locomotive+engineers

['æzlef]

* * *

ASLEF abk Br Associated Society of Locomotive Engineers and Firemen

Member of the Institute of Locomotive Engineers

[ æzlef] 〈 afkorting, Brits-Engels〉

1 [Associated Society of Locomotive Engineers and Firemen]

(= Associated Society of Locomotive Engineers and Firemen) sindacato dei conducenti dei treni e dei fuochisti

n abbr ( BRIT)

= Associated Society of Locomotive Engineers and Firemen związek zawodowy kolejarzy

сокр. от Associated Society of Locomotive Engineers and Firemen

ASLEF n GB ( abrév = Associated Society of Locomotive Engineers and Firemen) syndicat m de cheminots.

ASLEF ['æzlef]

noun

Railways ( abbreviation Associated Society of Locomotive Engineers and Firemen) = syndicat des cheminots en Grande-Bretagne

SUBJECT AREA: Land transport, Railways and locomotives

[br]

[br]

[br]

George Stephenson was the son of the fireman of the pumping engine at Wylam colliery, and horses drew wagons of coal along the wooden rails of the Wylam wagonway past the house in which he was born and spent his earliest childhood. While still a child he worked as a cowherd, but soon moved to working at coal pits. At 17 years of age he showed sufficient mechanical talent to be placed in charge of a new pumping engine, and had already achieved a job more responsible than that of his father. Despite his position he was still illiterate, although he subsequently learned to read and write. He was largely self-educated.

In 1801 he was appointed Brakesman of the winding engine at Black Callerton pit, with responsibility for lowering the miners safely to their work. Then, about two years later, he became Brakesman of a new winding engine erected by Robert Hawthorn at Willington Quay on the Tyne. Returning collier brigs discharged ballast into wagons and the engine drew the wagons up an inclined plane to the top of "Ballast Hill" for their contents to be tipped; this was one of the earliest applications of steam power to transport, other than experimentally.

In 1804 Stephenson moved to West Moor pit, Killingworth, again as Brakesman. In 1811 he demonstrated his mechanical skill by successfully modifying a new and unsatisfactory atmospheric engine, a task that had defeated the efforts of others, to enable it to pump a drowned pit clear of water. The following year he was appointed Enginewright at Killingworth, in charge of the machinery in all the collieries of the "Grand Allies", the prominent coal-owning families of Wortley, Liddell and Bowes, with authorization also to work for others. He built many stationary engines and he closely examined locomotives of John Blenkinsop's type on the Kenton \& Coxlodge wagonway, as well as those of William Hedley at Wylam.

It was in 1813 that Sir Thomas Liddell requested George Stephenson to build a steam locomotive for the Killingworth wagonway: Blucher made its first trial run on 25 July 1814 and was based on Blenkinsop's locomotives, although it lacked their rack-and-pinion drive. George Stephenson is credited with building the first locomotive both to run on edge rails and be driven by adhesion, an arrangement that has been the conventional one ever since. Yet Blucher was far from perfect and over the next few years, while other engineers ignored the steam locomotive, Stephenson built a succession of them, each an improvement on the last.

During this period many lives were lost in coalmines from explosions of gas ignited by miners' lamps. By observation and experiment (sometimes at great personal risk) Stephenson invented a satisfactory safety lamp, working independently of the noted scientist Sir Humphry Davy who also invented such a lamp around the same time.

In 1817 George Stephenson designed his first locomotive for an outside customer, the Kilmarnock \& Troon Railway, and in 1819 he laid out the Hetton Colliery Railway in County Durham, for which his brother Robert was Resident Engineer. This was the first railway to be worked entirely without animal traction: it used inclined planes with stationary engines, self-acting inclined planes powered by gravity, and locomotives.

On 19 April 1821 Stephenson was introduced to Edward Pease, one of the main promoters of the Stockton \& Darlington Railway (S \& DR), which by coincidence received its Act of Parliament the same day. George Stephenson carried out a further survey, to improve the proposed line, and in this he was assisted by his 18-year-old son, Robert Stephenson, whom he had ensured received the theoretical education which he himself lacked. It is doubtful whether either could have succeeded without the other; together they were to make the steam railway practicable.

At George Stephenson's instance, much of the S \& DR was laid with wrought-iron rails recently developed by John Birkinshaw at Bedlington Ironworks, Morpeth. These were longer than cast-iron rails and were not brittle: they made a track well suited for locomotives. In June 1823 George and Robert Stephenson, with other partners, founded a firm in Newcastle upon Tyne to build locomotives and rolling stock and to do general engineering work: after its Managing Partner, the firm was called Robert Stephenson \& Co.

In 1824 the promoters of the Liverpool \& Manchester Railway (L \& MR) invited George Stephenson to resurvey their proposed line in order to reduce opposition to it. William James, a wealthy land agent who had become a visionary protagonist of a national railway network and had seen Stephenson's locomotives at Killingworth, had promoted the L \& MR with some merchants of Liverpool and had carried out the first survey; however, he overreached himself in business and, shortly after the invitation to Stephenson, became bankrupt. In his own survey, however, George Stephenson lacked the assistance of his son Robert, who had left for South America, and he delegated much of the detailed work to incompetent assistants. During a devastating Parliamentary examination in the spring of 1825, much of his survey was shown to be seriously inaccurate and the L \& MR's application for an Act of Parliament was refused. The railway's promoters discharged Stephenson and had their line surveyed yet again, by C.B. Vignoles.

The Stockton \& Darlington Railway was, however, triumphantly opened in the presence of vast crowds in September 1825, with Stephenson himself driving the locomotive Locomotion, which had been built at Robert Stephenson \& Co.'s Newcastle works. Once the railway was at work, horse-drawn and gravity-powered traffic shared the line with locomotives: in 1828 Stephenson invented the horse dandy, a wagon at the back of a train in which a horse could travel over the gravity-operated stretches, instead of trotting behind.

Meanwhile, in May 1826, the Liverpool \& Manchester Railway had successfully obtained its Act of Parliament. Stephenson was appointed Engineer in June, and since he and Vignoles proved incompatible the latter left early in 1827. The railway was built by Stephenson and his staff, using direct labour. A considerable controversy arose c. 1828 over the motive power to be used: the traffic anticipated was too great for horses, but the performance of the reciprocal system of cable haulage developed by Benjamin Thompson appeared in many respects superior to that of contemporary locomotives. The company instituted a prize competition for a better locomotive and the Rainhill Trials were held in October 1829.

Robert Stephenson had been working on improved locomotive designs since his return from America in 1827, but it was the L \& MR's Treasurer, Henry Booth, who suggested the multi-tubular boiler to George Stephenson. This was incorporated into a locomotive built by Robert Stephenson for the trials: Rocket was entered by the three men in partnership. The other principal entrants were Novelty, entered by John Braithwaite and John Ericsson, and Sans Pareil, entered by Timothy Hackworth, but only Rocket, driven by George Stephenson, met all the organizers' demands; indeed, it far surpassed them and demonstrated the practicability of the long-distance steam railway. With the opening of the Liverpool \& Manchester Railway in 1830, the age of railways began.

Stephenson was active in many aspects. He advised on the construction of the Belgian State Railway, of which the Brussels-Malines section, opened in 1835, was the first all-steam railway on the European continent. In England, proposals to link the L \& MR with the Midlands had culminated in an Act of Parliament for the Grand Junction Railway in 1833: this was to run from Warrington, which was already linked to the L \& MR, to Birmingham. George Stephenson had been in charge of the surveys, and for the railway's construction he and J.U. Rastrick were initially Principal Engineers, with Stephenson's former pupil Joseph Locke under them; by 1835 both Stephenson and Rastrick had withdrawn and Locke was Engineer-in-Chief. Stephenson remained much in demand elsewhere: he was particularly associated with the construction of the North Midland Railway (Derby to Leeds) and related lines. He was active in many other places and carried out, for instance, preliminary surveys for the Chester \& Holyhead and Newcastle \& Berwick Railways, which were important links in the lines of communication between London and, respectively, Dublin and Edinburgh.

He eventually retired to Tapton House, Chesterfield, overlooking the North Midland. A man who was self-made (with great success) against colossal odds, he was ever reluctant, regrettably, to give others their due credit, although in retirement, immensely wealthy and full of honour, he was still able to mingle with people of all ranks.

[br]

SUBJECT AREA: Land transport, Railways and locomotives

[br]

[br]

[br]

At the age of 13, Kirtley was a pupil of George Stephenson on the Stockton \& Darlington Railway. He subsequently became a fireman and then a driver of locomotives: he drove the first locomotive to enter London on the London \& Birmingham Railway. When the Midland Railway was formed in 1844 he was appointed Locomotive Superintendent. Ever since the Act of Parliament for the Liverpool \& Manchester Railway had required that its locomotives consume their own smoke (probably as a reaction to the clouds of black smoke emitted by steamboats at Liverpool), the usual fuel for locomotives had been coke. Early multi-tubular boilers, with their small fireboxes and short tubes, were in any case unsuitable for coal because they did not allow the burning gases sufficient time to combust properly. Many engineers attempted to solve the problem with weird and complex boiler designs. Kirtley and Charles Markham, who was working under him, succeeded by inserting a deflector plate above the firedoor and an arch of firebricks in the front of the firebox: this helped to maintain the high temperatures needed and lengthened the route by which the gases travelled. The brick arch and deflector plate became the usual components of locomotive fireboxes, and expensive coke was replaced as fuel by coal.

[br]

SUBJECT AREA: Land transport, Railways and locomotives

[br]

[br]

[br]

Robert Stephenson's father was George Stephenson, who ensured that his son was educated to obtain the theoretical knowledge he lacked himself. In 1821 Robert Stephenson assisted his father in his survey of the Stockton \& Darlington Railway and in 1822 he assisted William James in the first survey of the Liverpool \& Manchester Railway. He then went to Edinburgh University for six months, and the following year Robert Stephenson \& Co. was named after him as Managing Partner when it was formed by himself, his father and others. The firm was to build stationary engines, locomotives and railway rolling stock; in its early years it also built paper-making machinery and did general engineering.

In 1824, however, Robert Stephenson accepted, perhaps in reaction to an excess of parental control, an invitation by a group of London speculators called the Colombian Mining Association to lead an expedition to South America to use steam power to reopen gold and silver mines. He subsequently visited North America before returning to England in 1827 to rejoin his father as an equal and again take charge of Robert Stephenson \& Co. There he set about altering the design of steam locomotives to improve both their riding and their steam-generating capacity. Lancashire Witch, completed in July 1828, was the first locomotive mounted on steel springs and had twin furnace tubes through the boiler to produce a large heating surface. Later that year Robert Stephenson \& Co. supplied the Stockton \& Darlington Railway with a wagon, mounted for the first time on springs and with outside bearings. It was to be the prototype of the standard British railway wagon. Between April and September 1829 Robert Stephenson built, not without difficulty, a multi-tubular boiler, as suggested by Henry Booth to George Stephenson, and incorporated it into the locomotive Rocket which the three men entered in the Liverpool \& Manchester Railway's Rainhill Trials in October. Rocket, was outstandingly successful and demonstrated that the long-distance steam railway was practicable.

Robert Stephenson continued to develop the locomotive. Northumbrian, built in 1830, had for the first time, a smokebox at the front of the boiler and also the firebox built integrally with the rear of the boiler. Then in Planet, built later the same year, he adopted a layout for the working parts used earlier by steam road-coach pioneer Goldsworthy Gurney, placing the cylinders, for the first time, in a nearly horizontal position beneath the smokebox, with the connecting rods driving a cranked axle. He had evolved the definitive form for the steam locomotive.

Also in 1830, Robert Stephenson surveyed the London \& Birmingham Railway, which was authorized by Act of Parliament in 1833. Stephenson became Engineer for construction of the 112-mile (180 km) railway, probably at that date the greatest task ever undertaken in of civil engineering. In this he was greatly assisted by G.P.Bidder, who as a child prodigy had been known as "The Calculating Boy", and the two men were to be associated in many subsequent projects. On the London \& Birmingham Railway there were long and deep cuttings to be excavated and difficult tunnels to be bored, notoriously at Kilsby. The line was opened in 1838.

In 1837 Stephenson provided facilities for W.F. Cooke to make an experimental electrictelegraph installation at London Euston. The directors of the London \& Birmingham Railway company, however, did not accept his recommendation that they should adopt the electric telegraph and it was left to I.K. Brunel to instigate the first permanent installation, alongside the Great Western Railway. After Cooke formed the Electric Telegraph Company, Stephenson became a shareholder and was Chairman during 1857–8.

Earlier, in the 1830s, Robert Stephenson assisted his father in advising on railways in Belgium and came to be increasingly in demand as a consultant. In 1840, however, he was almost ruined financially as a result of the collapse of the Stanhope \& Tyne Rail Road; in return for acting as Engineer-in-Chief he had unwisely accepted shares, with unlimited liability, instead of a fee.

During the late 1840s Stephenson's greatest achievements were the design and construction of four great bridges, as part of railways for which he was responsible. The High Level Bridge over the Tyne at Newcastle and the Royal Border Bridge over the Tweed at Berwick were the links needed to complete the East Coast Route from London to Scotland. For the Chester \& Holyhead Railway to cross the Menai Strait, a bridge with spans as long-as 460 ft (140 m) was needed: Stephenson designed them as wrought-iron tubes of rectangular cross-section, through which the trains would pass, and eventually joined the spans together into a tube 1,511 ft (460 m) long from shore to shore. Extensive testing was done beforehand by shipbuilder William Fairbairn to prove the method, and as a preliminary it was first used for a 400 ft (122 m) span bridge at Conway.

In 1847 Robert Stephenson was elected MP for Whitby, a position he held until his death, and he was one of the exhibition commissioners for the Great Exhibition of 1851. In the early 1850s he was Engineer-in-Chief for the Norwegian Trunk Railway, the first railway in Norway, and he also built the Alexandria \& Cairo Railway, the first railway in Africa. This included two tubular bridges with the railway running on top of the tubes. The railway was extended to Suez in 1858 and for several years provided a link in the route from Britain to India, until superseded by the Suez Canal, which Stephenson had opposed in Parliament. The greatest of all his tubular bridges was the Victoria Bridge across the River St Lawrence at Montreal: after inspecting the site in 1852 he was appointed Engineer-in-Chief for the bridge, which was 1 1/2 miles (2 km) long and was designed in his London offices. Sadly he, like Brunel, died young from self-imposed overwork, before the bridge was completed in 1859.

[br]

See also: Pihl, Carl Abraham; Seguin, Marc

SUBJECT AREA: Mechanical, pneumatic and hydraulic engineering, Metallurgy, Steam and internal combustion engines

[br]

[br]

[br]

Adamson was apprenticed between 1835 and 1841 to Timothy Hackworth, then Locomotive Superintendent on the Stockton \& Darlington Railway. After this he was appointed Draughtsman, then Superintendent Engineer, at that railway's locomotive works until in 1847 he became Manager of Shildon Works. In 1850 he resigned and moved to act as General Manager of Heaton Foundry, Stockport. In the following year he commenced business on his own at Newton Moor Iron Works near Manchester, where he built up his business as an iron-founder and boilermaker. By 1872 this works had become too small and he moved to a 4 acre (1.6 hectare) site at Hyde Junction, Dukinfield. There he employed 600 men making steel boilers, heavy machinery including mill engines fitted with the American Wheelock valve gear, hydraulic plant and general millwrighting. His success was based on his early recognition of the importance of using high-pressure steam and steel instead of wrought iron. In 1852 he patented his type of flanged seam for the firetubes of Lancashire boilers, which prevented these tubes cracking through expansion. In 1862 he patented the fabrication of boilers by drilling rivet holes instead of punching them and also by drilling the holes through two plates held together in their assembly positions. He had started to use steel for some boilers he made for railway locomotives in 1857, and in 1860, only four years after Bessemer's patent, he built six mill engine boilers from steel for Platt Bros, Oldham. He solved the problems of using this new material, and by his death had made c.2,800 steel boilers with pressures up to 250 psi (17.6 kg/cm²).

He was a pioneer in the general introduction of steel and in 1863–4 was a partner in establishing the Yorkshire Iron and Steel Works at Penistone. This was the first works to depend entirely upon Bessemer steel for engineering purposes and was later sold at a large profit to Charles Cammell \& Co., Sheffield. When he started this works, he also patented improvements both to the Bessemer converters and to the engines which provided their blast. In 1870 he helped to turn Lincolnshire into an important ironmaking area by erecting the North Lincolnshire Ironworks. He was also a shareholder in ironworks in South Wales and Cumberland.

He contributed to the development of the stationary steam engine, for as early as 1855 he built one to run with a pressure of 150 psi (10.5 kg/cm) that worked quite satisfactorily. He reheated the steam between the cylinders of compound engines and then in 1861–2 patented a triple-expansion engine, followed in 1873 by a quadruple-expansion one to further economize steam. In 1858 he developed improved machinery for testing tensile strength and compressive resistance of materials, and in the same year patents for hydraulic lifting jacks and riveting machines were obtained.

He was a founding member of the Iron and Steel Institute and became its President in 1888 when it visited Manchester. The previous year he had been President of the Institution of Civil Engineers when he was presented with the Bessemer Gold Medal. He was a constant contributor at the meetings of these associations as well as those of the Institution of Mechanical Engineers. He did not live to see the opening of one of his final achievements, the Manchester Ship Canal. He was the one man who, by his indomitable energy and skill at public speaking, roused the enthusiasm of the people in Manchester for this project and he made it a really practical proposition in the face of strong opposition.

[br]

SUBJECT AREA: Electricity, Land transport, Railways and locomotives

[br]

[br]

[br]

Aspinall's father was a QC, Recorder of Liverpool, and Aspinall himself became a pupil at Crewe Works of the London \& North Western Railway, eventually under F.W. Webb. In 1875 he was appointed Manager of the works at Inchicore, Great Southern \& Western Railway, Ireland. While he was there, some of the trains were equipped, on trial, with continuous brakes of the non-automatic vacuum type. Aspinall modified these to make them automatic, i.e. if the train divided, brakes throughout both parts would be applied automatically. Aspinall vacuum brakes were subsequently adopted by the important Great Northern, Lancashire \& Yorkshire, and London \& North Western Railways.

In 1883, aged only 32, Aspinall was appointed Locomotive Superintendent of the Great Southern \& Western Railway, but in 1886 he moved in the same capacity to the Lancashire \& Yorkshire Railway, where his first task was to fit out the new works at Horwich. The first locomotive was completed there in 1889, to his design. In 1899 he introduced a 4–4–2, the largest express locomotive in Britain at the time, some of which were fitted with smokebox superheaters to Aspinall's design.

Unusually for an engineer, in 1892 Aspinall was appointed General Manager of the Lancashire \& Yorkshire Railway. He electrified the Liverpool-Southport line in 1904 at 600 volts DC with a third rail; this was an early example of main-line electrification, for it extended beyond the Liverpool suburban area. He also experimented with 3,500 volt DC overhead electrification of the Bury-Holcombe Brook branch in 1913, but converted this to 1,200 volts DC third rail to conform with the Manchester-Bury line when this was electrified in 1915. In 1918 he was made a director of the Lancashire \& Yorkshire Railway.

[br]

See also: Gresley, Sir Herbert Nigel; Schmidt, Wilhelm; Westinghouse, George

SUBJECT AREA: Land transport, Railways and locomotives

[br]

[br]

[br]

Beyer came from a family of poor weavers, but showed talent as an artist and draftsman and was educated at Dresden Polytechnic School. He was sent to England in 1834 to report on improvements in cotton spinning machinery and settled in Manchester, working for the machinery manufacturers Sharp Roberts \& Co., initially as a draftsman. When the firm started to build locomotives he moved to this side of the business. The Institution of Mechanical Engineers was founded at his house in 1847. In 1853 Beyer entered into a partnership with Richard Peacock, Locomotive Engineer to the Manchester, Sheffield \& Lincolnshire Railway, and Henry Robertson to establish Beyer, Peacock \& Co. The company soon established a reputation for soundly designed, elegant locomotives: it exported worldwide, and survived until the 1960s.

[br]

See also: Garratt, Herbert William

SUBJECT AREA: Land transport, Railways and locomotives

[br]

[br]

[br]

Fairlie worked on railways in Ireland and India, and established himself as a consulting engineer in London by the early 1860s. In 1864 he patented his design of locomotive: it was to be carried on two bogies and had a double boiler, the barrels extending in each direction from a central firebox. From smokeboxes at the outer ends, return tubes led to a single central chimney. At that time in British practice, locomotives of ever-increasing size were being carried on longer and longer rigid wheelbases, but often only one or two of their three or four pairs of wheels were powered. Bogies were little used and then only for carrying-wheels rather than driving-wheels: since their pivots were given no sideplay, they were of little value. Fairlie's design offered a powerful locomotive with a wheelbase which though long would be flexible; it would ride well and have all wheels driven and available for adhesion.

The first five double Fairlie locomotives were built by James Cross \& Co. of St Helens during 1865–7. None was particularly successful: the single central chimney of the original design had been replaced by two chimneys, one at each end of the locomotive, but the single central firebox was retained, so that exhaust up one chimney tended to draw cold air down the other. In 1870 the next double Fairlie, Little Wonder, was built for the Festiniog Railway, on which C.E. Spooner was pioneering steam trains of very narrow gauge. The order had gone to George England, but the locomotive was completed by his successor in business, the Fairlie Engine \& Steam Carriage Company, in which Fairlie and George England's son were the principal partners. Little Wonder was given two inner fireboxes separated by a water space and proved outstandingly successful. The spectacle of this locomotive hauling immensely long trains up grade, through the Festiniog Railway's sinuous curves, was demonstrated before engineers from many parts of the world and had lasting effect. Fairlie himself became a great protagonist of narrow-gauge railways and influenced their construction in many countries.

Towards the end of the 1860s, Fairlie was designing steam carriages or, as they would now be called, railcars, but only one was built before the death of George England Jr precipitated closure of the works in 1870. Fairlie's business became a design agency and his patent locomotives were built in large numbers under licence by many noted locomotive builders, for narrow, standard and broad gauges. Few operated in Britain, but many did in other lands; they were particularly successful in Mexico and Russia.

Many Fairlie locomotives were fitted with the radial valve gear invented by Egide Walschaert; Fairlie's role in the universal adoption of this valve gear was instrumental, for he introduced it to Britain in 1877 and fitted it to locomotives for New Zealand, whence it eventually spread worldwide. Earlier, in 1869, the Great Southern \& Western Railway of Ireland had built in its works the first "single Fairlie", a 0–4–4 tank engine carried on two bogies but with only one of them powered. This type, too, became popular during the last part of the nineteenth century. In the USA it was built in quantity by William Mason of Mason Machine Works, Taunton, Massachusetts, in preference to the double-ended type.

Double Fairlies may still be seen in operation on the Festiniog Railway; some of Fairlie's ideas were far ahead of their time, and modern diesel and electric locomotives are of the powered-bogie, double-ended type.

[br]

SUBJECT AREA: Land transport, Railways and locomotives

[br]

[br]

[br]

Hackworth trained under his father, who was Foreman Blacksmith at Wylam colliery, and succeeded him upon his death in 1807. Between 1812 and 1816 he helped to build and maintain the Wylam locomotives under William Hedley. He then moved to Walbottle colliery, but during 1824 he took temporary charge of Robert Stephenson \& Co.'s works while George Stephenson was surveying the Liverpool \& Manchester Railway and Robert Stephenson was away in South America. In May 1825 Hackworth was appointed to the Stockton \& Darlington Railway (S \& DR) "to have superintendence of the permanent (i.e. stationary) and locomotive engines". He established the workshops at Shildon, and when the railway opened in September he became in effect the first locomotive superintendent of a railway company. From experience of operating Robert Stephenson \& Co.'s locomotives he was able to make many detail improvements, notably spring safety valves. In 1827 he designed and built the locomotive Royal George, with six wheels coupled and inverted vertical cylinders driving the rear pair. From the pistons, drive was direct by way of piston rods and connecting rods to crankpins on the wheels, the first instance of the use of this layout on a locomotive. Royal George was the most powerful and satisfactory locomotive on the S \& DR to date and was the forerunner of Hackworth's type of heavy-goods locomotive, which was built until the mid-1840s.

For the Rainhill Trials in 1829 Hackworth built and entered the locomotive Sans Pareil, which was subsequently used on the Bol ton \& Leigh Railway and is now in the Science Museum, London. A working replica was built for the 150th anniversary of the Liverpool \& Manchester Railway in 1980. In 1833 a further agreement with the S \& DR enabled Hackworth, while remaining in charge of their locomotives, to set up a locomotive and engineering works on his own account. Its products eventually included locomotives for the London, Brighton \& South Coast and York, Newcastle \& Berwick Railways, as well as some of the earliest locomotives exported to Russia and Canada. Hackworth's son, John Wesley Hackworth, was also an engineer and invented the radial valve gear for steam engines that bears his name.

[br]

SUBJECT AREA: Electricity, Land transport, Railways and locomotives

[br]

[br]

[br]

Davidson, son of an Aberdeen merchant, attended Marischal College, Aberdeen, between 1819 and 1822: his studies included mathematics, mechanics and chemistry. He subsequently joined his father's grocery business, which from time to time received enquiries for yeast: to meet these, Davidson began to manufacture yeast for sale and from that start built up a successful chemical manufacturing business with the emphasis on yeast and dyes. About 1837 he started to experiment first with electric batteries and then with motors. He invented a form of electromagnetic engine in which soft iron bars arranged on the periphery of a wooden cylinder, parallel to its axis, around which the cylinder could rotate, were attracted by fixed electromagnets. These were energized in turn by current controlled by a simple commutaring device. Electric current was produced by his batteries. His activities were brought to the attention of Michael Faraday and to the scientific world in general by a letter from Professor Forbes of King's College, Aberdeen. Davidson declined to patent his inventions, believing that all should be able freely to draw advantage from them, and in order to afford an opportunity for all interested parties to inspect them an exhibition was held at 36 Union Street, Aberdeen, in October 1840 to demonstrate his "apparatus actuated by electro-magnetic power". It included: a model locomotive carriage, large enough to carry two people, that ran on a railway; a turning lathe with tools for visitors to use; and a small printing machine. In the spring of 1842 he put on a similar exhibition in Edinburgh, this time including a sawmill. Davidson sought support from railway companies for further experiments and the construction of an electromagnetic locomotive; the Edinburgh exhibition successfully attracted the attention of the proprietors of the Edinburgh 585\& Glasgow Railway (E \& GR), whose line had been opened in February 1842. Davidson built a full-size locomotive incorporating his principle, apparently at the expense of the railway company. The locomotive weighed 7 tons: each of its two axles carried a cylinder upon which were fastened three iron bars, and four electromagnets were arranged in pairs on each side of the cylinders. The motors he used were reluctance motors, the power source being zinc-iron batteries. It was named Galvani and was demonstrated on the E \& GR that autumn, when it achieved a speed of 4 mph (6.4 km/h) while hauling a load of 6 tons over a distance of 1 1/2 miles (2.4 km); it was the first electric locomotive. Nevertheless, further support from the railway company was not forthcoming, although to some railway workers the locomotive seems to have appeared promising enough: they destroyed it in Luddite reaction. Davidson staged a further exhibition in London in 1843 without result and then, the cost of battery chemicals being high, ceased further experiments of this type. He survived long enough to see the electric railway become truly practicable in the 1880s.

[br]

PJGR / GW