material+loss

The extra positive and negative charges could compensate each other.

The two trays are independently mounted and the movement of each is opposed to the other to cancel out the forces set up by each tray.

To compensate for the loss of steam,...

This pump immediately adjusts its stroke to compensate for any variation in line pressure.

Voltage drop is compensated by a resistor.

This effect could be counterbalanced by using more material.

The valve supplies fluid to make up for external losses.

Blending sand had to be added to make up for a deficiency in fines.

The saving of steel might offset the high fabrication costs.

The moisture brought in with the air would be offset by the reduction in moisture diffusion.

This material will stand the operating conditions.

The metal forming the hydride should hold up under many cycles of charging and discharging.

Pure quicklime sustains a temperature of about 2900 К without decomposition.

These objects must stand up to tremendous impact forces.

These materials can tolerate (or endure, or stand up to) high heat and rough handling.

Joints made with these electrodes will withstand bending and stretching operations satisfactorily.

The material withstands temperatures up to 1260°C without loss of properties.

Weights up to 500 Ib can be supported on the worktable.

In an automotive environment, semiconductor chips have to contend with temperatures from -40° to 125°C, high humidity, salt and oil sprays, and vibration.

Titanium carbide will tolerate (or withstand) wide variations in cutting speed.

The amplifiers survived the shock very well.

The solution was allowed (or left) to stand for 9 hours.

The catalyst was conditioned for 16 hours under a high vacuum.

The solution was "aged" for 24hr by standing at room temperature.

The furnace temperature was lowered and the specimens were held at 850°C for three days for the terminal etching of the grain boundaries.

The process is accomplished by heating the metal to a high temperature, holding it at this temperature until...

To season wood...

This material will stand the operating conditions.

The metal forming the hydride should hold up under many cycles of charging and discharging.

Pure quicklime sustains a temperature of about 2900 К without decomposition.

These objects must stand up to tremendous impact forces.

These materials can tolerate (or endure, or stand up to) high heat and rough handling.

Joints made with these electrodes will withstand bending and stretching operations satisfactorily.

The material withstands temperatures up to 1260°C without loss of properties.

Weights up to 500 Ib can be supported on the worktable.

In an automotive environment, semiconductor chips have to contend with temperatures from -40° to 125°C, high humidity, salt and oil sprays, and vibration.

Titanium carbide will tolerate (or withstand) wide variations in cutting speed.

The amplifiers survived the shock very well.

The solution was allowed (or left) to stand for 9 hours.

The catalyst was conditioned for 16 hours under a high vacuum.

The solution was "aged" for 24hr by standing at room temperature.

The furnace temperature was lowered and the specimens were held at 850°C for three days for the terminal etching of the grain boundaries.

The process is accomplished by heating the metal to a high temperature, holding it at this temperature until...

To season wood...

In all modern furnaces a double bell and a hopper are used to conserve the large volume of gas which...

The angular momentum of this star would be conserved until the final stages of collapse.

This material maintains low loss characteristics throughout the entire spectrum.

The liquid metal retains (or preserves) its silver colour.

The material retains its properties over a wide temperature range.

The extra positive and negative charges could compensate each other.

The two trays are independently mounted and the movement of each is opposed to the other to cancel out the forces set up by each tray.

To compensate for the loss of steam,...

This pump immediately adjusts its stroke to compensate for any variation in line pressure.

Voltage drop is compensated by a resistor.

This effect could be counterbalanced by using more material.

The valve supplies fluid to make up for external losses.

Blending sand had to be added to make up for a deficiency in fines.

The saving of steel might offset the high fabrication costs.

The moisture brought in with the air would be offset by the reduction in moisture diffusion.

We ignore polarization effects altogether.

Copper loss is converted entirely into heat.

The system is totally dependent on a coding device.

This investment will amply (or fully, or completely) repay itself.

It was necessary to replace the entire bottom of the tank (or completely replace the bottom...).

These parts are made of uniform material throughout.

A fully parallel computing system...

The background may obscure some lines altogether.

I (α, φ)₂₀₀ is the intensity of the 200 reflection at a given α and φ.

The engine develops 340 hp at 1900 rpm.

For a given centre distance, the length of a crossed belt will be a constant.

In starting up, the starter should be set at...

Certain precautions must be taken to obtain satisfactory results in using this equipment.

On ignition the ingredients must vaporize.

On interruption of the electric current the valve closes instantly.

The temperature is read (up)on entering and leaving the water jacket.

Bentonite shrinks upon drying.

When added to aluminium, germanium produces a better hardening effect than silicon.

When employing these compounds as fuel additives, we...

When tuning a system for optimum performance one must...

With an overall length of 18 ft the machine weighs 15 tons.

The compressor operates with one suction valve open.

Both shot core drilling and rotary drilling methods are used in shaft drilling.

Given comparable costs for raw materials, the manufacturing cost is determined largely by the weight of the component.

The breakdown of bias voltage decreases by a few tenths of a millivolt for every °C increase in temperature.

With the proper combination of resistors and capacitors, the voltage will be...

With (or In) this method, the amount of material to be removed can be closely controlled.

Given the extraordinary resolution of the Space Telescope, it is possible to detect...

The conductance increases linearly with the addition of H⁺.

The lower inertia of the cone clutch elements permits rapid reversal with low energy loss.

In moving through the tube the atoms collide with...

The potential energy is taken as zero for (or as, or with, or when) a → ∞,...

The equation is useful comparing diffusion currents from electrodes with different capillary characteristics.

Neutron stars are apparently born the explosions of supernovas.

Such a function is real for real z.

Weathering manifests itself as a reduction of the material to...

This form of narrow saturation resonance manifests itself in the output signal of a gas laser.

Temporal arthritis occasionally presents with localizing neurological signs (мед.).

This neoplasm may present as weight loss.

This activity is often manifested in the production of cosmic jets.

Such deviations show as a curvature of the calibration graph.

Autonomic neuropathy is most usually evident as postural hypotension and...