-
61 breaking-in
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
приработка оборудования
обкатка оборудования
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
Синонимы
EN
Англо-русский словарь нормативно-технической терминологии > breaking-in
-
62 breakingin
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
Англо-русский словарь нормативно-технической терминологии > breakingin
-
63 bringing into service
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
Англо-русский словарь нормативно-технической терминологии > bringing into service
-
64 commission
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
комиссионное вознаграждение
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]
комиссионное вознаграждение
Плата, получаемая агентом (комиссионером) от принципала (комитента) за совершение одной или нескольких операций купли-продажи. Такая практика регулируется Гражданским кодексом РФ. Обычно К.в. составляет 2-5 % стоимости сделки.
[ http://slovar-lopatnikov.ru/]Тематики
EN
комиссия
Комиссия по фитосанитарным мерам, основанная в соответствии со статьёй XI (МККЗР) (МККЗР, 1997).
[Mеждународные стандарты по фитосанитарным мерам МСФМ № 5. Глоссарий фитосанитарных терминов]Тематики
EN
FR
совершение какого-либо действия
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
EN
Англо-русский словарь нормативно-технической терминологии > commission
-
65 going into operation
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
Англо-русский словарь нормативно-технической терминологии > going into operation
-
66 implementation
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
внедрение
1. Процесс планомерного перевода объекта (предприятия или организации, системы управления, отдельного процесса или его элемента) из существующего состояния в новое, предусмотренное проектом.
2. Распространение нововведений, достижение практического использования прогрессивных идей, изобретений, результатов научных исследований.
[ http://www.lexikon.ru/dict/buh/index.html]Тематики
EN
осуществление системы автоматизации подстанции
Фаза разработки, на которой достигается работоспособное состояние аппаратных и программных средств системы автоматизации подстанции.
[ ГОСТ Р 54325-2011 (IEC/TS 61850-2:2003)]EN
implementation
development phase in which the hardware and software of a system become operational
[IEC 61850-2, ed. 1.0 (2003-08)]Тематики
EN
Англо-русский словарь нормативно-технической терминологии > implementation
-
67 putting into operation
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
Англо-русский словарь нормативно-технической терминологии > putting into operation
-
68 start up
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
начальные действия
установка (диска, экрана) в исходное состояние
—
[Е.С.Алексеев, А.А.Мячев. Англо-русский толковый словарь по системотехнике ЭВМ. Москва 1993]Тематики
Синонимы
- установка (диска, экрана) в исходное состояние
EN
- disk, screen
- start up
2.121 ввод в эксплуатацию (start up): Действие по подготовке и переводу в эксплуатацию чистого помещения со всеми подсистемами, включая комплект документации, наличие обученного персонала, вспомогательных служб и пр.
[ИСО 14644-4:2001, статья 3.10]
Источник: ГОСТ Р ИСО 14644-6-2010: Чистые помещения и связанные с ними контролируемые среды. Часть 6. Термины оригинал документа
Англо-русский словарь нормативно-технической терминологии > start up
-
69 start-up
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
Англо-русский словарь нормативно-технической терминологии > start-up
-
70 start-up service
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
Англо-русский словарь нормативно-технической терминологии > start-up service
-
71 startup
ввод в эксплуатацию
Событие, фиксирующее готовность изделия к использованию по назначению, документально оформленное в установленном порядке.
Примечание - Для специальных видов техники к вводу в эксплуатацию дополнительно относят подготовительные работы, контроль, приемку и закрепление изделия за эксплуатирующим подразделением
[ ГОСТ 25866-83 Эксплуатация техники. Термины и определения.]FR
Параллельные тексты EN-RU
No more pulleys nor belts to adjust during start up and service
[Lennox]Не нужно регулировать положение шкивов и натяжение ремней при вводе в эксплуатацию и во время технического обслуживания.
[Перевод Интент]
START-UP
Once the equipment has been placed in its definitive location, Schneider Electric CPCS factory-trained service personnel will energize and check the functionality of the equipment in all modes of operation and conduct various tests to obtain internal power supply voltage readings, temperature, pressure and other critical checks.
CPCS - Critical Power & Cooling Services
[Schneider Electric]
Putting into operation vs. Commissioning
Hello!
What is the difference in the use of terms "commissioning" and "putting into operation"?
Are they absolutely interchangeable or there are certain tints in their meaning, which limit their applicatoin in this or that context?
=======================================I am an engineer who works in the field, commissioning equipment.
Commissioning is the process where everything associated with the equipment is fully checked, all items are simulated or caused to happen, all possible events are tested, all methods of failure are accounted for. In other words, the complete design of the equipment is tested. Then, and only then, equipment is run and shown to be according to the design.
This is commissioning.
You could put equipment into operation without fully checking all systems. You can just run equipment and hope that all safety systems work according to plan.
That is the difference. No manufacturer or reputable engineering firm would simply put equipment into operation.
[ http://www.usingenglish.com/forum/threads/136100-Putting-into-operation-vs-Commissioning]Тематики
- система техн. обслуж. и ремонта техники
EN
Англо-русский словарь нормативно-технической терминологии > startup
-
72 security service
охранные услуги
Работы по обеспечению охраны и безопасности собственности и личности технические средства, предназначенные для обеспечения охраны/безопасности.
[РД 25.03.001-2002]Тематики
EN
сервис безопасности
Сервис уровня, обеспечивающий безопасность систем или передачи данных.
[Е.С.Алексеев, А.А.Мячев. Англо-русский толковый словарь по системотехнике ЭВМ. Москва 1993]Тематики
EN
служба безопасности
Служба безопасности работает в контакте с правительственными органами, которые обеспечивают общую безопасность Игр, а именно защиту, охрану и реагирование на аварийные ситуации. В ведение службы входят такие охраняемые области, как центр управления, контрольно-пропускные пункты, помещения для задержанных/проведения допросов. Также данная служба гарантирует полную безопасность спортсменам, официальным и должностным лицам высокого ранга, представителям СМИ, персоналу ОКОИ/волонтерам, маркетинг-партнерам и зрителям. ОКОИ может учредить функциональное подразделение, осуществляющее все
аспекты безопасности.
[Департамент лингвистических услуг Оргкомитета «Сочи 2014». Глоссарий терминов]EN
security service
Security area works with the national government, which is responsible for the management of all aspects of security for the Games, including protection, safety and disaster response. Security also manages the support areas used by security staff, such as the command centre, access control and holding/interview room, to provide a safe environment for athletes, officials, VIPs, media, OCOG staff/volunteers, marketing partners and spectators. The OCOG may establish a functional area dealing with security aspects.
[Департамент лингвистических услуг Оргкомитета «Сочи 2014». Глоссарий терминов]Тематики
EN
услуга безопасности
Услуга, предоставляемая каким-либо уровнем открытых систем связи, которая гарантирует достаточную защиту систем или процессов передачи данных. Рекомендация МСЭ-Т X.800.
[ http://www.rfcmd.ru/glossword/1.8/index.php?a=index&d=4268]Тематики
EN
2.40 сервис безопасности (security service): Сервис, предоставляемый уровнем взаимодействия открытых систем, обеспечивающий надлежащую степень безопасности систем или передачи данных [8].
Англо-русский словарь нормативно-технической терминологии > security service
-
73 recommendation
1) инструкция (напр. по уходу)2) мн. ч. инструкция (документ, дополняющий и развивающий основные нормы и положения СНиП)•- maintenance recommendation - underwater works recommendations - safety recommendations
См. также в других словарях:
Safety (firearms) — This article is about the mechanical safety devices built into most firearms. For the main article about firearm safety education, see Gun safety. Close up shot of a safety of an M16A2 rifle. In firearms, a safety or safety catch is a mechanism… … Wikipedia
Safety engineer — cope of a Safety EngineerTo perform their professional functions, safety engineering professionals must have education, training and experience in a common body of knowledge. They need to have a fundamental knowledge of physics, chemistry,… … Wikipedia
Safety wire — Safety wiring of two pairs of drilled head bolts Safety wire or lockwire is common in the aircraft and racing industries as an extra precaution to keep vital fasteners from unintentionally loosening and parts from falling off due to vibration or… … Wikipedia
Safety Jackpot — A gamecard based safety incentive program. Safety Jackpot was created in 1991 by Buck Peavey president / CEO of Peavey Performance Systems, a division of the Peavey Corporation. The program is marketed to companies in a variety of industries.… … Wikipedia
Safety in NASCAR — Michael McDowell s Car of Tomorrow after a qualifying accident at Texas Motor Speedway in 2008. Safety in NASCAR has evolved into one of the biggest concerns in the sport of NASCAR. Mainly after the death of Dale Earnhardt, a seven time Winston… … Wikipedia
Safety Catch — Infobox Radio Show show name = Safety Catch imagesize = caption = other names = format = Sitcom runtime = 30 minutes country = United Kingdom language = English home station = BBC Radio 4 syndicates = television = starring = Darren Boyd Joanna… … Wikipedia
Safety testing of explosives — The safety testing of explosives involves the determination of various properties of the different energetic materials that are used in commercial, mining, and military applications. It is highly desirable to measure the conditions under which… … Wikipedia
Safety and Reliability Society (SaRS) — The Safety and Reliability Society (SaRS) was formed in the UK in 1980, and now has approximately 600 members in the UK, mainland Europe, the Middle East, USA and the Asia Pacific region. The address of the Society is Clayton House, 59 Piccadilly … Wikipedia
Safety Equipment Institute — The Safety Equipment Institute (SEI) is a private, non profit organization established to administer non governmental, third party certification programs to test and certify a broad range of safety and protective products. It is accredited to… … Wikipedia
Public Safety Canada — Departments of the Government of Canada Public Safety Sécurité publique et Protection civile … Wikipedia
Minister of Public Safety (Canada) — Minister of Public Safety Ministry Federal … Wikipedia