Sunderland

SUBJECT AREA: Electricity, Photography, film and optics

[br]

[br]

[br]

At the age of 14 Swan was apprenticed to a Sunderland firm of druggists, later joining John Mawson who had opened a pharmacy in Newcastle. While in Sunderland Swan attended lectures at the Athenaeum, at one of which W.E. Staite exhibited electric-arc and incandescent lighting. The impression made on Swan prompted him to conduct experiments that led to his demonstration of a practical working lamp in 1879. As early as 1848 he was experimenting with carbon as a lamp filament, and by 1869 he had mounted a strip of carbon in a vessel exhausted of air as completely as was then possible; however, because of residual air, the filament quickly failed.

Discouraged by the cost of current from primary batteries and the difficulty of achieving a good vacuum, Swan began to devote much of his attention to photography. With Mawson's support the pharmacy was expanded to include a photographic business. Swan's interest in making permanent photographic records led him to patent the carbon process in 1864 and he discovered how to make a sensitive dry plate in place of the inconvenient wet collodian process hitherto in use. He followed this success with the invention of bromide paper, the subject of a British patent in 1879.

Swan resumed his interest in electric lighting. Sprengel's invention of the mercury pump in 1865 provided Swan with the means of obtaining the high vacuum he needed to produce a satisfactory lamp. Swan adopted a technique which was to become an essential feature in vacuum physics: continuing to heat the filament during the exhaustion process allowed the removal of absorbed gases. The inventions of Gramme, Siemens and Brush provided the source of electrical power at reasonable cost needed to make the incandescent lamp of practical service. Swan exhibited his lamp at a meeting in December 1878 of the Newcastle Chemical Society and again the following year before an audience of 700 at the Newcastle Literary and Philosophical Society. Swan's failure to patent his invention immediately was a tactical error as in November 1879 Edison was granted a British patent for his original lamp, which, however, did not go into production. Parchmentized thread was used in Swan's first commercial lamps, a material soon superseded by the regenerated cellulose filament that he developed. The cellulose filament was made by extruding a solution of nitro-cellulose in acetic acid through a die under pressure into a coagulating fluid, and was used until the ultimate obsolescence of the carbon-filament lamp. Regenerated cellulose became the first synthetic fibre, the further development and exploitation of which he left to others, the patent rights for the process being sold to Courtaulds.

Swan also devised a modification of Planté's secondary battery in which the active material was compressed into a cellular lead plate. This has remained the central principle of all improvements in secondary cells, greatly increasing the storage capacity for a given weight.

[br]

SUBJECT AREA: Aerospace

[br]

[br]

[br]

Oswald Short trained as an engineer; he was largely self-taught but was assisted by his brothers Eustace and Horace. In 1898 Eustace and the young Oswald set up a balloon business, building their first balloon in 1901. Two years later they sold observation balloons to the Government of India, and further orders followed. Meanwhile, in 1906 Horace designed a high-altitude balloon with a spherical pressurized gondola, an idea later used by Auguste Piccard, in 1931. Horace, a strange genius with a dominating character, joined his younger brothers in 1908 to found Short Brothers. Their first design, based on the Wright Flyer, was a limited success, but No. 2 won a Daily Mail prize of £1,000. In the same year, 1909, the Wright brothers chose Shorts to build six of their new Model A biplanes. Still using the basic Wright layout, Horace designed the world's first twin-engined aeroplane to fly successfully: it had one engine forward of the pilot, and one aft. During the years before the First World War the Shorts turned to tractor biplanes and specialized in floatplanes for the Admiralty.

Oswald established a seaplane factory at Rochester, Kent, during 1913–14, and an airship works at Cardington, Bedfordshire, in 1916. Short Brothers went on to build the rigid airship R 32, which was completed in 1919. Unfortunately, Horace died in 1917, which threw a greater responsibility onto Oswald, who became the main innovator. He introduced the use of aluminium alloys combined with a smooth "stressed-skin" construction (unlike Junkers, who used corrugated skins). His sleek biplane the Silver Streak flew in 1920, well ahead of its time, but official support was not forthcoming. Oswald Short struggled on, trying to introduce his all-metal construction, especially for flying boats. He eventually succeeded with the biplane Singapore, of 1926, which had an all-metal hull. The prototype was used by Sir Alan Cobham for his flight round Africa. Several successful all-metal flying boats followed, including the Empire flying boats (1936) and the ubiquitous Sunderland (1937). The Stirling bomber (1939) was derived from the Sunderland. The company was nationalized in 1942 and Oswald Short retired the following year.

[br]

SUBJECT AREA: Electricity, Public utilities

[br]

[br]

[br]

Before devoting the whole of his attention to the electric light, Staite was a partner in a business of iron merchants and patented a method of obtaining extracts and essences. From 1834 he attempted to produce a continuous light by electricity. The first public exhibition of Staite's arc lamp incorporating a fixed-rate clockwork mechanism was given in 1847 to the Sunderland Literary and Philosophical Society. He also demonstrated an incandescent lamp with an iridioplatinum filament. Sir Joseph Wilson Swan recorded that it was attending lectures by Staite in Sunderland, Newcastle and Carlisle that started him on the quest which many years later was to lead to his incandescent lamp.

In association with William Petrie (1821–1904), Staite made an important advance in the development of arc lamps by introducing automatic regulation of the carbon rods by way of an electromagnet. This was the first of many self-regulating arc lamps that were invented during the nineteenth century employing this principle. A contributory factor in the success of Staite's lamp was the semi enclosure of the arc in a transparent vessel that reduced the consumption of carbons, a feature not used again until the 1890s. His patents included processes for preparing carbons and the construction of primary cells for arc lighting. An improved lamp used by Staite in a theatrical production at Her Majesty's Theatre, London, in April 1849 may be considered the first commercial success of the electric light in England. In spite of the limitations imposed by the use of primary cells as the only available source of power, serious interest in this system of electric lighting was shown by railway companies and dock authorities. However, after he had developed a satisfactory arc lamp, an end to these early experiments was brought about by Staite's death.

[br]

Geography: Sunderland (метроп. граф. Тайн-энд-Уир, Англия, Великобритания)

n. Sunderland

SUBJECT AREA: Ports and shipping

[br]

[br]

[br]

Amos Ayre grew up on the Tyne with the stimulus of shipbuilding and seafaring around him. After an apprenticeship as a ship draughtsman and distinction in his studies, he held responsible posts in the shipyards of Belfast and later Dublin. His first dramatic move came in 1909 when he accepted the post of Manager of the new Employment Exchange at Govan, then just outside Glasgow. During the First World War he was in charge of fleet coaling operations on the River Forth, and later was promoted Admiralty District Director for shipyard labour in Scotland.

Before the conclusion of hostilities, with his brother Wilfrid (later Sir Wilfrid Ayre) he founded the Burntisland Shipbuilding Company in Fife. Setting up on a green field site allowed the brothers to show innovation in design, production and marketing. Such was their success that the new yard was busy throughout the Depression, building standard ships which incorporated low operating costs with simplicity of construction.

Through public service culminating in the 1929 Safety of Life at Sea Conference, Amos Ayre became recognized not only as an eminent naval architect, but also as a skilled negotiator. In 1936 he was invited to become Chairman of the Shipbuilding Conference and thereby virtual leader of the industry. As war approached he planned with meticulous care the rearrangement of national shipbuilding capacity, enabling Britain to produce standard hulls ranging from the legendary TID tugs to the standard freighters built in Sunderland or Port Glasgow. In 1939 he became Director of Merchant Shipbuilding, a position he held until 1944, when with typical foresight he asked to be released to plan for shipbuilding's return to normality.

[br]

SUBJECT AREA: Mining and extraction technology

[br]

[br]

[br]

Buddle was educated by his father, a former schoolteacher who was from 1781 the first inspector and manager of the new Wallsend colliery. When his father died in 1806, John Buddle assumed full responsibility at the Wallsend colliery, and he remained as inspector and manager there until 1819, when he was appointed as colliery agent to the third Marquis of Londonderry. In this position, besides managing colliery business, he acted as an entrepreneur, gaining political influence and organizing colliery owners into fixing prices; Buddle and Londonderry were also responsible for the building of Seaham harbour. Buddle became known as the "King of the Coal Trade", gaining influence throughout the important Northumberland and Durham coalfield.

Buddle's principal contribution to mining technology was with regard to the improvement of both safety standards and productivity. In 1807 he introduced a steam-driven air pump which extracted air from the top of the upcast shaft. Two years later, he drew up plans which divided the coalface into compartments; this enabled nearly the whole seam to be exploited. The system of compound ventilation greatly reduced the danger of explosions: the incoming air was divided into two currents, and since each current passed through only half the underground area, the air was less heavily contaminated with gas.

In 1813 Buddle presented an important paper on his method for mine ventilation to the Sunderland Society for Preventing Accidents in Coal-mines, which had been established in that year following a major colliery explosion. He emphasized the need for satisfactory underground lighting, which influenced the development of safety-lamps, and assisted actively in the experiments with Humphrey Davy's lamp which he was one of the first mine managers to introduce. Another mine accident, a sudden flood, prompted him to maintain a systematic record of mine-workings which ultimately resulted in the establishment of the Mining Record Office.

[br]

SUBJECT AREA: Canals, Civil engineering, Ports and shipping, Railways and locomotives

[br]

[br]

[br]

William Jessop inherited from his father a natural ability in engineering, and because of his father's association with John Smeaton in the construction of Eddystone Lighthouse he was accepted by Smeaton as a pupil in 1759 at the age of 14. Smeaton was so impressed with his ability that Jessop was retained as an assistant after completion of his pupilage in 1767. As such he carried out field-work, making surveys on his own, but in 1772 he was recommended to the Aire and Calder Committee as an independent engineer and his first personally prepared report was made on the Haddlesey Cut, Selby Canal. It was in this report that he gave his first evidence before a Parliamentary Committee. He later became Resident Engineer on the Selby Canal, and soon after he was elected to the Smeatonian Society of Engineers, of which he later became Secretary for twenty years. Meanwhile he accompanied Smeaton to Ireland to advise on the Grand Canal, ultimately becoming Consulting Engineer until 1802, and was responsible for Ringsend Docks, which connected the canal to the Liffey and were opened in 1796. From 1783 to 1787 he advised on improvements to the River Trent, and his ability was so recognized that it made his reputation. From then on he was consulted on the Cromford Canal (1789–93), the Leicester Navigation (1791–4) and the Grantham Canal (1793–7); at the same time he was Chief Engineer of the Grand Junction Canal from 1793 to 1797 and then Consulting Engineer until 1805. He also engineered the Barnsley and Rochdale Canals. In fact, there were few canals during this period on which he was not consulted. It has now been established that Jessop carried the responsibility for the Pont-Cysyllte Aqueduct in Wales and also prepared the estimates for the Caledonian Canal in 1804. In 1792 he became a partner in the Butterley ironworks and thus became interested in railways. He proposed the Surrey Iron Railway in 1799 and prepared for the estimates; the line was built and opened in 1805. He was also the Engineer for the 10 mile (16 km) long Kilmarnock \& Troon Railway, the Act for which was obtained in 1808 and was the first Act for a public railway in Scotland. Jessop's advice was sought on drainage works between 1785 and 1802 in the lowlands of the Isle of Axholme, Holderness, the Norfolk Marshlands, and the Axe and Brue area of the Somerset Levels. He was also consulted on harbour and dock improvements. These included Hull (1793), Portsmouth (1796), Folkestone (1806) and Sunderland (1807), but his greatest dock works were the West India Docks in London and the Floating Harbour at Bristol. He was Consulting Engineer to the City of London Corporation from 1796to 1799, drawing up plans for docks on the Isle of Dogs in 1796; in February 1800 he was appointed Engineer, and three years later, in September 1803, he was appointed Engineer to the Bristol Floating Harbour. Jessop was regarded as the leading civil engineer in the country from 1785 until 1806. He died following a stroke in 1814.

[br]

SUBJECT AREA: Ports and shipping

[br]

[br]

[br]

On leaving school in 1894, MacGregor was apprenticed to a famous local shipyard, the Palmers Shipbuilding and Iron Company of Jarrow-on-Tyne. After four years he was entered for the annual examination of the Worshipful Company of Shipwrights, coming out top and being nominated Queen's Prizeman. Shortly thereafter he moved around shipyards to gain experience, working in Glasgow, Hull, Newcastle and then Dunkirk. His mastery of French enabled him to obtain in 1906 the senior position of Chief Draughtsman at an Antwerp shipyard, where he remained until 1914. On his return to Britain, he took charge of the small yard of Dibbles in Southampton and commenced a period of great personal development and productivity. His fertile mind enabled him to register no fewer than ten patents in the years 1919 to 1923.

In 1924 he started out on his own as a naval architect, specializing in the coal trade of the North Sea. At that time, colliers had wooden hatch covers, which despite every caution could be smashed by heavy seas, and which in time of war added little to hull integrity after a torpedo strike. The International Loadline Committee of 1932 noted that 13 per cent of ship losses were through hatch failures. In 1927, designs for selftrimming colliers were developed, as well as designs for steel hatch covers. In 1928 the first patents were under way and the business was known for some years as MacGregor and King. During this period, steel hatch covers were fitted to 105 ships.

In 1937 MacGregor invited his brother Joseph (c. 1883–1967) to join him. Joseph had wide experience in ship repairs and had worked for many years as General Manager of the Prince of Wales Dry Docks in Swansea, a port noted for its coal exports. By 1939 they were operating from Whitley Bay with the name that was to become world famous: MacGregor and Company (Naval Architects) Ltd. The new company worked in association with the shipyards of Austin's of Sunderland and Burntisland of Fife, which were then developing the "flatiron" colliers for the up-river London coal trade. The MacGregor business gained a great boost when the massive coastal fleet of William Cory \& Son was fitted with steel hatches.

In 1945 the brothers appointed Henri Kummerman (b. 1908, Vienna; d. 1984, Geneva) as their sales agent in Europe. Over the years, Kummerman effected greater control on the MacGregor business and, through his astute business dealings and his well-organized sales drives worldwide, welded together an international company in hatch covers, cargo handling and associated work. Before his death, Robert MacGregor was to see mastery of the design of single-pull steel hatch covers and to witness the acceptance of MacGregor hatch covers worldwide. Most important of all, he had contributed to great increases in the safety and the quality of life at sea.

[br]

See also: Ayre, Sir Amos Lowrey