Перевод: с русского на французский

с французского на русский

are+necessary

  • 1 зажимное устройство

    1. organe de serrage

     

    зажимное устройство
    Элемент(ы) зажима, необходимый(ые) для механической фиксации и электрического соединения проводника.
    [ ГОСТ Р 51324.1—2005]

    зажимной элемент
    Часть (и) зажима, необходимая для механического прижима и электрического соединения проводника (ов), включая части, которые требуются для обеспечения надлежащего давления контакта (приложение 1).
    [ ГОСТ Р 50043.1-92]

    EN

    clamping unit
    the part(s) of the terminal necessary for the mechanical clamping and the electrical connection of the conductor(s), including the parts which are necessary to ensure the correct contact pressure
    [IEV number 442-06-12]

    FR

    organe de serrage
    partie d'une borne nécessaire pour le serrage mécanique et la connexion électrique du (des) conducteur(s), y compris les parties qui sont nécessaires pour assurer une pression de contact correcte
    [IEV number 442-06-12]

    Тематики

    • вывод, зажим электрический

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > зажимное устройство

  • 2 абиотический фактор

    1. facteur abiotique

     

    абиотический фактор

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    abiotic factor
    Physical, chemical and other non-living environmental factors. They are essential for living plants and animals of an ecosystem, providing the essential elements and nutrients that are necessary for growth. The abiotic elements also include the climatic and pedologic components of the ecosystem. (Source: LBC / WRIGHT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > абиотический фактор

  • 3 щит управления электростанции (подстанции)

    1. tableau de conduite

     

    щит управления электростанции (подстанции)
    Совокупность пультов и панелей с устройствами управления, контроля, сигнализации и защиты электростанции (подстанции), расположенных в одном помещении.
    [ ГОСТ 24291-90]

    EN

    control board
    a board on which are fixed control devices which are necessary to control and/or display a substation or a system
    [IEV number 605-03-01]

    FR

    tableau de conduite
    panneau sur lequel sont montés les dispositifs nécessaires à la conduite et/ou à la surveillance d'un poste ou d'un réseau
    [IEV number 605-03-01]

    Тематики

    Синонимы

    • ЩУ

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > щит управления электростанции (подстанции)

  • 4 инфраструктура

    1. infrastructure

     

    инфраструктура

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    infrastructure
    The basic network or foundation of capital facilities or community investments which are necessary to support economic and community activities. (Source: LANDY)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > инфраструктура

  • 5 орган управления

    1. organe de manoeuvre
    2. organe de commande

     

    орган управления
    Часть системы аппарата управления, к которой прилагается извне усилие управления.
    МЭК 60050(441-15-22).
    Примечание. Орган управления может иметь форму рукоятки, ручки, нажимной кнопки, ролика, плунжера и т. п.
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]

    орган управления

    Часть приводного механизма, к которой прикладывается внешняя сила воздействия.
    Примечание - Орган управления может иметь форму ручки, кнопки, ролика, поршня и т.д.
    [ ГОСТ Р 52726-2007]

    орган управления
    Часть системы привода, подвергаемая внешнему силовому воздействию.
    Примечания
    1. Орган управления может иметь форму ручки, рукоятки, нажимной кнопки, ролика, плунжера и т.д.
    2. Есть несколько способов приведения в действие, которые не требуют внешнего силового воздействия, а только какого-либо действия.
    [ГОСТ ЕН 1070-2003]

    орган управления
    Часть системы управления, которая предназначена непосредственно для воздействия оператором, например путем нажатия.
    [ГОСТ Р ЕН 614-1-2003]

    орган управления

    Часть системы приведения в действие, которая принимает воздействие человека.
    [ ГОСТ Р МЭК 60447-2000]

    орган управления
    Часть системы приведения в действие, которая воспринимает воздействие человека (ГОСТ Р МЭК 60447).
    Примечание
    В настоящем стандарте орган управления в виде интерактивного экранного устройства отображения является частью этого устройства, которое представляет функцию органа управления.
    [ ГОСТ Р МЭК 60073-2000]

    орган управления
    Часть механизма прибора управления, на который оказывается вручную внешнее силовое воздействие.
    Примечание.
    Орган управления может иметь форму ручки, рукоятки, кнопки, ролика, плунжера и т.д.
    Некоторые органы управления не требуют воздействия внешней силы, а только какого-либо действия.
    [ ГОСТ Р МЭК 60204-1-2007]

    органы управления
    Ручки, переключатели, потенциометры и другие органы, служащие для включения и регулировки аппаратуры. Термин относится преимущественно к аналоговым приборам.
    [Система неразрушающего контроля. Виды (методы) и технология неразрушающего контроля. Термины и определения (справочное пособие). Москва 2003 г.]

    орган управления
    -
    [IEV number 442-04-14]

    средства оперирования
    -

    [Интент]

    EN

    actuator
    the part of the actuating system to which an external actuating force is applied
    NOTE – The actuator may take the form of a handle, knob, push-button, roller, plunger, etc.
    [IEV number 441-15-22]

    actuator
    part of a device to which an external manual action is to be applied
    NOTE 1 The actuator may take the form of a handle, knob, push-button, roller, plunger, etc.
    NOTE 2 There are some actuating means that do not require an external actuating force, but only an action.
    NOTE 3 See also 3.34.
    [IEC 60204-1 -2005]

    actuating member
    a part which is pulled, pushed, turned or otherwise moved to cause an operation of the switch
    [IEV number 442-04-14]

    FR

    organe de commande
    partie du mécanisme transmetteur à laquelle un effort extérieur de manoeuvre est appliqué
    NOTE – L'organe de commande peut prendre la forme d'une poignée, d'un bouton, d'un bouton-poussoir, d'une roulette, d'un plongeur, etc.
    [IEV number 441-15-22]

    organe de manoeuvre
    partie qui est tirée, poussée, tournée ou manipulée de toute autre façon pour provoquer le fonctionnement de l'interrupteur
    [IEV number 442-04-14]


    Аппарат должен оставаться механически действующим. Не допускается сваривание контактов, препятствующее операции размыкания при использовании нормальных средств оперирования.
    [ГОСТ  Р 50030.3-99 (МЭК  60947-3-99) ]

    ВДТ следует оперировать как при нормальной эксплуатации. Операции размыкания должны проводиться в следующем порядке:
    для первых 1000 циклов — с использованием ручных средств оперирования;
    ...
    [ ГОСТ Р 51326. 1-99 ( МЭК 61008-1-96)]

    Параллельные тексты EN-RU

    The operating means (for example, a handle) of the supply disconnecting device shall be easily accessible and located between 0,6 m and 1,9 m above the servicing level.
    [IEC 60204-1-2006]

    Органы управления, например, рукоятки аппаратов отключения питания, должны быть легко доступны и располагаться на высоте от 0,6 до 1,9 м от рабочей площадки.
    [Перевод Интент]

    Where the external operating means is not intended for emergency operations, it is recommended that it be coloured BLACK or GREY.
    [IEC 60204-1-2006]

    Если внешние средства оперирования не предназначены для выполнения действий при возникновении аварийных ситуаций, то рекомендуется, применять такие средства ЧЕРНОГО или СЕРОГО цвета.
    [Перевод Интент]

     

    1.2.2. Control devices

    Control devices must be:
    — clearly visible and identifiable and appropriately marked where necessary,
    — positioned for safe operation without hesitation or loss of time, and without ambiguity,
    — designed so that the movement of the control is consistent with its effect,
    — located outside the danger zones, except for certain controls where necessary, such as emergency stop, console for training of robots,
    — positioned so that their operation cannot cause additional risk,
    — designed or protected so that the desired effect, where a risk is involved, cannot occur without an intentional operation,
    — made so as to withstand foreseeable strain; particular attention must be paid to emergency stop devices liable to be subjected to considerable strain.

    1.2.2. Органы управления

    Органы управления должны быть:
    - четко видны, хорошо различимы и, где это необходимо, иметь соответствующее обозначение;
    - расположены так, чтобы ими можно было пользоваться без возникновения сомнений и потерь времени на выяснение их назначения;
    - сконструированы так, чтобы перемещение органа управления согласовывалось с их воздействием;
    - расположены вне опасных зон; исключение, где это необходимо, делается для определенных средств управления, таких, как средство экстренной остановки, пульт управления роботом;
    - расположены так, чтобы их использование не вызывало дополнительных рисков;
    - сконструированы или защищены так, чтобы в случаях, где возможно возникновение рисков, они не могли бы возникнуть без выполнения намеренных действий;
    - сделаны так, чтобы выдерживать предполагаемую нагрузку; при этом особое внимание уделяется органам аварийного останова, которые могут подвергаться значительным нагрузкам.

    Where a control is designed and constructed to perform several different actions, namely where there is no one-to-one correspondence (e.g. keyboards, etc.), the action to be performed must be clearly displayed and subject to confirmation where necessary.

    Если орган управления предназначен для выполнения разных действий, например, если в качестве органа управления используется клавиатура или аналогичное устройство, то должна выводиться четкая информация о предстоящем действии, и, если необходимо, должно выполняться подтверждение на выполнение такого действия.

    Controls must be so arranged that their layout, travel and resistance to operation are compatible with the action to be performed, taking account of ergonomic principles.

    Органы управления должны быть организованы таким образом, чтобы их расположение, перемещение их элементов и усилие, которое оператор затрачивает на их перемещение, соответствовали выполняемым операциям и принципам эргономики.

    Constraints due to the necessary or foreseeable use of personal protection equipment (such as footwear, gloves, etc.) must be taken into account.

    Необходимо учитывать скованность движений операторов при использовании необходимых или предусмотренных средств индивидуальной защиты (таких, как специальная обувь, перчатки и др.).

    Machinery must be fitted with indicators (dials, signals, etc.) as required for safe operation. The operator must be able to read them from the control position.

    Для обеспечения безопасной эксплуатации машинное оборудование должно быть оснащено индикаторами (циферблатами, устройствами сигнализации и т. д.). Оператор должен иметь возможность считывать их с места управления.

    From the main control position the operator must be able to ensure that there are no exposed persons in the danger zones.

    Находясь в главном пункте управления, оператор должен иметь возможность контролировать отсутствие незащищенных лиц.

    If this is impossible, the control system must be designed and constructed so that an acoustic and/ or visual warning signal is given whenever the machinery is about to start.

    Если это невозможно, то система управления должна быть разработана и изготовлена так, чтобы перед каждым пуском машинного оборудования подавался звуковой и/или световой предупредительный сигнал.

    The exposed person must have the time and the means to take rapid action to prevent the machinery starting up.

    [DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL]

    Незащищенное лицо должно иметь достаточно времени и средств для быстрого предотвращения пуска машинного оборудования.

    [Перевод Интент]

    Тематики

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > орган управления

  • 6 длительный допустимый ток

    1. courant permanent admissible, m
    2. courant admissible, m

     

    (длительный) допустимый ток
    Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
    [ ГОСТ Р МЭК 60050-826-2009]

    Этот ток обозначают IZ
    [ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]

    EN

    (continuous) current-carrying capacity
    ampacity (US)
    maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
    [IEV number 826-11-13]

    ampacity
    The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
    [National Electrical Cod]

    FR

    courant (permanent) admissible, m
    valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
    [IEV number 826-11-13]

    Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:

    • its insulation temperature rating;
    • conductor electrical properties for current;
    • frequency, in the case of alternating currents;
    • ability to dissipate heat, which depends on cable geometry and its surroundings;
    • ambient temperature.

    Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.

    The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.

    In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.

    Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.

    The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.

    For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.

    Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.

    When designing an electrical system, one will normally need to know the current rating for the following:

    Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.

    [http://en.wikipedia.org/wiki/Ampacity]

    Тематики

    • электротехника, основные понятия

    Синонимы

    EN

    DE

    • Dauerstrombelastbarkeit, f
    • Strombelastbarkeit, f

    FR

    • courant admissible, m
    • courant permanent admissible, m

    Русско-французский словарь нормативно-технической терминологии > длительный допустимый ток

  • 7 разведение устриц

    1. ostréiculture

     

    разведение устриц

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    oyster farming
    There are two types of oyster farming: suspension culture, in which oysters are grown off bottom, in floating trays, is a labor-intensive form of cultivation that requires continuous tending and cleaning of both gear and shellfish, and bottom culture, which is similar to conventional crop farming on land; it involves selecting areas of the sea floor that provide a natural food supply, necessary currents, minimum exposure to predators, and proper temperature and then "seeding" the bottom with shellfish stock that are left to grow to market size. Then they are harvested with a bottom drag from a boat. Both suspension culture and bottom culture depend on natural food supplies for growing the shellfish being raised. (Source: MSTF)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > разведение устриц

  • 8 удаление типографской краски

    1. désencrage

     

    удаление типографской краски

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    de-inking
    Series of processes by which various types of printing inks are removed from paper fibre pulp during the pre-processing and recycling of recovered paper products. Particularly necessary where high quality and whiteness of the finished product are required. (Source: GRAHAW)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > удаление типографской краски

  • 9 оборудование

    1. matériel, m
    2. machine
    3. équipement, m

     

    оборудование
    Совокупность связанных между собой частей или устройств, из которых по крайней мере одно движется, а также элементы привода, управления и энергетические узлы, которые предназначены для определенного применения, в частности для обработки, производства, перемещения или упаковки материала. К термину «оборудование» относят также машину и совокупность машин, которые так устроены и управляемы, что они функционируют как единое целое для достижения одной и той же цели.
    [ГОСТ ЕН 1070-2003]

    оборудование
    -

    [IEV number 151-11-25 ]

    оборудование
    Оснащение, материалы, приспособления, устройства, механизмы, приборы, инструменты и другие принадлежности, используемые в качестве частей электрической установки или в соединении с ней.
    [ ГОСТ Р МЭК 60204-1-2007]

    EN

    equipment
    single apparatus or set of devices or apparatuses, or the set of main devices of an installation, or all devices necessary to perform a specific task
    NOTE – Examples of equipment are a power transformer, the equipment of a substation, measuring equipment.
    [IEV number 151-11-25 ]

    equipment
    material, fittings, devices, components, appliances, fixtures, apparatus, and the like used as part of, or in connection with, the electrical equipment of machines
    [IEC 60204-1-2006]

    FR

    équipement, m
    matériel, m
    appareil unique ou ensemble de dispositifs ou appareils, ou ensemble des dispositifs principaux d'une installation, ou ensemble des dispositifs nécessaires à l'accomplissement d'une tâche particulière
    NOTE – Des exemples d’équipement ou de matériel sont un transformateur de puissance, l’équipement d’une sous-station, un équipement de mesure.
    [IEV number 151-11-25]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > оборудование

  • 10 регулирующий контроль

    1. contrôle réglementaire

     

    регулирующий контроль

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    regulatory control
    Government supervision over the obligations and rights of an industry or enterprise for the purpose of providing the public with services that are considered important, vital or necessary to most members of a community or area. (Source: DAM)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > регулирующий контроль

  • 11 торнадо

    1. tornade

     

    торнадо

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    tornado
    A rapidly rotating column of air developed around a very intense low-pressure centre. It is associated with a dark funnel-shaped cloud and with extremely violent winds (>300km/h) blowing in a counterclockwise spiral, but accompanied by violent downdraughts. The precise mechanisms are not fully understood but the following atmospheric conditions appear to be necessary for tornado development: a layer of warm moist air at low altitude; a layer of dry air at higher altitude with an inversion of temperature at about 1.000 m; a triggering mechanism, usually in the form of an active, intense cold front or solar heating of the ground which will create a vortex. (Source: WHIT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > торнадо

  • 12 химическое производство

    1. génie chimique

     

    химическое производство

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    chemical engineering
    The branch of engineering concerned with industrial manufacture of chemical products. It is a discipline in which the principles of mathematical, physical and natural sciences are used to solve problems in applied chemistry. Chemical engineers design, develop, and optimise processes and plants, operate them, manage personnel and capital, and conduct research necessary for new developments. Through their efforts, new petroleum products, plastics, agricultural chemicals, house-hold products, pharmaceuticals, electronic and advanced materials, photographic materials, chemical and biological compounds, various food and other products evolve. (Source: USTa)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > химическое производство

  • 13 электрооборудование

    1. matériel électrique, m
    2. matériel
    3. équipement

     

    электрооборудование
    Совокупность электротехнических изделий и (или) электротехнических устройств, предназначенных для выполнения заданной работы. Электрооборудование в зависимости от объекта установки имеет соответствующее наименование, например, электрооборудование автомобиля и др.
    [Макаров Е.Ф. Справочник по электрическим сетям 0,4-35 кВ и 110-1150 кВ]

    электрооборудование
    Совокупность электротехнических устройств, объединенных общими признаками.
    Примечание.
    Признаками объединения в зависимости от задачи могут быть: назначение, например, технологическое; условия применения, например, тропическое; принадлежность к объекту, например, станку, цеху.
    [ ГОСТ 18311-80]

    электрооборудование
    Любое оборудование, предназначенное для производства, преобразования, передачи, аккумулирования, распределения или потребления электрической энергии, например машины, трансформаторы, аппараты, измерительные приборы, устройства защиты, кабельная продукция, бытовые электроприборы
    (МЭС 826-07-01).
    [ ГОСТ Р МЭК 61140-2000]

    электрическое оборудование
    Оборудование, используемое для производства, преобразования, передачи, распределения или потребления электрической энергии.
    Примечание - Примерами электрического оборудования могут быть электрические машины, трансформаторы, коммутационная аппаратура и аппаратура управления, измерительные приборы, защитные устройства, электропроводки, электроприемники
    [ ГОСТ Р МЭК 60050-826-2009]

    электрооборудование
    Оборудование, предназначенное для производства, передачи и изменения характеристик электрической энергии, а также для её преобразования в другой вид энергии.
    К электрооборудованию нормативные и правовые документы относят электродвигатели, трансформаторы, коммутационную аппаратуру, аппаратуру управления, защитные устройства, измерительные приборы, кабельные изделия, бытовые электрические приборы и другие электротехнические изделия. Электрооборудование используют для производства электрической энергии, изменения её характеристик (напряжения, частоты, вида электрического тока и др.), передачи, распределения электроэнергии и, в конечном итоге, – для её преобразования в другой вид энергии. Электрооборудование, применяемое в электроустановках зданий, обычно предназначено для преобразования электрической энергии в механическую, тепловую и световую энергию, то есть оно представляет собой электроприёмники.
    [ http://www.volt-m.ru/glossary/letter/%DD/view/96/]

    N

    equipment
    single apparatus or set of devices or apparatuses, or the set of main devices of an installation, or all devices necessary to perform a specific task
    NOTE – Examples of equipment are a power transformer, the equipment of a substation, measuring equipment.
    [IEV number 151-11-25]

    electric equipment
    item used for such purposes as generation, conversion, transmission, distribution or utilization of electric energy, such as electric machines, transformers, switchgear and controlgear, measuring instruments, protective devices, wiring systems, current-using equipment
    [IEV number 826-16-01]

    FR

    équipement, m
    matériel, m
    appareil unique ou ensemble de dispositifs ou appareils, ou ensemble des dispositifs principaux d'une installation, ou ensemble des dispositifs nécessaires à l'accomplissement d'une tâche particulière
    NOTE – Des exemples d’équipement ou de matériel sont un transformateur de puissance, l’équipement d’une sous-station, un équipement de mesure.
    [IEV number 151-11-25]

    matériel électrique, m
    matériel utilisé pour la production, la transformation, le transport, la distribution ou l'utilisation de l'énergie électrique, tel que machine, transformateur, appareillage, appareil de mesure, dispositif de protection, canalisation électrique, matériels d'utilisation
    [IEV number 151-11-25]

    Тематики

    Синонимы

    EN

    DE

    FR

    Русско-французский словарь нормативно-технической терминологии > электрооборудование

См. также в других словарях:

  • necessary and proper clause — nec·es·sary and proper clause n often cap N&P&C [from the words of the clause]: the clause in Article I, Section 8 of the U.S. Constitution that empowers the Congress to make all laws necessary for executing its other powers and those of the… …   Law dictionary

  • necessary — adj. VERBS ▪ appear, be, prove, seem ▪ become ▪ remain ▪ make sth ▪ …   Collocations dictionary

  • necessary repairs — Such repairs by a lessee as are necessary for the use of the leased premises by the tenant for the purposes for which they were leased. Anno: 45 ALR 24, s. 106 ALR 1361 …   Ballentine's law dictionary

  • necessary rule — The rule of some jurisdictions in reference to the right of a grantee to an easement in a street or alley shown on a map or plat, where the conveyance to him is made with reference to such map or plat, that his right of user in the street or… …   Ballentine's law dictionary

  • Necessary Roughness (film) — Necessary Roughness Theatrical release poster Directed by Stan Dragoti Produced by …   Wikipedia

  • Necessary Evil Clothing — is a brand of Gothic and Alternative clothing designed and marketed by katesclothing.co.uk. Its aim is provide affordable alternative clothes and a wide range of styles.[1] Contents 1 Origins and Aims 2 Publicity …   Wikipedia

  • Necessary Noize — is a Kenyan hip hop group. Contents 1 Origins and Original Members 2 Growth 3 Collaborations 4 Awards …   Wikipedia

  • Necessary Evil (Salem album) — Necessary Evil Studio album by Salem Released June 19, 2007 …   Wikipedia

  • Necessary — Nec es*sa*ry, n.; pl. {Necessaries}. 1. A thing that is necessary or indispensable to some purpose; something that one can not do without; a requisite; an essential; used chiefly in the plural; as, the necessaries of life. [1913 Webster] 2. A… …   The Collaborative International Dictionary of English

  • Necessary Heartbreak —   …   Wikipedia

  • Necessary and sufficient condition — This article is about the formal terminology in logic. For causal meanings of the terms, see Causality. In logic, the words necessity and sufficiency refer to the implicational relationships between statements. The assertion that one statement is …   Wikipedia

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»