-
101 metal clad switch gear
- комплектное устройство в металлической оболочке
- комплектное распределительное устройство в металлической оболочке
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
комплектное устройство в металлической оболочке
-EN
metal-enclosed switchgear and controlgear
switchgear and controlgear assemblies with an external metal enclosure intended to be earthed, and complete except for external connections
[IEC 62271-203, ed. 1.0 (2003-11)]FR
appareillage sous enveloppe métallique
appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l'exception des connexions extérieures
[IEC 62271-203, ed. 1.0 (2003-11)]Комплектные устройства в металлической оболочкеТематики
- НКУ (шкафы, пульты,...)
EN
FR
Англо-русский словарь нормативно-технической терминологии > metal clad switch gear
102 metal clad switchgear
- комплектное устройство в металлической оболочке
- комплектное распределительное устройство в металлической оболочке
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
комплектное устройство в металлической оболочке
-EN
metal-enclosed switchgear and controlgear
switchgear and controlgear assemblies with an external metal enclosure intended to be earthed, and complete except for external connections
[IEC 62271-203, ed. 1.0 (2003-11)]FR
appareillage sous enveloppe métallique
appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l'exception des connexions extérieures
[IEC 62271-203, ed. 1.0 (2003-11)]Комплектные устройства в металлической оболочкеТематики
- НКУ (шкафы, пульты,...)
EN
FR
Англо-русский словарь нормативно-технической терминологии > metal clad switchgear
103 metal-enclosed switchgear
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Англо-русский словарь нормативно-технической терминологии > metal-enclosed switchgear
104 metalclad switch gear
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Англо-русский словарь нормативно-технической терминологии > metalclad switch gear
105 metalclad switchgear
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Англо-русский словарь нормативно-технической терминологии > metalclad switchgear
106 przegród|ka
f dim. 1. (ścianka przedzielająca) compartment, division- szuflada z sześcioma przegródkami a drawer with six compartments a. dividers- przegródki na sztućce cutlery divisions2. (miejsce oddzielone) compartment; (w biurku, szafce) pigeonhole- portfel z przegródkami na banknoty i karty kredytowe a wallet with compartments for notes and credit cards- znalazłem liścik w mojej przegródce I found a note in my pigeonhole- walizka miała wiele przegródek the suitcase had many compartmentsThe New English-Polish, Polish-English Kościuszko foundation dictionary > przegród|ka
107 compartment
[kəmˈpɑ:tmənt]cargo compartment ав. грузовой отсек compartment отделение; купе; watertight compartment мор. водонепроницаемый отсек; to live in watertight compartments разг. жить совершенно изолированно от людей compartment отделение; купе; watertight compartment мор. водонепроницаемый отсек; to live in watertight compartments разг. жить совершенно изолированно от людей luggage compartment багажное отделение compartment отделение; купе; watertight compartment мор. водонепроницаемый отсек; to live in watertight compartments разг. жить совершенно изолированно от людей108 structure de enveloppe
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Франко-русский словарь нормативно-технической терминологии > structure de enveloppe
109 structure de l'armoire
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Франко-русский словарь нормативно-технической терминологии > structure de l'armoire
110 каркас НКУ
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Русско-английский словарь нормативно-технической терминологии > каркас НКУ
111 каркас НКУ
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Русско-французский словарь нормативно-технической терминологии > каркас НКУ
112 structure
здание
Наземное сооружение с помещениями для проживания, деятельности людей, хранения сырья или продукции или содержания животных.
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]
здание
Наземное строительное сооружение с помещениями для проживания и (или) деятельности людей, размещения производств, хранения продукции или содержания животных
[ ГОСТ Р 52086-2003]
здание
Строительная система, состоящая из несущих и ограждающих или совмещенных несущих и ограждающих конструкций, образующих наземный замкнутый объем, предназначенный для проживания или пребывания людей в зависимости от функционального назначения и для выполнения различного вида производственных процессов.
[РД 01.120.00-КТН-228-06]
здание
Покрытая крышей конструкция со стенами, в которой энергия применяется для создания определенных условий внутри помещения. В качестве здания может рассматриваться здание целиком или его часть, спроектированная или перестроенная для отдельной эксплуатации.
[ДИРЕКТИВА 2002/91/ЕС ЕВРОПЕЙСКОГО ПАРЛАМЕТА И СОВЕТА от 16 декабря 2002 г. по энергетическим характеристикам зданий]
здание
Результат строительства, представляющий собой объемную строительную систему, имеющую надземную и (или) подземную части, включающую в себя помещения, сети инженерно-технического обеспечения и системы инженерно-технического обеспечения и предназначенную для проживания и (или) деятельности людей, размещения производства, хранения продукции или содержания животных.
[Технический регламент о безопасности зданий и сооружений]
здание
Результат строительства, представляющий собой объемную строительную систему, имеющую надземную и (или) подземную части, включающую в себя помещения, сети и системы инженерно-технического обеспечения и предназначенную для проживания и (или) деятельности людей, размещения производства, хранения продукции или содержания животных [4].
Примечание - Данное определение может относиться к зданию в целом или к отдельным частям здания, которые могут использоваться отдельно.
[ ГОСТ Р 54860-2011]- Промышленные здания
-
Общественные здания
-
учреждения и организации управления, финансирования, кредитования, госстраха, просвещения, дошкольные;
- библиотеки, архивы;
- предприятия торговли, общепита, бытового обслуживания населения;
- гостиницы;
- лечебные учреждения;
- музеи;
- зрелищные предприятия и спортивные сооружения
-
учреждения и организации управления, финансирования, кредитования, госстраха, просвещения, дошкольные;
- Жилые здания
Части здания
1 - фундамент;
2 - цоколь;
3 - поле стены (лицевая поверхность стены);
4 - карниз;
5 - оконный проем;
6 - дверной проем;
7 - простенок;
8 - перемычка (часть стены, перекрывающая оконные или дверные проемы);
9 - междуэтажное перекрытие;
10 - подвал;
11 - подполье;
12 - нижнее перекрытие;
13 - чердачное перекрытие;
14 - балки;
15 - кровля;
16 - стропила;
(15+16) - крыша[Грингауз Ф.И. Слесарь-жестянщик по промышленной вентиляции. Госстройиздат, 1959. 264 стр.]
Тематики
- здания, сооружения, помещения
- магистральный нефтепроводный транспорт
- опалубка
- теплоснабжение зданий
- энергосбережение
EN
DE
FR
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
каркас стационарного котла
каркас
Ндп. котельный каркас
Несущая металлическая конструкция, воспринимающая нагрузку от массы стационарного котла, с учетом временных и особых нагрузок и обеспечивающая требуемое взаимное расположение элементов котла.
[ ГОСТ 23172-78]Недопустимые, нерекомендуемые
Тематики
- котел, водонагреватель
Синонимы
EN
DE
FR
конструкция
Устройство, взаимное расположение частей и состав машины, механизма или сооружения.
[ http://sl3d.ru/o-slovare.html]Параллельные тексты EN-RU
The new valve profile is design to ensure smooth and precise control at low capacities for improved part load performances.
[Lennox]Вентиль новой конструкции обеспечивает плавное и точное регулирование при низкой производительности холодильного контура, что увеличивает его эффективность при неполной нагрузке.
[Интент]
Тематики
EN
мн. здания
сооружения
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
Синонимы
EN
3.38 структура (structure): Порядок следования элементов данных в сообщении.
Источник: ГОСТ Р ИСО 22742-2006: Автоматическая идентификация. Кодирование штриховое. Символы линейного штрихового кода и двумерные символы на упаковке продукции оригинал документа
3.2.32 структура (structure): Набор взаимосвязанных частей какого-либо сложного объекта, а также взаимосвязей между ними;
Источник: ГОСТ Р ИСО 10303-1-99: Системы автоматизации производства и их интеграция. Представление данных об изделии и обмен этими данными. Часть 1. Общие представления и основополагающие принципы оригинал документа
4.43 структура (structure): Отдельное волокно, пучок волокон, сгруппированные волокна или матрица.
Источник: ГОСТ Р ИСО 16000-7-2011: Воздух замкнутых помещений. Часть 7. Отбор проб при определении содержания волокон асбеста оригинал документа
3.13 конструкция (structure): Организованная комбинация соединенных между собой элементов, выполняющих несущие, оградительные либо совмещенные функции.
Источник: ГОСТ Р 54483-2011: Нефтяная и газовая промышленность. Платформы морские для нефтегазодобычи. Общие требования оригинал документа
Англо-русский словарь нормативно-технической терминологии > structure
113 cubicle frame
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Англо-русский словарь нормативно-технической терминологии > cubicle frame
114 cubicle structure
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Англо-русский словарь нормативно-технической терминологии > cubicle structure
115 enclosure frame
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Англо-русский словарь нормативно-технической терминологии > enclosure frame
116 switchgear frame
каркас
Каркас представляет собой часть корпуса НКУ, к которой крепят элементы оболочки (панели, крышку, дверь (или двери).
Несущая часть панели ВРУ, на которой крепятся аппараты функциональных блоков, а также элементы оболочки и внутренние защитные ограждения.
[ ГОСТ Р 51732-2001]
каркас НКУ
-
[Интент]
Каркас может быть:- сборный;
- частично сварной;
- полностью сварной.
Корпус шкафа со сборным каркасом
-
элементы объемного сборного каркаса;
сборный каркас - боковая панель (правая панель);
- дверь;
- цоколь;
- боковая панель (левая панель);
- задняя панель;
-
крышка;
верхняя панель
Параллельные тексты EN-RU
Switchgear frame
The PC3.0/MNS R frame is based on modular 2 mm thick steel C sections, pre-drilled at a pitch of 25 mm DIN.
Each unit is based on modular elements and consists of:
• circuit-breaker compartments;
• instrument compartments;
• busbar compartment;
• cable compartment.
All compartments are mechanically segregated from the others.
[ABB]Каркас НКУ
Каркас PC3.0/MNS R изготовлен из модульного усиленного стального С-образного DIN-профиля толщиной 2 мм с отверстиями, расположенными с шагом 25 мм.
Каждый функциональный блок является модульным и включает в себя:
• отсеки автоматических выключателей;
• отсеки средств контроля, управления и защиты;
• отсек шин;
• кабельный отсек.
Все отсеки разделены перегородками или ограждениями друг от друга.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Англо-русский словарь нормативно-технической терминологии > switchgear frame
117 compartment
1. [kəmʹpɑ:tmənt] n1) ж.-д. купе2) отсекwatertight compartment - мор. водонепроницаемый отсек
compartment of terrain - топ. коридор
3) отделение, ячейка (для чего-л.)the pencil-case has several compartments for holding different things - в пенале есть несколько отделений для разных принадлежностей
2. [kəmʹpɑ:tmənt] v♢
to be /to live/ in watertight compartments - жить, совершенно изолированно от людей1. 1) преим. p. p. разделять на отсеки, ячейки2) класть в отсеки, ячейки2. относить к какой-л. категории; классифицировать118 герметичные помещения
Engineering: leaktight compartments, sealed compartmentsУниверсальный русско-английский словарь > герметичные помещения
119 жить совершенно изолированно от людей
2) Colloquial: live in watertight compartmentsУниверсальный русско-английский словарь > жить совершенно изолированно от людей
120 compartment
(a separate part or division eg of a railway carriage: We couldn't find an empty compartment in the train; The drawer was divided into compartments.) compartimientocompartment n compartimentoin the fridge there's a special compartment for vegetables en la nevera hay un compartimento especial para la verduratr[kəm'pɑːtmənt]1 (in wallet, fridge, desk) compartimento, compartimiento; (in train) departamento, compartimento, compartimientocompartment [kəm'pɑrtmənt] n: compartimento m, compartimiento mn.• compartimiento s.m.• departamento s.m.kəm'pɑːrtmənt, kəm'pɑːtmənta) (of bag, desk, refrigerator) compartimento m, compartimiento m[kǝm'pɑːtmǝnt]N compartimiento m ; (Brit) (Rail) compartimiento m* * *[kəm'pɑːrtmənt, kəm'pɑːtmənt]a) (of bag, desk, refrigerator) compartimento m, compartimiento mСтраницыСм. также в других словарях:
compartments — In the insect wing, for example, there are two compartments, anterior and posterior, each containing several clones, but clones do not cross the boundary. It seems from studies with homeotic mutants that cells in different compartments are… … Dictionary of molecular biology
compartments — com·part·ment || kÉ™m pÉ‘ËtmÉ™nt n. enclosed area (cell, cabin, etc.); division, section … English contemporary dictionary
COMPARTMENTS — … Useful english dictionary
Fascial compartments of leg — Cross section through middle of left leg. (Colours correspond to fascial compartments; red text names muscles in each compartment; grey text names neurovascular structures in each compartment) On the human body, the limbs can be divided into… … Wikipedia
Fascial compartments of thigh — On the human body, the limbs can be divided into segments, such as the arm and the forearm of the upper limb, and the thigh and the leg of the lower limb. If these segments are cut transversely, it is apparent that they are divided into multiple… … Wikipedia
Fascial compartments of arm — On the human body, the limbs can be divided into segments, such as the arm and the forearm of the upper limb, and the thigh and the leg of the lower limb. If these segments are cut transversely, it is apparent that they are divided into multiple… … Wikipedia
Fluid compartments — in the mammalian body broadly comprise two compartments, each with several subdivisions: intracellular fluid, which makes up approximately 60 65% of body water, and extracellular fluid, which makes up the other 35 40% of body water. (For all… … Wikipedia
transport between environmental compartments — This endpoint describes the distribution of a chemical between environmental compartments using fugacity based computer models. The results of the model algorithms provide an estimate of the amount of the chemical within a specific compartment.… … Petroleum refining glossary
Fascial compartments of forearm — can refer to: * Posterior compartment of the forearm * Anterior compartment of the forearm … Wikipedia
relative volumes occupied by some cellular compartments in a typical liver cell — ▪ Table The relative volumes occupied by some cellular compartments in a typical liver cell cellular compartment percent of total cell volume approximate number per cell cytosol 54 1 mitochondrion 22 1,700 endoplasmic reticulum plus Golgi… … Universalium
Compartment (development) — Compartments can be simply defined as separate, different, adjacent cell populations, which upon juxtaposition, create a lineage boundary.[1] This boundary prevents cell movement from cells from different lineages across this barrier, restricting … Wikipedia
Перевод: со всех языков на все языки
со всех языков на все языки- Со всех языков на:
- Все языки
- Со всех языков на:
- Все языки
- Английский
- Арабский
- Болгарский
- Венгерский
- Греческий
- Грузинский
- Датский
- Исландский
- Испанский
- Итальянский
- Латышский
- Литовский
- Малайский
- Немецкий
- Нидерландский
- Норвежский
- Польский
- Португальский
- Румынский, Молдавский
- Русский
- Словацкий
- Словенский
- Суахили
- Тамильский
- Турецкий
- Украинский
- Финский
- Французский
- Хинди
- Чешский
- Шведский