Перевод: с немецкого на русский

с русского на немецкий

taken

  • 41 Einschaltstrom

    1. пусковой ток

     

    пусковой ток
    -

    EN

    inrush current
    transient current associated with energizing of transformers, cables, reactors, etc
    [IEV number 448-11-30]

    inrush current
    Iin

    current occurring during the transient period from the moment of switching to the steady-state condition
    [IEC 60738-1, ed. 3.0 (2006-04)]


    starting current
    the steady-state r.m.s. current taken from the line over the starting period from zero speed to load speed with rated voltage and frequency applied
    [IEV number 411-48-18]

    FR

    courant d'appel
    courant transitoire associé à la mise sous tension des transformateurs, câbles, bobines d'inductance, etc
    [IEV number 448-11-30]


    courant de démarrage
    valeur efficace du courant en régime établi, absorbé par le moteur pendant la période de démarrage de la vitesse nulle jusqu'à la vitesse de charge minimale lorsqu'il est alimenté à la tension et à la fréquence assignées
    [IEV number 411-48-18]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Einschaltstrom

  • 42 Arbeitsspannung, f

    1. рабочее напряжение

     

    рабочее напряжение
    Максимальное напряжение, которому подвергается рассматриваемая часть прибора, когда прибор работает при его номинальном напряжении и в условиях нормальной работы.
    Примечания.

    1. Принимают во внимание различные положения управляющих и коммутационных устройств.
    2. Рабочее напряжение учитывает резонансные напряжения.
    3. При определении рабочего напряжения не принимают во внимание влияние переходных напряжений.
    [ ГОСТ Р 52161. 1-2004 ( МЭК 60335-1: 2001)]

    рабочее напряжение
    Значение фактического напряжения, подаваемого на действующий электронагреватель.
    [ ГОСТ Р МЭК 60050-426-2006]

    рабочее напряжение
    Наибольшее среднеквадратичное значение напряжения переменного или постоянного тока на любой конкретной изоляции, которое имеет место, когда на оборудование подают номинальное напряжение.
    Примечания.
    1. Переходные процессы не учитывают.
    2. Условия разомкнутой цепи и нормальные рабочие условия принимают во внимание.
    [ ГОСТ Р 52319-2005( МЭК 61010-1: 2001)]

    рабочее напряжение
    Максимальное среднее квадратическое значение постоянного или переменного напряжения на концах изоляционного материала при запитывании выключателя номинальным напряжением.
    Примечания
    1 Неустойчивостью пренебрегают.
    2 Как состояние открытой цепи, так и рабочее состояние не принимают во внимание
    [ ГОСТ Р 51324.2.1-99 (МЭК 60669-2-1-96)]

    EN

    working voltage
    highest r.m.s. value of the a.c. or d.c. voltage across any particular insulation which can occur when the equipment is supplied at rated voltage
    [IEV number 581-21-19]


    working voltage
    highest r.m.s. value of the AC or DC voltage across any particular insulation which can occur when the equipment is supplied at rated voltage
    NOTE 1 – Transients are disregarded.
    NOTE 2 – Both open circuit conditions and normal operating conditions are taken into account.
    [IEV number 851-12-31]

    FR

    tension de service
    valeur efficace la plus élevée de la tension en courant alternatif ou en courant continu à travers tout isolant particulier, pouvant se produire lorsque le matériel est alimenté à la tension assignée
    [IEV number 581-21-19]


    tension locale
    valeur efficace la plus élevée de la tension en courant alternatif ou continu qui peut apparaître à travers n'importe quelle isolation lorsqu'un matériel est alimenté sous la tension assignée
    NOTE 1 – Les surtensions transitoires sont négligées.
    NOTE 2 – Il est tenu compte à la fois des conditions à vide et des conditions normales de fonctionnement.
    [IEV number 851-12-31]

    Тематики

    EN

    DE

    • Arbeitsspannung, f

    FR

    Немецко-русский словарь нормативно-технической терминологии > Arbeitsspannung, f

  • 43 Dimension einer Grösse

    1. размерность физической величины

     

    размерность физической величины
    размерность величины

    Выражение в форме степенного одночлена, составленного из произведений символов основных физических величин в различных степенях и отражающее связь данной физической величины с физическими величинами, принятыми в данной системе величин за основные с коэффициентом пропорциональности, равным 1.
    Примечания
    1. Степени символов основных величин, входящих в одночлен, в зависимости от связи рассматриваемой физической величины с основными, могут быть целыми, дробными, положительными и отрицательными. Понятие размерность распространяется и на основные величины. Размерность основной величины в отношении самой себя равна единице, т.е. формула размерности основной величины совпадает с ее символом.
    2. В соответствии с международным стандартом ИСО 31/0, размерность величин следует обозначать знаком dim [2]. В системе величин LMT размерность величины.x будет: dim х = LlMmTt, где L, М, Т - символы, величин, принятых за основные (соответственно длины, массы, времени).
    [РМГ 29-99]

    EN

    dimension of a quantity
    quantity dimension
    dimension

    expression of the dependence of a quantity on the base quantities of a system of quantities as a product of powers of factors corresponding to the base quantities, omitting any numerical factor
    NOTE 1 – A power of a factor is the factor raised to an exponent. Each factor is the dimension of a base quantity.
    NOTE 2 – The conventional symbolic representation of the dimension of a base quantity is a single upper case letter in roman (upright) sans-serif type. The conventional symbolic representation of the dimension of a derived quantity is the product of powers of the dimensions of the base quantities according to the definition of the derived quantity. The dimension of a quantity Q is denoted by dim Q.
    NOTE 3 – In deriving the dimension of a quantity, no account is taken of its scalar, vector or tensor character.
    NOTE 4 – In a given system of quantities, – quantities of the same kind have the same dimension, – quantities of different dimensions are always of different kinds, and – quantities having the same dimension are not necessarily of the same kind. For example, in the ISQ, pressure and energy density (volumic energy) have the same dimension L–1MT–2. See also note 5.
    NOTE 5 – In the International System of Quantities (ISQ), the symbols representing the dimensions of the base quantities are:
    0543
    [IEV number 112-01-11]

    FR

    dimension, f
    dimension d'une grandeur, f

    expression de la dépendance d’une grandeur par rapport aux grandeurs de base d'un système de grandeurs sous la forme d'un produit de puissances de facteurs correspondant aux grandeurs de base, en omettant tout facteur numérique
    NOTE 1 – Une puissance d'un facteur est le facteur muni d'un exposant. Chaque facteur exprime la dimension d'une grandeur de base.
    NOTE 2 – Par convention, la représentation symbolique de la dimension d'une grandeur de base est une lettre majuscule unique en caractère romain (droit) sans empattement. Par convention, la représentation symbolique de la dimension d'une grandeur dérivée est le produit de puissances des dimensions des grandeurs de base conformément à la définition de la grandeur dérivée. La dimension de la grandeur Q est notée dim Q.
    NOTE 3 – Pour établir la dimension d'une grandeur, on ne tient pas compte du caractère scalaire, vectoriel ou tensoriel.
    NOTE 4 – Dans un système de grandeurs donné, – les grandeurs de même nature ont la même dimension, – des grandeurs de dimensions différentes sont toujours de nature différente, – des grandeurs ayant la même dimension ne sont pas nécessairement de même nature. Par exemple, dans l'ISQ, la pression et l'énergie volumique ont la même dimension L–1MT–2. Voir aussi la note 5.
    NOTE 5 – Dans le Système international de grandeurs (ISQ), les symboles représentant les dimensions des grandeurs de base sont:
    0544
    [IEV number 112-01-11]

    Тематики

    • метрология, основные понятия

    Синонимы

    EN

    DE

    FR

    • dimension d'une grandeur, f
    • dimension, f

    Немецко-русский словарь нормативно-технической терминологии > Dimension einer Grösse

  • 44 Dimension, f

    1. размерность физической величины

     

    размерность физической величины
    размерность величины

    Выражение в форме степенного одночлена, составленного из произведений символов основных физических величин в различных степенях и отражающее связь данной физической величины с физическими величинами, принятыми в данной системе величин за основные с коэффициентом пропорциональности, равным 1.
    Примечания
    1. Степени символов основных величин, входящих в одночлен, в зависимости от связи рассматриваемой физической величины с основными, могут быть целыми, дробными, положительными и отрицательными. Понятие размерность распространяется и на основные величины. Размерность основной величины в отношении самой себя равна единице, т.е. формула размерности основной величины совпадает с ее символом.
    2. В соответствии с международным стандартом ИСО 31/0, размерность величин следует обозначать знаком dim [2]. В системе величин LMT размерность величины.x будет: dim х = LlMmTt, где L, М, Т - символы, величин, принятых за основные (соответственно длины, массы, времени).
    [РМГ 29-99]

    EN

    dimension of a quantity
    quantity dimension
    dimension

    expression of the dependence of a quantity on the base quantities of a system of quantities as a product of powers of factors corresponding to the base quantities, omitting any numerical factor
    NOTE 1 – A power of a factor is the factor raised to an exponent. Each factor is the dimension of a base quantity.
    NOTE 2 – The conventional symbolic representation of the dimension of a base quantity is a single upper case letter in roman (upright) sans-serif type. The conventional symbolic representation of the dimension of a derived quantity is the product of powers of the dimensions of the base quantities according to the definition of the derived quantity. The dimension of a quantity Q is denoted by dim Q.
    NOTE 3 – In deriving the dimension of a quantity, no account is taken of its scalar, vector or tensor character.
    NOTE 4 – In a given system of quantities, – quantities of the same kind have the same dimension, – quantities of different dimensions are always of different kinds, and – quantities having the same dimension are not necessarily of the same kind. For example, in the ISQ, pressure and energy density (volumic energy) have the same dimension L–1MT–2. See also note 5.
    NOTE 5 – In the International System of Quantities (ISQ), the symbols representing the dimensions of the base quantities are:
    0543
    [IEV number 112-01-11]

    FR

    dimension, f
    dimension d'une grandeur, f

    expression de la dépendance d’une grandeur par rapport aux grandeurs de base d'un système de grandeurs sous la forme d'un produit de puissances de facteurs correspondant aux grandeurs de base, en omettant tout facteur numérique
    NOTE 1 – Une puissance d'un facteur est le facteur muni d'un exposant. Chaque facteur exprime la dimension d'une grandeur de base.
    NOTE 2 – Par convention, la représentation symbolique de la dimension d'une grandeur de base est une lettre majuscule unique en caractère romain (droit) sans empattement. Par convention, la représentation symbolique de la dimension d'une grandeur dérivée est le produit de puissances des dimensions des grandeurs de base conformément à la définition de la grandeur dérivée. La dimension de la grandeur Q est notée dim Q.
    NOTE 3 – Pour établir la dimension d'une grandeur, on ne tient pas compte du caractère scalaire, vectoriel ou tensoriel.
    NOTE 4 – Dans un système de grandeurs donné, – les grandeurs de même nature ont la même dimension, – des grandeurs de dimensions différentes sont toujours de nature différente, – des grandeurs ayant la même dimension ne sont pas nécessairement de même nature. Par exemple, dans l'ISQ, la pression et l'énergie volumique ont la même dimension L–1MT–2. Voir aussi la note 5.
    NOTE 5 – Dans le Système international de grandeurs (ISQ), les symboles représentant les dimensions des grandeurs de base sont:
    0544
    [IEV number 112-01-11]

    Тематики

    • метрология, основные понятия

    Синонимы

    EN

    DE

    FR

    • dimension d'une grandeur, f
    • dimension, f

    Немецко-русский словарь нормативно-технической терминологии > Dimension, f

  • 45 Größendimension, f

    1. размерность физической величины

     

    размерность физической величины
    размерность величины

    Выражение в форме степенного одночлена, составленного из произведений символов основных физических величин в различных степенях и отражающее связь данной физической величины с физическими величинами, принятыми в данной системе величин за основные с коэффициентом пропорциональности, равным 1.
    Примечания
    1. Степени символов основных величин, входящих в одночлен, в зависимости от связи рассматриваемой физической величины с основными, могут быть целыми, дробными, положительными и отрицательными. Понятие размерность распространяется и на основные величины. Размерность основной величины в отношении самой себя равна единице, т.е. формула размерности основной величины совпадает с ее символом.
    2. В соответствии с международным стандартом ИСО 31/0, размерность величин следует обозначать знаком dim [2]. В системе величин LMT размерность величины.x будет: dim х = LlMmTt, где L, М, Т - символы, величин, принятых за основные (соответственно длины, массы, времени).
    [РМГ 29-99]

    EN

    dimension of a quantity
    quantity dimension
    dimension

    expression of the dependence of a quantity on the base quantities of a system of quantities as a product of powers of factors corresponding to the base quantities, omitting any numerical factor
    NOTE 1 – A power of a factor is the factor raised to an exponent. Each factor is the dimension of a base quantity.
    NOTE 2 – The conventional symbolic representation of the dimension of a base quantity is a single upper case letter in roman (upright) sans-serif type. The conventional symbolic representation of the dimension of a derived quantity is the product of powers of the dimensions of the base quantities according to the definition of the derived quantity. The dimension of a quantity Q is denoted by dim Q.
    NOTE 3 – In deriving the dimension of a quantity, no account is taken of its scalar, vector or tensor character.
    NOTE 4 – In a given system of quantities, – quantities of the same kind have the same dimension, – quantities of different dimensions are always of different kinds, and – quantities having the same dimension are not necessarily of the same kind. For example, in the ISQ, pressure and energy density (volumic energy) have the same dimension L–1MT–2. See also note 5.
    NOTE 5 – In the International System of Quantities (ISQ), the symbols representing the dimensions of the base quantities are:
    0543
    [IEV number 112-01-11]

    FR

    dimension, f
    dimension d'une grandeur, f

    expression de la dépendance d’une grandeur par rapport aux grandeurs de base d'un système de grandeurs sous la forme d'un produit de puissances de facteurs correspondant aux grandeurs de base, en omettant tout facteur numérique
    NOTE 1 – Une puissance d'un facteur est le facteur muni d'un exposant. Chaque facteur exprime la dimension d'une grandeur de base.
    NOTE 2 – Par convention, la représentation symbolique de la dimension d'une grandeur de base est une lettre majuscule unique en caractère romain (droit) sans empattement. Par convention, la représentation symbolique de la dimension d'une grandeur dérivée est le produit de puissances des dimensions des grandeurs de base conformément à la définition de la grandeur dérivée. La dimension de la grandeur Q est notée dim Q.
    NOTE 3 – Pour établir la dimension d'une grandeur, on ne tient pas compte du caractère scalaire, vectoriel ou tensoriel.
    NOTE 4 – Dans un système de grandeurs donné, – les grandeurs de même nature ont la même dimension, – des grandeurs de dimensions différentes sont toujours de nature différente, – des grandeurs ayant la même dimension ne sont pas nécessairement de même nature. Par exemple, dans l'ISQ, la pression et l'énergie volumique ont la même dimension L–1MT–2. Voir aussi la note 5.
    NOTE 5 – Dans le Système international de grandeurs (ISQ), les symboles représentant les dimensions des grandeurs de base sont:
    0544
    [IEV number 112-01-11]

    Тематики

    • метрология, основные понятия

    Синонимы

    EN

    DE

    FR

    • dimension d'une grandeur, f
    • dimension, f

    Немецко-русский словарь нормативно-технической терминологии > Größendimension, f

  • 46 Konzentration wirtschaftlicher Macht

    1. рыночная концентрация

     

    рыночная концентрация

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    economic concentration
    The extent to which a market is taken up by producers within a given industry. (Source: ODE)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Konzentration wirtschaftlicher Macht

  • 47 Beschlagnahme

    1. секвест

     

    секвест

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    sequestration
    1) A legal term referring generally to the act of valuable property being taken into custody by an agent of the court and locked away for safekeeping, usually to prevent the property from being disposed of or abused before a dispute over its ownership can be resolved.
    2) The taking of someone's property, voluntarily (by deposit) or involuntarily (by seizure), by court officers or into the possession of a third party, awaiting the outcome of a trial in which ownership of that property is at issue.
    (Source: DUC / EMBMO)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Beschlagnahme

  • 48 Meßrelais zum Schutz vor thermischer Überlastung

    1. тепловое реле

     

    тепловое реле
    -

    [Интент]

    электротепловое реле
    Электрическое реле, работа которого основана на тепловом действии электрического тока
    [ ГОСТ 16022-83]

    EN

    thermal electrical relay
    dependent-time measuring relay which is intended to protect an equipment from electrical thermal damage by the measurement of the current flowing in the protected equipment and by a characteristic curve simulating its thermal behaviour
    [IEC 62271-1, ed. 1.0 (2007-10)]

    FR

    relais électrique thermique
    relais de mesure à temps dépendant destiné à protéger un équipement contre les dommages thermiques d'origine électrique par la mesure du courant circulant dans l'équipement protégé et par une courbe caractéristique simulant son comportement thermique
    [IEC 62271-1, ed. 1.0 (2007-10)]

    Параллельные тексты EN-RU

    Meanwhile, EMPR (Electronic Motor Protection Relay), also called as ‘Electronic Overcurrent Relay’ or ‘Electronic Overload Relay) may replace TOR to protect a low voltage motor.
    [LS Industrial Systems]

    При этом, для зашиты низковольтного электродвигателя, тепловое реле (TOR) можно заменить на электронное реле защиты электродвигателя (EMPR), которое также называют "электронное реле защиты от сверхтока" или электронное реле защиты от перегрузки.
    [Перевод Интент]

    It is better to use a fan with thermal switches.
    In this case the positioning of the fans should be taken care so as to not place the fan’s thermal switch close to heat dissipating devices so as to avoid any malfunctioning of thermal switch.
    [Schneider Electric]


    Лучше использовать вентиляторы с тепловым реле.
    В этом случае вентиляторы следует разместить таким образом, чтобы рядом с тепловым реле не было аппаратов с сильным выделением тепла. Это позволит избежать неправильного срабатывания теплового реле.

    [Перевод Интент]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Meßrelais zum Schutz vor thermischer Überlastung

  • 49 Thermisches Relais

    1. Электротепловое реле
    2. тепловое реле

     

    тепловое реле
    -

    [Интент]

    электротепловое реле
    Электрическое реле, работа которого основана на тепловом действии электрического тока
    [ ГОСТ 16022-83]

    EN

    thermal electrical relay
    dependent-time measuring relay which is intended to protect an equipment from electrical thermal damage by the measurement of the current flowing in the protected equipment and by a characteristic curve simulating its thermal behaviour
    [IEC 62271-1, ed. 1.0 (2007-10)]

    FR

    relais électrique thermique
    relais de mesure à temps dépendant destiné à protéger un équipement contre les dommages thermiques d'origine électrique par la mesure du courant circulant dans l'équipement protégé et par une courbe caractéristique simulant son comportement thermique
    [IEC 62271-1, ed. 1.0 (2007-10)]

    Параллельные тексты EN-RU

    Meanwhile, EMPR (Electronic Motor Protection Relay), also called as ‘Electronic Overcurrent Relay’ or ‘Electronic Overload Relay) may replace TOR to protect a low voltage motor.
    [LS Industrial Systems]

    При этом, для зашиты низковольтного электродвигателя, тепловое реле (TOR) можно заменить на электронное реле защиты электродвигателя (EMPR), которое также называют "электронное реле защиты от сверхтока" или электронное реле защиты от перегрузки.
    [Перевод Интент]

    It is better to use a fan with thermal switches.
    In this case the positioning of the fans should be taken care so as to not place the fan’s thermal switch close to heat dissipating devices so as to avoid any malfunctioning of thermal switch.
    [Schneider Electric]


    Лучше использовать вентиляторы с тепловым реле.
    В этом случае вентиляторы следует разместить таким образом, чтобы рядом с тепловым реле не было аппаратов с сильным выделением тепла. Это позволит избежать неправильного срабатывания теплового реле.

    [Перевод Интент]

    Тематики

    EN

    DE

    FR

    20. Электротепловое реле

    D. Thermisches Relais

    E. Thermal electrical relay

    F. Relais électrique thermique

    Электрическое реле, работа которого основана на тепловом действии электрического тока

    Источник: ГОСТ 16022-83: Реле электрические. Термины и определения оригинал документа

    Немецко-русский словарь нормативно-технической терминологии > Thermisches Relais

  • 50 Überlastrelais

    1. тепловое реле

     

    тепловое реле
    -

    [Интент]

    электротепловое реле
    Электрическое реле, работа которого основана на тепловом действии электрического тока
    [ ГОСТ 16022-83]

    EN

    thermal electrical relay
    dependent-time measuring relay which is intended to protect an equipment from electrical thermal damage by the measurement of the current flowing in the protected equipment and by a characteristic curve simulating its thermal behaviour
    [IEC 62271-1, ed. 1.0 (2007-10)]

    FR

    relais électrique thermique
    relais de mesure à temps dépendant destiné à protéger un équipement contre les dommages thermiques d'origine électrique par la mesure du courant circulant dans l'équipement protégé et par une courbe caractéristique simulant son comportement thermique
    [IEC 62271-1, ed. 1.0 (2007-10)]

    Параллельные тексты EN-RU

    Meanwhile, EMPR (Electronic Motor Protection Relay), also called as ‘Electronic Overcurrent Relay’ or ‘Electronic Overload Relay) may replace TOR to protect a low voltage motor.
    [LS Industrial Systems]

    При этом, для зашиты низковольтного электродвигателя, тепловое реле (TOR) можно заменить на электронное реле защиты электродвигателя (EMPR), которое также называют "электронное реле защиты от сверхтока" или электронное реле защиты от перегрузки.
    [Перевод Интент]

    It is better to use a fan with thermal switches.
    In this case the positioning of the fans should be taken care so as to not place the fan’s thermal switch close to heat dissipating devices so as to avoid any malfunctioning of thermal switch.
    [Schneider Electric]


    Лучше использовать вентиляторы с тепловым реле.
    В этом случае вентиляторы следует разместить таким образом, чтобы рядом с тепловым реле не было аппаратов с сильным выделением тепла. Это позволит избежать неправильного срабатывания теплового реле.

    [Перевод Интент]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Überlastrelais

  • 51 Erregerstrom, sekundärer

    1. ток намагничивания трансформатора тока

     

    ток намагничивания трансформатора тока
    Действующее значение тока, потребляемого вторичной обмоткой трансформатора тока, когда ко вторичным зажимам подведено синусоидальное напряжение номинальной частоты, причем первичная обмотка и все остальные обмотки разомкнуты.
    [ ГОСТ 18685-73]

    EN

    exciting current
    the r.m.s. value of the current taken by the secondary winding of a current transformer, when a sinusoidal voltage of rated frequency is applied to the secondary terminals, the primary and any other windings being open-circuited
    [IEV number 321-02-32]

    FR

    courant d'excitation
    valeur efficace du courant qui traverse l'enroulement secondaire d'un transformateur de courant, lorsqu'on applique entre les bornes secondaires une tension sinusoïdale à la fréquence assignée, l'enroulement primaire et tous les autres enroulements étant à circuit ouvert
    [IEV number 321-02-32]

    Недопустимые, нерекомендуемые

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Erregerstrom, sekundärer

  • 52 sekundärer Erregerstrom

    1. ток намагничивания трансформатора тока

     

    ток намагничивания трансформатора тока
    Действующее значение тока, потребляемого вторичной обмоткой трансформатора тока, когда ко вторичным зажимам подведено синусоидальное напряжение номинальной частоты, причем первичная обмотка и все остальные обмотки разомкнуты.
    [ ГОСТ 18685-73]

    EN

    exciting current
    the r.m.s. value of the current taken by the secondary winding of a current transformer, when a sinusoidal voltage of rated frequency is applied to the secondary terminals, the primary and any other windings being open-circuited
    [IEV number 321-02-32]

    FR

    courant d'excitation
    valeur efficace du courant qui traverse l'enroulement secondaire d'un transformateur de courant, lorsqu'on applique entre les bornes secondaires une tension sinusoïdale à la fréquence assignée, l'enroulement primaire et tous les autres enroulements étant à circuit ouvert
    [IEV number 321-02-32]

    Недопустимые, нерекомендуемые

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > sekundärer Erregerstrom

  • 53 Grundwassergefährdung

    1. угроза состоянию подземных вод

     

    угроза состоянию подземных вод

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    groundwater endangering
    Threat to the quality and quantity of groundwater by activities related to the use of land. As some activities (e.g. landfill) present a particular risk of pollution, the closer an activity is to a well or borehole, the greater the risk of the pumped water being polluted. The type of soil, the geology, the rainfall and the amount of water pumped out of the ground must all be taken into consideration. (Source: PORTa)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Grundwassergefährdung

  • 54 Phasenwinkelmessgerät

    1. фазометр

     

    фазометр
    -
    [IEV number 313-01-13]

    EN

    phase meter
    instrument intended to measure the phase difference between two alternating electrical quantities of the same frequency, one of which is taken as the phase reference
    [IEV number 313-01-13]

    FR

    phasemètre
    appareil destiné à mesurer le déphasage entre deux grandeurs électriques alternatives de même fréquence, la phase de l'une de ces grandeurs étant prise comme référence
    [IEV number 313-01-13]

    Тематики

    • измерение электр. величин в целом

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Phasenwinkelmessgerät

  • 55 geographische Form

    1. форма земной поверхности

     

    форма земной поверхности

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    landform
    Any physical, recognizable form or feature of the Earth's surface, having a characteristic shape and produced by natural causes; it includes major forms such as plane, plateau and mountain, and minor forms such as hill, valley, slope, esker, and dune. Taken together the landforms make up the surface configuration of the Earth's. (Source: BJGEO)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > geographische Form

  • 56 chemischer Dünger

    1. химическое удобрение

     

    химическое удобрение

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    chemical fertiliser
    Fertilizer manufactured from chemicals; excessive use of them can cause pollution, when all the chemicals are not taken up by the plants and the excess is leached out of the soil into rivers and may cause algal bloom. (Source: PHC)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > chemischer Dünger

  • 57 Raubvogel

    1. хищная птица

     

    хищная птица

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    bird of prey
    Any of various carnivorous bird of the orders Falconiformes and Strigiformes which feed on meat taken by hunting. (Source: MGH)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Raubvogel

  • 58 Überweidung

    1. чрезмерный выпас

     

    чрезмерный выпас

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    overgrazing
    Intensive grazing by animals, for example cattle, sheep or goats, on an area of pasture. It has become a serious threat to the world's rangelands and grasslands. Several factors have led to overgrazing, which leads to the soil being degraded and becoming liable to erosion by wind and rain, and even to desertification. The main pressures leading to widespread overgrazing have been the need to increase the size and numbers of herds to produce more food for an increasing human population, and the transformation of traditional pasture land into plantations to grow cash crops. Throughout the dry tropics, where traditionally herds ranged over vast areas, intensive livestock-rearing schemes have taken over, mostly to provide meat for the export market. Well-digging operations have also led to heavy concentrations of animals in small areas. (Source: WRIGHT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Немецко-русский словарь нормативно-технической терминологии > Überweidung

  • 59 Bezugspotentialschiene

    1. эквипотенциальная рама

     

    (эквипотенциальная) рама
    -
    [IEV number 151-13-07]

    EN

    (equipotential) frame
    conductive part of an equipment or installation the electric potential of which is taken as a reference
    NOTE – In many cases, a chassis made of conductive material may be used as an equipotential frame.
    [IEV number 151-13-07]

    FR

    masse (électrique), f
    châssis (équipotentiel), m
    partie conductrice d'un équipement ou d'une installation, dont le potentiel électrique est pris comme référence
    NOTE – Dans de nombreux cas, un châssis réalisé en matériau conducteur peut être utilisé comme masse électrique.
    [IEV number 151-13-07]

    Синонимы

    EN

    DE

    FR

    • châssis équipotentiel, m
    • châssis, m
    • masse électrique, f
    • masse, f

    Немецко-русский словарь нормативно-технической терминологии > Bezugspotentialschiene

См. также в других словарях:

  • Taken — hace referencia a los siguientes artículos: Taken, película del año 2008 protagonizada por Liam Neeson y Famke Janssen. Taken, serie de televisión producida por Steven Spielberg. Esta página de desambiguación cataloga artículos relacionados con… …   Wikipedia Español

  • taken\ by — • taken by • taken with v. phr. To be impressed by; intrigued by. Ned was much taken by the elegance of Sophie s manners …   Словарь американских идиом

  • taken — (take) tak·en || teɪkÉ™n v. get into one s possession; seize, capture, possess; grasp with the hands; contract, be affected with; carry away; captivate, charm; subtract, minus; do; occupy; ingest; ride; accept; feel; study; write down; endure;… …   English contemporary dictionary

  • taken — index lost (taken away), preferred (favored) Burton s Legal Thesaurus. William C. Burton. 2006 …   Law dictionary

  • Taken — Tak en (t[=a]k n), p. p. of {Take}. [1913 Webster] …   The Collaborative International Dictionary of English

  • taken — [tāk′ən] vt., vi. pp. of TAKE …   English World dictionary

  • Taken — Take Take, v. t. [imp. {Took} (t[oo^]k); p. p. {Taken} (t[=a]k n); p. pr. & vb. n. {Taking}.] [Icel. taka; akin to Sw. taga, Dan. tage, Goth. t[=e]kan to touch; of uncertain origin.] 1. In an active sense; To lay hold of; to seize with the hands …   The Collaborative International Dictionary of English

  • Taken — Seriendaten Deutscher Titel Taken Originaltitel Steven Spielberg Presents Taken …   Deutsch Wikipedia

  • Taken — Заложница Taken Жанр триллер, боевик Режиссёр Пьер Морел Продюсер Люк Бессон …   Википедия

  • Taken — Infobox Television Film name = Taken format = Drama, Science fiction camera = picture format = audio format = runtime = 877 minutes creator = Leslie Bohem developer = executive producer = starring = Dakota Fanning Elle Fanning Desmond Harrington… …   Wikipedia

  • taken — AND had; took 1. mod. cheated; deceived. □ I counted my change, and I knew I was taken. □ You were really took, all right. 2. mod. drug intoxicated; unconscious from drugs. □ The guy in the corner booth was taken and crying in his beer …   Dictionary of American slang and colloquial expressions

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»