-
1 НКУ распределения и управления
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Русско-французский словарь нормативно-технической терминологии > НКУ распределения и управления
-
2 защита с сокращенной зоной и разрешающим сигналом
защита с сокращенной зоной и разрешающим сигналом
-
[В.А.Семенов. Англо-русский словарь по релейной защите]
защита с сокращенной зоной и разрешающим сигналом
Система защиты, использующая телеканал связи, обычно состоящая из дистанционных защит с сокращенной зоной, установленных на каждом конце защищаемого участка, в которой сигнал передается в случае, если одна из указанных защит обнаружит повреждение. Получение сигнала на другом конце обеспечивает отключение, если местная защита с разрешающим сигналом обнаружила повреждение. См.Рисунок 41.
[Разработка типовых структурных схем микропроцессорных устройств РЗА на объектах ОАО "ФКС ЕЭС". Пояснительная записка. Новосибирск 2006 г.]EN
permissive underreach protection
PUP (abbreviation)
permissive underreaching transfer trip protection (US)
PUTT (US) (abbreviation)
protection, generally distance protection, using telecommunication, with underreach protection at each section end and in which a signal is transmitted when a fault is detected by the underreach protection. Receipt of the signal at the other end initiates tripping if other local permissive protection at the other end has detected the fault
See figure 448-5.
[ IEV ref 448-15-11]FR
protection à portée réduite et à autorisation
protection, en général une protection de distance, à liaison de transmission, avec une protection à portée réduite à chaque extrémité de la section, et dans laquelle un signal est transmis lors de la détection d'un défaut par la protection à portée réduite. A l'autre extrémité, la réception de ce signal commande le déclenchement si une autre protection locale à autorisation a détecté le défaut
Voir figure 448-5.
[ IEV ref 448-15-11]Тематики
EN
DE
- Selektivschutz mit Unterreichweite und Fernauslösung mit Freigabe, m
FR
Русско-французский словарь нормативно-технической терминологии > защита с сокращенной зоной и разрешающим сигналом
-
3 маркированные данные
маркированные данные
Термин, применяемый для обозначения результатов измерений показателей КЭ и результатов объединения измеренных значений показателей на временных интервалах, в пределах которых имели место прерывания, провалы напряжения или перенапряжения.
В настоящем стандарте для обозначения результатов измерений показателей КЭ и результатов объединения измеренных значений в условиях воздействия прерываний, провалов напряжения и перенапряжений вместо термина "сигнализация флагами"
("flagging") в соответствии с [4] применен термин "маркирование".
Примечание. Маркирование данных позволяет принять меры, исключающие учет единственного события более чем один раз для различных показателей КЭ. Маркирование предоставляет дополнительную информацию об измерении или объединении измеренных значений показателей КЭ. Маркированные данные не подлежат удалению из состава хранимых данных. В ряде случаев маркированные данные могут не учитываться при дальнейшем анализе, в других случаях сведения о том, что данные маркированы, могут иметь большое значение. Если в стандартах, устанавливающих нормы КЭ, не изложены правила оценки маркированных данных, порядок их применения устанавливает пользователь СИ, заявитель испытаний или испытательная лаборатория.
[ ГОСТ Р 51317.4.30-2008 (МЭК 61000-4-30:2008)]EN
flagged data
data that has been marked to indicate that its measurement or its aggregation may have been affected by interruptions, dips, or swells
NOTE Flagging enables other methods that may prevent a single event from being counted as several different types of events. Flagging is supplemental information about a measurement or aggregation. Flagged data is not removed from the data set. In some applications, flagged data may be excluded from further analysis but in other applications, the fact that data was flagged may be unimportant. The user, application, regulation, or other standards determine the use of flagged data. See 4.7 for further explanation.
[IEC 61000-4-30, ed. 2.0 (2008-10)]FR
données marquées
données qui ont été marquées pour indiquer que leur mesure ou leur agrégation ont pu être affectées par des interruptions, des creux de tension ou des surtensions temporaires
NOTE Le marquage permet d’autres méthodes qui peuvent éviter qu’un événement simple ne soit compté comme différents types d’événements. Le marquage est une information supplémentaire concernant une mesure ou une agrégation. Une donnée marquée n’est pas enlevée du jeu de données. Dans certaines applications, les données marquées peuvent être exclues par une analyse plus approfondie, mais dans d’autres applications le fait que la donnée soit marquée peut être sans importance. L’utilisateur, l’application, l’autorité de régulation ou d’autres normes déterminent l’utilisation des données marquées. Voir 4.7 pour des explications complémentaires.
[IEC 61000-4-30, ed. 2.0 (2008-10)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > маркированные данные
-
4 нарушение условий конкуренции
нарушение условий конкуренции
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
distortion of competition
Article 85(1) of the EEC Treaty prohibits all agreements between undertakings, decisions by associations of undertakings and concerted practices which may affect trade between member states and which have as their object or effect the prevention, restriction or distortion of competition within the common market. All such arrangements are automatically null and void under Article 85(2), unless exempted by the Commission pursuant to Article 85(3). The text of Article 85 is as follows: "1. The following shall be prohibited as incompatible with the common market: all agreements between undertakings, decisions by associations of undertakings and concerted practices which may affect trade between member states and which have as their object or effect the prevention, restriction or distortion of competition within the common market, and in particular those which: (a) directly or indirectly fix purchase or selling prices or any other trading conditions; (b) limit or control production, markets, technical development, or investment; (c) share markets or sources of supply; (d) apply dissimilar conditions to equivalent transactions with other trading parties, thereby placing them at a competitive disadvantage; (e) make the conclusion of contracts subject to acceptance by the other parties of supplementary obligations which, by their nature or according to commercial usage, have no connection with the subject of such contracts. (Source: CLAORG)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > нарушение условий конкуренции
-
5 ограничение конкуренции
ограничение конкуренции
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
restriction on competition
Article 85(1) of the EEC Treaty prohibits all agreements between undertakings, decisions by associations of undertakings and concerted practices which may affect trade between member states and which have as their object or effect the prevention, restriction or distortion of competition within the common market. All such arrangements are automatically null and void under Article 85(2), unless exempted by the Commission pursuant to Article 85(3). The text of Article 85 is as follows: "1. The following shall be prohibited as incompatible with the common market: all agreements between undertakings, decisions by associations of undertakings and concerted practices which may affect trade between member states and which have as their object or effect the prevention, restriction or distortion of competition within the common market, and in particular those which: (a) directly or indirectly fix purchase or selling prices or any other trading conditions; (b) limit or control production, markets, technical development, or investment; (c) share markets or sources of supply; (d) apply dissimilar conditions to equivalent transactions with other trading parties, thereby placing them at a competitive disadvantage; (e) make the conclusion of contracts subject to acceptance by the other parties of supplementary obligations which, by their nature or according to commercial usage, have no connection with the subject of such contracts. (Source: CLAORG)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > ограничение конкуренции
-
6 распределительное устройство
распределительное устройство
Распределительным устройством (РУ) называется электроустановка, служащая для приема и распределения электроэнергии и содержащая сборные и соединительные шины, коммутационные аппараты, вспомогательные устройства (компрессорные, аккумуляторные и др.), а также устройства защиты, автоматики и измерительные приборы.
[РД 34.20.185-94]
распределительное устройство
Электроустановка, предназначенная для приема и распределения электрической энергии на одном напряжении и содержащая коммутационные аппараты и соединяющие их сборные шины [секции шин], устройства управления и защиты.
Примечание. К устройствам управления относятся аппараты и связывающие их элементы обеспечивающие контроль, измерение, сигнализацию и выполнение команд.
[ ГОСТ 24291-90]
[ ГОСТ Р 53685-2009]
электрическое распределительное устройство
распределительное устройство
Устройство, предназначенное для приема и распределения электроэнергии на одном напряжении и содержащее коммутационные аппараты и соединяющие их сборные соединительные устройства.
Примечание. В состав распределительного устройства дополнительно могут входить устройства защиты и управления
[ОСТ 45.55-99]
распределительное устройство
Электроустановка, служащая для приема и распределения электроэнергии и содержащая коммутационные аппараты, сборные и соединительные шины, вспомогательные устройства (компрессорные, аккумуляторные и др.), а также устройства защиты, автоматики и измерительные приборы.
[ПОТ Р М-016-2001]
[РД 153-34.0-03.150-00]
устройство распределительное
Совокупность аппаратов и приборов для приёма и распределения электроэнергии одного напряжения, вырабатываемой электростанцией или преобразуемой подстанцией
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]EN
switching substation
a substation which includes switchgear and usually busbars, but no power transformers
[IEV number 605-01-02]FR
poste de sectionnement
poste de coupure
poste comprenant des organes de manoeuvre et généralement des jeux de barres, à l'exclusion de transformateurs de puissance
[IEV number 605-01-02]В качестве РУ 6—10 кВ используется сборка высокого напряжения с однополюсными разъединителями и вертикальным расположением фаз одного присоединения и одна камера КСО с выключателем нагрузки и предохранителями для подключения трансформатора. Для РУ 0,4 кВ применяются сборки низкого напряжения с предохранителями и вертикальным расположением фаз одного присоединения.
На ПС применяются открытые (ОРУ), закрытые (ЗРУ) или комплектные (КРУ) распределительные устройства.
[ http://energy-ua.com/elektricheskie-p/klassifikatsiya.html]
В общем случае ПС и РУ являются составной частью электроустановок, которые различаются:
-
по назначению:
- генерирующие,
- преобразовательно-распределительные,
-
потребительские.
Генерирующие электроустановки служат для выработки электроэнергии, преобразовательно-распределительные электроустановки преобразуют электроэнергию в удобный для передачи и потребления вид, передают ее и распределяют между потребителями;
-
по роду тока:
- постоянного тока,
- переменного тока.
-
по напряжению:
- до 1000 В,
- выше 1000 В.
ГОСТ 29322—92 установлена следующая шкала номинальных напряжений:
Шкала номинальных напряжений ограничена сравнительно небольшим числом стандартных значений, благодаря чему изготавливается небольшое число типоразмеров машин и оборудования, а электросети выполняются более экономичными. В установках трехфазного тока номинальным напряжением принято считать напряжение между фазами (междуфазовое напряжение). Согласнодля электросетей переменного тока частотой 50 Гц междуфазовое напряжение должно быть: 12, 24, 36, 42, 127, 220, 380 В; 3, 6, 10, 20, 35, 110, 150, 220, 330, 500, 750 и 1150 кВ;
для электросетей постоянного тока: 12, 24, 36, 48, 60, 110, 220, 440, 660, 825, 3000 В и выше.-
по способу присоединения к электросети ПС разделяются на:
- тупиковые (блочные),
- ответвительные (блочные),
- проходные (транзитные)
- узловые.
Тупиковые ПС получают питание по одной или двум тупиковым ВЛ.
Ответвительные ПС присоединяются ответвлением к одной или двум проходящим ВЛ с односторонним или двухсторонним питанием.
Проходные ПС включаются в рассечку одной или двух проходящих ВЛ с односторонним или двухсторонним питанием.
Узловые ПС кроме питающих имеют отходящие радиальные или транзитные ВЛ.-
по способу управления ПС могут быть:
- только с телесигнализацией,
- телеуправляемыми с телесигнализацией,
- с телесигнализацией и управлением с общеподстанционного пункта управления (ОПУ).
Подстанции оперативно обслуживаются постоянным дежурным персоналом на щите управления, дежурными на дому или оперативно-выездными бригадами (ОВБ). Ремонт ПС осуществляется специализированными выездными бригадами централизованного ремонта или местным персоналом подстанции.
В РУ напряжением до 1000 В провода, шины, аппараты, приборы и конструкции выбирают как по нормальным условиям работы (напряжению и току), так и по термическим и динамическим воздействиям токов коротких замыканий (КЗ) или предельно допустимой отключаемой мощности.
В РУ и ПС напряжением выше 1000 В расстояния между электрооборудованием, аппаратами, токоведущими частями, изоляторами, ограждениями и конструкциями устанавливаются так, чтобы при нормальном режиме работы электроустановки возникающие физические явления (температура нагрева, электрическая дуга, выброс газов, искрение и др.) не могли привести к повреждению оборудования и КЗ.[ http://energy-ua.com/elektricheskie-p/klassifikatsiya.html]
Several different classifications of switchgear can be made:- By the current rating.
-
By interrupting rating (maximum short circuit current that the device can safely interrupt)
- Circuit breakers can open and close on fault currents
- Load-break/Load-make switches can switch normal system load currents
- Isolators may only be operated while the circuit is dead, or the load current is very small.
-
By voltage class:
- Low voltage (less than 1,000 volts AC)
- Medium voltage (1,000–35,000 volts AC)
- High voltage (more than 35,000 volts AC)
-
By insulating medium:
-
By construction type:
- Indoor (further classified by IP (Ingress Protection) class or NEMA enclosure type)
- Outdoor
- Industrial
- Utility
- Marine
- Draw-out elements (removable without many tools)
- Fixed elements (bolted fasteners)
- Live-front
- Dead-front
- Open
- Metal-enclosed
- Metal-clad
- Metal enclosed & Metal clad
- Arc-resistant
-
By IEC degree of internal separation
- No Separation (Form 1)
- Busbars separated from functional units (Form 2a, 2b, 3a, 3b, 4a, 4b)
- Terminals for external conductors separated from busbars (Form 2b, 3b, 4a, 4b)
- Terminals for external conductors separated from functional units but not from each other (Form 3a, 3b)
- Functional units separated from each other (Form 3a, 3b, 4a, 4b)
- Terminals for external conductors separated from each other (Form 4a, 4b)
- Terminals for external conductors separate from their associated functional unit (Form 4b)
-
By interrupting device:
-
By operating method:
- Manually operated
- Motor/stored energy operated
- Solenoid operated
-
By type of current:
-
By application:
-
By purpose
- Isolating switches (disconnectors)
- Load-break switches.
- Grounding (earthing) switches
A single line-up may incorporate several different types of devices, for example, air-insulated bus, vacuum circuit breakers, and manually operated switches may all exist in the same row of cubicles.
Ratings, design, specifications and details of switchgear are set by a multitude of standards. In North America mostly IEEE and ANSI standards are used, much of the rest of the world uses IEC standards, sometimes with local national derivatives or variations.
[Robert W. Smeaton (ed) Switchgear and Control Handbook 3rd Ed., Mc Graw Hill, new York 1997]
[ http://en.wikipedia.org/wiki/High_voltage_switchgear]Тематики
- электрификация, электроснабж. железных дорог
- электроагрегаты генераторные
- электробезопасность
- электроснабжение в целом
Синонимы
EN
- distribution
- energy distribution board
- gear
- switch-gear
- switchboard
- switchgear
- switching substation
- switchyard
DE
FR
Русско-французский словарь нормативно-технической терминологии > распределительное устройство
-
по назначению:
-
7 электрическая нагрузка
1. Любой потребитель электроэнергии
электрическая нагрузка
Любой приемник(потребитель)электрической энергии в электрической цепи 1)
[БЭС]
нагрузка
Устройство, потребляющее мощность
[СТ МЭК 50(151)-78]EN
load (1), noun
device intended to absorb power supplied by another device or an electric power system
[IEV number 151-15-15]FR
charge (1), f
1) Иными словами (электрическая) нагрузка, это любое устройство или группа устройств, потребляющих электрическую энергию (электродвигатель, электролампа, электронагреватель и т. д.)
dispositif destiné à absorber de la puissance fournie par un autre dispositif ou un réseau d'énergie électrique
[IEV number 151-15-15]
[Интент]
Термимн нагрузка удобно использовать как обощающее слово.
В приведенном ниже примере термин нагрузка удачно используется для перевода выражения any other appliance:
Make sure that the power supply and its frequency are adapted to the required electric current of operation, taking into account specific conditions of the location and the current required for any other appliance connected with the same circuit.
Ток, напряжение и частота источника питания должны соответствовать параметрам агрегата с учетом длины и способа прокладки питающей линии, а также с учетом другой нагрузки, подключенной к этой же питающей линии.
[Перевод Интент]
... подключенная к трансформатору нагрузка
[ ГОСТ 12.2.007.4-75*]
Поскольку приемник электрической энергии это любой аппарат, агрегат, механизм, предназначенный для преобразования электрической энергии в другой вид энергии [ПУЭ], то термин нагрузка может характеризовать электроприемник с точки зрения тока, сопротивления или мощности.
2. Потребитель энергоэнергии, с точки зрения потребляемой мощности
нагрузка
Мощность, потребляемая устройством
[СТ МЭК 50(151)-78]EN
load (2), noun
power absorbed by a load
[IEV number 151-15-16]FR
charge (2), f
puissance absorbée par une charge
Source: 151-15-15
[IEV number 151-15-16]
При проектировании электроснабжения энергоемких предприятий следует предусматривать по согласованию с заказчиком и с энергоснабжающей организацией регулирование электрической нагрузки путем отключения или частичной разгрузки крупных электроприемников, допускающих без значительного экономического ущерба для технологического режима перерывы или ограничения в подаче электроэнергии.
[СН 174-75 Инструкция по проектированию электроснабжения промышленных предприятий]
В настоящее время характер коммунально-бытовой нагрузки кардинально изменился в результате широкого распространения новых типов электроприемников (микроволновых печей, кондиционеров, морозильников, люминесцентных светильников, стиральных и посудомоечных машин, персональных компьютеров и др.), потребляющих из питающей сети наряду с активной мощностью (АМ) также и значительную реактивную мощность (РМ).Недопустимые, нерекомендуемые
Тематики
- электроснабжение в целом
- электротехника, основные понятия
Классификация
>>>Близкие понятия
Действия
- аварийное отключение нагрузки
- аварийный сброс нагрузки
- включение нагрузки
- защитное отключение нагрузки
- ограничение допустимых нагрузок
- отключение нагрузки
- отключение неприоритетных нагрузок
- передача нагрузки с одной системы шин на другую
- питание нагрузки
- регулирование электрической нагрузки
Синонимы
Сопутствующие термины
- нагрузки жилых зданий
- нагрузки общественных зданий
- территориальное расположение нагрузок
- ток нагрузки
- токовая нагрузка
- характер коммунально-бытовой наргрузки
- характер нагрузки (индуктивный, емкостной)
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > электрическая нагрузка
-
8 антиводорослевый реагент
антиводорослевый реагент
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
antifouling agent
Agent that inhibits the growth of barnacles and other marine organisms on a ship's bottom (an antifouling paint or other coating). Organo-tin compounds have been the most often used agents in this application since they are effective against both soft and hard fouling organisms. However, in spite of their performance, they have a negative impact on the marine environment and their long half life in the environment, has prompted marine paint manufacturers to look for a nonpersistent alternative. (Source: CED / OLIN)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > антиводорослевый реагент
-
9 библиографическая информационная система
библиографическая информационная система
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
bibliographic information system
A coordinated assemblage of people, devices or other resources organized for the exchange of data pertaining to the history, physical description, comparison, and classification of books and other works. (Source: RHW)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > библиографическая информационная система
-
10 биологические ресурсы суши
биологические ресурсы суши
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
terrestrial biological resource
Any source of supply derived from plants, animals or other wildlife inhabiting land or ground, which may be used by humans for food, clothes and other necessities. (Source: RHW)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > биологические ресурсы суши
-
11 ввод с газовой изоляцией
ввод с газовой изоляцией
Ввод, в котором основной изоляцией является газ (отличающийся от окружающего воздуха) под давлением, большим атмосферного или равным ему.
[ ГОСТ 27744-88]EN
gas-insulated bushing
bushing in which the major insulation consists of gas (other than ambient air) at atmospheric pressure or higher
NOTE 1 This definition includes bushings which are intended to form an integral part of gas-insulated equipment, the gas of the equipment being in communication with that of the bushing.
NOTE 2 A bushing which contains solid insulating materials other than the envelope containing the gas (e.g. support for conducting layers or insulating cylinder), is a combined insulation bushing (see 3.13).
NOTE 3 A bushing in which the desired voltage grading is obtained by an arrangement of conducting or semi-conducting layers incorporated in an insulating material (e.g. plastic film) is referred to as a gas insulated condenser graded bushing.
[IEC 60137, ed. 6.0 (2008-07)]FR
traversée à isolation gazeuse
traversée dont l'isolation principale est assurée par un gaz (autre que l'air ambiant) à une pression supérieure ou égale à la pression atmosphérique
NOTE 1 Cette définition comprend les traversées destinées à faire partie intégrante d'une installation à isolation gazeuse où le gaz de l'installation est en communication avec celui de la traversée.
NOTE 2 Une traversée qui comporte des matériaux isolants solides autres que l'enveloppe contenant le gaz (par exemple un support pour des couches conductrices ou un cylindre isolant) est une traversée à isolation composite (voir 3.13).
NOTE 3 Une traversée dans laquelle la répartition de tension souhaitée est obtenue par la disposition de couches conductrices ou semi-conductrices incorporées au matériau isolant (par exemple film plastique) est désignée par une traversée à isolation gazeuse à répartition capacitive.
[IEC 60137, ed. 6.0 (2008-07)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > ввод с газовой изоляцией
-
12 воздействие быта на окружающую среду
воздействие быта на окружающую среду
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
environmental impact of households
Household impacts on the environment include domestic heating emissions (hot air, carbon dioxide, carbon monoxide, water vapour and oxide of nitrogen, sulphur and other trace gases); domestic sewage consisting of human bodily discharges, water from kitchens, bathrooms and laundries; the dumping of bulky wastes such as old washing machines, refrigerators, cars and other objects that will not fit into the standard dustbin and which are often dumped about the countryside, etc. (Source: WPR / GILP96)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > воздействие быта на окружающую среду
-
13 городское развитие
городское развитие
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
urban development
Any physical extension of, or changes to, the uses of land in metropolitan areas, often involving subdivision into zones; construction or modification of buildings, roads, utilities and other facilities; removal of trees and other obstructions; and population growth and related economic, social and political changes. (Source: CGP / AAG)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > городское развитие
-
14 гостиничная индустрия
гостиничная индустрия
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
hotel industry
The industry related with the provision of lodging and usually meals and other services for travelers and other paying guests. (Source: AMHER)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > гостиничная индустрия
-
15 ДДТ
ДДТ
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
DDT
A persistent organochlorine insecticide, also known as dichlorodiphenyltrichloroethane, that was introduced in the 1940s and used widely because of its persistence (meaning repeated applications were unnecessary), its low toxicity to mammals and its simplicity and cheapness of manufacture. It became dispersed all over the world and, with other organochlorines, had a disruptive effect on species high in food chains, especially on the breeding success of certain predatory birds. DDT is very stable, relatively insoluble in water, but highly soluble in fats. Health effects on humans are not clear, but it is less toxic than related compounds. It is poisonous to other vertebrates, especially fish, and is stored in the fatty tissue of animals as sublethal amounts of the less toxic DDE. Because of its effects on wildlife its use in most countries is now forbidden or strictly limited. (Source: MGH / ALL)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > ДДТ
-
16 заселение видов растений
заселение видов растений
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
introduction of plant species
Plants which have been translocated by human agency into lands or waters where they have not lived previously, at least during historic times. Such translocation of species always involves an element of risk if not of serious danger. Newly arrived species may be highly competitive with or otherwise adversely affect native species and communities. Some may become a nuisance through sheer overabundance. They may become liable to rapid genetic changes in their new environment. Many harmful introductions have been made by persons unqualified to anticipate the often complex ecological interaction which may ensue. On the other hand many plants introduced into modified or degraded environments may be more useful than native species in controlling erosion or in performing other positive functions. (Source: WPR)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > заселение видов растений
-
17 карта-график
карта-график
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
map chart
A map, generally designed for navigation or other particular purposes, in which essential map information is combined with various other data critical to the intended use. (Source: MGH)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > карта-график
-
18 комплектное распределительное устройство в металлической оболочке
- pareillage d’armoire
- appareillage sous enveloppe métallique
- appareillage recouvert de métal
- appareillage à compartiments (avec cloisons non métalliques)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Русско-французский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке
-
19 компоненты системы (кабельных коробов или специальных кабельных коробов)
компоненты системы
Составные части, входящие в систему:
1) прямые секции (lengths of trunking or ducting);
2) фасонные секции, например переходные, тройниковые, крестообразные, угловые, присоединительные, заглушки (trunking or ducting fittings);
3) устройства крепления (fixing devices);
4) детали для установки аппаратов (apparatus mounting devices);
5) другие вспомогательные детали (other accessories).
Примечание
В систему необязательно могут входить все перечисленные компоненты. В каждом отдельном случае могут быть использованы их различные комбинации.
[ ГОСТ Р МЭК 61084-1 2007]
компоненты системы (кабельных коробов или специальных кабельных коробов)
-
[IEV number 442-02-36]EN
system components (of trunking or ducting systems)
parts used within the system which include:
a) Lengths of trunking or ducting
b) Trunking or ducting fittings
c) Fixing devices
d) Apparatus mounting devices
e) Other system accessories
[IEV number 442-02-36]FR
composants d'un système (de goulottes ou de conduits profilés)
éléments utilisés dans le système, qui comprennent:
a) des longueurs de goulottes ou de conduits profilés,
b) des accessoires de goulottes ou de conduits profilés,
c) des dispositifs de fixation,
d) des dispositifs de montage d'appareils,
e) d'autres accessoires du système
[IEV number 442-02-36]Тематики
- изделие электромонтажное
- электропроводка, электромонтаж
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > компоненты системы (кабельных коробов или специальных кабельных коробов)
-
20 контроль за эрозией
контроль за эрозией
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
erosion control
Practices used during construction or other land disturbing activities to reduce or prevent soil erosion. Typical practices include planting of trees and quick growing grass on disturbed areas and other means to slow the movement of water across a disturbed site and trap the soil that does get transported by runoff. (Source: YORK)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > контроль за эрозией
См. также в других словарях:
Other — Oth er, pron. & a. [AS. [=o][eth]er; akin to OS. [=a][eth]ar, [=o][eth]ar, D. & G. ander, OHG. andar, Icel. annarr, Sw. annan, Dan. anden, Goth. an[thorn]ar, Skr. antara: cf. L. alter; all orig. comparatives: cf. Skr. anya other. [root]180. Cf.… … The Collaborative International Dictionary of English
other — O.E. oþer the second, one of the two, other, from P.Gmc. *antharaz (Cf. O.S. athar, O.N. annarr, Ger. ander, Goth. anþar other ), from PIE *an tero , variant of *al tero the other of two (Cf. Lith. antras, Skt. antarah oth … Etymology dictionary
Other — Oth er ([u^][th] [ e]r), conj. [See {Or}.] Either; used with other or or for its correlative (as either . . . or are now used). [Obs.] [1913 Webster] Other of chalk, other of glass. Chaucer. [1913 Webster] … The Collaborative International Dictionary of English
Other — Oth er ([u^][th] [ e]r), adv. Otherwise. It shall none other be. Chaucer. If you think other. Shak. [1913 Webster] … The Collaborative International Dictionary of English
other — UK US /ˈʌðər/ adjective ► ACCOUNTING used to describe amounts of money, usually small amounts, that are added together and not listed under a separate name in financial records: »These expenses are included under the headings utilities , taxes ,… … Financial and business terms
other — index additional, alter ego, ancillary (auxiliary) Burton s Legal Thesaurus. William C. Burton. 2006 … Law dictionary
Other — For other uses, see Other (disambiguation). The Other or Constitutive Other (also the verb othering) is a key concept in continental philosophy; it opposes the Same. The Other refers, or attempts to refer, to that which is Other than the initial… … Wikipedia
other — oth|er W1S1 [ˈʌðə US ˈʌðər] determiner, adj, pron ▬▬▬▬▬▬▬ 1¦(the second of two)¦ 2¦(the rest)¦ 3¦(additional)¦ 4¦(different)¦ 5¦(opposite)¦ 6 other than 7 none other than somebody 8 the other way around/round 9 the other day/morning/week etc … Dictionary of contemporary English
other — [[t]ʌ̱ðə(r)[/t]] ♦ others (When other follows the determiner an, it is written as one word: see another.) 1) ADJ: det ADJ, ADJ n You use other to refer to an additional thing or person of the same type as one that has been mentioned or is known… … English dictionary
other — oth|er [ ʌðər ] function word *** Other can be used in the following ways: as a determiner (followed by a plural noun): He doesn t like other people interfering. (after the or a possessive word and followed by a singular or plural noun): the… … Usage of the words and phrases in modern English
other — determiner, adjective, pronoun 1 used when there are two people, things etc to mean the one that is not being used, the one that you do not already have etc: the other: She was driving the car with one hand and wiping the window with the other. | … Longman dictionary of contemporary English