north+yorkshire

Geography: Hornby

Geography: Hornby

ZOOLOGIE Yorkshire terrier

* * *

Yorkshire ⇒ Les régions nprm le Yorkshire Yorkshire; le North/South/West Yorkshire North/South/West Yorkshire.

[jɔrkʃɶr] nom masculin,

yorkshire-terrier [jɔrkʃɶrterje] ( pluriel yorkshires ou yorkshire-terriers) nom masculin

Yorkshire terrier

Geography: North Yorkshire (Англия, Великобритания)

SUBJECT AREA: Electricity, Land transport, Railways and locomotives

[br]

[br]

[br]

Aspinall's father was a QC, Recorder of Liverpool, and Aspinall himself became a pupil at Crewe Works of the London \& North Western Railway, eventually under F.W. Webb. In 1875 he was appointed Manager of the works at Inchicore, Great Southern \& Western Railway, Ireland. While he was there, some of the trains were equipped, on trial, with continuous brakes of the non-automatic vacuum type. Aspinall modified these to make them automatic, i.e. if the train divided, brakes throughout both parts would be applied automatically. Aspinall vacuum brakes were subsequently adopted by the important Great Northern, Lancashire \& Yorkshire, and London \& North Western Railways.

In 1883, aged only 32, Aspinall was appointed Locomotive Superintendent of the Great Southern \& Western Railway, but in 1886 he moved in the same capacity to the Lancashire \& Yorkshire Railway, where his first task was to fit out the new works at Horwich. The first locomotive was completed there in 1889, to his design. In 1899 he introduced a 4–4–2, the largest express locomotive in Britain at the time, some of which were fitted with smokebox superheaters to Aspinall's design.

Unusually for an engineer, in 1892 Aspinall was appointed General Manager of the Lancashire \& Yorkshire Railway. He electrified the Liverpool-Southport line in 1904 at 600 volts DC with a third rail; this was an early example of main-line electrification, for it extended beyond the Liverpool suburban area. He also experimented with 3,500 volt DC overhead electrification of the Bury-Holcombe Brook branch in 1913, but converted this to 1,200 volts DC third rail to conform with the Manchester-Bury line when this was electrified in 1915. In 1918 he was made a director of the Lancashire \& Yorkshire Railway.

[br]

See also: Gresley, Sir Herbert Nigel; Schmidt, Wilhelm; Westinghouse, George

SUBJECT AREA: Land transport, Railways and locomotives

[br]

[br]

[br]

Gresley was the son of the Rector of Netherseale, Derbyshire; he was educated at Marlborough and by the age of 13 was skilled at making sketches of locomotives. In 1893 he became a pupil of F.W. Webb at Crewe works, London \& North Western Railway, and in 1898 he moved to Horwich works, Lancashire \& Yorkshire Railway, to gain drawing-office experience under J.A.F.Aspinall, subsequently becoming Foreman of the locomotive running sheds at Blackpool. In 1900 he transferred to the carriage and wagon department, and in 1904 he had risen to become its Assistant Superintendent. In 1905 he moved to the Great Northern Railway, becoming Superintendent of its carriage and wagon department at Doncaster under H.A. Ivatt. In 1906 he designed and produced a bogie luggage van with steel underframe, teak body, elliptical roof, bowed ends and buckeye couplings: this became the prototype for East Coast main-line coaches built over the next thirty-five years. In 1911 Gresley succeeded Ivatt as Locomotive, Carriage \& Wagon Superintendent. His first locomotive was a mixed-traffic 2–6–0, his next a 2–8–0 for freight. From 1915 he worked on the design of a 4–6–2 locomotive for express passenger traffic: as with Ivatt's 4 4 2s, the trailing axle would allow the wide firebox needed for Yorkshire coal. He also devised a means by which two sets of valve gear could operate the valves on a three-cylinder locomotive and applied it for the first time on a 2–8–0 built in 1918. The system was complex, but a later simplified form was used on all subsequent Gresley three-cylinder locomotives, including his first 4–6–2 which appeared in 1922. In 1921, Gresley introduced the first British restaurant car with electric cooking facilities.

With the grouping of 1923, the Great Northern Railway was absorbed into the London \& North Eastern Railway and Gresley was appointed Chief Mechanical Engineer. More 4–6– 2s were built, the first British class of such wheel arrangement. Modifications to their valve gear, along lines developed by G.J. Churchward, reduced their coal consumption sufficiently to enable them to run non-stop between London and Edinburgh. So that enginemen might change over en route, some of the locomotives were equipped with corridor tenders from 1928. The design was steadily improved in detail, and by comparison an experimental 4–6–4 with a watertube boiler that Gresley produced in 1929 showed no overall benefit. A successful high-powered 2–8–2 was built in 1934, following the introduction of third-class sleeping cars, to haul 500-ton passenger trains between Edinburgh and Aberdeen.

In 1932 the need to meet increasing road competition had resulted in the end of a long-standing agreement between East Coast and West Coast railways, that train journeys between London and Edinburgh by either route should be scheduled to take 8 1/4 hours. Seeking to accelerate train services, Gresley studied high-speed, diesel-electric railcars in Germany and petrol-electric railcars in France. He considered them for the London \& North Eastern Railway, but a test run by a train hauled by one of his 4–6–2s in 1934, which reached 108 mph (174 km/h), suggested that a steam train could better the railcar proposals while its accommodation would be more comfortable. To celebrate the Silver Jubilee of King George V, a high-speed, streamlined train between London and Newcastle upon Tyne was proposed, the first such train in Britain. An improved 4–6–2, the A4 class, was designed with modifications to ensure free running and an ample reserve of power up hill. Its streamlined outline included a wedge-shaped front which reduced wind resistance and helped to lift the exhaust dear of the cab windows at speed. The first locomotive of the class, named Silver Link, ran at an average speed of 100 mph (161 km/h) for 43 miles (69 km), with a maximum speed of 112 1/2 mph (181 km/h), on a seven-coach test train on 27 September 1935: the locomotive went into service hauling the Silver Jubilee express single-handed (since others of the class had still to be completed) for the first three weeks, a round trip of 536 miles (863 km) daily, much of it at 90 mph (145 km/h), without any mechanical troubles at all. Coaches for the Silver Jubilee had teak-framed, steel-panelled bodies on all-steel, welded underframes; windows were double glazed; and there was a pressure ventilation/heating system. Comparable trains were introduced between London Kings Cross and Edinburgh in 1937 and to Leeds in 1938.

Gresley did not hesitate to incorporate outstanding features from elsewhere into his locomotive designs and was well aware of the work of André Chapelon in France. Four A4s built in 1938 were equipped with Kylchap twin blast-pipes and double chimneys to improve performance still further. The first of these to be completed, no. 4468, Mallard, on 3 July 1938 ran a test train at over 120 mph (193 km/h) for 2 miles (3.2 km) and momentarily achieved 126 mph (203 km/h), the world speed record for steam traction. J.Duddington was the driver and T.Bray the fireman. The use of high-speed trains came to an end with the Second World War. The A4s were then demonstrated to be powerful as well as fast: one was noted hauling a 730-ton, 22-coach train at an average speed exceeding 75 mph (120 km/h) over 30 miles (48 km). The war also halted electrification of the Manchester-Sheffield line, on the 1,500 volt DC overhead system; however, anticipating eventual resumption, Gresley had a prototype main-line Bo-Bo electric locomotive built in 1941. Sadly, Gresley died from a heart attack while still in office.

[br]

See also: Bulleid, Oliver Vaughan Snell

SUBJECT AREA: Mining and extraction technology

[br]

[br]

[br]

After Menzies conceived his idea of breaking off coal with machines in 1761, many inventors subsequently followed his proposals through into the practice of underground working. More than one century later, Garforth became one of the principal pioneers of machine-holing combined with the longwall method of working in order to reduce production costs and increase the yield of coal. Having been appointed agent to Pope \& Pearson's Collieries, West Yorkshire, in 1879, of which company he later became Managing Director and Chairman, he gathered a great deal of experience with different methods of cutting coal. The first disc machine was exhibited in London as early as 1851, and ten years later a pick machine was invented. In 1893 he introduced an improved type of deep undercutting machine, his "diamond" disc coal-cutter, driven by compressed air, which also became popular on the European continent.

Besides the considerable economic advantages it created, the use of machinery for mining coal increased the safety of working in hard and thin seams. The improvement of safety in mining technology was always his primary concern, and as a result of his inventions and his many publications he became the leading figure in the British coal mining industry at the beginning of the twentieth century; safety lamps still carry his name. In 1885 he invented a firedamp detector, and following a severe explosion in 1886 he concentrated on coal-dust experiments. From the information he obtained of the effect of stone-dust on a coal-dust explosion he proposed the stone-dust remedy to prevent explosions of coal-dust. As a result of discussions which lasted for decades and after he had been entrusted with the job of conducting the British coal-dust experiments, in 1921 an Act made it compulsory in all mines which were not naturally wet throughout to treat all roads with incombustible dust so as to ensure that the dust always consisted of a mixture containing not more than 50 per cent combustible matter. In 1901 Garforth erected a surface gallery which represented the damaged roadways of a mine and could be filled with noxious fumes to test self-contained breathing apparata. This gallery formed the model from which all the rescue-stations existing nowadays have been developed.

[br]

SUBJECT AREA: Textiles

[br]

[br]

[br]

Lister was descended from one of the old Yorkshire families, the Cunliffe Listers of Manningham, and was the fourth son of his father Ellis. After attending a school on Clapham Common, Lister would not go to university; his family hoped he would enter the Church, but instead he started work with the Liverpool merchants Sands, Turner \& Co., who frequently sent him to America. In 1837 his father built for him and his brother a worsted mill at Manningham, where Samuel invented a swivel shuttle and a machine for making fringes on shawls. It was here that he first became aware of the unhealthy occupation of combing wool by hand. Four years later, after seeing the machine that G.E. Donisthorpe was trying to work out, he turned his attention to mechanizing wool-combing. Lister took Donisthorpe into partnership after paying him £12,000 for his patent, and developed the Lister-Cartwright "square nip" comber. Until this time, combing machines were little different from Cartwright's original, but Lister was able to improve on this with continuous operation and by 1843 was combing the first fine botany wool that had ever been combed by machinery. In the following year he received an order for fifty machines to comb all qualities of wool. Further combing patents were taken out with Donisthorpe in 1849, 1850, 1851 and 1852, the last two being in Lister's name only. One of the important features of these patents was the provision of a gripping device or "nip" which held the wool fibres at one end while the rest of the tuft was being combed. Lister was soon running nine combing mills. In the 1850s Lister had become involved in disputes with others who held combing patents, such as his associate Isaac Holden and the Frenchman Josué Heilmann. Lister bought up the Heilmann machine patents and afterwards other types until he obtained a complete monopoly of combing machines before the patents expired. His invention stimulated demand for wool by cheapening the product and gave a vital boost to the Australian wool trade. By 1856 he was at the head of a wool-combing business such as had never been seen before, with mills at Manningham, Bradford, Halifax, Keighley and other places in the West Riding, as well as abroad.

His inventive genius also extended to other fields. In 1848 he patented automatic compressed air brakes for railways, and in 1853 alone he took out twelve patents for various textile machines. He then tried to spin waste silk and made a second commercial career, turning what was called "chassum" and hitherto regarded as refuse into beautiful velvets, silks, plush and other fine materials. Waste silk consisted of cocoon remnants from the reeling process, damaged cocoons and fibres rejected from other processes. There was also wild silk obtained from uncultivated worms. This is what Lister saw in a London warehouse as a mass of knotty, dirty, impure stuff, full of bits of stick and dead mulberry leaves, which he bought for a halfpenny a pound. He spent ten years trying to solve the problems, but after a loss of £250,000 and desertion by his partner his machine caught on in 1865 and brought Lister another fortune. Having failed to comb this waste silk, Lister turned his attention to the idea of "dressing" it and separating the qualities automatically. He patented a machine in 1877 that gave a graduated combing. To weave his new silk, he imported from Spain to Bradford, together with its inventor Jose Reixach, a velvet loom that was still giving trouble. It wove two fabrics face to face, but the problem lay in separating the layers so that the pile remained regular in length. Eventually Lister was inspired by watching a scissors grinder in the street to use small emery wheels to sharpen the cutters that divided the layers of fabric. Lister took out several patents for this loom in his own name in 1868 and 1869, while in 1871 he took out one jointly with Reixach. It is said that he spent £29,000 over an eleven-year period on this loom, but this was more than recouped from the sale of reasonably priced high-quality velvets and plushes once success was achieved. Manningham mills were greatly enlarged to accommodate this new manufacture.

In later years Lister had an annual profit from his mills of £250,000, much of which was presented to Bradford city in gifts such as Lister Park, the original home of the Listers. He was connected with the Bradford Chamber of Commerce for many years and held the position of President of the Fair Trade League for some time. In 1887 he became High Sheriff of Yorkshire, and in 1891 he was made 1st Baron Masham. He was also Deputy Lieutenant in North and West Riding.

[br]

SUBJECT AREA: Land transport, Mining and extraction technology, Railways and locomotives

[br]

[br]

[br]

After being educated at Sheffield Grammar School, Thompson and his elder brother established Aberdare Iron Works, South Wales, where he gained experience in mine engineering from the coal-and ironstone-mines with which the works were connected. In 1811 he moved to the North of England as Managing Partner in Bewicke's Main Colliery, County Durham, which was replaced in 1814 by a new colliery at nearby Ouston. Coal from this was carried to the Tyne over the Pelew Main Wagonway, which included a 1,992 yd (1,821 m) section where horses had to haul loaded wagons between the top of one cable-worked incline and the foot of the next. Both inclines were worked by stationary steam engines, and by installing a rope with a record length of nearly 1 1/2 miles (2.4 km), in 1821 Thompson arranged for the engine of the upper incline to haul the loaded wagons along the intervening section also. To their rear was attached the rope from the engine of the lower incline, to be used in due course to haul the empties back again.

He subsequently installed this system of "reciprocal working" elsewhere, in particular in 1826 over five miles (8 km) of the Brunton \& Shields Railroad, a colliery line north of the Tyne, where trains were hauled at an average speed of 6 mph (10 km/h) including rope changes. This performance was better than that of contemporary locomotives. The directors of the Liverpool \& Manchester Railway, which was then being built, considered installing reciprocal cable haulage on their line, and then decided to stage a competition to establish whether an improved steam locomotive could do better still. This competition became the Rainhill Trials of 1829 and was decisively won by Rocket, which had been built for the purpose.

Thompson meanwhile had become prominent in the promotion of the Newcastle \& Carlisle Railway, which, when it received its Act in 1829, was the longest railway so far authorized in Britain.

[br]

See also: Rastrick, John Urpeth; Stephenson, Robert

SUBJECT AREA: Mechanical, pneumatic and hydraulic engineering, Metallurgy, Steam and internal combustion engines

[br]

[br]

[br]

Adamson was apprenticed between 1835 and 1841 to Timothy Hackworth, then Locomotive Superintendent on the Stockton \& Darlington Railway. After this he was appointed Draughtsman, then Superintendent Engineer, at that railway's locomotive works until in 1847 he became Manager of Shildon Works. In 1850 he resigned and moved to act as General Manager of Heaton Foundry, Stockport. In the following year he commenced business on his own at Newton Moor Iron Works near Manchester, where he built up his business as an iron-founder and boilermaker. By 1872 this works had become too small and he moved to a 4 acre (1.6 hectare) site at Hyde Junction, Dukinfield. There he employed 600 men making steel boilers, heavy machinery including mill engines fitted with the American Wheelock valve gear, hydraulic plant and general millwrighting. His success was based on his early recognition of the importance of using high-pressure steam and steel instead of wrought iron. In 1852 he patented his type of flanged seam for the firetubes of Lancashire boilers, which prevented these tubes cracking through expansion. In 1862 he patented the fabrication of boilers by drilling rivet holes instead of punching them and also by drilling the holes through two plates held together in their assembly positions. He had started to use steel for some boilers he made for railway locomotives in 1857, and in 1860, only four years after Bessemer's patent, he built six mill engine boilers from steel for Platt Bros, Oldham. He solved the problems of using this new material, and by his death had made c.2,800 steel boilers with pressures up to 250 psi (17.6 kg/cm²).

He was a pioneer in the general introduction of steel and in 1863–4 was a partner in establishing the Yorkshire Iron and Steel Works at Penistone. This was the first works to depend entirely upon Bessemer steel for engineering purposes and was later sold at a large profit to Charles Cammell \& Co., Sheffield. When he started this works, he also patented improvements both to the Bessemer converters and to the engines which provided their blast. In 1870 he helped to turn Lincolnshire into an important ironmaking area by erecting the North Lincolnshire Ironworks. He was also a shareholder in ironworks in South Wales and Cumberland.

He contributed to the development of the stationary steam engine, for as early as 1855 he built one to run with a pressure of 150 psi (10.5 kg/cm) that worked quite satisfactorily. He reheated the steam between the cylinders of compound engines and then in 1861–2 patented a triple-expansion engine, followed in 1873 by a quadruple-expansion one to further economize steam. In 1858 he developed improved machinery for testing tensile strength and compressive resistance of materials, and in the same year patents for hydraulic lifting jacks and riveting machines were obtained.

He was a founding member of the Iron and Steel Institute and became its President in 1888 when it visited Manchester. The previous year he had been President of the Institution of Civil Engineers when he was presented with the Bessemer Gold Medal. He was a constant contributor at the meetings of these associations as well as those of the Institution of Mechanical Engineers. He did not live to see the opening of one of his final achievements, the Manchester Ship Canal. He was the one man who, by his indomitable energy and skill at public speaking, roused the enthusiasm of the people in Manchester for this project and he made it a really practical proposition in the face of strong opposition.

[br]

SUBJECT AREA: Civil engineering, Public utilities

[br]

[br]

[br]

Bateman's maternal grandfather was a Moravian missionary, and from the age of 7 he was educated at the Moravian schools at Fairfield and Ockbrook. At the age of 15 he was apprenticed to a "civil engineer, land surveyor and agent" in Oldham. After this apprenticeship, Bateman commenced his own practice in 1833. One of his early schemes and reports was in regard to the flooding of the river Medlock in the Manchester area. He came to the attention of William Fairbairn, the engine builder and millwright of Canal Street, Ancoats, Manchester. Fairbairn used Bateman as his site surveyor and as such he prepared much of the groundwork for the Bann reservoirs in Northern Ireland. Whilst the reports on the proposals were in the name of Fairbairn, Bateman was, in fact, appointed by the company as their engineer for the execution of the works. One scheme of Bateman's which was carried forward was the Kendal Reservoirs. The Act for these was signed in 1845 and was implemented not for the purpose of water supply but for the conservation of water to supply power to the many mills which stood on the river Kent between Kentmere and Morecambe Bay. The Kentmere Head dam is the only one of the five proposed for the scheme to survive, although not all the others were built as they would have retained only small volumes of water.

Perhaps the greatest monument to the work of J.F.La Trobe Bateman is Manchester's water supply; he was consulted about this in 1844, and construction began four years later. He first built reservoirs in the Longdendale valley, which has a very complicated geological stratification. Bateman favoured earth embankment dams and gravity feed rather than pumping; the five reservoirs in the valley that impound the river Etherow were complex, cored earth dams. However, when completed they were greatly at risk from landslips and ground movement. Later dams were inserted by Bateman to prevent water loss should the older dams fail. The scheme was not completed until 1877, by which time Manchester's population had exceeded the capacity of the original scheme; Thirlmere in Cumbria was chosen by Manchester Corporation as the site of the first of the Lake District water-supply schemes. Bateman, as Consulting Engineer, designed the great stone-faced dam at the west end of the lake, the "gothic" straining well in the middle of the east shore of the lake, and the 100-mile (160 km) pipeline to Manchester. The Act for the Thirlmere reservoir was signed in 1879 and, whilst Bateman continued as Consulting Engineer, the work was supervised by G.H. Hill and was completed in 1894.

Bateman was also consulted by the authorities in Glasgow, with the result that he constructed an impressive water-supply scheme derived from Loch Katrine during the years 1856–60. It was claimed that the scheme bore comparison with "the most extensive aqueducts in the world, not excluding those of ancient Rome". Bateman went on to superintend the waterworks of many cities, mainly in the north of England but also in Dublin and Belfast. In 1865 he published a pamphlet, On the Supply of Water to London from the Sources of the River Severn, based on a survey funded from his own pocket; a Royal Commission examined various schemes but favoured Bateman's.

Bateman was also responsible for harbour and dock works, notably on the rivers Clyde and Shannon, and also for a number of important water-supply works on the Continent of Europe and beyond. Dams and the associated reservoirs were the principal work of J.F.La Trobe Bateman; he completed forty-three such schemes during his professional career. He also prepared many studies of water-supply schemes, and appeared as professional witness before the appropriate Parliamentary Committees.

[br]

KM / LRD

SUBJECT AREA: Chemical technology, Metallurgy

[br]

[br]

[br]

Following an extensive education, in 1835 Bell entered the Tyneside chemical and iron business where his father was a partner; for about five years from 1845 he controlled the ironworks. In 1844, he and his two brothers leased an iron blast-furnace at Wylam on Tyne. In 1850, with partners, he started chemical works at Washington, near Gateshead. A few years later, with his two brothers, he set up the Clarence Ironworks on Teesside. In the 1880s, salt extraction and soda-making were added there; at that time the Bell Brothers' enterprises, including collieries, employed 6,000 people.

Lowthian Bell was a pioneer in applying thermochemistry to blast-furnace working. Besides his commercial interests, scientific experimentation and international travel, he found time to take a leading part in the promotion of British technical organizations; upon his death he left evidence of a prodigious level of personal activity.

[br]

SUBJECT AREA: Electronics and information technology

[br]

[br]

[br]

After education at Warley Grammar School, Briggs entered St John's College, Cambridge, in 1577 and became a fellow in 1588. Having been Reader of the Linacre Lecture in 1592, he was appointed to the new Chair in Geometry at Gresham House (subsequently Gresham College), London, in 1596. Shortly after, he concluded that the logarithms developed by John Napier would be much more useful if they were calculated to the decimal base 10, rather than to the base e (the "natural" number 2.71828…), a suggestion with which Napier concurred. Until the advent of modern computing these decimal logarithms were invaluable for the accurate calculations involved in surveying, navigation and astronomy. In 1619 he accepted the Savilian Chair in Geometry at Oxford University, having two years previously published the base 10 logarithms of 1,000 numbers. The year 1624 saw the completion of his monumental Arithmetica Logarithmica, which contained fourteen-figure logarithms of 30,000 numbers, together with their trigonometric sines to fifteen decimal places and their tangents and secants to ten places!

[br]

SUBJECT AREA: Metallurgy

[br]

[br]

[br]

After working as a millwright in Halifax, Riley found employment at the Ormesby Ironworks in Middlesbrough until, in 1869, he became manager of the Askam Ironworks in Cumberland. Three years later, in 1872, he was appointed Blast-furnace Manager at the pioneering Siemens Steel Company's works at Landore, near Swansea in South Wales. Using Spanish ore, he produced the manganese-rich iron (spiegeleisen) required as an additive to make satisfactory steel. Riley was promoted in 1874 to be General Manager at Landore, and he worked with William Siemens to develop the use of the latter's regenerative furnace for the production of open-hearth steel. He persuaded Welsh makers of tin plate to use sheets rolled from lowcarbon (mild) steel instead of from charcoal iron and, partly by publishing some test results, he was instrumental in influencing the Admiralty to build two naval vessels of mild steel, the Mercury and the Iris.

In 1878 Riley moved north on his appointment as General Manager of the Steel Company of Scotland, a firm closely associated with Charles Tennant that was formed in 1872 to make steel by the Siemens process. Already by 1878, fourteen Siemens melting furnaces had been erected, and in that year 42,000 long tons of ingots were produced at the company's Hallside (Newton) Works, situated 8 km (5 miles) south-east of Glasgow. Under Riley's leadership, steelmaking in open-hearth furnaces was initiated at a second plant situated at Blochairn. Plates and sections for all aspects of shipbuilding, including boilers, formed the main products; the company also supplied the greater part of the steel for the Forth (Railway) Bridge. Riley was associated with technical modifications which improved the performance of steelmaking furnaces using Siemens's principles. He built a gasfired cupola for melting pig-iron, and constructed the first British "universal" plate mill using three-high rolls (Lauth mill).

At the request of French interests, Riley investigated the properties of steels containing various proportions of nickel; the report that he read before the Iron and Steel Institute in 1889 successfully brought to the notice of potential users the greatly enhanced strength that nickel could impart and its ability to yield alloys possessing substantially lower corrodibility.

The Steel Company of Scotland paid dividends in the years to 1890, but then came a lean period. In 1895, at the age of 54, Riley moved once more to another employer, becoming General Manager of the Glasgow Iron and Steel Company, which had just laid out a new steelmaking plant at Wishaw, 25 km (15 miles) south-east of Glasgow, where it already had blast furnaces. Still the technical innovator, in 1900 Riley presented an account of his experiences in introducing molten blast-furnace metal as feed for the open-hearth steel furnaces. In the early 1890s it was largely through Riley's efforts that a West of Scotland Board of Conciliation and Arbitration for the Manufactured Steel Trade came into being; he was its first Chairman and then its President.

In 1899 James Riley resigned from his Scottish employment to move back to his native Yorkshire, where he became his own master by acquiring the small Richmond Ironworks situated at Stockton-on-Tees. Although Riley's 1900 account to the Iron and Steel Institute was the last of the many of which he was author, he continued to contribute to the discussion of papers written by others.

[br]

SUBJECT AREA: Metallurgy

[br]

[br]

[br]

Saniter spent three years as a pupil in J.E.Stead's chemical laboratory in Middlesbrough, and then from 1883 was employed in the same town as Assistant Chemist at the new North-Eastern Steelworks. In 1890 he became Chief Chemist to the Wigan Coal and Iron Company in Lancashire. There he devised a desulphurizing treatment for molten iron and steel, based upon the presence of abundant lime together with calcium chloride. Between 1898 and 1904 he was in the Middlesbrough district once more, employed by Dorman Long \& Co. and Bell Brothers in experiments which led to the establishment of Teesside's first large-scale basic open-hearth steel plant. Calcium fluoride (fluorspar), mentioned in Saniter's 1892 patent, soon came to replace the calcium chloride; with this modification, his method retained wide applicability throughout the era of open-hearth steel. In 1904 Saniter became chief metallurgist to Steel, Peech \& Tozer Limited of Sheffield, and he remained in this post until 1928. Throughout the last forty years of his life he participated in the discussion of steelmaking developments and practices.

[br]