-
1 manner of manufacture
Патенты: вид производства, вид производства (согласно английскому патентному праву включает способы изготовления, машины, изделия) -
2 manner of manufacture
вид производства (согласно английскому патентному праву включает способы изготовления, машины, изделия) -
3 manner
-
4 make
делать имя существительное:фасон (style, fashion, model, make)глагол:смастерить (make, improvise)учинять (make, commit) -
5 assembly manufacturer
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
сборщик НКУ
Организация, ответственная за сборку НКУ.
Примечание. Разработчик и сборщик НКУ могут быть разными организациями.
[ ГОСТ Р МЭК 61439-1-2012]EN
assembly manufacturer
organization taking the responsibility for the completed assembly
NOTE The assembly manufacturer may be a different organisation to the original manufacturer.
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d’ensembles
organisme prenant la responsabilité de l’ensemble fini
NOTE Le constructeur d’ensembles peut être un organisme différent du constructeur d'origine.
[IEC 61439-1, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
EN
FR
- constructeur d’ensembles
Англо-русский словарь нормативно-технической терминологии > assembly manufacturer
-
6 introduce
1. III1) introduce smth. introduce a rule (a new method, a new fashion, a system, a useful technique, an improvement, etc.) вводить правило и т. д., introduce a new theory (an idea) предложить /выдвинуть/ новую теорию (идею); introduce a quotation (figures, facts, etc.) приводить /использовать/ цитату и т. д.; who introduced that law? кто предложил установить /ввести/ этот закон?; the announcer introduces each programme каждую программу объявляет диктор; relative pronouns introduce adjective clauses относительные местоимения вводят придаточные определительные2) introduce smth. introduce a problem (a subject of discussion, a question, an item, etc.) выносить /выдвигать, ставить/ на обсуждение проблему и т. д., introduce a bill вносить законопроект3) introduce smb. introduce strangers (two friends, one's brother, some countrymen of mine, etc.) представить друг другу незнакомых людей и т. д.; introduce oneself представиться, назвать себя; may I introduce Mr. Brown разрешите мне представить мистера Брауна2. IVintroduce smth. in some manner I'll introduce the subject briefly я кратко ознакомлю вас с темой /с вопросом/3. XI1) be introduced into smth. vaccination for smallpox was first introduced into the United States by Dr. William Yates прививки против оспы были впервые применены в США доктором Уильямом Йетсом; tobacco (this plant, this species, etc.) was first introduced into Europe from America табак и т. д. был завезен в Европу из Америки; porcelain manufacture was introduced into Japan from China about 1513 производство фарфора пришло в Японию из Китая приблизительно в тысяча пятьсот тринадцатом году; be introduced to smb., smth. since the dictionary was first introduced to the public с тех пор, как широкие круги читателей впервые познакомились с этим словарем; I was introduced to chess at an early age я начал играть в шахматы в раннем детстве; be introduced as smth. the word was originally introduced as a term of reproach первоначально это слово вошло в употребление как выражение упрека2) be introduced in /at/ smth. the bill will be introduced in /at/ the next session законопроект будет вынесен на обсуждение на следующей сессии3) be introduced to smb. I should like to be introduced to her мне бы хотелось, чтобы меня с ней познакомили; be introduced In smth. are you the gentleman introduced in this letter? это о вас пишут в этом письме?4. XXI11) introduce smth. in (to) smth. introduce a new method into porcelain manufacture (new ideas into business, something new in painting, etc.) вводить /внедрять/ новые методы в производство фарфора и т. д., introduce songs and dances into the programme (some music into a play, phonetics into the list of subjects to be studied, a story into the conversation, etc.) включать / вставлять, вводить/ в программу песни и танцы и т. д.; he introduced this subject into the conversation это он заговорил об этом /на эту тему/; introduce a note of humour into the conversation (a romantic situation into a novel, a touch of irony into the play, a touch of colour into a room, etc.) (привносить нотку юмора в разговор и т.д., introduce smth. with smth. introduce a speech with an amusing anecdote (a subject with a short preface, a concert with a short speech, etc.) предварять доклад забавным рассказом и т. д., introduce smb. into smth. introduce smb. into society (into the world, into one's family, etc.) вводить кого-л. в общество и т. д.2) introduce smth. (in)to (for) smth. introduce a bill into /before/ Parliament поставить /выдвинуть/ законопроект на обсуждение в парламенте; introduce a question for debate предложить вопрос /тему/ для дискуссии3) introduce smb. to smb. introduce them to all our friends (his two sisters to us, the stranger to his family, etc.) познакомить их со всеми нашими друзьями и т. д.; allow me to introduce my friend to you позвольте представить вам моего друга; introduce oneself to her parents представиться ее родителям; introduce the speaker to the meeting (the lecturer to the audience, the actor to the public, etc.) представить докладчика собранию и т. д.; introduce smb. to smth. introduce smb. to the process (to our customs, to skiing, to the city by showing the sights, to the intricacies of Euclid, to a strange mode of life, to Japanese poetry, etc.) (познакомить кого-л. с этим процессом и т. д.4) introduce smb. into smth. introduce smb. into a room (into a house, into a place, etc.) ввести /провести, привести/ кого-л. в комнату и т. д.; introduce smb. into his presence ввести /провести/ кого-л. к кому-л.; introduce smth. into smth. introduce a tube into a wound (a long tube into the sick man's throat, one's finger into a wound, etc.) вводить трубку в рану и т. д.; introduce a key into a lock вставлять ключ в замок5. XXIV1introduce smb. as smb. introduce her as his daughter (the young man as their new colleague, the woman as the new manager, etc.) представить ее как свою дочь и т. д. -
7 fashion
1. n образ; манера, видafter a fashion — некоторым образом, до некоторой степени, немного, не очень хорошо
he was tall, athletic and after a fashion handsome — это был высокий, атлетически сложённый и по-своему красивый человек
after a fashion — некоторым образом; до известной степени
2. n фасон; покрой; форма3. n модаto be the fashion, to be in fashion — быть в моде
4. n фешенебельное общество, высший светthe restaurant was crowded with men and women of fashion — ресторан был переполнен светской публикой
the great world, the world of fashion — высший свет
5. n фасонный6. n модныйfashion plate — модная картинка; страничка мод
7. v придавать вид, форму; выделывать8. v тех. фасонировать, моделировать9. v редк. приспосабливатьСинонимический ряд:1. bandwagon (noun) bandwagon; chic; craze; cry; dernier cri; fad; furore; model; rage; thing; ton; vogue2. behavior (noun) behavior; behaviour; conformity; conventionality; formality; guise; style; tendency; trend3. convention (noun) convention; custom; tradition4. elite (noun) beau monde; elite; four hundred; haut monde; smart set; society5. form (noun) cast; figure; form; mold; mould; pattern; sculpture; shape6. kind (noun) brand; kind; make; sort; type7. method (noun) approach; manner; method; mode; modus; system; technique; tone; vein; way; wise8. make (verb) assemble; build; construct; contrive; create; design; erect; fabricate; forge; form; frame; make; manufacture; mold; mould; produce; put together; shape9. square (verb) acclimate; acclimatise; accommodate; adapt; adjust; conform; fit; reconcile; square; suit; tailorАнтонимический ряд:dress; eccentricity; idiosyncrasy; individuality; person; speech; work -
8 form
1. n форма; внешний вид; очертаниеnormalized form — нормализованная форма; нормализованный вид
analytic form — аналитическая форма; аналитическое выражение
2. n фигураwell-proportioned form — пропорциональное сложение, хорошая фигура
3. n обличьеProteus was able to appear in the form of any animal — Протей мог являться в обличье любого животного
4. n стать5. n форма, вид6. n вид, разновидность; тип7. n стиль, манераbad form — невоспитанность, вульгарность, плохие манеры
8. n состояние; форма; готовность9. n настроение, душевное состояние10. n формальность; проформа11. n церемония, порядок12. n установившаяся форма выражения; формулаconjuctive normal form — конъюктивная нормальная форма; КНФ
13. n класс14. n форма, бланк, образец; анкета15. n нора16. n грам. форма словаsnap-apart business form — «отрывная» конторская форма
17. n спец. форма исполнения18. n спец. модель, тип, образец; торговый сорт19. n спец. тех. форма для литья20. n спец. полигр. печатная форма21. n спец. стр. форма; опалубка22. n спец. выражение23. v придавать форму, вид24. v принимать форму, вид25. v составлять, образовывать; формировать26. v образовываться; формироваться27. v грам. образовывать28. v создавать, составлять; формулировать29. v возникать, оформляться30. v представлять собой; являтьсяchocolate forms a wholesome substitute for staple food — шоколад является полноценным заменителем основных продуктов питания
31. v тренировать, дисциплинировать; воспитывать; развивать32. v формировать, организовывать; образовывать, создавать33. v воен. строить34. v воен. строиться35. v спец. формовать36. v спец. сад. обрезать, подвергать обрезке; формировать кронузабираться, забиваться в нору
to form and display an intention — сформировать и обнаружить намерение, умысел
Синонимический ряд:1. appearance (noun) appearance; body; build; cast; configuration; conformation; cut; figure; format; framework; matrix; plan; shape; structure; style2. business form (noun) application; blank; business form; document; duplicate; paper; questionnaire; report3. ceremony (noun) ceremonial; ceremony; conformity; formality; liturgy; rite; ritual; rule4. convenance (noun) convenance; convention; usage5. formula (noun) approach; formula; method; mode; practice; procedure; system6. group (noun) assemblage; group; organisation; organization7. kind (noun) arrangement; kind; manner; sort; type8. model (noun) model; mold; mould; pattern9. order (noun) condition; fitness; order; trim10. acquire (verb) acquire; contract; develop11. arrange (verb) arrange; combine; dispose; order; organise; organize; systematise; systematize12. cast (verb) carve; cast; chisel; construct; contrive; design; devise; fashion; frame; mold; pattern13. make (verb) assemble; build; compose; comprise; constitute; create; erect; fabricate; forge; invent; make; make up; manufacture; originate; produce; put together; shape14. model (verb) model; mould; shape15. teach (verb) discipline; educate; instruct; rear; teach; trainАнтонимический ряд:damage; defacement; deform; deformity; demolish; derange; destroy; devastate; disarrange; disintegrate; dislocate; dismantle; dismember -
9 mould
1. n форма; лекало, шаблон2. n метал. литейная форма, изложница, мельда3. n метал. редк. отливка4. n метал. полигр. матрица5. n метал. стр. опалубка для бетона6. n метал. архит. багет; калёвка, профиль; раскладка7. n метал. пудинг или желе, приготовленные в формеinjected into the mould — отлил в форму; отлитый в форму
injected into a mould — отлил в форму; отлитый в форму
8. n метал. характерcast in the same mould — одинаковый ;
9. v отливать в форму, формовать10. v формовать; разделывать11. v делать по шаблону12. v формировать; создавать13. n взрыхлённая земля14. n с. -х. перегной, гумус15. n поэт. уст. земля, почва16. n поэт. диал. могила17. n поэт. уст. прах18. v насыпать землю; засыпать землёй19. n плесень; плесенный грибок20. v покрываться плесенью; плесневеть21. v оставаться без употребленияthese books lie moulding — эти книги лежат без применения, этими книгами не пользуются
Синонимический ряд:1. form (noun) cavity; die; form; matrix; model; pattern; shape2. fungus (noun) decay; fungus; mildew; parasite3. order (noun) breed; cast; caste; character; class; cut; description; distinctive nature; feather; ilk; kind; lot; manner; nature; order; persuasion; sort; species; stamp; stripe; type; variety4. decay (verb) break up; crumble; decay; decompose; mildew; moulder; putrefy; rot; rust; spoil5. form (verb) form; model; shape6. influence (verb) bend; convert; develop; govern; influence; transfigure; transform7. make (verb) assemble; build; construct; fabricate; fashion; forge; form; frame; make; manufacture; model; produce; put together; shape -
10 constructeur d'origine
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
разработчик НКУ
-
[Интент]
разработчик НКУ
Организация, которая выполнила разработку конструкции и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439.1-2012]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
EN
FR
Франко-русский словарь нормативно-технической терминологии > constructeur d'origine
-
11 original equipment manufacturer
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
изготовитель оборудования
Обозначение компаний, производящих оборудование, которое впоследствии выпускается на рынок и продается другим фирмам под их собственными названиями.
[ http://www.alltso.ru/publ/glossarij_setevoe_videonabljudenie_terminy/1-1-0-34]EN
производитель комплектного оборудования
Компания, приобретающая комплектующие изделия одного или нескольких изготовителей и после комплексной сборки (иногда с незначительной доработкой) выпускающая готовую продукцию под своей маркой. Доработка в основном связана с введением вспомогательных аппаратных и программных средств, необходимых для тестирования и отладки OEM-оборудования, а также реализации новых возможностей, обеспечиваемых по заказу потребителя.
[Л.М. Невдяев. Телекоммуникационные технологии. Англо-русский толковый словарь-справочник. Под редакцией Ю.М. Горностаева. Москва, 2002]Тематики
- электросвязь, основные понятия
EN
Англо-русский словарь нормативно-технической терминологии > original equipment manufacturer
-
12 original manufacturer
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
разработчик НКУ
-
[Интент]
разработчик НКУ
Организация, которая выполнила разработку конструкции и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439.1-2012]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
EN
FR
Англо-русский словарь нормативно-технической терминологии > original manufacturer
-
13 panel builder
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
разработчик НКУ
-
[Интент]
разработчик НКУ
Организация, которая выполнила разработку конструкции и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439.1-2012]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
EN
FR
Англо-русский словарь нормативно-технической терминологии > panel builder
-
14 panel-builder
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
Англо-русский словарь нормативно-технической терминологии > panel-builder
-
15 switchboard manufacturer
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
Англо-русский словарь нормативно-технической терминологии > switchboard manufacturer
См. также в других словарях:
manufacture — /mænjəˈfæktʃə / (say manyuh fakchuh), /ˈmænjəfæktʃə / (say manyuhfakchuh) noun 1. the making of goods or wares by manual labour or by machinery, especially on a large scale. 2. the making of anything. 3. the thing or material manufactured. –verb… …
Validation (drug manufacture) — Within the highly regulated environment for development and manufacturing of Pharmaceutical Drugs and medical devices there is a requirement within the regulations to provide an appropriate amount of assurance that critical processes in producing … Wikipedia
National Research Development Corporation v Commissioner of Patents (1959) 102 CLR 252 — The NRDC case has been important in clarifying what is meant by ‘manner of manufacture’ in respects of patent applications. The references to the Patents Act in this case refer to the Australian Patents Act 1952 (Cth) which was later repealed by… … Wikipedia
form — n 1: the structure of something (as a document) as distinguished from its matter a defect in form, not substance 2: established procedure according to rule or practice see also form of action 3: a printed or typed document with blank spaces for… … Law dictionary
fashion — index adapt, build (construct), complexion, compose, conduct, contrive, create, crystallize … Law dictionary
make — I verb accomplish, achieve, actualize, assemble, attain, author, beget, bring about, bring forth, bring into being, bring into existence, bring to effect, bring to pass, build, call into being, call into existence, carry into effect, carry into… … Law dictionary
Prestonpans — PRESTONPANS, a parish, in the county of Haddington; containing, with the villages of Cuthill, Dolphingstone, and Preston, and part of the late quoad sacra parish of Cockenzie, 2234 inhabitants, of whom 1659 are in the town of Prestonpans, 8… … A Topographical dictionary of Scotland
manual — [15] The Latin word for ‘hand’ was manus (it came from an Indo European base *mə n , and its modern descendants include French main, Italian and Spanish mano, and Romanian mîna). It has contributed generously to English vocabulary, and manual… … The Hutchinson dictionary of word origins
manual — [15] The Latin word for ‘hand’ was manus (it came from an Indo European base *mə n , and its modern descendants include French main, Italian and Spanish mano, and Romanian mîna). It has contributed generously to English vocabulary, and manual… … Word origins
cast — Synonyms and related words: Ace bandage, Band Aid, Platonic form, Platonic idea, a thing for, abandon, abdicate, about ship, account, achromatism, acting company, actor, add, address, adhesive tape, aesthetic form, affinity, age group, aggregate … Moby Thesaurus
mold — Synonyms and related words: Ectocarpales, Phaeophyceae, Platonic form, Platonic idea, accommodate, accommodate with, accord, acres, adapt, adapt to, adenovirus, adjust, adjust to, aerobe, aerobic bacteria, aesthetic form, agree with, algae,… … Moby Thesaurus