Перевод: с русского на французский

с французского на русский

this+term

  • 1 комплектное распределительное устройство в металлической оболочке

    1. pareillage d’armoire
    2. appareillage sous enveloppe métallique
    3. appareillage recouvert de métal
    4. appareillage à compartiments (avec cloisons non métalliques)

     

    комплектное распределительное устройство в металлической оболочке
    -

    EN

    metal-enclosed switchgear
    switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
    NOTE The metal-enclosed switchgear is subdivided into three types:
    – metal-clad switchgear;
    – compartmented switchgear (with one or more non-metallic partitions);
    – cubicle switchgear
    [IEC 61992-1, ed. 2.0 (2006-02)]

    metal-clad switchgear
    metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
    NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
    – each main switching device;
    – components connected to one side of a main switching device, for example, feeder circuit;
    – components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
    NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
    [IEC 61992-1, ed. 2.0 (2006-02)]

    compartmented switchgear (with non-metallic partitions)

    metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
    NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
    [IEC 61992-1, ed. 2.0 (2006-02)]

    cubicle switchgear
    switchgear, other than metal-clad and compartmented switchgear
    NOTE This term applies to switchgear having a metal enclosure and having
    – a number of compartments fewer than required for metal-clad or compartmented switchgear, or
    – partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
    – no partitions.
    [IEC 61992-1, ed. 2.0 (2006-02)]

    FR

    appareillage sous enveloppe métallique
    ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
    NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
    – appareillage recouvert de métal;
    – appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
    – appareillage d’armoire.
    [IEC 61992-1, ed. 2.0 (2006-02)]

    appareillage recouvert de métal
    appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
    NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
    – chaque appareil principal de connexion;
    – les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
    – les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
    NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
    [IEC 61992-1, ed. 2.0 (2006-02)]

    appareillage à compartiments (avec cloisons non métalliques)
    appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
    NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
    [IEC 61992-1, ed. 2.0 (2006-02)]

    pareillage d’armoire

    appareillage, autre que l’appareillage recouvert de métal ou à compartiments
    NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
    – soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
    – soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
    – soit pas de cloisons.
    [IEC 61992-1, ed. 2.0 (2006-02)]

    0615

    Комплектное распределительное устройство в металлической оболочке
    Рис. ABB

    ГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ

    Тематики

    • комплектное распред. устройство (КРУ)

    Синонимы

    EN

    FR

    Русско-французский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке

  • 2 аналоговый (измерительный) прибор

    1. appareil de mesure (à affichage) analogique
    2. appareil (de mesure) analogique

     

    аналоговый (измерительный) прибор
    аналоговый показывающий прибор
    -
    [IEV number 312-02-09]

    EN

    analogue (measuring) instrument
    analogue indicating instrument
    measuring instrument whose indication is a continuous function of the corresponding value of the measurand or of the input signal
    NOTE – This term relates to the form of presentation of the indication, not to the principle of operation of the instrument.
    Source: ≈ VIM 4.10
    [IEV number 312-02-09]

    FR

    appareil de mesure (à affichage) analogique
    appareil (de mesure) analogique
    appareil de mesure dont l'indication est une fonction continue de la valeur correspondante du mesurande ou du signal d’entrée
    NOTE – Ce terme se rattache à la forme de présentation de l’indication, non au principe de fonctionnement de l’appareil.
    Source: ≈ VIM 4.10
    [IEV number 312-02-09]

    Тематики

    • измерение электр. величин в целом

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > аналоговый (измерительный) прибор

  • 3 вращающаяся электрическая машина

    1. machine (électrique) tournante

     

    вращающаяся электрическая машина
    Электротехническое устройство, предназначенное для преобразования энергии на основе электромагнитной индукции и взаимодействия магнитного поля с электрическим током, содержащее, по крайней мере, две части, участвующие в основном процессе преобразования и имеющие возможность вращаться или поворачиваться относительно друг друга.
    [ ГОСТ 27471-87]

    электрическая машина
    Электрическая машина, служит для преобразования механической энергии в электрическую и электрической в механическую, а также электрической энергии в электрическую же, отличающуюся по напряжению, роду тока, частоте и другим параметрам. Действие Э. м. основано на использовании явления электромагнитной индукции и законов, определяющих взаимодействие электрических токов и магнитных полей.
    Для преобразования механической энергии в электрическую служат генераторы электромашинные, электрической энергии в механическую — двигатели электрические. Каждая из этих машин (в соответствии с Ленца правилом) энергетически обратима, т. е. может работать как в генераторном, так и в двигательном режиме; однако выпускаемые промышленностью Э. м. обычно предназначены для выполнения определённой работы (см. также Переменного тока машина, Постоянного тока машина, Асинхронная электрическая машина, Синхронная машина, Коллекторная машина).
    Преобразования рода тока, частоты, числа фаз, напряжения осуществляют электромашинными преобразователями(см. Преобразовательная техника), электромашинными усилителями, трансформаторами электрическими.
    К Э. м. относят также машины специального назначения, например тахогенератор, тяговый электродвигатель.
    [БСЭ]

    EN

    (electrical) rotating machine
    an electrical apparatus depending on electromagnetic induction for its operation and having components capable of relative rotary movement and intended for converting energy
    NOTE – This term also applies to electrical apparatus operating on the same principle and similar in construction and intended for other purposes, e.g. regulation, supplying or absorbing reactive power. It is not intended to cover electrostatic machines.
    [IEV number 411-31-01]

    FR

    machine (électrique) tournante
    appareil électrique utilisant l'induction magnétique pour son fonctionnement, constitué d'éléments pouvant effectuer un mouvement relatif de rotation et destiné à la transformation de l'énergie
    NOTE – Ce terme s'applique également aux appareils électriques fonctionnant suivant le même principe, de construction analogue et utilisés à d'autres fins, par exemple à des fins de régulation, de fourniture et d'absorption de puissance réactive. Il ne s'étend pas aux machines électrostatiques.
    [IEV number 411-31-01]

    Тематики

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > вращающаяся электрическая машина

  • 4 время срабатывания электрического реле

    1. tеmрs d'action pour relais de tout ou rien
    2. Temps de fonctionnement;
    3. temps de fonctionnement

     

    время срабатывания электрического реле
    Время от момента, когда входная воздействующая или характеристическая величина электрического реле, находящегося в начальном или исходном состоянии, принимает в заданных условиях определенное значение до момента, когда реле завершает срабатывание
    [ ГОСТ 16022-83]

    EN

    operate time
    for a relay which is in the release condition (initial condition) the time interval between the instant a specified value of the input energizing quantity (characteristic quantity) is applied under specified condition and the instant when the relay switches
    NOTE – This term is used only when the relay has output circuits of the same type and no precision is required according to contact time difference.
    [IEV number 446-17-09]

    FR

    temps de fonctionnement
    temps d'action (terme déconseillé, utilisé pour les relais de tout ou rien)
    pour un relais qui est dans l'état de repos ou dans un état initial, temps écoulé entre l'instant où la grandeur d'alimentation d'entrée ou la grandeur caractéristique prend, dans des conditions spécifiées, une valeur définie et l'instant où le relais commute
    NOTE – Ce terme n'est utilisé que lorsque le relais ne comporte que des circuits de sortie de même nature et qu'aucune précision n'est nécessaire quant à la dispersion des temps de contact.
    [IEV number 446-17-09]

    Тематики

    EN

    DE

    FR

    122. Время срабатывания электрического реле

    D. Betätigungszeit

    E. Operate time

    F. Temps de fonctionnement;

    Temps d’action (pour relais de tout ou rien)

    Время от момента, когда входная воздействующая или характеристическая величина электрического реле, находящегося в начальном или исходном состоянии, принимает в заданных условиях определенное значение до момента, когда реле завершает срабатывание

    Источник: ГОСТ 16022-83: Реле электрические. Термины и определения оригинал документа

    Русско-французский словарь нормативно-технической терминологии > время срабатывания электрического реле

  • 5 дифференциальная защита от замыканий на землю

    1. protection différentielle de défaut à la terre

     

    дифференциальная защита от замыканий на землю
    Защита, в которой остаточный ток комплекта из трех фазных трансформаторов тока уравновешен остаточным током на выходе такого же комплекта трансформаторов тока или, как это чаще бывает, одного трансформатора тока, расположенного на заземляющем соединении, если таковое имеется в нейтральной точке.
    Примечание - Этот термин также употребляется в случаях, когда нейтраль защищаемой установки не заземлена, т.е. когда для защиты участка не требуется ни второй комплект из трех фазных трансформаторов тока, ни трансформатор тока в соединении нейтрали.
    [Разработка типовых структурных схем микропроцессорных устройств РЗА на объектах ОАО "ФКС ЕЭС". Пояснительная записка. Новосибирск 2006 г.]

    EN

    restricted earth-fault protection
    ground differential protection (US)

    protection in which the residual current from a set of three-phase current transformers is balanced against the residual output from a similar set of current transformers or, more usually, from a single current transformer located on the earthing connection, if any, of a neutral point
    Note – This term is also used when the neutral of the protected plant is unearthed i.e. neither a second set of three-phase current transformers nor a current transformer in the neutral connection is needed to restrict the protected section.
    [ IEV ref 448-14-29]

    FR

    protection différentielle de défaut à la terre
    protection dans laquelle le courant résiduel en provenance d'un ensemble de trois transformateurs de courant de phase est comparé à celui en provenance d'un ensemble similaire de transformateurs de courant ou, plus habituellement, d'un seul transformateur de courant placé dans la connexion de mise à la terre d'un point neutre, s'il y en a un
    Note – Ce terme est aussi utilisé lorsque le neutre de l'installation protégée n'est pas relié à la terre, c'est à dire que ni un deuxième ensemble de trois transformateurs de courant de phase ni un transformateur de courant dans la connexion de neutre ne sont nécessaires pour limiter la section protégée
    [ IEV ref 448-14-29]

    Тематики

    EN

    DE

    • Nullstromdifferentialschutz, m

    FR

    Русско-французский словарь нормативно-технической терминологии > дифференциальная защита от замыканий на землю

  • 6 калибровка средств измерений

    1. etalonnage

     

    калибровка средств измерений
    калибровка

    Совокупность операций, устанавливающих соотношение между значением величины, полученным с помощью данного средства измерений и соответствующим значением величины, определенным с помощью эталона с целью определения действительных метрологических характеристик этого средства измерений.
    Примечания
    1. Калибровке могут подвергаться средства измерений, не подлежащие государственному метрологическому контролю и надзору.
    2. Результаты калибровки позволяют определить действительные значения измеряемой величины, показываемые средством измерений, или поправки к его показаниям, или оценить погрешность этих средств. При калибровке могут быть определены и другие метрологические характеристики.
    3. Результаты калибровки средств измерений удостоверяются калибровочным знаком, наносимым на средства измерений, или сертификатом о калибровке, а также записью в эксплуатационных документах. Сертификат о калибровке представляет собой документ, удостоверяющий факт и результаты калибровки средства измерений, который выдается организацией, осуществляющей калибровку.
    [РМГ 29-99]

    калибровка средств измерений
    Совокупность операций, выполняемых с целью определения и подтверждения действительных значений метрологических характеристик и (или) пригодности к применению средства измерений, не подлежащих государственному метрологическому контролю и надзору.
    [Министерство топлива и энергетики РФ. Правила учета электрической энергии]

    калибровка средства измерений
    Совокупность операций, выполняемых с целью определения и подтверждения действительных значений метрологических характеристик и (или) пригодности к применению средства измерений, не применяемого в сфере, подлежащей государственному метрологическому контролю и надзору.
    Примечание
    Калибровка является метрологической услугой, основной задачей которой является передача калибруемому средству шкалы измерений в интересующем заказчика (потребителя) диапазоне измерений при приемлемой точности.
    [МИ 2365-96]

    EN

    calibration
    set of operations which establishes, by reference to standards, the relationship which exists, under specified conditions, between an indication and a result of a measurement
    NOTE 1 – This term is based on the "uncertainty" approach.
    NOTE 2 – The relationship between the indications and the results of measurement can be expressed, in principle, by a calibration diagram.
    Source: ≠ VIM 6.11
    [IEV number 311-01-09]

    FR

    étalonnage
    ensemble des opérations établissant, en référence à des étalons, la relation qui existe, dans les conditions spécifiées, entre une indication et un résultat de mesure
    NOTE 1 – Cette définition est conçue dans l’approche "incertitude".
    NOTE 2 – La relation entre les indications et les résultats de mesures peut être donnée, en principe, dans un diagramme d’étalonnage.
    Source: ≠ VIM 6.11
    [IEV number 311-01-09]

    Тематики

    • метрология, основные понятия

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > калибровка средств измерений

  • 7 комплектное распределительное устройство элегазовое

    1. appareillage sous enveloppe métallique à isolation gazeuse

     

    комплектное распределительное устройство элегазовое
    РУ, в котором основное оборудование заключено в оболочки, заполненные элегазом (SF6), служащим изолирующей и/или дугогасящей средой.
    [ПУЭ]

    EN

    gas-insulated metal-enclosed switchgear
    metal-enclosed switchgear in which the insulation is obtained, at least partly, by an insulating gas other than air at atmospheric pressure
    NOTE – This term generally applies to high-voltage switchgear and controlgear
    [IEV number 441-12-05]

    FR

    appareillage sous enveloppe métallique à isolation gazeuse
    appareillage de connexion sous enveloppe métallique dans laquelle l'isolation est obtenue, au moins partiellement, par un gaz isolant autre que l'air à pression atmosphérique
    NOTE – Ce terme s'applique généralement à l'appareillage à haute tension.
    [IEV number 441-12-05]


    0403

    Русско-французский словарь нормативно-технической терминологии > комплектное распределительное устройство элегазовое

  • 8 размещение (туристическая услуга)

    1. hébergement

     

    размещение
    Предоставление минимального набора услуг для ночлега, включая санитарно-гигиеническое оборудование.
    [ ГОСТ Р 53423-2009]

    размещение
    Данный термин относится к организации размещения членов Олимпийской Семьи в период до и во время Игр. Размещение также может включать контроль над удовлетворением потребностей в размещении других посетителей Игр. ОКОИ может учредить функциональное подразделение, занимающееся всеми аспектами размещения.
    [Департамент лингвистических услуг Оргкомитета «Сочи 2014». Глоссарий терминов]

    EN

    accommodation
    This term relates to the management of all pre-Games and Games-time accommodation for the Olympic Family. Accommodation may also have oversight of accommodation needs of other Games attendees. The OCOG may establish a functional area dealing with accommodation aspects.
    [Департамент лингвистических услуг Оргкомитета «Сочи 2014». Глоссарий терминов]


    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > размещение (туристическая услуга)

  • 9 разъединитель (заземлитель) с разделенными опорами

    1. sectionneur (sectionneur de terre) à éléments séparés

     

    разъединитель (заземлитель) с разделенными опорами
    Разъединитель (заземлитель), в котором подвижные и неподвижные контакты каждого полюса не опираются на одно общее основание или раму.
    Примечания
    1 Характерным примером является пантографный или полупантографный разъединитель.
    2 Этот термин распространяется только на разъединители высокого напряжения.
    [ ГОСТ Р 52726-2007]

    EN

    divided support disconnector, (earthing switch)
    a disconnector [earthing switch] in which the fixed and moving contacts of each pole are not supported by a common base or frame
    NOTE 1 A typical example is the pantograph or semi-pantograph disconnector.
    NOTE 2 This term applies to high-voltage disconnectors only.
    NOTE Examples are pantograph and semi-pantograph disconnectors.
    [IEC 62271-102, ed. 1.0 (2001-12)]

    FR

    sectionneur (sectionneur de terre) à éléments séparés
    sectionneur [sectionneur de terre] dont les contacts fixes et mobiles de chaque pôle ne sont pas supportés par une embase ou un châssis commun
    NOTE 1 Un exemple caractéristique est le sectionneur pantographe ou semi-pantographe.
    NOTE 2 Ce terme ne concerne que les sectionneurs à haute tension.
    NOTE Des exemples sont les sectionneurs pantographes ou semi-pantographes.
    [IEC 62271-102, ed. 1.0 (2001-12)]

    Тематики

    • высоковольтный аппарат, оборудование...

    Классификация

    >>>

    EN

    • divided support disconnector, (earthing switch)

    FR

    Русско-французский словарь нормативно-технической терминологии > разъединитель (заземлитель) с разделенными опорами

  • 10 система управления

    1. système de gestion

     

    система управления
    Совокупность административных органов, методов и технических средств управления, обеспечивающих выполнение задач управления
    [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]

    система управления
    Система политик, процессов, функций, стандартов, рекомендаций и инструментов, которые обеспечивают достижение организацией (или её частью) поставленных целей. Этот термин также используется в узком смысле для отдельных процессов или деятельности – например, «система управления событиями» или «система управления рисками». 
    [См. тж. система. Словарь терминов ITIL версия 1.0, 29 июля 2011 г.]

    EN

    management system
    The framework of policy, processes, functions, standards, guidelines and tools that ensures an organization or part of an organization can achieve its objectives. This term is also used with a smaller scope to support a specific process or activity – for example, an event management system or risk management system. See also system.
    [См. тж. система. Словарь терминов ITIL версия 1.0, 29 июля 2011 г.]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > система управления

  • 11 цифровой (измерительный) прибор

    1. appareil de mesure (à affichage) numérique

     

    цифровой (измерительный) прибор
    цифровой показывающий прибор
    -
    [IEV number 312-02-10]

    EN

    digital (measuring) instrument
    digital indicating instrument
    measuring instrument which provides a display or an output in digital form
    NOTE – This term relates to the form of presentation of the indication, not to the principle of operation of the instrument.
    Source: ≈ VIM 4.11
    [IEV number 312-02-10]

    FR

    appareil de mesure (à affichage) numérique
    appareil de mesure qui fournit un affichage ou une sortie sous forme numérique
    NOTE – Ce terme se rattache à la forme de présentation de l’indication, non au principe de fonctionnement de l’instrument.
    Source: ≈ VIM 4.11
    [IEV number 312-02-10]

    Тематики

    • измерение электр. величин в целом

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > цифровой (измерительный) прибор

  • 12 электродинамический прибор

    1. appareil électrodynamique

     

    электродинамический прибор
    -
    [IEV number 314-01-19]

    EN

    electrodynamic instrument
    instrument comprising one or more measuring elements which operate by the interaction of a current in one or more movable coils with a current in one or more fixed coils
    NOTE – This term is generally reserved for instruments which do not have ferromagnetic material in the magnetic circuit.
    [IEV number 314-01-19]

    FR

    appareil électrodynamique
    appareil comportant un ou plusieurs éléments de mesure dont le fonctionnement est basé sur l'interaction d'un courant dans une ou plusieurs bobines mobiles avec un courant dans une ou plusieurs bobines fixes
    NOTE – Ce terme est généralement réservé aux appareils qui ne comportent pas de matériau ferromagnétique dans le circuit magnétique.
    [IEV number 314-01-19]

    Тематики

    • измерение электр. величин в целом

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > электродинамический прибор

  • 13 информационные технологии

    1. traitement de l'information

     

    информационные технологии
    ИТ

    Использование технологий для хранения, обмена передачи или обработки информации. Технологии обычно включают в себя компьютеры, телекоммуникации, приложения и прочее программное обеспечение. Информация может включать в себя бизнес-данные, голосовые данные, изображения, видео, и т.п. Информационные технологии часто используются для поддержки бизнес-процессов при помощи ИТ-услуг.
    [Словарь терминов ITIL версия 1.0, 29 июля 2011 г.]

    информационные технологии
    Технологии поиска, сбора, хранения, обработки, предоставления, распространения информации и способы осуществления таких процессов и методов.
    [ http://slovar-lopatnikov.ru/]

    EN

    information technology
    IT

    The use of technology for the storage, communication or processing of information. The technology typically includes computers, telecommunications, applications and other software. The information may include business data, voice, images, video etc. Information technology is often used to support business processes through IT services.
    [Словарь терминов ITIL версия 1.0, 29 июля 2011 г.]

    information technology
    computer-related assets of an organization that represent nonphysical assets, such as software applications, process programs and personnel files
    NOTE 1 This use of the term information technology is not abbreviated throughout this document.
    NOTE 2 Another use of the term information technology (IT) refers to the company’s internal organization (for example, the IT department) or the items traditionally maintained by this department (that is, the administrative computers, servers and network infrastructure). This use of the term information technology is abbreviated as IT throughout this standard.
    [IEC 62443-2-1, ed. 1.0 (2010-11)]

    FR

    traitement de l'information
    actifs informatiques d’une organisation, correspondant à des actifs non physiques, tels que des applications logicielles, des programmes de pilotage de procédés et des fichiers concernant le personnel
    NOTE 1 Cette utilisation du terme de traitement de l'information n’est pas abrégée dans l’ensemble du présent document.
    NOTE 2 Une autre utilisation du terme de traitement de l'information (IT) désigne l’organisation interne à l’entreprise (par exemple, le service informatique) ou les éléments habituellement pris en charge par ce service (c’est-à-dire les ordinateurs administratifs, les serveurs et l’infrastructure réseau). Cette utilisation du terme de traitement de l'information est abrégée par le sigle IT dans l’ensemble de la présente norme.
    [IEC 62443-2-1, ed. 1.0 (2010-11)]

    Тематики

    Синонимы

    • ИТ

    EN

    FR

    Русско-французский словарь нормативно-технической терминологии > информационные технологии

  • 14 НКУ распределения и управления

    1. ensemble PSC
    2. ensemble d'appareillage de puissance
    3. appareillage

     

    низковольтное устройство распределения и управления (НКУ)
    Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
    [ ГОСТ Р МЭК 61439-1-2012]

    низковольтное устройство распределения и управления

    Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
    Примечания
    1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
    2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
    3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    power switchgear and controlgear assembly (PSC-assembly)
    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    [IEC 61439-2, ed. 1.0 (2009-01)]

    low-voltage switchgear and controlgear assembly
    combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
    [IEC 61892-3, ed. 2.0 (2007-11)]

    switchgear and controlgear
    a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEV number 441-11-01]

    switchgear and controlgear

    electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
    NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
    [IEV number 826-16-03 ]

    switchboard
    A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
    [ McGraw-Hill Dictionary of Architecture & Construction]

    switchboard
    One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
    [ The American Heritage Dictionary of the English Language]

    FR

    ensemble d'appareillage de puissance (ensemble PSC)
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    [IEC 61439-2, ed. 1.0 (2009-01)]

    appareillage, m
    matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
    NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
    [IEV number 826-16-03 ]

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEV number 441-11-01]


    A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
    Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
    The types of switchboards, classified by basic features of construction, are as follows:
    1. Live-front vertical panels
    2. Dead-front boards
    3. Safety enclosed boards( metal-clad)


    [American electricians’ handbook]

    Параллельные тексты EN-RU

    The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.

    Its definition, design and installation are based on precise rules; there is no place for improvisation.

    The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.

    It specifies in particular:

    > the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;

    > the design and verification rules, constituting a benchmark for product certification.

    All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.


    Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.

    A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.

    Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.

    What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

    [Schneider Electric]

    НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.

    Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.

    Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).

    В частности, он определяет:

    > распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;

    > конструкцию, технические характеристики, виды и методы испытаний НКУ.

    В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.

    Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.

    Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.

    Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.

    Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.

    [Перевод Интент]

     

    LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.

    The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.

    In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.

    Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.

    The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.

    [ABB]

    Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.

    Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам

    Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.

    Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются

    Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Действия

    Синонимы

    Сопутствующие термины

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

    Русско-французский словарь нормативно-технической терминологии > НКУ распределения и управления

  • 15 электричество

    1. électricité

     

    электричество (1)
    -
    [IEV number 151-11-01]

    EN

    electricity (1)
    set of phenomena associated with electric charges and electric currents
    NOTE 1 – Examples of usage of this concept: static electricity, biological effects of electricity.
    NOTE 2 – In English, the term "electricity" is also used to denote electric energy. In French, the usage of the term "électricité" in this sense is deprecated. For example, the expression "distribution of electricity" is used in English, but "distribution d'énergie électrique" is used in French.
    Source: 121-11-76 MOD
    [IEV number 151-11-01]

    FR

    électricité (1), f
    ensemble de phénomènes associés à des charges électriques et à des courants électriques
    NOTE 1 – Exemples d’emploi de ce concept: électricité statique, effets biologiques de l’électricité.
    NOTE 2 – En anglais, le terme "electricity" est aussi utilisé au sens d'énergie électrique. En français, l'emploi du terme "électricité" est déconseillé dans ce sens. Par exemple, l'expression "distribution of electricity", employée en anglais, correspond en français à "distribution d'énergie électrique".
    Source: 121-11-76 MOD
    [IEV number 151-11-01]

     

     

    электричество (2)
    -
    [IEV number 151-11-02]

    EN

    electricity (2)
    branch of science dealing with electric phenomena
    NOTE – Examples of usage of this concept: handbook of electricity, school of electricity.
    [IEV number 151-11-02]

    FR

    électricité (2), f
    branche de la science traitant des phénomènes électriques
    NOTE – Exemples d’emploi de ce concept: manuel d’électricité, école d’électricité.
    [IEV number 151-11-02]

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > электричество

  • 16 оптимизация

    1. optimisation

     

    оптимизация
    Процесс отыскания варианта, соответствующего критерию оптимальности
    [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]

    оптимизация
    1. Процесс нахождения экстремума функции, т.е. выбор наилучшего варианта из множества возможных, процесс выработки оптимальных решений; 2. Процесс приведения системы в наилучшее (оптимальное) состояние. Иначе говоря, первое определение трактует термин «О.» как факт выработки и принятия оптимального решения (в широком смысле этих слов); мы выясняем, какое состояние изучаемой системы будет наилучшим с точки зрения предъявляемых к ней требований (критерия оптимальности) и рассматриваем такое состояние как цель. В этом смысле применяется также термин «субоптимизация» в случаях, когда отыскивается оптимум по какому-либо одному критерию из нескольких в векторной задаче оптимизации (см. Оптимальность по Парето, Векторная оптимизация). Второе определение имеет в виду процесс выполнения этого решения: т.е. перевод системы от существующего к искомому оптимальному состоянию. В зависимости от вида используемых критериев оптимальности (целевых функций или функционалов) и ограничений модели (множества допустимых решений) различают скалярную О., векторную О., мно¬гокритериальную О., стохастическую О (см. Стохастическое программирование), гладкую и негладкую (см. Гладкая функция), дискретную и непрерывную (см. Дискретность, Непрерывность), выпуклую и вогнутую (см. Выпуклость, вогнутость) и др. Численные методы О., т.е. методы построения алгоритмов нахождения оп¬тимальных значений целевых функций и соответствующих точек области допустимых значений — развитой отдел современной вычислительной математики. См. Оптимальная задача.
    [ http://slovar-lopatnikov.ru/]

    Параллельные тексты EN-RU из ABB Review. Перевод компании Интент

    The quest for the optimum

    Вопрос оптимизации

    Throughout the history of industry, there has been one factor that has spurred on progress more than any other. That factor is productivity. From the invention of the first pump to advanced computer-based optimization methods, the key to the success of new ideas was that they permitted more to be achieved with less. This meant that consumers could, over time and measured in real terms, afford to buy more with less money. Luxuries restricted to a tiny minority not much more than a generation ago are now available to almost everybody in developed countries, with many developing countries rapidly catching up.

    На протяжении всей истории промышленности существует один фактор, подстегивающий ее развитие сильнее всего. Он называется «производительность». Начиная с изобретения первого насоса и заканчивая передовыми методами компьютерной оптимизации, успех новых идей зависел от того, позволяют ли они добиться большего результата меньшими усилиями. На языке потребителей это значит, что они всегда хотят купить больше, а заплатить меньше. Меньше чем поколение назад, многие предметы считались роскошью и были доступны лишь немногим. Сейчас в развитых странах, число которых быстро увеличивается, подобное может позволить себе почти каждый.

    With industry and consumers expecting the trend towards higher productivity to continue, engineering companies are faced with the challenge of identifying and realizing further optimization potential. The solution often lies in taking a step back and looking at the bigger picture. Rather than optimizing every step individually, many modern optimization techniques look at a process as a whole, and sometimes even beyond it. They can, for example, take into account factors such as the volatility of fuel quality and price, the performance of maintenance and service practices or even improved data tracking and handling. All this would not be possible without the advanced processing capability of modern computer and control systems, able to handle numerous variables over large domains, and so solve optimization problems that would otherwise remain intractable.

    На фоне общей заинтересованности в дальнейшем росте производительности, машиностроительные и проектировочные компании сталкиваются с необходимостью определения и реализации возможностей по оптимизации своей деятельности. Для того чтобы найти решение, часто нужно сделать шаг назад, поскольку большое видится на расстоянии. И поэтому вместо того, чтобы оптимизировать каждый этап производства по отдельности, многие современные решения охватывают процесс целиком, а иногда и выходят за его пределы. Например, они могут учитывать такие факторы, как изменение качества и цены топлива, результативность ремонта и обслуживания, и даже возможности по сбору и обработке данных. Все это невозможно без использования мощных современных компьютеров и систем управления, способных оперировать множеством переменных, связанных с крупномасштабными объектами, и решать проблемы оптимизации, которые другим способом решить нереально.

    Whether through a stunning example of how to improve the rolling of metal, or in a more general overview of progress in optimization algorithms, this edition of ABB Review brings you closer to the challenges and successes of real world computer-based optimization tasks. But it is not in optimization and solving alone that information technology is making a difference: Who would have thought 10 years ago, that a technician would today be able to diagnose equipment and advise on maintenance without even visiting the factory? ABB’s Remote Service makes this possible. In another article, ABB Review shows how the company is reducing paperwork while at the same time leveraging quality control through the computer-based tracking of production. And if you believed that so-called “Internet communities” were just about fun, you will be surprised to read how a spin-off of this idea is already leveraging production efficiency in real terms. Devices are able to form “social networks” and so facilitate maintenance.

    Рассказывая об ошеломляющем примере того, как был усовершенствован процесс прокатки металла, или давая общий обзор развития алгоритмов оптимизации, этот выпуск АББ Ревю знакомит вас с практическими задачами и достигнутыми успехами оптимизации на основе компьютерных технологий. Но информационные технологии способны не только оптимизировать процесс производства. Кто бы мог представить 10 лет назад, что сервисный специалист может диагностировать производственное оборудование и давать рекомендации по его обслуживанию, не выходя из офиса? Это стало возможно с пакетом Remote Service от АББ. В другой статье этого номера АББ Ревю рассказывается о том, как компания смогла уменьшить бумажный документооборот и одновременно повысить качество управления с помощью компьютерного контроля производства. Если вы считаете, что так называемые «интернет-сообщества» служат только для развлечения,
    то очень удивитесь, узнав, что на основе этой идеи можно реально повысить производительность. Формирование «социальной сети» из автоматов значительно облегчает их обслуживание.

    This edition of ABB Review also features several stories of service and consulting successes, demonstrating how ABB’s expertise has helped customers achieve higher levels of productivity. In a more fundamental look at the question of what reliability is really about, a thought-provoking analysis sets out to find the definition of that term that makes the greatest difference to overall production.

    В этом номере АББ Ревю есть несколько статей, рассказывающих об успешных решениях по организации дистанционного сервиса и консультирования. Из них видно, как опыт АББ помогает нашим заказчикам повысить производительность своих предприятий. Углубленные размышления о самой природе термина «надежность» приводят к парадоксальным выводам, способным в корне изменить представления об оптимизации производства.

    Robots have often been called “the extended arm of man.” They are continuously advancing productivity by meeting ever-tightening demands on precision and efficiency. This edition of ABB Review dedicates two articles to robots.

    Робот – это могучее «продолжение» человеческой руки. Применение роботов способствует постоянному повышению производительности, поскольку они отвечают самым строгим требованиям точности и эффективности. Две статьи в этом номере АББ Ревю посвящены роботам.

    Further technological breakthroughs discussed in this issue look at how ABB is keeping water clean or enabling gas to be shipped more efficiently.

    Говоря о других технологических достижениях, обсуждаемых на страницах журнала, следует упомянуть о том, как компания АББ обеспечивает чистоту воды, а также более эффективную перевозку сжиженного газа морским транспортом.

    The publication of this edition of ABB Review is timed to coincide with ABB Automation and Power World 2009, one of the company’s greatest customer events. Readers visiting this event will doubtlessly recognize many technologies and products that have been covered in this and recent editions of the journal. Among the new products ABB is launching at the event is a caliper permitting the flatness of paper to be measured optically. We are proud to carry a report on this product on the very day of its launch.

    Публикация этого номера АББ Ревю совпала по времени с крупнейшей конференцией для наших заказчиков «ABB Automation and Power World 2009». Читатели, посетившие ее, смогли воочию увидеть многие технологии и изделия, описанные в этом и предыдущих выпусках журнала. Среди новинок, представленных АББ на этой конференции, был датчик, позволяющий измерять толщину бумаги оптическим способом. Мы рады сообщить, что сегодня он готов к выпуску.

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > оптимизация

  • 17 локальное климатическое изменение

    1. altération climatique

     

    локальное климатическое изменение

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    climatic alteration
    The slow variation of climatic characteristics over time at a given place. This may be indicated by the geological record in the long term, by changes in the landforms in the intermediate term, and by vegetation changes in the short term. (Source: WHIT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > локальное климатическое изменение

  • 18 рынок краткосрочных финансовых обязательств

    1. marché monétaire

     

    рынок краткосрочных финансовых обязательств

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    money market
    A financial market that trades Treasury bills, commercial paper and other short-term financial instruments. This market is often used by businesses when they need short-term funds to bridge the gap between paying operating costs and collecting revenue from product sales. As such, the term "money" in money market indicates that businesses are using highly liquid instruments to raise the money need for operating expenses. (Source: AMOS2)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > рынок краткосрочных финансовых обязательств

  • 19 ток проводимости

    1. courant de conduction

     

    ток проводимости 
    Явление направленного движения свободных носителей электрического заряда в веществе или в пустоте, количественно характеризуемое скалярной величиной, равной производной по времени от электрического заряда, переносимого свободными носителями заряда сквозь рассматриваемую поверхность. 
    [ ГОСТ Р 52002-2003]

    EN

    (electric) current
    (conduction) current

    scalar quantity equal to the flux of the electric current density J through a given directed surface S:
    0201
    where endA is the vector surface element
    NOTE 1 – The electric current through a surface is equal to the limit of the quotient of the electric charge transferred through that surface during a time interval by the duration of this interval when this duration tends to zero.
    NOTE 2 – For charge carriers confined to a surface, the electric current is defined through a curve of this surface (see the note to term “lineic electric current”).
    [IEV number 121-11-13]

    FR

    courant (électrique), m
    courant (de conduction), m
    grandeur scalaire égale au flux de la densité de courant électrique J à travers une surface orientée donnée S:
    0201
    où endA est l'élément vectoriel de surface
    NOTE 1 – Le courant électrique à travers une surface est égal à la limite du quotient de la charge électrique traversant cette surface pendant un intervalle de temps par la durée de cet intervalle lorsque cette durée tend vers zéro.
    NOTE 2 – Pour des porteurs de charge confinés sur une surface, le courant électrique est défini à travers une courbe de cette surface (voir la note au terme "densité linéique de courant").
    [IEV number 121-11-13]

    Тематики

    • электротехника, основные понятия

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > ток проводимости

  • 20 пол плавающий

    1. plancher flottant

     

    пол плавающий
    Пол, отделённый от основания и стен амортизирующими прослойками или изолирующими устройствами для повышения звукоизоляции смежных помещений
    [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]

    EN

    floating floor
    The upper layer of floor construction supported on battens, mountings or a resilient sheet membrane of damping material such as expanded polystyrene or mineral wool to provide acoustic isolation.


    floating floor
    A floating floor is a floor that does not need to be nailed or glued to the subfloor. The term floating floor refers to the installation method, but is often used synonymously with laminate flooring in a domestic context.
    A sprung floor is a special type of floating floor designed to enhance sports or dance performance. In general though the term refers to a floor used to reduce noise or vibration.
    A domestic floating floor might be constructed over a subfloor or even over an existing floor. It can consist of a glass fibre, felt or cork layer for sound insulation with neoprene pads holding up a laminate floor. There is a gap between the floating floor and the walls to decouple them and allow for expansion; this gap is covered with skirting boards or mouldings.
    Floating floors as used in sound studios can be either just larger versions of the domestic variety, or much larger constructions with slabs of concrete to keep the resonance frequency down. The manufacture of integrated circuits uses massive floating floors with hundreds of tons in weight of concrete to avoid vibration affecting mask alignment.
    Floating floors are one of the requirements for the THX high-fidelity sound reproduction standard for movie theaters, screening rooms, home theaters, computer speakers, gaming consoles, and car audio systems.
    While floating floors add to the appeal of a home, they are not recommended for areas that may get wet, i.e. bathrooms and near exterior doors.
    [http://en.wikipedia.org/wiki/Floating_floor]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > пол плавающий

См. также в других словарях:

  • term sheet — See heads of terms. Related links + term sheet USA This term has a number of meanings. In the context of: • Corporate, it is also known as a letter of intent, memorandum of understanding, heads of agreement or heads of terms. A term sheet is a… …   Law dictionary

  • term — term1 [ tɜrm ] noun *** ▸ 1 word/phrase for someone/something ▸ 2 for considering aspects ▸ 3 period of time ▸ 4 end of period something lasts ▸ 5 in mathematics ▸ 6 conditions of agreement ▸ + PHRASES 1. ) count a word or phrase used for… …   Usage of the words and phrases in modern English

  • term — I UK [tɜː(r)m] / US [tɜrm] noun Word forms term : singular term plural terms *** 1) a) [countable] a word or phrase used for referring to something a technical/medical/legal/scientific term In simple terms, you need more exercise. The president… …   English dictionary

  • term*/*/*/ — [tɜːm] noun I 1) [C] a word or phrase that is used for referring to or describing someone or something a technical/medical term[/ex] 2) terms [plural] used for saying which aspects of something you are considering or including In practical terms …   Dictionary for writing and speaking English

  • Term life insurance — or term assurance is life insurance which provides coverage at a fixed rate of payments for a limited period of time, the relevant term. After that period expires coverage at the previous rate of premiums is no longer guaranteed and the client… …   Wikipedia

  • Term limits in the United States — Term limits to offices in the United States:Historical backgroundTerm limits, or Rotation in office, dates back to the American Revolution, and prior to that to the democracies and republics of antiquity. The council of 500 in ancient Athens… …   Wikipedia

  • This Sporting Life (radio program) — This Sporting Life is a Triple J radio program, created by actor writer comedians John Doyle and Greig Pickhaver, who perform as their characters Roy and HG. First broadcast in 1986 and still on the air, it is one of the longest running, most… …   Wikipedia

  • Term Discrimination — is a way to rank keywords in how useful they are for Information Retrieval. Overview This is a method similar to tf idf but it deals with finding keywords suitable for information retrieval and ones that are not. Please refer to Vector Space… …   Wikipedia

  • Term of office — or term in office refers to the length of time a person (usually a politician) serves in a particular office. Contents 1 United Kingdom 1.1 Prime Minister 1.2 Devolved Administrations 2 …   Wikipedia

  • Term limits in Oregon — Term limits legislation – term limits for state and federal office holders – has been a recurring political issue in the U.S. state of Oregon since 1992. In that year s general election, Oregon voters approved Ballot Measure 3, an initiative that …   Wikipedia

  • Term — Term, n. [F. terme, L. termen, inis, terminus, a boundary limit, end; akin to Gr. ?, ?. See {Thrum} a tuft, and cf. {Terminus}, {Determine}, {Exterminate}.] 1. That which limits the extent of anything; limit; extremity; bound; boundary. [1913… …   The Collaborative International Dictionary of English

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»