principal+market

SUBJECT AREA: Agricultural and food technology

[br]

[br]

[br]

A farmer's son, at the age of 17 McKay developed modifications to the existing stripper harvester and created a machine that would not only strip the seed from standing corn, but was able to produce a threshed, winnowed and clean sample in one operation. The prototype was produced in 1884 and worked well on the two acres of wheat that had been set aside on the family farm. By arrangement with a Melbourne plough maker, five machines were made and sold for the 1885 season. In 1886 the McKay Harvester Company was formed, with offices at Ballarat, from which the machines, built by various companies, were sold. The business expanded quickly, selling sixty machines in 1888, and eventually rising to the production of nearly 2,000 harvesters in 1905. The name "Sunshine" was given to the harvester, and the "Sun" prefix was to appear on all other implements produced by the company as it diversified its production interests. In 1902 severe drought reduced machinery sales and left 2,000 harvesters unsold. McKay was forced to look to export markets to dispose of his surplus machines. By 1914 a total of 10,000 machines were being exported annually. During the First World War McKay was appointed to the Business Board of the Defence Department. Increases in the scale of production resulted in the company moving to Melbourne, where it was close to the port of entry of raw materials and was able to export the finished article more readily. In 1909 McKay produced one of the first gas-engined harvesters, but its cost prevented it from being more than an experimental prototype. By this time McKay was the largest agricultural machinery manufacturer in the Southern hemisphere, producing a wide range of implements, including binders. In 1916 McKay hired Headlie Taylor, who had developed a machine capable of harvesting fallen crops. The jointly developed machine was a major success, coming as it did in what would otherwise have been a disastrous Australian harvest. Further developments included the "Sun Auto-header" in 1923, the first of the harvesting machines to adopt the "T" configuration to be seen on modern harvesters. The Australian market was expanding fast and a keen rivalry developed between McKay and Massey Harris. Confronted by the tariff regulations with which the Australian Government had protected its indigenous machinery industry since 1906, Massey Harris sold all its Australian assets to the H.V. McKay company in 1930. Twenty-three years later Massey Ferguson acquired the old Sunshine works and was still operating from there in the 1990s.

Despite a long-running history of wage disputes with his workforce, McKay established a retiring fund as well as a self-help fund for distressed cases. Before his death he created a charitable trust and requested that some funds should be made available for the "aerial experiments" which were to lead to the establishment of the Flying Doctor Service.

[br]

SUBJECT AREA: Photography, film and optics

[br]

[br]

[br]

The son of a Wesleyan minister, Mees was interested in chemistry from an early age and studied at St Dunstan's College in Catford, where he met Samuel E.Sheppard, with whom he went on to University College London in 1900. They worked together on a thesis for BSc degrees in 1903, developing the work begun by Hurter and Driffield on photographic sensitometry. This and other research papers were published in 1907 in the book Investigations on the Theory of the Photographic Process, which became a standard reference work. After obtaining a doctorate in 1906, Mees joined the firm of Wratten \& Wainwright (see F.C.L.Wratten), manufacturers of dry plates in Croydon; he started work on 1 April 1906, first tackling the problem of manufacturing colour-sensitive emulsions and enabling the company to market the first fully panchromatic plates from the end of that year.

During the next few years Mees ran the commercial operation of the company as Managing Director and carried out research into new products, including filters for use with the new emulsions. In January 1912 he was visited by George Eastman, the American photographic manufacturer, who asked him to go to Rochester, New York, and set up a photographic research laboratory in the Kodak factory there. Wratten was prepared to release Mees on condition that Eastman bought the company; thus, Wratten and Wainwright became part of Kodak Ltd, and Mees left for America. He supervised the construction of a building in the heart of Kodak Park, and the building was fully equipped not only as a research laboratory, but also with facilities for coating and packing sensitized materials. It also had the most comprehensive library of photographic books in the world. Work at the laboratory started at the beginning of 1913, with a staff of twenty recruited from America and England, including Mees's collaborator of earlier years, Sheppard. Under Mees's direction there flowed from the Kodak research Laboratory a constant stream of discoveries, many of them leading to new products. Among these were the 16 mm amateur film-making system launched in 1923; the first amateur colour-movie system, Kodacolor, in 1928; and 8 mm home movies, in 1932. His support for the young experimenters Mannes and Godowsky, who were working on colour photography, led to their joining the Research Laboratory and to the introduction of the first multi-layer colour film, Kodachrome, in 1935. Eastman had agreed from the beginning that as much of the laboratory's work as possible should be published, and Mees himself wrote prolifically, publishing over 200 articles and ten books. While he made significant contributions to the understanding of the photographic process, particularly through his early research, it is his creation and organization of the Kodak Research Laboratory that is his lasting memorial. His interests were many and varied, including Egyptology, astronomy, marine biology and history. He was a Fellow of the Royal Society.

[br]

SUBJECT AREA: Chemical technology, Synthetic materials, Textiles

[br]

[br]

[br]

He early showed an aptitude for chemistry and in 1853 entered the Royal College of Chemistry as a student under A.W.von Hofmann, the first Professor at the College. By the end of his first year, he had carried out his first piece of chemical research, on the action of cyanogen chloride on phenylamine, which he published in the Journal of the Chemical Society (1857). He became honorary assistant to von Hofmann in 1857; three years previously he had set up his own chemical laboratory at home, where he had discovered the first of the azo dyes, aminoazonapththalene. In 1856 Perkin began work on the synthesis of quinine by oxidizing a salt of allyl toluidine with potassium dichromate. Substituting aniline, he obtained a dark-coloured precipitate which proved to possess dyeing properties: Perkin had discovered the first aniline dye. Upon receiving favourable reports on the new material from manufacturers of dyestuffs, especially Pullars of Perth, Perkin resigned from the College and turned to the commercial exploitation of his discovery. This proved highly successful. From 1858, the dye was manufactured at his Greenford Green works as "Aniline Purple" or "Tyrian Purple". It was later to be referred to by the French as mauve. Perkin's discovery led to the development of the modern dyestuffs industry, supplanting dyes from the traditional vegetable sources. In 1869, he introduced two new methods for making the red dye alizarin, in place of the process that involved the use of the madder plant (Rubia tinctorum). In spite of German competition, he dominated the British market until the end of 1873. After eighteen years in chemical industry, Perkin retired and devoted himself entirely to the pure chemical research which he had been pursuing since the 1850s. He eventually contributed ninety papers to the Chemical Society and further papers to other bodies, including the Royal Society. For example, in 1867 he published his synthesis of unsaturated organic acids, known as "Perkin's synthesis". Other papers followed, on the structure of "Aniline Purple". In 1881 Perkin drew attention to the magnetic-rotatory power of some of the substances he had been dealing with. From then on, he devoted particular attention to the application of this phenomenon to the determination of chemical structure.

Perkin won wide recognition for his discoveries and other contributions to chemistry.

The half-centenary of his great discovery was celebrated in July 1906 and later that year he received a knighthood.

[br]

SUBJECT AREA: Agricultural and food technology

[br]

[br]

[br]

John Ridley was a preacher in his youth, and then became a mill owner before migrating to Australia with his wife and daughters in 1839. Intending to continue his business in the new colony, he took with him a "Grasshopper" overbeam steam-engine made by James Watt, together with milling equipment. Cereal acreages were insufficient for the steam power he had available, and he expanded into saw milling as well as farming 300 acres. Aware of the Adelaide trials of reaping machines, he eventually built a prototype using the same principles as those developed by Wrathall Bull. After a successful trial in 1843 Ridley began the patent procedure in England, although he never completed the project. The agricultural press was highly enthusiastic about his machine, but when trials took place in 1855 the award went to a rival. The development of the stripper enabled a spectacular increase in the cereal acreage planted over the next decade. Ridley left Australia in 1853 and returned to England. He built a number of machines to his design in Leeds; however, these failed to perform in the much damper English climate. All of the machines were exported to South America, anticipating a substantial market to be exploited by Australian manufacturers.

[br]

SUBJECT AREA: Aerospace, Electricity, Land transport, Ports and shipping

[br]

[br]

[br]

Sperry was born into a farming community in Cortland County. He received a rudimentary education at the local school, but an interest in mechanical devices was aroused by the agricultural machinery he saw around him. His attendance at the Normal School in Cortland provided a useful theoretical background to his practical knowledge. He emerged in 1880 with an urge to pursue invention in electrical engineering, then a new and growing branch of technology. Within two years he was able to patent and demonstrate his arc lighting system, complete with its own generator, incorporating new methods of regulating its output. The Sperry Electric Light, Motor and Car Brake Company was set up to make and market the system, but it was difficult to keep pace with electric-lighting developments such as the incandescent lamp and alternating current, and the company ceased in 1887 and was replaced by the Sperry Electric Company, which itself was taken over by the General Electric Company.

In the 1890s Sperry made useful inventions in electric mining machinery and then in electric street-or tramcars, with his patent electric brake and control system. The patents for the brake were important enough to be bought by General Electric. From 1894 to 1900 he was manufacturing electric motor cars of his own design, and in 1900 he set up a laboratory in Washington, where he pursued various electrochemical processes.

In 1896 he began to work on the practical application of the principle of the gyroscope, where Sperry achieved his most notable inventions, the first of which was the gyrostabilizer for ships. The relatively narrow-hulled steamship rolled badly in heavy seas and in 1904 Ernst Otto Schuck, a German naval engineer, and Louis Brennan in England began experiments to correct this; their work stimulated Sperry to develop his own device. In 1908 he patented the active gyrostabilizer, which acted to correct a ship's roll as soon as it started. Three years later the US Navy agreed to try it on a destroyer, the USS Worden. The successful trials of the following year led to widespread adoption. Meanwhile, in 1910, Sperry set up the Sperry Gyroscope Company to extend the application to commercial shipping.

At the same time, Sperry was working to apply the gyroscope principle to the ship's compass. The magnetic compass had worked well in wooden ships, but iron hulls and electrical machinery confused it. The great powers' race to build up their navies instigated an urgent search for a solution. In Germany, Anschütz-Kämpfe (1872–1931) in 1903 tested a form of gyrocompass and was encouraged by the authorities to demonstrate the device on the German flagship, the Deutschland. Its success led Sperry to develop his own version: fortunately for him, the US Navy preferred a home-grown product to a German one and gave Sperry all the backing he needed. A successful trial on a destroyer led to widespread acceptance in the US Navy, and Sperry was soon receiving orders from the British Admiralty and the Russian Navy.

In the rapidly developing field of aeronautics, automatic stabilization was becoming an urgent need. In 1912 Sperry began work on a gyrostabilizer for aircraft. Two years later he was able to stage a spectacular demonstration of such a device at an air show near Paris.

Sperry continued research, development and promotion in military and aviation technology almost to the last. In 1926 he sold the Sperry Gyroscope Company to enable him to devote more time to invention.

[br]

SUBJECT AREA: Horology

[br]

[br]

[br]

Little is known about Tompion's early life except that he was born into a family of blacksmiths. When he was admitted into the Clockmakers' Company in 1671 he was described as a "Great Clockmaker", which meant a maker of turret clocks, and as these clocks were made of wrought iron they would have required blacksmithing skills. Despite this background, he also rapidly established his reputation as a watchmaker. In 1674 he moved to premises in Water Lane at the sign of "The Dial and Three Crowns", where his business prospered and he remained for the rest of his life. Assisted by journeymen and up to eleven apprentices at any one time, the output from his workshop was prodigious, amounting to over 5,000 watches and 600 clocks. In his lifetime he was famous for his watches, as these figures suggest, but although they are of high quality they do not differ markedly from those produced by other London watchmakers of that period. He is now known more for the limited number of elaborate clocks that he produced, such as the equation clock and the spring-driven clock of a year's duration, which he made for William III. Around 1711 he took into partnership his nephew by marriage, George Graham, who carried on the business after his death.

Although Tompion does not seem to have been particularly innovative, he lived at a time when great advances were being made in horology, which his consummate skill as a craftsman enabled him to exploit. In this he was greatly assisted by his association with Robert Hooke, for whom Tompion constructed a watch with a balance spring in 1675; at that time Hooke was trying to establish his priority over Huygens for this invention. Although this particular watch was not successful, it made Tompion aware of the potential of the balance spring and he became the first person in England to apply Huygens's spiral spring to the balance of a watch. Although Thuret had constructed such a watch somewhat earlier in France, the superior quality of Tompion's wheel work, assisted by Hooke's wheel-cutting engine, enabled him to dominate the market. The anchor escapement (which reduced the amplitude of the pendulum's swing) was first applied to clocks around this time and produced further improvements in accuracy which Tompion and other makers were able to utilize. However, the anchor escapement, like the verge escapement, produced recoil (the clock was momentarily driven in reverse). Tompion was involved in attempts to overcome this defect with the introduction of the dead-beat escapement for clocks and the horizontal escapement for watches. Neither was successful, but they were both perfected later by George Graham.

[br]

SUBJECT AREA: Aerospace

[br]

[br]

[br]

Gabriel Voisin was one of a group of aviation pioneers working in France c. 1905. One of the leaders of this group was a rich lawyer-sportsman, Ernest Archdeacon. For a number of years they had been building gliders based on those of the Wright brothers. Archdeacon's glider of 1904 was flown by Voisin, who went on to assist in the design and manufacture of gliders for Archdeacon and Louis Blériot, including successful float-gliders. Gabriel Voisin was joined by his brother Charles in 1905 and they set up the first commercial aircraft factory. As the Voisins had limited funds, they had to seek customers who could afford to indulge in the fashionable hobby of flying. One was Santos- Dumont, who commissioned Voisin to build his "14 bis" aeroplane in 1906.

Early in 1907 the Voisins built their first powered aeroplane, but it was not a success.

Later that year they completed a biplane for a Paris sculptor, Léon Delagrange, and another for Henri Farman. The basic Voisin was a biplane with the engine behind the pilot and a "pusher" propeller. Pitching was controlled by biplane elevators forward of the pilot and rudders were fitted to the box kite tail, but there was no control of roll.

Improvements were gradually introduced by the Voisins and their customers, such as Farman. Incidentally, to flatter their clients the Voisins often named the aircraft after them, thus causing some confusion to historians. Many Voisins were built up until 1910, when the company's fortunes sank. Competition was growing, the factory was flooded, and Charles left. Gabriel started again, building robust biplanes of steel construction. Voisin bombers were widely used during the First World War, and a subsidiary factory was built in Russia.

In August 1917, Voisin sold his business when the French Air Ministry decided that Voisin aeroplanes were obsolete and that the factory should be turned over to the building of engines. After the war he started another business making prefabricated houses, and then turned to manufacturing motor cars. From 1919 to 1939 his company produced various models, mainly for the luxury end of the market but also including a few sports and racing cars. In the early 1950s he designed a small two-seater, which was built by the Biscuter company in Spain. The Voisin company finally closed in 1958.

[br]

SUBJECT AREA: Ports and shipping

[br]

[br]

[br]

Following early education at Devonport, White passed the Royal Dockyard entry examination in 1859 to commence a seven-year shipwright apprenticeship. However, he was destined for greater achievements and in 1863 passed the Admiralty Scholarship examinations, which enabled him to study at the Royal School of Naval Architecture at South Kensington, London. He graduated in 1867 with high honours and was posted to the Admiralty Constructive Department. Promotion came swiftly, with appointment to Assistant Constructor in 1875 and Chief Constructor in 1881.

In 1883 he left the Admiralty and joined the Tyneside shipyard of Sir W.G. Armstrong, Mitchell \& Co. at a salary of about treble that of a Chief Constructor, with, in addition, a production bonus based on tonnage produced! At the Elswick Shipyard he became responsible for the organization and direction of shipbuilding activities, and during his relatively short period there enhanced the name of the shipyard in the warship export market. It is assumed that White did not settle easily in the North East of England, and in 1885, following negotiations with the Admiralty, he was released from his five-year exclusive contract and returned to public service as Director of Naval Construction and Assistant Controller of the Royal Navy. (As part of the settlement the Admiralty released Philip Watts to replace White, and in later years Watts was also to move from that same shipyard and become White's successor as Director of Naval Construction.) For seventeen momentous years White had technical control of ship production for the Royal Navy. The rapid building of warships commenced after the passing of the Naval Defence Act of 1889, which authorized directly and indirectly the construction of around seventy vessels. The total number of ships built during the White era amounted to 43 battleships, 128 cruisers of varying size and type, and 74 smaller vessels. While White did not have the stimulation of building a revolutionary capital ship as did his successor, he did have the satisfaction of ensuring that the Royal Navy was equipped with a fleet of all-round capability, and he saw the size, displacement and speed of the ships increase dramatically.

In 1902 he resigned from the Navy because of ill health and assumed several less onerous tasks. During the construction of the Cunard Liner Mauretania on the Tyne, he held directorships with the shipbuilders Swan, Hunter and Wigham Richardson, and also the Parsons Marine Turbine Company. He acted as a consultant to many organizations and had an office in Westminster. It was there that he died in February 1913.

White left a great literary legacy in the form of his esteemed Manual of Naval Architecture, first published in 1877 and reprinted several times since in English, German and other languages. This volume is important not only as a text dealing with first principles but also as an illustration of the problems facing warship designers of the late nineteenth century.

[br]