    Ex. It might be to the point to mention that most printed bibliographical tools are of this kind.
    * * *
    = apply, be in order, commend + Reflexivo + for + situation, be to the point

    Ex: This could apply particularly if the figures are to be incorporated into annual reports or other documents.

    Ex: Indexing and searching, then, are integral one to another, and so a few comments on searching are in order here = Por lo tanto, la indización y la búsqueda son complementarios y así pues es pertinente hacer algunos comentarios aquí sobre la búsqueda.
    Ex: None of these classification schemes commended itself for the particular situation of the library.
    Ex: It might be to the point to mention that most printed bibliographical tools are of this kind.

    Spanish-English dictionary > ser pertinente

  • 113 importar

    v.
    1 to import (productos) (& computing).
    La empresa importa relojes The company imports watches.
    2 to amount to, to come to.
    3 to matter.
    ya no te importo — al contrario, sí que me importas you don't care about me any more — on the contrary, you do matter to me
    no me importa lo que piense la gente I don't care what people think
    4 to matter (ser importante).
    lo que importa es que… what matters o the important thing is that…
    no importa it doesn't matter
    ¡qué importa que llueva! so what if it's raining?
    5 to mind.
    no me importa que venga tu familia I don't mind if your family comes
    preferiría no salir, si no te importa I'd rather not go out, if you don't mind o if it's all the same to you
    ¿le importa que me siente? do you mind if I sit down?
    6 to care about, to care for.
    Nos importa su salud We care about his health.
    Nos importa We care.
    7 to be important, to have importance, to matter, to import.
    Eso importa That is important.
    8 to care to, to mind.
    Nos importa participar We care to participate.
    9 to concern.
    Me importa la paz mundial World peace concerns me.
    * * *
    2 (valer) to amount to
    ¿a cuánto importa la factura? how much does the bill amount to?
    2 (molestar) to mind
    ¿te importaría cerrar la ventana? would you mind closing the window?
    \
    ¡a ti qué te importa! familiar mind your own business!
    lo que importa es que... the important thing is that...
    me importa un bledo/pito/comino familiar I couldn't care less
    no importa it doesn't matter
    * * *
    verb
    2) matter, mind
    * * *
    I
    VT (Com) to import (de from)
    II
    1. VI
    1) (=ser importante) to matter

    ¿qué importa que no seamos ricos? — what does it matter if o that we're not rich?

    - llegaremos allí un poco tarde -no importa — "we'll be there a bit late" - "never mind o it doesn't matter"

    lo que importa es la calidad — the important thing is the quality, what matters is the quality

    ¿y eso qué importa? — what does that matter?

    el color importa mucho en su pintura — colour is important in her painting, colour plays an important part in her painting

    no importa el tiempo que haga, allí estaremos — we'll be there whatever the weather

    2) [con complemento de persona]
    a) (=interesar)

    sí que me importa tu opinión — your opinion does matter to me, I do care about your opinion

    ¿a quién le importa lo que yo diga? — who cares (about) what I say?

    no le importa nada de lo que pase — he doesn't care about anything that happens, he's not bothered about anything

    tú me importas más que nada — I care about you more than anything, you mean more to me than anything

    ¿y a ti qué te importa? — what business is it of yours?

    ¡a ti eso no te importa! — it's nothing to do with you!, it's none of your business!

    meterse en lo que a uno no le importa — to poke one's nose into other people's business

    no quisiera meterme en lo que no me importa, pero... — I know it's none of my business, but...

    - no me importa un bledo o un comino o un pito o un rábano
    - no me importa un carajo o un huevo
    b) (=molestar)

    ¿te importaría prestarme este libro? — would you mind lending me this book?, could you lend me this book?

    si no le importa, me gustaría que me enviaran la factura — if it's not too much trouble, I'd like you to send me the bill

    -¿quieres venir al concierto? -pues no me importaría — "do you want to come to the concert?" - "I wouldn't mind"

    ¿te importa si fumo? — do you mind if I smoke?

    no importar a algn hacer algo, no me importa esperar — I don't mind waiting

    si os hace falta alguien, a mí no me importaría ayudaros — if you need somebody, I'd be happy to help o I don't mind helping

    no me importa que llegues un poco tarde — I don't mind if you're a bit late, I don't mind you being a bit late

    2.
    VT frm [artículo, producto] to cost; [gastos, beneficios] to amount to

    ¿cuánto importa esta lámpara? — how much does this lamp cost?

    los gastos de transporte importaron 2.000 euros — transport costs amounted to 2,000 euros

    * * *
    1.
    verbo intransitivo
    a) (tener importancia, interés) to matter

    bueno, no importa — well, never mind o well, it doesn't matter

    no importa quién lo hagait doesn't matter o it makes no difference who does it

    lo que importa es que te recuperes — the important thing is for you to get better; (+ me/te/le etc)

    ¿a mí qué me importa? — what do I care?

    ¿a ti qué te importa? — what business is it of yours?

    me importa un bledo or un comino or un pepino or un rábano — (fam) I couldn't care less, I don't give a damn (colloq)

    no te metas en lo que no te importamind your own business!

    b) ( molestar) (+ me/te/le etc)

    ¿le importaría hacerlo? — would you mind doing it?

    2.
    importar vt (Com, Fin)
    1) < productos> to import
    2) ( ascender a) to come to, amount to
    * * *
    1.
    verbo intransitivo
    a) (tener importancia, interés) to matter

    bueno, no importa — well, never mind o well, it doesn't matter

    no importa quién lo hagait doesn't matter o it makes no difference who does it

    lo que importa es que te recuperes — the important thing is for you to get better; (+ me/te/le etc)

    ¿a mí qué me importa? — what do I care?

    ¿a ti qué te importa? — what business is it of yours?

    me importa un bledo or un comino or un pepino or un rábano — (fam) I couldn't care less, I don't give a damn (colloq)

    no te metas en lo que no te importamind your own business!

    b) ( molestar) (+ me/te/le etc)

    ¿le importaría hacerlo? — would you mind doing it?

    2.
    importar vt (Com, Fin)
    1) < productos> to import
    2) ( ascender a) to come to, amount to
    * * *
    importar1
    1 = import.

    Ex: Cannot IT expertise not readily available to SLIS be imported from other relevant departments in parent institutions?.

    importar2
    2 = matter, mind, care, make + a difference.

    Ex: It does not matter where the cursor is when the ENTER key is pressed.

    Ex: They see people as marked by one particular attribute, cleverness, or kindness, or strictness, or being a good shot, and they mind whether things are right or wrong.
    Ex: In a survey carried out in the US, it became apparent that about 90% of the respondents did not know what it meant, and even fewer cared.
    Ex: If that cannot be determined, it hardly makes a difference which you use as main entry.
    * a nadie le importa nada = nobody + gives a damn.
    * importar un bledo = not give a damn, not give a shit, not give a fuck.
    * importar un comino = not give a damn, not give a shit, not give a fuck.
    * importar un pito = could not care less.
    * importar un rábano = could not care less.
    * no importa = never mind, regardless of.
    * no importa cómo = no matter how.
    * no importa lo + Adjetivo + que + Subjuntivo = no matter how + Adjetivo.
    * no importa lo bien = no matter how well.
    * No importa lo que se conoce, sino a quién se conoce = It's not what you know, but who you know.
    * no importar = be all right with + Persona, make + no difference, cope with.
    * no importar Algo a Alguien = think + little of.
    * no importar en absoluto = have + no qualms about.
    * no importar + Infinitivo = think + nothing of + Gerundio.
    * no importar lo más mínimo = could not care less.
    * no importar lo que + pensar de = whatever + Pronombre + make of.
    * no importar nada = not give a damn, not give a shit, not give a fuck.
    * no importa si... o = no matter whether... or.
    * sin importar = regardless of, independently of, disregarding.
    * sin importar el tiempo = all-weather.
    * sin importar las consecuencias = regardless of the consequences.
    * sin importar qué = no matter what/which.

    * * *
    importar [A1 ]
    vi
    1 (tener importancia, interés) to matter
    se me olvidó — bueno, no importa I forgot — well, never mind o well, it doesn't matter
    no importa que sea caro si es de buena calidad it doesn't matter if it's expensive as long as it's good quality
    no importa quién lo haga it doesn't matter o it makes no difference who does it
    no importa el tamaño the size isn't important o doesn't matter
    ¿qué importa que él no venga? what does it matter o what difference does it make if he doesn't come?
    ahora lo que importa es que te recuperes the important thing now is for you to get better
    (+ me/te/le etc): no me importa lo que pueda pensar él I don't care what he thinks
    ¿a mí qué me importa que a él no le guste? what do I care if he doesn't like it?
    ¿a ti qué te importa? what business is it of yours?, what's it to you? ( colloq)
    yo no le importo — sí que le importas, y mucho I don't mean a thing to him — that's not true, he cares a great deal for o about you
    me importa un bledo or un comino or un pepino or un pimiento or un pito or un rábano or ( Méx) un cacahuate ( fam); I couldn't care less, I don't give a damn ( colloq)
    me importa un carajo or un huevo or ( Col) un culo ( vulg) I don't give a fuck ( vulg), I don't give a toss ( BrE sl)
    meterse en lo que no le importa ( fam); to poke one's nose into other people's business ( colloq)
    cállate y no te metas en lo que no te importa shut up and don't poke your nose into other people's business!, shut up and mind your own business! ( colloq)
    2 (molestar) (+ me/te/le etc):
    ¿te importaría dejarlo para mañana? would you mind leaving it till tomorrow?
    no me importa viajar de noche I don't mind traveling at night, I'm quite happy to travel at night
    a mí no me importaría venir el sábado I wouldn't mind coming on Saturday, I'd be quite happy to come on Saturday
    si no te importa, hoy me voy a ir temprano if it's all right with you, I'm going to leave early today
    no me importa que me llame a casa I don't mind you calling me at home
    ¿le importaría acompañarme? would you mind accompanying me?
    ■ importar
    vt
    A ‹productos/petróleo› to import
    B ( Inf) ‹datos/información› to import
    C (ascender a) to come to, amount to
    si la compra importa 500 pesos o más if your purchase comes to o amounts to 500 pesos or more
    * * *

     

    importar ( conjugate importar) verbo intransitivo
    a) (tener importancia, interés) to matter;

    no importa quién lo haga it doesn't matter o it makes no difference who does it;

    lo que importa es que te recuperes the important thing is for you to get better;
    no me importa lo que piense I don't care what he thinks;
    ¿a mí qué me importa? what do I care?;
    ¿a ti qué te importa? what business is it of yours?;
    yo no le importo I don't mean a thing to him;
    me importa un bledo or un comino or un pepino or un rábano (fam) I couldn't care less, I don't give a damn (colloq);
    meterse en lo que no le importa (fam) to poke one's nose into other people's business (colloq);
    no te metas en lo que no te importa mind your own business!
    b) ( molestar):


    no me importa que me llame a casa I don't mind him calling me at home
    verbo transitivo (Com, Fin) ‹ productos to import
    importar
    I verbo intransitivo
    1 (tener valor o interés) to be important, matter: eso es lo único que importa, that's all that matters
    me importa mucho tu salud, your health really matters to me
    no importa, it doesn't matter
    2 (incumbir) eso no les importa a los vecinos, that doesn't concern the neighbours
    y a ti, ¿qué te importa?, and what business is it of yours?
    3 (estorbar, disgustar) to mind: ¿le importaría deletrearlo?, would you mind spelling it?
    no le importa cocinar todos los días, he doesn't mind cooking every day
    ¿te importa si abro la ventana?, do you mind if open the window? ➣ Ver nota en mind
    II vtr Fin Inform to import
    ♦ Locuciones: familiar me importa un bledo/pepino/pimiento/ rábano, I couldn't care less
    ' importar' also found in these entries:
    Spanish:
    ir
    - pepino
    - pimiento
    - pito
    - significar
    - dar
    - rábano
    - valer
    English:
    care
    - import
    - lift
    - matter
    - mind
    * * *
    vt
    1. [productos, materias primas, costumbres] to import (de from)
    2. Informát to import
    3. Formal [sujeto: factura, coste] to amount to, to come to;
    la factura importa 5.000 pesos the bill comes to 5,000 pesos
    vi
    1. [preocupar, tener interés] to matter;
    no importa el precio, cómpralo de todas formas the price doesn't matter, buy it anyway;
    no me importa lo que piense la gente I don't care what people think;
    ya no te importo – al contrario, sí que me importas you don't care about me any more – on the contrary, you do matter to me;
    lo que importa es que todos salieron ilesos del accidente what matters o the important thing is that nobody was hurt in the accident;
    lo que me importa es saber quién lo hizo the important thing for me is to know who did it
    2. [incumbir, afectar]
    esto es algo entre tú y yo, y a nadie más le importa this is between you and me and hasn't got anything to do with anyone else;
    ¡no te importa! it's none of your business!;
    ¿a mí qué me importa? what's that to me?, what do I care?;
    ¿y a ti qué te importa? what's it got to do with you?;
    ¿adónde vas? – ¿te importa? [con enfado] where are you going? – what's it to you!;
    Fam
    siempre está metiéndose en lo que no le importa she's always sticking her nose into other people's business;
    Fam
    me importa un bledo o [m5] comino o [m5] pito o Chile [m5] pucho o [m5] rábano I don't give a damn, I couldn't care less;
    Esp Vulg
    me importa un cojón o [m5] tres cojones I couldn't give a shit o Br toss
    3. [molestar] to mind;
    no me importa tener que tomar el tren todos los días I don't mind having to catch the train every day;
    no me importa que venga tu familia I don't mind if your family comes;
    preferiría no salir, si no te importa I'd rather not go out, if you don't mind o if it's all the same to you;
    ¿le importa que me siente? do you mind if I sit down?;
    ¿te importaría acompañarme? would you mind coming with me?
    v impersonal
    to matter;
    no importa it doesn't matter;
    si no vienes, no importa, ya nos arreglaremos it doesn't matter o never mind if you can't come, we'll manage;
    ¡qué importa que llueva! so what if it's raining?
    * * *
    1 v/i
    1 matter;
    no importa it doesn’t matter;
    ¿qué importa? what does it matter?
    2
    :
    eso a ti no te importa that’s none of your business
    3
    :
    ¿le importa …? do you mind …?;
    ¿te importaría que pase por tu casa? would you mind if I dropped by?
    2 v/t COM import
    * * *
    : to matter, to be important
    no le importa lo que piensen: she doesn't care what they think
    : to import
    * * *
    1. (tener importancia) to matter
    lo que más le importa es su familia her family is what matters most to her / her family is the most important thing to her
    2. (preocupar) to care about
    3. (molestar) to mind
    ¿te importa que fume? do you mind if I smoke?
    me importa un bledo/pepino, etc I couldn't care less

    Spanish-English dictionary > importar

  • 114 off

    [ɒf, Am ɑ:f] adv
    1) ( not on) aus;
    to switch [or turn] sth \off etw ausschalten
    2) ( away) weg-;
    someone's run \off with my pen jemand hat mir meinen Stift geklaut ( fam)
    if we can get \off early tomorrow morning we'll avoid most of the traffic wenn wir morgen frühzeitig loskommen, können wir den größten Verkehr vermeiden; ( fig)
    I didn't get \off to a very good start this morning der Tag hat für mich nicht gut angefangen;
    I'm \off now - see you tomorrow ich gehe jetzt - wir sehen uns morgen;
    she's \off to Canada next week sie fährt nächste Woche nach Kanada;
    to drive \off wegfahren;
    to go \off weggehen;
    I'm just going \off to the shops ich gehe nur schnell mal einkaufen;
    to see sb \off jdn verabschieden
    3) ( removed) ab-;
    I'll take my jacket \off ich werde meine Jacke ausziehen;
    \off with his head! Kopf ab!;
    \off with your jacket! zieh die Jacke aus!;
    one of my buttons has come \off einer von meinen Knöpfen ist abgegangen;
    to cut sth \off etw abschneiden
    between us we managed to finish \off eight bottles of wine ( fam) zusammen schafften wir es, acht Weinflaschen zu leeren;
    to burn sth \off etw verbrennen;
    to kill sth \off etw vernichten [o ausrotten];
    to pay sth \off etw abbezahlen
    5) ( in bad shape) schlecht;
    to go \off sich akk verschlechtern
    6) ( distant) entfernt;
    to be far \off weit weg sein;
    the exams are so far \off es ist noch so lange hin bis zu den Prüfungen
    7) ( stopped) abgesagt;
    the wedding's \off die Hochzeit ist abgeblasen ( fam)
    his hockey match was rained \off sein Hockeyspiel fand wegen Regen nicht statt;
    it's all \off between Philippa and Mike ( fam) zwischen Philippa und Mike ist es aus;
    to call sth \off etw absagen
    8) ( discounted) reduziert;
    there's 40% \off this week on all winter coats diese Woche gibt es einen Preisnachlass von 40% auf alle Wintermäntel;
    to get money \off Rabatt bekommen
    to shut \off streets Straßen sperren;
    to fence sth \off etw abzäunen
    we went out for a while to walk \off some of our dinner wir gingen eine Weile raus, um einen Verdauungsspaziergang zu machen;
    he's gone to sleep \off a headache after rather too much alcohol er ist dabei, seinen Kater auszuschlafen;
    to laugh sth \off etw mit einem Lachen abtun adj
    1) ( switched off) aus[geschaltet];
    I can't find the \off switch ich kann den Schalter nicht finden
    2) pred ( bad) verdorben; milk sour;
    the cream is \off die Sahne hat einen Stich;
    to go \off schlecht werden
    to be \off freihaben;
    he's \off at the moment er hat momentan frei;
    she had six weeks \off because of sickness last year sie hatte letztes Jahr sechs Wochen wegen Krankheit freigenommen;
    to take/have some time \off einige Zeit freinehmen/freibekommen
    4) pred (fam: in bad shape) schlecht;
    I'm having an \off day today ich habe heute einen schlechten Tag
    to be badly/well \off schlecht/gut situiert sein;
    I'm quite well \off for sweaters was Pullover angeht, bin ich gut ausgestattet;
    (Brit, Aus)
    how are you \off for money? wie sieht es bei dir mit dem Geld aus?
    6) pred food ( run out) aus;
    the waiter explained that the salmon was \off der Kellner sagte, dass der Lachs ausverkauft sei
    7) pred ( esp Brit) ( fam);
    a bit \off ein dicker Hund ( fam), nicht die feine Art prep
    1) after vb ( moving away) [weg] von +dat;
    please take your foot \off mine nimm bitte deinen Fuß von meinem [herunter];
    I can't get this paint \off my hands ich bekomme die Farbe nicht von meinen Händen ab;
    keep your dog \off my property! halten Sie Ihren von meinem Grundstück fern!;
    that cherry stain won't come \off the shirt dieser Kirschfleck geht nicht aus dem Hemd heraus;
    has anyone taken a book \off my desk? hat jemand ein Buch von meinem Tisch weggenommen?;
    let's get \off the bus at the next stop lass uns bei der nächsten Bushaltestelle aussteigen;
    to get \off sb/ sth ( fam) jdn/etw in Ruhe lassen
    2) after vb ( moving down) herunter [von] +dat, hinunter [von] +dat;
    they jumped \off the cliff sie sprangen die Klippe hinunter;
    the boy fell \off his bike several times der Junge fiel ein paar Mal von seinem Fahrrad herunter;
    he rolled \off the bed er rollte aus dem Bett;
    the coat slipped \off his arms der Mantel rutschte von seinen Armen
    3) after vb ( away from) weg von +dat;
    single wires are leading \off the main lines einzelne Drähte führen von der Hauptleitung weg after adj
    far \off weit entfernt;
    we're not far \off London now wir sind nicht weit von London entfernt;
    how far \off finishing the project are we? wie viel Zeit haben wir noch bis zum Ende des Projekts? after adv
    just \off sth in der Nähe von etw dat;
    they live just \off the main street sie wohnen gleich bei der Hauptstraße after n
    a long way \off doing sth noch weit von etw dat entfernt sein;
    we're still a long way \off finishing wir sind noch weit vom Ende entfernt;
    \off the point nicht relevant;
    somehow we keep getting \off the point wir kommen irgendwie vom Thema ab;
    \off the record inoffiziell, nicht für die Öffentlichkeit bestimmt;
    \off the subject of sth nicht zu einem Thema gehörend, etw nicht betreffend;
    to get \off the subject vom Thema abschweifen;
    I wish we could talk about something \off the subjects of sports and cars ich würde gerne mal über ein anderes Thema als Sport oder Autos reden
    4) ( separated from) von +dat;
    he wiped all the dust \off the tables er wischte den ganzen Staub von den Tischen;
    to cut a piece \off the cheese ein Stück Käse abschneiden
    5) after vb ( out at sea) vor +dat;
    to anchor \off Blue Bay vor Blue Bay ankern after n
    six miles \off Dunkirk sechs Meilen vor Dünkirchen
    to be \off work am Arbeitsplatz fehlen;
    he's been \off work for over six months er war seit sechs Monaten nicht mehr bei der Arbeit
    7) (fam: stop liking)
    to be \off sb/ sth jdn/etw leid sein;
    to be \off one's food keinen Appetit haben;
    to go \off sb/ sth jdn/etw nicht mehr mögen;
    I used to love wine but I've gone \off it recently ich habe immer gerne Wein getrunken, aber seit kurzem mag ich in nicht mehr
    8) ( not using)
    to come \off the pill die Pille nicht mehr nehmen;
    to be/come \off sth etw weglassen;
    she's well enough to be \off the medicine es geht ihr gut genug, um die Medizin abzusetzen;
    to be \off the tablets ohne die Tabletten auskommen;
    to have sb \off one's feet ( fig) jdn umwerfen ( fig)
    9) ( utilizing)
    to do sth \off sth etw von etw dat tun;
    they live \off a small inheritance sie leben von einem kleinen Erbe;
    the car runs \off solar energy der Wagen läuft mit Solarenergie
    he managed to stay \off alcohol er schaffte es, keinen Alkohol mehr anzurühren
    to do sth \off sb etw von jdm tun;
    I don't like taking money \off you ich möchte kein Geld von dir nehmen;
    the girl bought the boy's old bike \off him das Mädchen kaufte dem Jungen sein altes Rad ab;
    to get sth \off sb ( fam) etw von jdm bekommen
    12) after n ( minus) weniger;
    I take $10 \off the price of the jeans for you ich lasse Ihnen $10 vom Preis für die Jeans nach;
    there was $40 or $50 \off most jackets in the shop die meisten Jacken in dem Laden waren um $40 oder $50 billiger
    13) radio, tv ( stopped)
    to be \off the air nicht mehr senden;
    the TV station goes \off the air at 11:30 die Fernsehstation beendet ihr Programm um 23.30 Uhr
    PHRASES:
    \off beam ( Brit) ( fam) daneben ( fam)
    to be \off beam daneben liegen ( fam)
    \off the cuff aus dem Stegreif;
    \off one's head nicht ganz bei Trost;
    he is \off his head er hat den Verstand verloren;
    \off the top of one's head aus dem Stegreif;
    \off the wall ausgeflippt ( fam)
    to go \off the wall ausflippen ( fam) n
    to be ready for the \off bereit zum Gehen sein vt (Am) (sl);
    to \off sb jdn um die Ecke bringen ( fam), jdn abmurksen (sl); [o ( fam) umlegen]

    English-German students dictionary > off

  • 115 Intelligence

       There is no mystery about it: the child who is familiar with books, ideas, conversation-the ways and means of the intellectual life-before he begins school, indeed, before he begins consciously to think, has a marked advantage. He is at home in the House of intellect just as the stableboy is at home among horses, or the child of actors on the stage. (Barzun, 1959, p. 142)
       It is... no exaggeration to say that sensory-motor intelligence is limited to desiring success or practical adaptation, whereas the function of verbal or conceptual thought is to know and state truth. (Piaget, 1954, p. 359)
       ntelligence has two parts, which we shall call the epistemological and the heuristic. The epistemological part is the representation of the world in such a form that the solution of problems follows from the facts expressed in the representation. The heuristic part is the mechanism that on the basis of the information solves the problem and decides what to do. (McCarthy & Hayes, 1969, p. 466)
       Many scientists implicitly assume that, among all animals, the behavior and intelligence of nonhuman primates are most like our own. Nonhuman primates have relatively larger brains and proportionally more neocortex than other species... and it now seems likely that humans, chimpanzees, and gorillas shared a common ancestor as recently as 5 to 7 million years ago.... This assumption about the unique status of primate intelligence is, however, just that: an assumption. The relations between intelligence and measures of brain size is poorly understood, and evolutionary affinity does not always ensure behavioral similarity. Moreover, the view that nonhuman primates are the animals most like ourselves coexists uneasily in our minds with the equally pervasive view that primates differ fundamentally from us because they lack language; lacking language, they also lack many of the capacities necessary for reasoning and abstract thought. (Cheney & Seyfarth, 1990, p. 4)
       Few constructs are asked to serve as many functions in psychology as is the construct of human intelligence.... Consider four of the main functions addressed in theory and research on intelligence, and how they differ from one another.
       1. Biological. This type of account looks at biological processes. To qualify as a useful biological construct, intelligence should be a biochemical or biophysical process or at least somehow a resultant of biochemical or biophysical processes.
       2. Cognitive approaches. This type of account looks at molar cognitive representations and processes. To qualify as a useful mental construct, intelligence should be specifiable as a set of mental representations and processes that are identifiable through experimental, mathematical, or computational means.
       3. Contextual approaches. To qualify as a useful contextual construct, intelligence should be a source of individual differences in accomplishments in "real-world" performances. It is not enough just to account for performance in the laboratory. On [sic] the contextual view, what a person does in the lab may not even remotely resemble what the person would do outside it. Moreover, different cultures may have different conceptions of intelligence, which affect what would count as intelligent in one cultural context versus another.
       4. Systems approaches. Systems approaches attempt to understand intelligence through the interaction of cognition with context. They attempt to establish a link between the two levels of analysis, and to analyze what forms this link takes. (Sternberg, 1994, pp. 263-264)
       High but not the highest intelligence, combined with the greatest degrees of persistence, will achieve greater eminence than the highest degree of intelligence with somewhat less persistence. (Cox, 1926, p. 187)
       There are no definitive criteria of intelligence, just as there are none for chairness; it is a fuzzy-edged concept to which many features are relevant. Two people may both be quite intelligent and yet have very few traits in common-they resemble the prototype along different dimensions.... [Intelligence] is a resemblance between two individuals, one real and the other prototypical. (Neisser, 1979, p. 185)
       Given the complementary strengths and weaknesses of the differential and information-processing approaches, it should be possible, at least in theory, to synthesise an approach that would capitalise upon the strength of each approach, and thereby share the weakness of neither. (Sternberg, 1977, p. 65)

    Historical dictionary of quotations in cognitive science > Intelligence

  • 116 НКУ защищенное

    1. geschlossene (gekapselte) Schaltgerätekombination

     

    НКУ защищенное
    НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    защищенное НКУ
    НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    enclosed assembly (of switchgear and controlgear)
    an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
    NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
    [IEV number 441-12-02]

    FR

    ensemble (d'appareillage de connexion et de commande)
    sous enveloppe
    ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
    NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
    [IEV number 441-12-0

    0078
    Шкаф - защищенное НКУ, предназначенное для установки на полу


    Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
    Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
    Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.


    Safety enclosed switchgear may be classified with respect to purpose of application as follows:
    1. General medium- or high-voltage switchgear
    2. Primary unit substations
    3. Rectifier unit substations
    4. Secondary unit substations or power centers
    5. General low-voltage switchgear
    6. Low-voltage distribution switchboards
    7. Motor-control-center switchboards

    [American electricians’ handbook]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Русско-немецкий словарь нормативно-технической терминологии > НКУ защищенное

  • 117 sous enveloppe

    1. НКУ защищенное

     

    НКУ защищенное
    НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    защищенное НКУ
    НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    enclosed assembly (of switchgear and controlgear)
    an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
    NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
    [IEV number 441-12-02]

    FR

    ensemble (d'appareillage de connexion et de commande)
    sous enveloppe
    ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
    NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
    [IEV number 441-12-0

    0078
    Шкаф - защищенное НКУ, предназначенное для установки на полу


    Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
    Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
    Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.


    Safety enclosed switchgear may be classified with respect to purpose of application as follows:
    1. General medium- or high-voltage switchgear
    2. Primary unit substations
    3. Rectifier unit substations
    4. Secondary unit substations or power centers
    5. General low-voltage switchgear
    6. Low-voltage distribution switchboards
    7. Motor-control-center switchboards

    [American electricians’ handbook]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > sous enveloppe

  • 118 geschlossene (gekapselte) Schaltgerätekombination

    1. НКУ защищенное

     

    НКУ защищенное
    НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    защищенное НКУ
    НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    enclosed assembly (of switchgear and controlgear)
    an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
    NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
    [IEV number 441-12-02]

    FR

    ensemble (d'appareillage de connexion et de commande)
    sous enveloppe
    ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
    NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
    [IEV number 441-12-0

    0078
    Шкаф - защищенное НКУ, предназначенное для установки на полу


    Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
    Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
    Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.


    Safety enclosed switchgear may be classified with respect to purpose of application as follows:
    1. General medium- or high-voltage switchgear
    2. Primary unit substations
    3. Rectifier unit substations
    4. Secondary unit substations or power centers
    5. General low-voltage switchgear
    6. Low-voltage distribution switchboards
    7. Motor-control-center switchboards

    [American electricians’ handbook]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > geschlossene (gekapselte) Schaltgerätekombination

  • 119 НКУ защищенное

    1. safety enclosed switchgear
    2. safety enclosed board
    3. enclosed switchboard
    4. enclosed assembly (of switchgear and controlgear)

     

    НКУ защищенное
    НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    защищенное НКУ
    НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    enclosed assembly (of switchgear and controlgear)
    an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
    NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
    [IEV number 441-12-02]

    FR

    ensemble (d'appareillage de connexion et de commande)
    sous enveloppe
    ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
    NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
    [IEV number 441-12-0

    0078
    Шкаф - защищенное НКУ, предназначенное для установки на полу


    Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
    Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
    Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.


    Safety enclosed switchgear may be classified with respect to purpose of application as follows:
    1. General medium- or high-voltage switchgear
    2. Primary unit substations
    3. Rectifier unit substations
    4. Secondary unit substations or power centers
    5. General low-voltage switchgear
    6. Low-voltage distribution switchboards
    7. Motor-control-center switchboards

    [American electricians’ handbook]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Русско-английский словарь нормативно-технической терминологии > НКУ защищенное

  • 120 НКУ защищенное

    1. sous enveloppe
    2. ensemble (d'appareillage de connexion et de commande)

     

    НКУ защищенное
    НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    защищенное НКУ
    НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    enclosed assembly (of switchgear and controlgear)
    an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
    NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
    [IEV number 441-12-02]

    FR

    ensemble (d'appareillage de connexion et de commande)
    sous enveloppe
    ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
    NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
    [IEV number 441-12-0

    0078
    Шкаф - защищенное НКУ, предназначенное для установки на полу


    Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
    Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
    Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.


    Safety enclosed switchgear may be classified with respect to purpose of application as follows:
    1. General medium- or high-voltage switchgear
    2. Primary unit substations
    3. Rectifier unit substations
    4. Secondary unit substations or power centers
    5. General low-voltage switchgear
    6. Low-voltage distribution switchboards
    7. Motor-control-center switchboards

    [American electricians’ handbook]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > НКУ защищенное

См. также в других словарях:

  • Relevant alternatives theory — (RAT) is an epistemological theory of knowledge, according to which to know some proposition p one must be able to rule out all the relevant alternatives to p .IntroductionRelevant alternatives theory was primarily developed by Fred Dretske. It… …   Wikipedia

  • Relevant space — refers to a market research methodology developed to overcome the shortcomings of traditional brand tracking and brand choice techniques. Crafted by researchers at Cisco Systems (Bryan Maach and Engeli Gagni) and… …   Wikipedia

  • Most (film) — Most Directed by Bobby Garabedian Produced by Jim Van Eerden Written by …   Wikipedia

  • Relevant market — Competition law Basic concepts History of competition law Monopoly Coercive monopoly Natural monopoly …   Wikipedia

  • relevant — 01. I was able to find a book in the library that will be [relevant] to my research project. 02. Talking about the personal life of employees is not [relevant] to a discussion of their ability to do their job. 03. Ideas of loyalty to one s… …   Grammatical examples in English

  • relevant accounts — The accounts that should be used to determine the amount of distributable profit of a company. These accounts are the most recent audited annual accounts of the company, prepared in compliance with the Companies Act. If the accounts are qualified …   Accounting dictionary

  • Culturally relevant teaching — is a pedagogy that empowers students intellectually, socially, emotionally, and politically by using cultural referents to impart knowledge, skills, and attitudes. [1] First introduced by Dr.Gloria Ladson Billings in 1992 as culturally relevant… …   Wikipedia

  • California Vehicle Code - Bicycle Relevant Sections — The California Vehicle Code is an official drivers safety guide maintained by the Department of Motor Vehicles to ensure those on the road are driving as they should. Bicycle Relevant Sections The portions relevant to the operator of a bicycle in …   Wikipedia

  • FBI Most Wanted Terrorists — Banner used by the FBI since inception on October 10, 2001 as the main title for the web site pages of both the group of wanted terrorists, and also on the wanted poster of each terrorist fugitive. The three overlapping seals on the left are the… …   Wikipedia

  • Socially Relevant Computing — (SRC) is a unique paradigm in computing introduced by the researchers at the University at Buffalo, Rice University and Microsoft Research. It focuses on the use of computation to solve problems that students are most passionate about. It… …   Wikipedia

  • List of most expensive cities for expatriate employees — These are lists of the world s most expensive cities, according to the Mercer Human Resource Consulting,[1] Economist Intelligence Unit[2] and ECA International[3] cost of living surveys. Other surveys from online collaborative indices, such as… …   Wikipedia

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»