-
81 electrical switchboard
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > electrical switchboard
-
82 low voltage controlgear and assembly
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > low voltage controlgear and assembly
-
83 low voltage switchboard
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > low voltage switchboard
-
84 low voltage switchgear and controlgear assembly
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > low voltage switchgear and controlgear assembly
-
85 low-voltage switchgear and controlgear assembly
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > low-voltage switchgear and controlgear assembly
-
86 LV switchgear and controlgear assembly
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > LV switchgear and controlgear assembly
-
87 LV switchgear assembly
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > LV switchgear assembly
-
88 power switchgear and controlgear assembly
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
силовое комплектное устройство распределения и управления
СНКУ
Низковольтное комплектное устройство распределения и управления, применяемое для распределения и управления энергией всех типов нагрузок промышленного, коммерческого и аналогичного назначений, не предназначенное для управления не квалифицированным персоналом.
[ ГОСТ Р МЭК 61439.2-2012]EN
power switchgear and controlgear assembly
PSC-assembly
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
NOTE It is not excluded for a PSC-assembly to be located in an area accessible to ordinary persons.
[IEC 61439-2, ed. 2.0 (2011-08)]FR
ensemble d'appareillage de puissance
ensemble EAP
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
NOTE Il n’est pas exclu d’implanter un ensemble EAP dans une zone accessible aux personnes ordinaires.
[IEC 61439-2, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Англо-русский словарь нормативно-технической терминологии > power switchgear and controlgear assembly
-
89 PSC-assembly
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
силовое комплектное устройство распределения и управления
СНКУ
Низковольтное комплектное устройство распределения и управления, применяемое для распределения и управления энергией всех типов нагрузок промышленного, коммерческого и аналогичного назначений, не предназначенное для управления не квалифицированным персоналом.
[ ГОСТ Р МЭК 61439.2-2012]EN
power switchgear and controlgear assembly
PSC-assembly
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
NOTE It is not excluded for a PSC-assembly to be located in an area accessible to ordinary persons.
[IEC 61439-2, ed. 2.0 (2011-08)]FR
ensemble d'appareillage de puissance
ensemble EAP
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
NOTE Il n’est pas exclu d’implanter un ensemble EAP dans une zone accessible aux personnes ordinaires.
[IEC 61439-2, ed. 2.0 (2011-08)]Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
FR
Англо-русский словарь нормативно-технической терминологии > PSC-assembly
-
90 switchgear/controlgear
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > switchgear/controlgear
-
91 MMC
1) Общая лексика: hum. сокр. Macro Molecular Complex2) Компьютерная техника: Multi Media Card, Multi Memory Controller, Multimedia Memory Cards3) Медицина: (medical male circumcision) мужское обрезание по медицинским показаниям, minimal microbicide concentration, МБК (минимальная бактерицидная концентрация), Митомицин С, Митомицин-С4) Американизм: Mobile Management Command5) Военный термин: maintenance management center, maintenance management course, major military command, materiel maintenance center, materiel management center, materiel management code, military microcomputer, missile and munitions center, missile maintenance crew, missile measurements center, missile motion computer, mission management center, mortar motor carrier6) Техника: MultiMediaCard, main memory capacity, main memory controller, mitomycin, multi media center, myelomeningocele7) Шутливое выражение: Maiden Mother Crone8) Архитектура: Modular Methods of Construction9) Оптика: multimedia controller10) Телекоммуникации: Minimum Monthly Charge11) Сокращение: Machinist Mate Chief (USN), Materiel Management Center (US Army), Metal Matrix Composite, Mission Management Computer, Modular Mission Computer, MultiMedia Catalog12) Физика: Moving Micro Cross13) Физиология: migrating motor complex14) Электроника: Monolithic Multilayer Ceramic, Multi Mini Capacitor, Multi Miniature Capacitor15) Вычислительная техника: Microsoft Management Console, Microsoft Management Console (MS, Windows, NT), MultiMedia Commands (SAM)16) Иммунология: mucosal mast cell17) Онкология: Maximum Mass Concentration18) Связь: Man-Machine Command/Communication19) Банковское дело: сертификат денежного рынка (money market certificate)20) Фирменный знак: Massachusetts Marketing Center, Mitsubishi Motors Corporation, Music Message Center22) Образование: Massachusetts Mechanic Center23) Инвестиции: money market certificate24) Сетевые технологии: Media Master Control, Midi Machine Control, Micro-scheduled Management Command25) Программирование: Man Machine Code26) Автоматика: maximum material condition27) Океанография: Marine Mammal Commission28) Расширение файла: Matched Memory Cycle, Microcomputer Marketing Council, Microsoft Management Console (Microsoft)29) Энергосистемы: Monopoly and Mergers Commission30) Строительные материалы: водозатворяемость (%), формовочная влажность (%), mixing moisture content (%), mixing water content, molding water content31) Общественная организация: Marine Mammal Center32) Правительство: Maine Medical Center33) NYSE. Marsh & McLennan Companies, Inc.34) Музеи: Machina Museum Committee -
92 mmc
1) Общая лексика: hum. сокр. Macro Molecular Complex2) Компьютерная техника: Multi Media Card, Multi Memory Controller, Multimedia Memory Cards3) Медицина: (medical male circumcision) мужское обрезание по медицинским показаниям, minimal microbicide concentration, МБК (минимальная бактерицидная концентрация), Митомицин С, Митомицин-С4) Американизм: Mobile Management Command5) Военный термин: maintenance management center, maintenance management course, major military command, materiel maintenance center, materiel management center, materiel management code, military microcomputer, missile and munitions center, missile maintenance crew, missile measurements center, missile motion computer, mission management center, mortar motor carrier6) Техника: MultiMediaCard, main memory capacity, main memory controller, mitomycin, multi media center, myelomeningocele7) Шутливое выражение: Maiden Mother Crone8) Архитектура: Modular Methods of Construction9) Оптика: multimedia controller10) Телекоммуникации: Minimum Monthly Charge11) Сокращение: Machinist Mate Chief (USN), Materiel Management Center (US Army), Metal Matrix Composite, Mission Management Computer, Modular Mission Computer, MultiMedia Catalog12) Физика: Moving Micro Cross13) Физиология: migrating motor complex14) Электроника: Monolithic Multilayer Ceramic, Multi Mini Capacitor, Multi Miniature Capacitor15) Вычислительная техника: Microsoft Management Console, Microsoft Management Console (MS, Windows, NT), MultiMedia Commands (SAM)16) Иммунология: mucosal mast cell17) Онкология: Maximum Mass Concentration18) Связь: Man-Machine Command/Communication19) Банковское дело: сертификат денежного рынка (money market certificate)20) Фирменный знак: Massachusetts Marketing Center, Mitsubishi Motors Corporation, Music Message Center22) Образование: Massachusetts Mechanic Center23) Инвестиции: money market certificate24) Сетевые технологии: Media Master Control, Midi Machine Control, Micro-scheduled Management Command25) Программирование: Man Machine Code26) Автоматика: maximum material condition27) Океанография: Marine Mammal Commission28) Расширение файла: Matched Memory Cycle, Microcomputer Marketing Council, Microsoft Management Console (Microsoft)29) Энергосистемы: Monopoly and Mergers Commission30) Строительные материалы: водозатворяемость (%), формовочная влажность (%), mixing moisture content (%), mixing water content, molding water content31) Общественная организация: Marine Mammal Center32) Правительство: Maine Medical Center33) NYSE. Marsh & McLennan Companies, Inc.34) Музеи: Machina Museum Committee -
93 agency
агентство; управление; учреждение; орган; организационная единица; средствоArmament agency, DA — Бр. главное управление вооружений СВ
Armed Forces [Services] Technical Information agency — управление военно-технической информации ВС
Army Logistics Doctrine, Systems and Readiness agency — управление разработки принципов деятельности, наставлений и руководств службы тыла СВ
cue target acquisition agencies (on) — ориентировать органы разведки целей (на определенные объекты)
Defense Communications agency, Europe — Европейский отдел управления связи МО
Intelligence Research agency, State Department — управление анализа разведывательной информации госдепартамента
Nuclear Munitions agency, JCS — управление ядерных боеприпасов КНШ
Organization-Mobilization (AG) agency, DA — Бр. главное организационно-мобилизационное управление СВ
Studies, Analysis and Gaming agency — управление специальных исследований, анализа и проигрыша различных вариантов войны (КНШ)
Surveillance, Target Acquisition and Night Observation Systems agency — НИЦ систем наблюдения, обнаружения целей и ночного видения
— C agency -
94 director
начальник (управления, службы, отдела) ; руководитель; директор; ( центральный) прибор управления огнем; прибор управления артиллерийским зенитным огнем, ПУАЗО; целеуказатель; оператор наведения; пункт [самолет, корабль] наведения; ретранслятор; буссольAssistant director, Review and Analysis — помощник начальника управления по проверке и анализу (контрактов) (МО)
Deputy CIA director, Essential Elements of Information — заместитель директора ЦРУ по постановке основных задач сбора разведывательной информации
Deputy director of Defense Research and Engineering for Administration, Evaluation and Management — заместитель начальника управления НИОКР МО по административным вопросам, вопросам оценки и управления
Deputy director, Contract Administration Services — заместитель начальника службы по контролю за исполнением контрактов (МО)
Deputy director, Strategic and Naval Warfare Systems — заместитель начальника управления по стратегическим и морским системам оружия (МО)
Deputy director, Tactical Air and Land Warfare Systems — заместитель начальника управления по тактическим авиационным и наземным системам оружия (МО)
Deputy director, Test Facilities and Resources — заместитель начальника управления по испытательному оборудованию и ресурсам (МО)
director EW and C3 Countermeasures — начальник управления РЭБ и мер противодействия системам руководства, управления и связи (МО)
director for C3 Policy — начальник управления разработки программ руководства, управления и связи (МО)
director for Operations, Joint Staff — начальник оперативного управления объединенного штаба (КНШ)
director for Plans and Policy, Joint Staff — начальник управления планирования и строительства ВС объединенного штаба;
director of Administrative Services, Joint Staff — начальник административного управления объединенного штаба
director of Civilian Marksmanship, National Board for the Promotion of Rifle Practice — начальник управления стрелковой подготовки гражданского персонала Национального комитета содействия развитию стрелкового спорта (СВ)
director of Manning (Army) — Бр. начальник управления комплектования (СВ)
director of Research, Development, Test and Evaluation — начальник управления НИОКР, испытаний и оценок
director, Acquisition and Support Planning — начальник управления закупок (военной техники) и планирования МТО (МО)
director, Administrative Support Group — начальник группы административного обеспечения (СВ)
director, Admiralty Marine Technology Establishment — Бр. начальник управления разработки боевой техники МП
director, Admiralty Surface Weapons Establishment — Бр. начальник управления разработки систем надводного оружия ВМС
director, African Region — начальник управления стран Африки (МО)
director, Air National Guard — директор штаба НГ ВВС
director, Air Vehicles Technology — начальник управления разработки авиационных транспортных систем (МО)
director, Air Warfare — начальник управления авиационных систем оружия (МО)
director, Army Air Corps — Бр. начальник управления армейской авиации СВ
director, Army Aviation — начальник управления армейской авиации
director, Army Council of Review Boards — председатель совета СВ по контролю за деятельностью апелляционных комиссий
director, Army Medical Services — Бр. начальник медицинской службы СВ
director, Army National Guard — директор штаба НГ СВ
director, Army Programs — начальник управления разработки программ СВ
director, C3 Resources — начальник управления разработки систем руководства, управления и связи (МО)
director, Chemical Defence Establishment — Бр. директор НИЦ средств химической защиты
director, Civil Affairs — начальник управления по связям с гражданской администрацией и населением
director, Civilian Employees Security Program — начальник службы контрразведывательной проверки гражданского персонала (СВ)
director, Combat Support — начальник управления боевого обеспечения (МО)
director, Communications Systems — начальник управления систем связи (МО)
director, Contracts and Systems Acquisition — начальник управления заключения контрактов и закупок систем оружия и военной техники (МО)
director, Coordination and Analysis — начальник управления координации и анализа
director, Counterintelligence and Investigative Programs — начальник управления программ контрразведки и специальных расследований (МО)
director, Cruise Missile Systems — начальник управления систем КР (МО)
director, Defence Operational Analysis Establishment — Бр. начальник военнонаучного управления МО
director, Defense Research and Engineering — начальник управления НИОКР МО
director, Defense Sciences — начальник научно-исследовательского управления МО
director, Defense Supply Service-Washington — начальник службы снабжения зоны Вашингтона в МО
director, Defense Telephone Service-Washington — начальник телефонной службы зоны Вашингтона в МО
director, Defense Test and Evaluation — начальник управления МО по испытанию и оценке (оружия и военной техники)
director, DIA — начальник разведывательного управления МО
director, Directed Energy Programs — начальник управления программ использования направленной энергии (МО)
director, Doctrine, Organization and Training — начальник управления разработки доктрин, вопросов организации и боевой подготовки
director, DOD SALT Task Force — председатель рабочей группы МО по вопросам переговоров в рамках ОС В
director, East Asia and Pacific Region — начальник управления стран Восточной Азии и Тихого океана (МО)
director, Electronics and Physical Sciences — начальник управления по электронике и естественным наукам (МО)
director, Engineering Technology — начальник управления проектно-конструкторских работ (МО)
director, Environmental and Life Sciences — начальник управления экологических и биологических наук (МО)
director, Equipment Applications — начальник управления по изучению применения техники (в войсках)
director, Facilities Engineering — начальник инженерно-строительного управления
director, Far East/Middle East/Southern Hemisphere Affairs — начальник управления стран Дальнего Востока, Среднего Востока и Южного полушария (МО)
director, Federal Bureau of Investigation — директор ФБР
director, Field Maintenance — начальник службы полевого технического обслуживания и ремонта
director, Foreign Military Rights Affairs — начальник управления по делам прав иностранных государств в военной области (МО)
director, General Purpose Forces Policy — начальник управления разработки вопросов строительства сил общего назначения
director, Health Resources — начальник управления ресурсов здравоохранения
director, Information Processing Technique — начальник управления систем обработки информации (МО)
director, Information Security — начальник управления обеспечения секретности информации (МО)
director, Information Systems — начальник управления АИС
director, Installations — начальник управления строительства
director, Intelligence Resources — начальник управления изучения ресурсов разведки (МО)
director, Inter-American Region — начальник управления по межамериканским делам
director, International Economic Affairs — начальник управления по международным экономическим делам (МО)
director, International Military Staff — начальник международного объединенного штаба (НАТО)
director, Joint Staff — начальник секретариата объединенного штаба (КНШ)
director, Joint Tactical Communications (TRI-TAC) Program — начальник отдела работ по программе использования единой тактической системы связи (ТРИ-ТАК)
director, Judge Advocate Division — начальник отдела военно-юридической службы (МП)
director, Land Warfare — начальник управления наземных систем оружия (МО)
director, Legislative Liaison — начальник отдела по связям с законодательными органами (ВВС)
director, Legislative Reference Service — начальник справочной юридической службы (МО)
director, Major Weapon Systems Acquisition — начальник управления закупок основных систем оружия (МО)
director, Marine Corps Reserve — начальник отдела по вопросам резерва МП
director, Materiel Acquisition Policy — начальник управления разработки планов закупок оружия и военной техники (МО)
director, Materiel Requirements — начальник отдела определения потребностей в оружии и военной технике
director, Medical Plans and Resources — начальник управления ресурсов и планов медицинского обеспечения (ВВС)
director, Military Assistance Office — Бр. начальник управления по оказанию военной помощи иностранным государствам (СВ)
director, Military Survey — Бр. начальник топографического управления (СВ)
director, Military Technology — начальник управления военной технологии (МО)
director, Military Vehicles and Engineering Establishment — Бр. начальник управления БМ и инженерной техники
director, National Intelligence Systems — начальник управления национальных систем разведки (МО)
director, NATO/European Affairs — начальник управления по делам НАТО и стран Европы (МО)
director, Naval Laboratories — начальник управления научно-исследовательских лабораторий ВМС
director, Near Eastern and South Asian Region — начальник управления стран Ближнего Востока и Южной Азии (МО)
director, Negotiations Policy — начальник управления разработки планов ведения переговоров (МО)
director, Net Assessment — начальник управления всесторонней оценки программ (МО)
director, NSA — директор АНБ
director, Offensive and Space Systems — начальник управления космических средств и систем наступательного оружия (МО)
director, Office of Congressional Travel/Security Clearances — начальник отдела организации поездок членов Конгресса и оформления допуска к секретным материалам (МО)
director, Office of Dependents Schools — начальник отдела по вопросам воспитания и образования детей военнослужащих (МО)
director, Office of Research and Administration — начальник управления НИР и административного обеспечения (МО)
director, Operations — начальник оперативного управления [отдела]
director, Personnel and Employment Service-Washington — начальник отдела кадров для гражданских служащих зоны Вашингтона (СВ)
director, Personnel Council — председатель совета по делам ЛС (ВВС)
director, Personnel Plans — начальник управления планирования подготовки ЛС (ВВС)
director, Personnel Programs — начальник управления разработки программ использования ЛС (ВВС)
director, Planning and Health Policy Analysis — начальник управления планирования и развития здравоохранения (МО)
director, Planning and Requirements Review — начальник управления планирования и анализа потребностей (МО)
director, Planning — начальник управления планирования (МО)
director, Plans and Programs — начальник управления разработки планов и программ
director, Policy Research — начальник управления политических исследований (МО)
director, Program Control and Administration — начальник управления по административным вопросам и контролю за выполнением программ
director, Program Management — начальник управления по руководству разработкой программ (МО)
director, R&D and Procurement — начальник отдела НИОКР и заготовок
director, Religious Education — руководитель отделения [секции] религиозного образования (СВ)
director, Resource Management Office — начальник отдела управления ресурсами (СВ)
director, Royal Aircraft Establishment — Бр. директор НИЦ авиационной техники
director, Royal Armament R&D Establishment — Бр. директор НИЦ вооружений
director, Royal Armored Corps — Бр. начальник бронетанковых войск
director, Royal Artillery — Бр. начальник артиллерийского управления
director, Royal Signals and Radar Establishments — Бр. директор НИЦ средств связи и РЛ техники
director, SALT/Arms Control Support Group — начальник группы обеспечения переговоров в рамках ОСВ по контролю над вооружениями
director, Security Assistance Plans and Programs — начальник управления разработки планов и программ военной помощи иностранным государствам
director, Security Plans and Programs — начальник управления разработки планов и программ обеспечения безопасности (МО)
director, Space Activities Office — начальник управления космических программ (МО)
director, Space and Building Management Service-Washington — начальник службы эксплуатации объектов зоны Вашингтона (СВ)
director, Space Systems — начальник управления космических систем (ВВС)
director, Special Projects — начальник управления специальных проектов (МО)
director, Special Studies — начальник управления специальных НИР
director, Special Weapons — начальник управления специальных видов оружия
director, Strategic and Theater C2 Systems — начальник управления разработки систем руководства и управления ВС в стратегическом масштабе и на ТВД
director, Strategic Forces Policy — начальник управления разработки вопросов развития стратегических сил
director, Strategic Planning — начальник отдела стратегического планирования
director, Strategic Plans — начальник отдела стратегического планирования
director, Strategic Policy — начальник управления разработки стратегических проблем (МО)
director, Strategic Technology — начальник управления разработки стратегических систем оружия (МО)
director, Studies and Analyses Staff — начальник отдела исследований и анализа (СВ)
director, Surveillance and Warning — начальник управления систем наблюдения и оповещения (МО)
director, Tactical Intelligence Systems — начальник управления тактических систем разведки (МО)
director, Tactical Technology — начальник управления разработки тактических систем оружия (МО)
director, Technology and Arms Transfer Policy — начальник управления разработки основ передачи военной технологии и вооружений
director, Technology Trade — начальник управления по торговым операциям в области технологии
director, Territorial Army and Cadets — Бр. начальник управления территориальной армии и кадетских организаций
director, Theater Nuclear Force Policy — начальник управления разработки программ развития ядерных сил на ТВД
director, Underwater Weapons Projects — Бр. начальник отдела разработки проектов подводного оружия
director, USAF Judiciary — начальник отдела судопроизводства ВВС США
director, Washington Headquarters Services — начальник административноштабной службы зоны Вашингтона
director, Weapons (Production) — Бр. начальник управления по производству систем оружия
director, Women's RAF — Бр. начальник женской вспомогательной службы ВВС
director, Women's Royal Naval Service — Бр. начальник женской вспомогательной службы ВМС
Executive director, Industrial Security — начальник управления обеспечения сохранения военной тайны на промышленных предприятиях (МО)
Executive director, Quality Assurance — начальник управления обеспечения качества (продукции МО)
Executive director, Technical and Logistics Services — начальник управления служб МТО (МО)
Managing director, Royal Ordnance Factories — Бр. начальник управления военных заводов
Principal director Office of the Deputy Under-Secretary, Policy Planning — начальник управления [первый помощник заместителя МО] по планированию военно-политических программ
Staff director, Installation Services and Environmental Protection — начальник управления обслуживания объектов и защиты окружающей среды (МО)
Staff director, Management Review — начальник управления анализа организационных проблем (МО)
Staff director, Small and Disadvantaged Business Utilization — начальник управления по связям с мелкими и льготными предприятиями (МО)
Vice director, Management and Operations Defense Intelligence Agency — первый заместитель начальника разведывательного управления МО по вопросам руководства операциями
— fire control director -
95 work
1) работа; труд; действие; функционирование2) обработка3) обрабатываемая заготовка; обрабатываемая деталь; обрабатываемое изделие4) механизм5) конструкция6) мн. ч. завод; фабрика; мастерские; технические сооружения; строительные работы7) мн. ч. работающие части механизма, подвижные органы механизма8) работать; обрабатывать9) действовать, двигаться, поворачиваться ( о подвижных частях механизмов)10) коробиться•work performed with materials in a smaller quantity — работа, выполненная с недостаточным использованием материалов
work performed without the necessary diligence — работа, выполненная небрежно
work which is not in accordance with specifications — работа, не соответствующая техническим требованиям
work which is not in accordance with the requirements of the engineer — работа, не отвечающая требованиям инженера
to work down — 1) осаживать ( вниз); оседать 2) обрабатывать на меньший размер
to work in — вделывать, вмонтировать
to work into — углубляться во что-либо, уходить внутрь
to work off — 1) соскакивать, соскальзывать ( во время работы) 2) снимать (напр. стружку)
to work on — действовать на что-либо, оказывать влияние на что-либо
to work out — 1) разрабатывать (план, проект) 2) вырабатывать (что-либо) из чего-либо (напр. вытачивать, выстрагивать, выфрезеровывать) 3) выскакивать, выпадать во время работы
to work over — обрабатывать вторично, перерабатывать, подвергать переработке
to work upon — действовать на что-либо, оказывать влияние на что-либо
- work executed - work in process - work of acceleration - work of deformation - work of ideal cycle - work of resistance - work on arbour - works under way - access to works - actual progress of works - amendment of the date of completion of works - amount of the executed works - applied work - asphalt work - assessment of works - auxiliary work - bank work - bargain work - beat-cob work - betterment work - black and white work - bluff work - bonus work - bosh brick work - branch work - branched work - bright work - carpenter's work - cast steel work - cessation of works - chased work - check of works - checking of works - chequer work - chequered work - cindering work - civil works - civil and erection works - clay work - clearing work - commencement of works - completed works - completion of works - concrete work - diversion work - condensing works - construction works - consumed work - continuous execution of works - contract works - cost of works - cost of uncovering works - covered-up works - date of commencement of works - date of completion of works - day-to-day work - day wage work - dead work - defective works - delay in completion of works - delayed completion of works - demolition works - description of works - design and survey works - desilting works - diaper work of bricklaying - drainage work - dredge work - dressing works - drove work - earth works - effective work - embossed work - emergency works - engineering works - erecting works - erection works - examination of works - excavation works - execution of works - expected period of works - extension of the time for completion of works - external work - face work - fascine work - field works - finely finished work - finishing work - fitter's works - flat trellis work - float work - forming work - forthcoming works - frosted rustic work - gauge work - gauged work - geologic works - geological works - grading works - gunite work - heading work - health work - hot work - hydro-meteorologic works - hydro-meteorological works - inadequate progress of works - incomplete lattice work - indicated work - inlaid work - inspection of works - installation work - intake works - irrigation works - jack works - jobbing work - joggle work - ladder work - line work - link work - locksmith's work - machine work - main works - maintenance work - management of works - maritime works - metal work - milling work - motion work - multiple lattice work - nature of works - neat work - negative work - night work - no-load work - odd works - on the site works - order of execution of works - outlet work - outstanding works - overhead works - panel work - partially completed works - part of works - paternoster work - period of works - period of execution of works - permanent works - pilot-scale work - plane frame work - planer work - pneumatic work - port work - portion of works - pottery work - precision work - preliminary works - preparatory works - pressure cementing work - programme of works - progress of works - proper execution of works - prospecting works - public works - pump works - quantity of works - rag work - R and D work - random work - range work - reclamation work - recoverable-strain work - recuperated work - reflected work - reliability of works - relief work - remedial works - repair work - repairing work - required work - research work - resumption of works - retaining works - reticulated work - right of access to works - river training works - rustic work - safety of works - schedule of works - scope of work - shaper work - sheet metal work - shift work - smith and founder work - spillway works - starting work - step-by-step check of works - step-by-step checking of works - stick and rag work - stoppage of works - subcontract works - submarine work - substituted works - sufficiency of works - supervision for works - supervision for of works - survey work - survey and research works - suspension of works - taking over of works - task work - temporary work - test work - test-hole work - three-coat work - through-carved work - time for completion of works - timely completion of works - tool work - topiary work - topographic works - topographical works - track work - treatment works - trellis work - trench work - trestle work - turning work - uncompleted works - uncovering of works - upon completion of works - variations in works - variations of works - volume of works - wiring work - X-ray workto complete works (in the time stipulated in the contract) — завершать работы (в срок, оговорённый в контракте)
* * *1. работа2. изделие3. обработка4. возводимый объект (строительства) ( по подрядному договору); конструкция, сооружение5. работа, мощность6. pl сооружение, сооружения7. pl завод, фабрика, мастерскиеwork above ground — наземные работы ( в отличие от подземных и подводных); работы, производимые на поверхности земли
work below ground ( level) — подземные работы
work carried out on site — работы, выполненные на стройплощадке
work done in sections — работа, выполненная отдельными секциями [частями]
work in open excavations — работы в открытых выемках [горных выработках]
work in progress — (строительные) работы в стадии выполнения, выполняемые [производимые] (строительные) работы; объект в стадии строительства
work in water — работы, производимые в воде [под водой]
work near water — работы, производимые близ водоёмов или рек
- work of deformationwork on schedule — работы в процессе выполнения ( по графику); работы, предусмотренные планом [графиком]
- work of external forces
- work of internal forces
- above-ground works
- additional work
- agricultural works
- alteration work
- ashlar work
- auxiliary work
- avalanche baffle works
- axed work
- backfill work
- backing masonry work
- bag work
- bench work
- block work
- brewery works
- brick work
- broken-color work
- brush work
- building work
- building site works
- carcass work
- carpenter's work
- cement works
- chemical production works
- civil engineering work
- coast protection works
- cob work
- completed work
- complicated building work
- concrete work
- concrete block masonry work
- concrete masonry work
- constructional work
- construction work
- continuous shift work
- contract work
- coursed work
- crib work
- day work
- dead work
- defective work
- defence works
- deformation work
- demolition work
- development work
- diver's works
- diversion works
- donkey work
- drainage works
- earth work
- earth-moving work
- elastic work of a material
- electric work
- electricity production works
- emergency work
- enclosed construction works
- engineering works
- erection work
- erosion protection works
- excavation works
- experimental work
- external work
- extra work
- facing work
- factory work
- fascine work
- finishing work
- finish work
- floating construction works
- flood-control works
- flood-protection works
- floor work
- floor-and-wall tiling work
- floor covering work
- food industry production work
- foundation work
- funerary works
- further day's work
- gas works
- gauged work
- glazed work
- glazier's work
- half-plain work
- hammered work
- hand work
- handy work
- heat insulation work
- heavy work
- highly mechanized work
- hot work
- in-fill masonry work
- innovative construction work
- insulating work
- intake works
- internal work in the system
- ironmongery work
- joinery work
- land retention works
- landslide protection works
- loading works
- manual work
- marine works
- metallurgical processing works
- night work
- nonconforming work
- office work
- off-the-site work
- one-coat work
- open-air intake works
- open construction works
- ornamental works
- ornate work
- outlet works
- overhang work
- overhead work
- permanent works up to ground level
- petroleum extraction works
- piece work
- pitched work
- plaster work
- plumbing work
- power production works
- precast works
- production works
- promotion work
- protection works
- protective works
- public works
- random ashlar work
- refurbishment work
- refuse disposal works
- refuse incineration works
- regulation works
- reinforced concrete work
- research work
- reticulated work
- road transport works
- roof tiling work
- rubble ashlar masonry work
- sanitary works
- sea defence works
- sediment exclusion works
- sewage disposal works
- single construction works
- smillage-axed work
- solid plaster work
- steel construction works
- steel works
- steel plate work
- structural restoration work
- surface transport works
- temporary works
- textile work
- three-coat work
- tiling work
- training works
- transport works
- treatment works
- two-coat work
- underground work
- underwater work
- unloading works
- vermiculated work
- virtual work
- waste disposal works
- water works
- water treatment works -
96 costs
сущ. затраты, издержки, расходы Syn: outgo, outgoing, outlay, expenses Затраты accounting ~ затраты на ведение бухгалтерского учета acquisition ~ расходы на привлечение новых страхователей actual ~ фактические издержки adjustment ~ издержки регулирования administration ~ административные расходы administrative ~ административные расходы advertising ~ затраты на рекламу allocate ~ распределять затраты assign ~ распределять затраты at factor ~ при факторных издержках auditing ~ затраты на проведение ревизии average ~ средние издержки average fixed ~ средние постоянные издержки average production ~ средние издержки производства average total ~ средние валовые затраты average variable ~ средние переменные затраты average variable ~ средние переменные издержки avoidable ~ устранимые издержки award ~ присуждать судебные издержки betterment ~ затраты на повышение ценности собственности bookkeeping ~ затраты на ведение бухгалтерского учета borrowing ~ проценты по займам borrowing ~ расходы по займам brokerage ~ затраты на куртаж budget ~ бюджетные затраты budgeted current standard ~ сметные текущие нормативные издержки budgeted target ~ плановые сметные издержки building ~ затраты на строительство building maintenance ~ затраты на материально-техническое обеспечение строительства business ~ эксплуатационные расходы calculate ~ вычислять издержки calculated ~ вычисленные издержки capacity ~ издержки производства при полном использовании производственных возможностей carriage ~ транспортные расходы cash plant ~ производственные затраты наличными charge with ~ взыскивать издержки clearance ~ затраты на урегулирование претензий closing ~ затраты на аннулирование контракта collection ~ затраты на инкассирование construction and operating ~ затраты на строительство и эксплуатацию construction ~ затраты на строительство conversion ~ затраты, связанные с переходом на выпуск новой продукции costs издержки ~ расходы ~ судебные издержки ~ судебные расходы ~ in criminal case издержки ведения уголовного дела ~ in full полные издержки ~ of bankruptcy издержки банкротства ~ of completion затраты на выполнение работы ~ of discharge затраты на разгрузку ~ of forward cover бирж. затраты на срочное покрытие ~ of litigation издержки гражданского судебного спора ~ of management административные расходы ~ of queue вчт. потери вследствие ожидания в очереди ~ of recourse юр. затраты на регресс ~ of research and development затраты на научно-исследовательские и опытно-конструкторские работы current ~ текущие издержки decision as to ~ определение суда в отношении издержек deduct ~ удерживать затраты defray ~ нести расходы defray ~ покрывать издержки degressive ~ пропорционально уменьшающиеся затраты degressive ~ пропорционально уменьшающиеся расходы demolition ~ затраты на снос здания development ~ затраты на освоение development ~ затраты на строительство differential ~ дополнительные издержки differential ~ приростные издержки differential ~ удельные переменные издержки direct ~ непосредственные расходы direct ~ переменные затраты direct ~ переменные издержки direct ~ прямые затраты direct ~ прямые издержки discounting ~ издержки дисконтирования distribute ~ распределять затраты distribution ~ издержки обращения distribution ~ издержки сбыта продукции distribution ~ издержки торговых предприятий divorce ~ судебные издержки развода drainage ~ расходы на осушение election ~ затраты на проведение выборов employment ~ затраты на содержание персонала entertainment ~ представительские расходы establishment ~ учредительские расходы excess ~ чрезмерные расходы execution ~ расходы на исполнение extension ~ затраты на расширение предприятия external ~ внешние расходы extra ~ дополнительные расходы extraordinary ~ чрезвычайные расходы factory overhead ~ накладные расходы предприятия financing ~ затраты на финансирование fire extinguishing ~ затраты на тушение пожара fixed ~ постоянные затраты fixed ~ постоянные издержки flotation ~ стоимость выпуска новых акций flotation ~ стоимость выпуска новых облигаций formation ~ затраты на учреждение forward cover ~ бирж. затраты на срочное покрытие forward cover ~ бирж. затраты на форвардное покрытие freight ~ стоимость фрахта funeral ~ расходы на похороны general ~ общие затраты general ~ общие издержки gross ~ валовые издержки handling ~ стоимость погрузочно-разгрузочных работ hauling ~ транс. транспортные расходы hourly wage ~ эк.произ. затраты на почасовую заработную плату implicit ~ вмененные издержки incidental ~ побочные затраты incidental ~ случайные расходы included ~ учтенные расходы income-related ~ затраты, связанные с доходом increased ~ возросшие издержки incremental ~ дополнительные издержки incremental ~ приростные издержки indirect ~ косвенные издержки indirect operating ~ косвенные эксплуатационные издержки initial ~ начальные расходы initial ~ первоначальные издержки inspection ~ затраты на приемочный контроль installation ~ затраты на монтаж insurance ~ страховые издержки interest ~ затраты на выплату процентов internal ~ внутрифирменние издержки internal failure ~ внутренние издержки вследствие отказа issue ~ затраты на эмиссию issuing ~ затраты на выпуск ценных бумаг joint ~ затраты на транспортировку в оба конца joint ~ издержки комплексного производства joint ~ издержки совместного производства joint ~ общезаводские издержки при многономенклатурном производстве labour ~ затраты на оплату труда labour ~ расходы на рабочую силу labour ~ стоимость рабочей силы law ~ расходы на судебный процесс law ~ судебные издержки legal ~ судебные издержки licence ~ затраты на лицензию liquidation ~ стоимость ликвидации litigation ~ судебные издержки maintenance ~ стоимость технического обслуживания manpower ~ стоимость рабочей силы manufacturing ~ общезаводские накладные расходы manufacturing ~ стоимость производства marginal ~ маржинальные издержки marginal ~ предельные издержки marginal ~ приростные издержки marketing ~ издержки обращения marketing ~ издержки сбыта marketing ~ маркетинговые затраты meet ~ покрывать расходы minimum ~ минимальные затраты mixed ~ комбинированные затраты mortgaging ~ ипотечные издержки new business ~ затраты на новую фирму nonrecurring ~ разовые затраты once-and-for-all ~ разовые затраты operating ~ текущие расходы, эксплуатационные расходы operating ~ эксплуатационные затраты operating ~ вчт. эксплуатационные расходы operating: ~ текущий;
operating costs текущие расходы;
эксплуатационные расходы operational ~ эксплуатационные затраты operational: ~ относящийся к действию, работе;
operational costs расходы по эксплуатации( оборудования и т. п.) organization ~ административные расходы original ~ первоначальные издержки other indirect ~ прочие косвенные расходы packaging ~ затраты на упаковку packaging ~ расходы по упаковке packing ~ расходы на упаковку packing ~ стоимость упаковки pay ~ оплачивать издержки pension ~ затраты на пенсионное обеспечение period ~ затраты за отчетный период period ~ издержки за отчетный период plaintiff's ~ издержки истца port ~ портовые расходы preliminary ~ предварительные затраты prepaid ~ предварительно оплаченные расходы prime ~ основные расходы processing ~ вчт. затраты на обработку production ~ издержки производства progressive ~ затраты, способствующие росту эффективности производственных факторов progressive fixed ~ постоянные затраты, способствующие росту эффективности производственных факторов promotional ~ затраты на продвижение товара на рынок promotional ~ затраты на рекламно-пропагандистскую деятельность property development ~ стоимость строительных работ publicity ~ расходы на рекламу rebuilding ~ затраты на реконструкцию recovery ~ затраты на инкасацию reduce ~ сокращать затраты relocation ~ затраты на переезд removal ~ издержки ликвидации объекта основного капитала rent ~ затраты на арендную плату rent ~ затраты на квартирную плату reorganization ~ затраты на реорганизацию repair ~ затраты на ремонт repatriation ~ затраты на репатриацию research ~ затраты на научные исследования reserve ~ ограничивать расходы running ~ эксплуатационные расходы running-in ~ затраты на приработку sales promotion ~ затраты на стимулирование сбыта scheduled ~ нормативные издержки scheduled ~ стоимостные нормы selling ~ торговые издержки semivariable ~ полупеременные издержки share ~ распределять затраты shipping ~ затраты на транспортировку site ~ затраты на подготовку строительной площадки site ~ затраты на подготовку строительства site ~ затраты на подготовку участка к застройке social ~ общественные затраты social security ~ затраты на социальное обеспечение sorting ~ затраты на сортировку special ~ специальные затраты specified ~ издержки производства конкретных изделий staff ~ затраты на содержание персонала stamp ~ затраты на пломбирование stamp ~ затраты на штемпелевание start-up ~ затраты на ввод в действие start-up ~ затраты на запуск в производство start-up ~ издержки освоения нового предприятия start-up ~ издержки подготовки производства starting ~ затраты, связанные с пуском производства starting ~ издержки, связанные с пуском производства stevedoring ~ стоимость погрузки или разгрузки корабля storage ~ плата за хранение storage ~ складские расходы stowage ~ стоимость укладки или хранения на складе supplementary ~ дополнительные затраты tax the ~ таксировать судебные издержки total ~ общие издержки total production ~ суммарные издержки производства transaction ~ операционные издержки transport ~ транспортные расходы transportation ~ транспортные расходы undue ~ непросроченные издержки unforeseen ~ непредвиденные затраты wage ~ затраты на заработную плату with ~ вместе с судебными издержками working ~ эксплуатационные затраты works overhead ~ накладные расходы предприятия -
97 CMT
1) Общая лексика: hum. сокр. Charcot Marie Tooth, Crisis Management Team (SEIC), Corporate Translation Management2) Спорт: Custom Maps Tournament3) Военный термин: Common Maintenance Truck, Critical Mobile Target, code matching technique, coordination management team, crisis management team4) Техника: cadmium-mercury telluride, coded mask telescope, constant mesh transmission, core makeup tank, corrected mean temperature, Construction management team( Группа управления строительством) (Чайво, Сахалин)5) Сельское хозяйство: California mastitis test6) Шутливое выражение: Color Me Terrified, Country Music Trash7) Биржевой термин: Constant Maturity Treasury8) Грубое выражение: C More Trisha, Chicks Music Television9) Металлургия: Cold Metal Transfer10) Телекоммуникации: Commercial Metering Transponder11) Сокращение: Cadmium Mercury Telluride (chemical abbreviation CdHgTe), Compulsory Military Training, Counter Mine Training, Critical Military Target, controlled manufacturing technique12) Текстиль: (сокр. от " Cut, Make and Trim ")торгующая фирма, поставляющая по контракту швейной фирме весь крой изделий и необходимую фурнитуру13) Физиология: Charcot Marie Tooth14) Вычислительная техника: cassette magnetic tape, connection management, кассета с магнитной лентой, Connection ManagemenT (FDDI)15) Нефть: cement, Circumfeгential Microsonic Tool16) Сварка: холодный перенос металла18) Деловая лексика: Cut Make And Trim19) SAP. Catalogue Management Tool20) Глоссарий компании Сахалин Энерджи: construction management team21) Образование: Connecticut Mastery Test23) Должность: Certified Massage Therapist, Coach Mentor Tutor24) Программное обеспечение: Card Management Tool25) Федеральное бюро расследований: Communist Trotskyism26) Международная торговля: Creative Marketing Techniques -
98 cmt
1) Общая лексика: hum. сокр. Charcot Marie Tooth, Crisis Management Team (SEIC), Corporate Translation Management2) Спорт: Custom Maps Tournament3) Военный термин: Common Maintenance Truck, Critical Mobile Target, code matching technique, coordination management team, crisis management team4) Техника: cadmium-mercury telluride, coded mask telescope, constant mesh transmission, core makeup tank, corrected mean temperature, Construction management team( Группа управления строительством) (Чайво, Сахалин)5) Сельское хозяйство: California mastitis test6) Шутливое выражение: Color Me Terrified, Country Music Trash7) Биржевой термин: Constant Maturity Treasury8) Грубое выражение: C More Trisha, Chicks Music Television9) Металлургия: Cold Metal Transfer10) Телекоммуникации: Commercial Metering Transponder11) Сокращение: Cadmium Mercury Telluride (chemical abbreviation CdHgTe), Compulsory Military Training, Counter Mine Training, Critical Military Target, controlled manufacturing technique12) Текстиль: (сокр. от " Cut, Make and Trim ")торгующая фирма, поставляющая по контракту швейной фирме весь крой изделий и необходимую фурнитуру13) Физиология: Charcot Marie Tooth14) Вычислительная техника: cassette magnetic tape, connection management, кассета с магнитной лентой, Connection ManagemenT (FDDI)15) Нефть: cement, Circumfeгential Microsonic Tool16) Сварка: холодный перенос металла18) Деловая лексика: Cut Make And Trim19) SAP. Catalogue Management Tool20) Глоссарий компании Сахалин Энерджи: construction management team21) Образование: Connecticut Mastery Test23) Должность: Certified Massage Therapist, Coach Mentor Tutor24) Программное обеспечение: Card Management Tool25) Федеральное бюро расследований: Communist Trotskyism26) Международная торговля: Creative Marketing Techniques -
99 material
1) материал; мн. ч. грунты; материалы2) материальный, вещественный•material retained on sieve — остаток на сите, надрешётный продукт
- abrasive material - active material - additional materials - adsorbing material - alternate material - antirot material - asbestos-containing construction materials - auxiliary materials - backfilling material - binding material - biostatic material - bituminous road materials - blasting material - brittle material - building materials - bulk material - cartographic materials - cartographical materials - cementing material - check of design material - coating material - constructional materials - consumption of materials - contractor's materials - corroding material - customer's materials - defective materials - delivery of materials - description of materials by weight - direct materials - durable material - emulsified bituminous materials - everyday need for materials - excavated material - expendable materials - experimental constructional material - explosive material - filter material - fireproof material - fire-resistant material - flux material - foam material - frostproof material - geologic materials - geological materials - geophysic materials - geophysical materials - granular materials - graphic material - graphical material - hazardous material - heat-insulating material - high grade material - hydro-geologic materials - hydro-geological materials - import materials - improper materials - indirect material - inflammable material - insulating materials - intrusion material - ion-exchange material - jointing material - lack of materials - lining material - list of materials - load transfer material - local building materials - locally manufactured materials - loose material - low-grade material - manufactured constructional materials - mismatched material - need for materials - nonused material - operational materials - parent material - patching material - paving material - procurement of materials - qualitative roofing material - quality of materials - radioactive material - raw material - refractory material - replacement of imported construction materials - required materials - roofing materials - rough material - sandwich material - sealing material - separation material - sound-damping material - source material - spongy material - standard material - substandard material - topographic material - topographical material - transportation of materials - utilization of materials - waterproofing material - written materialto damage construction materials during transportation — повредить строительные материалы во время транспортировки
* * *1. материал, вещество2. грунт3. материальный, вещественный- abrasion-resisting materialmaterials by structural properties — материалы, классифицируемые по структурным свойствам
- abrasive material
- absorbent material
- acoustic material
- anisotropic material
- architectural constructional materials
- architectural construction materials
- argillaceous material
- artificial pozzolanic material
- backfilling material
- backing material
- bagged material
- ballast material
- binding material
- bituminous materials
- bonding material
- boxing material
- brittle material
- building materials
- calcareous material
- cellular material
- cement-bound granular material
- cementing material
- ceramic materials
- clayey materials
- coated material
- coating material
- combustible material
- combustible building materials
- composite material
- concrete materials
- concrete-making materials
- concrete repair materials
- constituent materials of concrete
- construction materials
- corrugated sheet material
- damping material
- dampproofing material
- defective material
- ductile material
- durable material
- engineering materials
- excavated material
- fast-setting repair material
- faulty material
- fiber reinforced material
- fill material
- filter material
- finishing material
- fire retarding material
- flexible sheet material
- fluid material
- foamed-in-place acoustical materials
- form material
- frost-free material
- graded material
- granular material
- granular subbase material
- gritting materials
- hazardous material
- heat insulating material
- high-grade materials
- highly insulative material
- high insulative material
- incombustible material
- industrial materials
- inorganic material
- insulating materials
- isotropic material
- jointing material
- joint-sealing material
- lagging materials
- laminated material
- lime-containing material
- linear-elastic material
- lining material
- load-bearing structural insulating material
- loose fill acoustical material
- loosely packed material
- low-tensile strength material
- maintenance patching material
- manufactured construction materials
- matrix material
- mineral fill material
- moisture-resistant insulating material
- natural mineral material
- near-by material
- noncombustible material
- nonconductive material
- noncreeping material
- nonhazardous material
- one-component material
- organic material
- original raw materials
- orthotropic material
- packaged material
- packaged dry concrete materials
- parent material
- phase change materials
- plastic material
- poultice material
- pozzolanic material
- prebagged material
- prebatched material
- radioactive material
- raw materials
- reactive silica material
- recycled material
- release material
- repair materials
- resilient materials
- restoration materials
- road materials
- rock material
- roofing material
- sealing material
- sheet acoustical material
- solar cell roofing material
- solid material
- sound material
- sound absorbent material
- sound-deadening material
- sound insulation material
- sparkle material
- sprayed-on material
- sticky material
- strain-hardening material
- structural materials
- synthetic material
- synthetic resinous material
- thermal insulating material
- toxic material
- trim materials
- unrefined raw materials
- vibration-damping material
- walling material
- waterproofing material
- waterproof material
- water-repellent material -
100 schedule
1) расписание; таблица3) опись; условие•- schedule of construction work - schedule of construction works - schedule of delivery of equipment - schedule of earthworks - schedule of working drawings - ahead of schedule - compliance with a schedule - construction schedule - departure from a schedule - design schedule - flow regulation schedule - fulfilment of a schedule - maintenance schedule - tentative schedule - time schedule - waste-water treatment schedule - work schedule* * *1. спецификация; список, опись2. расписание; график; календарный план, программа3. планировать, составлять план- schedule of price
- schedule of wages
- accelerated job schedule
- bar schedule
- beam schedule
- bending schedule
- construction schedule
- cutting schedule
- door schedule
- equipment schedule
- erection schedule
- job schedule
- manufacturing schedule
- operation schedule
- overlapping construction schedule
- payment schedule
- pipe schedule
- progress schedule
- rate schedule
- test schedule
- time schedule
- total construction schedule
- window schedule
- work schedule
См. также в других словарях:
Construction Maintenance and Allied Workers — C.M.A.W. Full name Construction, Maintenance and Allied Workers Bargaining Council Founded 2007 Members 6000 Country Canada Affiliation Canadian Labour Congress, Communications, Energy and Paperworkers Union of Canada … Wikipedia
Construction worker — Carpenter at work in Tennessee, June 1942 Occupation Activity sectors Construction Description Competencies Manual dex … Wikipedia
Construction durable — Cet article se veut seulement une approche succincte des principes généraux qui en définissent le concept, l historique et tente de définir le point d avancement de la démarche en France. Son auteur n ignore pas, en effet, que des pays comme le… … Wikipédia en Français
Construction surveying — (otherwise known as lay out or setting out ) is to stake out reference points and markers that will guide the construction of new structures such as roads or buildings. These markers are usually staked out according to a suitable coordinate… … Wikipedia
Construction Field Computing — is the use of handheld devices that augment the construction superintendent s ability to manage the operations on a construction site. These information appliances (IA) must be portable devices which can be carried or worn by the user, and have… … Wikipedia
Construction field computing — is the use of handheld devices that augment the construction superintendent s ability to manage the operations on a construction site. These information appliances (IA) must be portable devices which can be carried or worn by the user, and have… … Wikipedia
Construction Mechanic (US Navy) — Construction Mechanic Rating insignia Issued by: United States Navy Type Enlisted rating Abbreviation CM … Wikipedia
Construction of the World Trade Center — For the post 9/11 rebuilding and ongoing construction at the World Trade Center site, see World Trade Center site. The completed World Trade Center in March 2001 The construction of the World Trade Center was conceived as an urban renewal project … Wikipedia
Construction of the Trans-Alaska Pipeline System — The construction of the Trans Alaska Pipeline System was a massive undertaking involving tens of thousands of people often in extreme temperatures and conditions. Specialized construction techniques were pioneered to build the pipeline, most of… … Wikipedia
Maintenance of way — MOW redirects here. For other meanings, see MOW (disambiguation). Maintenance of way (often abbreviated as M of Way, MOW or MW) refers to the maintenance of railroad rights of way.cite web| url=http://trains.com/trn/glossary/default.aspx?list=4… … Wikipedia
Maintenance Bond — A type of surety bond purchased by a contractor that protects the owner of a completed construction project for a specified time period against defects and faults in materials, workmanship and design that could arise later if the project was done … Investment dictionary