-
1 pôle (d'un disjoncteur) protégé contre les surintensités
защищенный полюс
Полюс, оснащенный максимальным расцепителем тока
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
protected pole
pole provided with an overcurrent release
[IEV number 442-05-40]
[IEC 60934, ed. 3.0 (2000-10)]FR
pôle protégé
pôle muni d'un déclencheur à maximum de courant
[IEV number 442-05-40]
[IEC 60934, ed. 3.0 (2000-10)]Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
EN
DE
FR
защищенный полюс (от сверхтока)
-
[IEV number 442-05-40]EN
(overcurrent) protected pole (of a circuit-breaker)
a pole provided with an overcurrent release
[IEV number 442-05-40]FR
pôle (d'un disjoncteur) protégé contre les surintensités
pôle muni d'un déclencheur à maximum de courant
[IEV number 442-05-40]Тематики
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > pôle (d'un disjoncteur) protégé contre les surintensités
-
2 relais indirect à maximum de courant ou déclencheur indirect à maximum de courant
максимальное реле или максимальный расцепитель тока косвенного действия
Максимальное реле или максимальный расцепитель тока, питаемые током в главной цепи коммутационного аппарата через трансформатор тока или шунт.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
indirect overcurrent relay or indirect overcurrent release
overcurrent relay or release energised by the current in the main circuit of a switching device through a shunt or a sensor
[IEC 61992-1, ed. 2.0 (2006-02)]FR
relais indirect à maximum de courant ou déclencheur indirect à maximum de courant
relais ou déclencheur à maximum de courant alimenté par le courant du circuit principal d'un appareil de connexion par l'intermédiaire d'un shunt ou d'un capteur
[IEC 61992-1, ed. 2.0 (2006-02)]Тематики
- выключатель автоматический
- расцепитель, тепловое реле
- реле электрическое
Классификация
>>>EN
FR
- relais indirect à maximum de courant ou déclencheur indirect à maximum de courant
Франко-русский словарь нормативно-технической терминологии > relais indirect à maximum de courant ou déclencheur indirect à maximum de courant
-
3 relais direct à maximum de courant ou déclencheur direct à maximum de courant
максимальное реле или максимальный расцепитель тока прямого действия
Максимальное реле или максимальный расцепитель тока, срабатывающий непосредственно от тока главной цепи коммутационного аппарата.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
direct overcurrent relay or direct overcurrent release
overcurrent relay or release directly energised by the current in the main circuit of a switching device
[IEC 61992-1, ed. 2.0 (2006-02)]FR
relais direct à maximum de courant ou déclencheur direct à maximum de courant
relais ou déclencheur à maximum de courant alimenté directement par le courant dans le circuit principal d'un appareil de connexion
[IEC 61992-1, ed. 2.0 (2006-02)]Тематики
- расцепитель, тепловое реле
- реле электрическое
Классификация
>>>EN
FR
- relais direct à maximum de courant ou déclencheur direct à maximum de courant
Франко-русский словарь нормативно-технической терминологии > relais direct à maximum de courant ou déclencheur direct à maximum de courant
-
4 déclencheur à maximum de courant à temps inverse
максимальное реле или максимальный расцепитель тока с обратнозависимой выдержкой времени
Максимальное реле или максимальный расцепитель тока, срабатывающие с выдержкой времени, находящейся в обратной зависимости от значения сверхтока.
Примечание. Такие реле или расцепитель могут быть спроектированы так, чтобы при высоких значениях сверхтока выдержка времени достигала определенного минимального значения.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]
максимальный расцепитель тока с обратно-зависимой выдержкой времени
Максимальный расцепитель тока, срабатывающий после выдержки времени, находящейся в обратной зависимости от значения сверхтока.
Примечание — Такой расцепитель может быть спроектирован так, чтобы эта выдержка времени при высоких значениях сверхтока достигала определенного минимального значения
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
inverse time-delay over-current release
an over-current release which operates after a time-delay inversely dependent upon the value of the over-current
NOTE - Such a release may be designed so that the time-delay approaches a definite minimum value for high values of over-current.
[IEV number 441-16-35]
[IEC 62271-100, ed. 2.0 (2008-04)]
inverse time-delay overcurrent release
overcurrent release which operates after a time-delay inversely dependent upon the value of the overcurrent
NOTE - Such a release may be designed so that the time-delay approaches a definite minimum for high values of overcurrent.
[IEV number 441-16-35]
[IEC 60898-1, ed. 1.0 (2002-01)]FR
déclencheur à maximum de courant à temps inverse
déclencheur à maximum de courant qui fonctionne après un intervalle de temps qui varie en raison inverse de la valeur de la surintensité
NOTE - Un tel déclencheur peut être prévu pour que le retard atteigne une valeur minimale définie pour les valeurs élevées de la surintensité.
[IEV number 441-16-35]
[IEC 62271-100, ed. 2.0 (2008-04)]
[IEC 60898-1, ed. 1.0 (2002-01)]Недопустимые, нерекомендуемые
Тематики
- выключатель автоматический
- расцепитель, тепловое реле
Классификация
>>>EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > déclencheur à maximum de courant à temps inverse
-
5 relais à maximum de courant ou déclencheur à maximum de courant
максимальное реле или максимальный расцепитель тока
Реле или расцепитель, вызывающие размыкание контактного коммутационного аппарата с выдержкой времени или без нее, когда ток в реле или расцепителе превышает заданное значение.
Примечание. В некоторых случаях это значение может зависеть от скорости нарастания тока.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
overcurrent relay or overcurrent release
relay or release which causes a mechanical switching device to open with or without time-delay when the current in the relay or release exceeds a predetermined value.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
relais à maximum de courant ou déclencheur à maximum de courant
relais ou déclencheur qui entraîne l'ouverture d'un appareil mécanique de connexion avec ou sans retard lorsque le courant dans le relais ou le déclencheur dépasse une valeur prédéterminée
[IEC 61992-1, ed. 2.0 (2006-02)]Тематики
- выключатель автоматический
- расцепитель, тепловое реле
- реле электрическое
Классификация
>>>EN
FR
Франко-русский словарь нормативно-технической терминологии > relais à maximum de courant ou déclencheur à maximum de courant
-
6 déclencheur direct à maximum de courant
- максимальный расцепитель тока прямого действия (автоматического выключателя)
- максимальный расцепитель тока прямого действия
максимальный расцепитель тока прямого действия
Максимальный расцепитель тока, срабатывающий непосредственно от тока главной цепи коммутационного аппарата.
[Интент]EN
direct over-current release
an over-current release directly energized by the current in the main circuit of a mechanical switching device.
[IEV number 441-16-36]
[IEC 62271-100, ed. 2.0 (2008-04)]FR
déclencheur direct à maximum de courant
déclencheur à maximum de courant alimenté directement par le courant dans le circuit principal d’un appareil mécanique de connexion.
[IEV number 441-16-36]
[IEC 62271-100, ed. 2.0 (2008-04)]
Недопустимые, нерекомендуемые
Тематики
- выключатель автоматический
- расцепитель, тепловое реле
Классификация
>>>EN
DE
FR
максимальный расцепитель тока прямого действия
Максимальный расцепитель тока, срабатывающий непосредственно от протекающего тока в главной цепи автоматического выключателя
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
direct overcurrent release
overcurrent release directly energized by the current in the main circuit of a circuit-breaker
[IEC 60898-1, ed. 1.0 (2002-01)]FR
déclencheur direct à maximum de courant
déclencheur à maximum de courant alimenté directement par le courant dans le circuit principal d'un disjoncteur
[IEC 60898-1, ed. 1.0 (2002-01)]Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
- расцепитель, тепловое реле
EN
FR
Франко-русский словарь нормативно-технической терминологии > déclencheur direct à maximum de courant
-
7 dispositif de protection contre les surintensités
аппарат защиты от сверхтока
-EN
overcurrent protection device
device, such as a fuse or circuit-breaker, designed to interrupt the circuit when the current flow exceeds a predetermined value for a predetermined time
[IEC 60092-507, ed. 2.0 (2008-01)]FR
dispositif de protection contre les surintensités
dispositif, fusible ou disjoncteur, conçu pour interrompre le circuit lorsque le flux de courant dépasse une valeur prédéterminée pendant une durée prédéterminée
[IEC 60092-507, ed. 2.0 (2008-01)]Тематики
- аппарат, изделие, устройство...
Синонимы
EN
FR
Франко-русский словарь нормативно-технической терминологии > dispositif de protection contre les surintensités
-
8 déclencheur à maximum de courant
максимальный расцепитель тока
Расцепитель, вызывающий срабатывание аппарата при значении тока больше определенного значения.
[ ГОСТ 17703-72]
максимальное реле или максимальный расцепитель тока
Реле или расцепитель, вызывающие размыкание контактного коммутационного аппарата с выдержкой времени или без нее, когда ток в реле или расцепителе превышает заданное значение.
Примечание — В некоторых случаях это значение может зависеть от скорости нарастания тока.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
over-current release
a release which permits a mechanical switching device to open with or without time-delay when the current in the release exceeds a predetermined value
NOTE - This value can in some cases depend upon the rate-of-rise of current.
[IEC 62271-100, ed. 2.0 (2008-04)]FR
déclencheur à maximum de courant
déclencheur qui permet l’ouverture, avec ou sans retard, d’un appareil mécanique de connexion, lorsque le courant dans le déclencheur dépasse une valeur prédéterminée
NOTE - Cette valeur peut, dans certains cas, dépendre de la vitesse d’accroissement du courant.
[IEC 62271-100, ed. 2.0 (2008-04)]
Недопустимые, нерекомендуемые
Тематики
- выключатель автоматический
- расцепитель, тепловое реле
Классификация
>>>EN
FR
максимальный раcцепитель тока
Расцепитель, вызывающий срабатывание автоматического выключателя с выдержкой времени или без нее, когда ток в этом расцепителе превышает заданное значение.
Примечание — В некоторых случаях эта величина может зависеть от скорости нарастания тока
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
overcurrent release
release which causes a circuit-breaker to open, with or without time-delay, when the current in the release exceeds a pre-determined value
NOTE - In some cases this value can depend upon the rate of rise of current.
[IEC 60898-1, ed. 1.0 (2002-01)]FR
déclencheur à maximum de courant
déclencheur qui actionne avec ou sans retard un disjoncteur lorsque le courant dans le déclencheur dépasse une valeur prédéterminée
NOTE - Cette valeur peut, dans certains cas, dépendre de la vitesse d'accroissement du courant.
[IEC 60898-1, ed. 1.0 (2002-01)]Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
- расцепитель, тепловое реле
EN
FR
Франко-русский словарь нормативно-технической терминологии > déclencheur à maximum de courant
-
9 déclencheur instantané à maximum de courant
максимальный расцепитель тока мгновенного действия
максимальный расцепитель тока, срабатывающий без заданной выдержки времени
[Интент]EN
instantaneous overcurrent release
overcurrent release which operates without any intentional time-delay
[IEC 60934, ed. 3.0 (2000-10)]FR
déclencheur instantané à maximum de courant
déclencheur à maximum de courant qui fonctionne sans aucun retard intentionnel.
[IEC 60934, ed. 3.0 (2000-10)]
Недопустимые, нерекомендуемые
Тематики
- выключатель автоматический
- расцепитель, тепловое реле
Классификация
>>>EN
FR
Франко-русский словарь нормативно-технической терминологии > déclencheur instantané à maximum de courant
-
10 pôle non protégé
незащищенный полюс автоматического выключателя
Полюс, не оснащенный максимальным расцепителем тока.
[ ГОСТ Р 50031-99]
незащищенный полюс
Полюс, не оснащенный максимальным расцепителем тока, но в остальном способный функционировать так же, как защищенный полюс того же автоматического выключателя:
а) во исполнение этого требования незащищенный полюс может иметь такую же конструкцию, как один или более защищенных полюсов, или особую конструкцию;
б) если отключающая способность незащищенного полюса иная, чем у одного или более защищенных полюсов, это должно быть оговорено изготовителем
[ ГОСТ Р 50345-99( МЭК 60898-95)]
незащищенный полюс (от сверхтока)
-
[IEV number 442-05-41]EN
unprotected pole
pole without overcurrent release (see 3.3.6), but otherwise generally capable of the same performance as a protected pole of the same circuit-breaker
NOTE 1 - To ensure compliance with this requirement, the unprotected pole may be of the same construction as the protected pole(s), or of a particular construction.
NOTE 2 - If the short-circuit capacity of the unprotected pole is different from that of the protected pole(s), this has to be indicated by the manufacturer.
[IEC 60898-1, ed. 1.0 (2002-01)]
(overcurrent) unprotected pole (of a circuit-breaker)
a pole without overcurrent release, but otherwise generally capable of the same performance as a protected pole of the same circuit-breaker
[IEV number 442-05-41]FR
pôle non protégé
pôle sans déclencheur à maximum de courant (voir 3.3.6), mais, hormis cela, généralement capable des mêmes performances qu'un pôle protégé du même disjoncteur
NOTE 1 - Pour assurer cette prescription, le pôle non protégé peut être de la même construction que le ou les pôles protégés ou d'une construction particulière.
NOTE 2 - Si le pouvoir de coupure du pôle non protégé est différent de celui du ou des pôles protégés ceci sera indiqué par le constructeur
[IEC 60898-1, ed. 1.0 (2002-01)]
pôle (d'un disjoncteur) non protégé contre les surintensités
pôle sans déclencheur à maximum de courant, mais à part cela généralement capable des mêmes performances qu'un pôle protégé contre les surintensités du même disjoncteur
[IEV number 442-05-41]Тематики
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > pôle non protégé
-
11 sélectivité partielle
частичная селективность
Селективность по сверхтокам, когда при последовательном соединении двух аппаратов защиты от сверхтоков аппарат со стороны нагрузки осуществляет защиту до определенного уровня сверхтока без срабатывания второго защитного аппарата.
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]EN
partial discrimination (partial selectivity)
overcurrent discrimination where, in the presence of two overcurrent protective devices in series, the protective device on the load side effects the protection up to a given level of overcurrent, without causing the other protective device to operate
[IEC 60947-2, definition 2.17.3]FR
sélectivité partielle
sélectivité lors d'une surintensité dans laquelle, en présence de deux dispositifs de protection à maximum de courant placés en série, le dispositif de protection aval assure la protection jusqu'à un niveau donné de surintensité sans provoquer le fonctionnement de l'autre dispositif de protection
[IEC 60947-2, definition 2.17.3]Тематики
EN
FR
Франко-русский словарь нормативно-технической терминологии > sélectivité partielle
-
12 ID
- автоматический выключатель, управляемый дифференциальным током без встроенной защиты от сверхтока
автоматический выключатель, управляемый дифференциальным током без встроенной защиты от сверхтока
-
[IEV number 442-05-03]
Управляемый дифференциальным током автоматический выключатель, не предназначенный для защиты от сверхтока.EN
residual current operated circuit-breaker without integral overcurrent protection
RCCB (abbreviation)
a residual current operated switching device not designed to perform the functions of protection against overloads and/or short-circuits
[IEV number 442-05-03]
[IEC 61008-1, ed. 2.0 (1996-12)]FR
interrupteur différentiel sans protection incorporée contre les surintensités
ID (abréviation)
dispositif de coupure différentiel non conçu pour réaliser les fonctions de protection contre les surcharges et/ou les courts-circuits
[IEV number 442-05-03]
[IEC 61008-1, ed. 2.0 (1996-12)]Тематики
Обобщающие термины
Синонимы
EN
- pure residual current circuit-breaker
- RCCB
- residual current operated circuit-breaker without integral overcurrent protection
DE
FR
- ID
- interrupteur différentiel sans protection incorporée contre les surintensités
Франко-русский словарь нормативно-технической терминологии > ID
-
13 interrupteur différentiel sans protection incorporée contre les surintensités
- автоматический выключатель, управляемый дифференциальным током без встроенной защиты от сверхтока
автоматический выключатель, управляемый дифференциальным током без встроенной защиты от сверхтока
-
[IEV number 442-05-03]
Управляемый дифференциальным током автоматический выключатель, не предназначенный для защиты от сверхтока.EN
residual current operated circuit-breaker without integral overcurrent protection
RCCB (abbreviation)
a residual current operated switching device not designed to perform the functions of protection against overloads and/or short-circuits
[IEV number 442-05-03]
[IEC 61008-1, ed. 2.0 (1996-12)]FR
interrupteur différentiel sans protection incorporée contre les surintensités
ID (abréviation)
dispositif de coupure différentiel non conçu pour réaliser les fonctions de protection contre les surcharges et/ou les courts-circuits
[IEV number 442-05-03]
[IEC 61008-1, ed. 2.0 (1996-12)]Тематики
Обобщающие термины
Синонимы
EN
- pure residual current circuit-breaker
- RCCB
- residual current operated circuit-breaker without integral overcurrent protection
DE
FR
- ID
- interrupteur différentiel sans protection incorporée contre les surintensités
Франко-русский словарь нормативно-технической терминологии > interrupteur différentiel sans protection incorporée contre les surintensités
-
14 DD (abréviation)
- автоматический выключатель, управляемый дифференциальным током со встроенной защитой от сверхтока
автоматический выключатель, управляемый дифференциальным током со встроенной защитой от сверхтока
-
[IEV number 442-05-04*]
Управляемый дифференциальным током автоматический выключатель, предназначенный для выполнения функции защиты от сверхтока.EN
residual current operated circuit-breaker with integral overcurrent protection
RCBO (abbreviation)
a residual current operated switching device designed to perform the functions of protection against overloads and/or short-circuits
[IEV number 442-05-04]FR
disjoncteur différentiel résiduel avec protection incorporée contre les surintensités
DD (abréviation)
dispositif de coupure différentiel conçu pour réaliser les fonctions de protection contre les surcharges et/ou les courts-circuits
[IEV number 442-05-04]Тематики
Синонимы
EN
- RCBO (abbreviation)
- residual current operated circuit-breaker with integral overcurrent protection
DE
FR
- DD (abréviation)
- disjoncteur différentiel résiduel avec protection incorporée contre les surintensités
Франко-русский словарь нормативно-технической терминологии > DD (abréviation)
-
15 disjoncteur différentiel résiduel avec protection incorporée contre les surintensités
- автоматический выключатель, управляемый дифференциальным током со встроенной защитой от сверхтока
автоматический выключатель, управляемый дифференциальным током со встроенной защитой от сверхтока
-
[IEV number 442-05-04*]
Управляемый дифференциальным током автоматический выключатель, предназначенный для выполнения функции защиты от сверхтока.EN
residual current operated circuit-breaker with integral overcurrent protection
RCBO (abbreviation)
a residual current operated switching device designed to perform the functions of protection against overloads and/or short-circuits
[IEV number 442-05-04]FR
disjoncteur différentiel résiduel avec protection incorporée contre les surintensités
DD (abréviation)
dispositif de coupure différentiel conçu pour réaliser les fonctions de protection contre les surcharges et/ou les courts-circuits
[IEV number 442-05-04]Тематики
Синонимы
EN
- RCBO (abbreviation)
- residual current operated circuit-breaker with integral overcurrent protection
DE
FR
- DD (abréviation)
- disjoncteur différentiel résiduel avec protection incorporée contre les surintensités
Франко-русский словарь нормативно-технической терминологии > disjoncteur différentiel résiduel avec protection incorporée contre les surintensités
-
16 appareillage
аппаратура распределения и управления
Общий термин для коммутационных аппаратов и их комбинации с относящимися к ним устройствами управления, измерения, защиты и регулирования, а также для узлов, в которых такие аппараты и устройства соединяются с соответствующими фидерами, комплектующим оборудованием, оболочками и опорными конструкциями.
МЭК 60050 (441-11-01) [1].
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
switchgear and controlgear
general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEC 62271-1, ed. 1.0 (2007-10)]FR
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu’aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEC 62271-1, ed. 1.0 (2007-10)]Тематики
- аппарат, изделие, устройство...
EN
DE
- Schaltanlagen und/oder Schaltgeräte
FR
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
СП
D. Werkstückaufnahmevorrichtung
E. Machine retaining device
F. Appareillage
Приспособление, применяемое на металлорежущем и (или) деревообрабатывающем станке
Источник: ГОСТ 31.010.01-84: Приспособления станочные. Термины и определения оригинал документа
Франко-русский словарь нормативно-технической терминологии > appareillage
-
17 courant admissible, m
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Франко-русский словарь нормативно-технической терминологии > courant admissible, m
-
18 courant permanent admissible, m
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Франко-русский словарь нормативно-технической терминологии > courant permanent admissible, m
-
19 pôle protégé
защищенный полюс
Полюс, оснащенный максимальным расцепителем тока
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
protected pole
pole provided with an overcurrent release
[IEV number 442-05-40]
[IEC 60934, ed. 3.0 (2000-10)]FR
pôle protégé
pôle muni d'un déclencheur à maximum de courant
[IEV number 442-05-40]
[IEC 60934, ed. 3.0 (2000-10)]Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > pôle protégé
-
20 protection à maximum de courant
максимальная токовая защита
МТЗ
-
[В.А.Семенов. Англо-русский словарь по релейной защите]
максимальная токовая защита
Защита, предназначенная срабатывать, когда ток превышает заранее установленное значение.
[Разработка типовых структурных схем микропроцессорных устройств РЗА на объектах ОАО "ФКС ЕЭС". Пояснительная записка. Новосибирск 2006 г.]EN
overcurrent protection
protection intended to operate when the current is in excess of a predetermined value
[IEV ref 448-14-26]FR
protection à maximum de courant
protection destinée à fonctionner lorsque le courant dépasse une valeur prédéterminée
[IEV ref 448-14-26]Тематики
Синонимы
EN
DE
- Maximalstromschutz, m, (CH)
- Überstromschutz, m
FR
Франко-русский словарь нормативно-технической терминологии > protection à maximum de courant
См. также в других словарях:
Overcurrent — In electricity supply, overcurrent or excess current is a situation where a larger than intended electric current exists through a conductor, leading to excessive generation of heat, and the risk of fire or damage to equipment. Possible causes… … Wikipedia
overcurrent — viršsrovis statusas T sritis fizika atitikmenys: angl. overcurrent vok. Überstrom, m rus. сверхток, m pranc. surintensité, f … Fizikos terminų žodynas
overcurrent circuit breaker — automatinis maksimaliosios srovės jungiklis statusas T sritis automatika atitikmenys: angl. overcurrent circuit breaker vok. Überstromschalter, m; Überstromschutzschalter, m rus. автоматический выключатель максимального тока, m pranc. disjoncteur … Automatikos terminų žodynas
overcurrent fault detector — viršsrovio detektorius statusas T sritis automatika atitikmenys: angl. overcurrent fault detector vok. Überstromdetektor, m rus. детектор сверхтока, m pranc. détecteur de surintensité de courant, m … Automatikos terminų žodynas
overcurrent protection — maksimaliosios srovės apsauga statusas T sritis automatika atitikmenys: angl. overcurrent protection vok. Überstromschutz, m rus. защита от сверхтока, f; максимальная токовая защита, f pranc. protection à maximum de courant, f; protection… … Automatikos terminų žodynas
overcurrent relay — maksimaliosios srovės relė statusas T sritis automatika atitikmenys: angl. overcurrent relay vok. Überstromrelais, n rus. реле максимального тока, n pranc. relais à maximum de courant, m ryšiai: sinonimas – didžiausiosios srovės relė … Automatikos terminų žodynas
overcurrent protection — apsauga nuo viršsrovio statusas T sritis radioelektronika atitikmenys: angl. overcurrent protection vok. Überstromschutz, m rus. защита от сверхтока, f pranc. protection à maximum de courant, f … Radioelektronikos terminų žodynas
overcurrent circuit breaker — didžiausiosios ribinės srovės išjungiklis statusas T sritis radioelektronika atitikmenys: angl. maximum current breaker; overcurrent circuit breaker vok. Überstromschalter, m; Überstromschutzschalter, m rus. автомат максимального тока, m pranc.… … Radioelektronikos terminų žodynas
overcurrent relay — didžiausiosios leidžiamosios srovės relė statusas T sritis fizika atitikmenys: angl. overcurrent relay vok. Überstromrelais, n rus. реле максимального тока, n pranc. relais à maximum de courant, m … Fizikos terminų žodynas
overcurrent — /oh veuhr kerr euhnt, kur /, n. Elect. a current of a magnitude that is greater than a limiting value, as the value at which a fuse melts. [1930 35; OVER + CURRENT] * * * … Universalium
overcurrent — ˈ ̷ ̷ ̷ ̷ˌ ̷ ̷ ̷ ̷ noun : an electrical current whose intensity is higher than a specified amount … Useful english dictionary