Перевод: с английского на русский

с русского на английский

in+terms+of+production

  • 61 switchgear/controlgear

    1. НКУ распределения и управления

     

    низковольтное устройство распределения и управления (НКУ)
    Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
    [ ГОСТ Р МЭК 61439-1-2012]

    низковольтное устройство распределения и управления

    Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
    Примечания
    1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
    2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
    3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    power switchgear and controlgear assembly (PSC-assembly)
    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    [IEC 61439-2, ed. 1.0 (2009-01)]

    low-voltage switchgear and controlgear assembly
    combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
    [IEC 61892-3, ed. 2.0 (2007-11)]

    switchgear and controlgear
    a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEV number 441-11-01]

    switchgear and controlgear

    electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
    NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
    [IEV number 826-16-03 ]

    switchboard
    A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
    [ McGraw-Hill Dictionary of Architecture & Construction]

    switchboard
    One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
    [ The American Heritage Dictionary of the English Language]

    FR

    ensemble d'appareillage de puissance (ensemble PSC)
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    [IEC 61439-2, ed. 1.0 (2009-01)]

    appareillage, m
    matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
    NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
    [IEV number 826-16-03 ]

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEV number 441-11-01]


    A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
    Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
    The types of switchboards, classified by basic features of construction, are as follows:
    1. Live-front vertical panels
    2. Dead-front boards
    3. Safety enclosed boards( metal-clad)


    [American electricians’ handbook]

    Параллельные тексты EN-RU

    The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.

    Its definition, design and installation are based on precise rules; there is no place for improvisation.

    The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.

    It specifies in particular:

    > the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;

    > the design and verification rules, constituting a benchmark for product certification.

    All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.


    Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.

    A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.

    Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.

    What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

    [Schneider Electric]

    НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.

    Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.

    Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).

    В частности, он определяет:

    > распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;

    > конструкцию, технические характеристики, виды и методы испытаний НКУ.

    В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.

    Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.

    Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.

    Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.

    Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.

    [Перевод Интент]

     

    LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.

    The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.

    In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.

    Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.

    The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.

    [ABB]

    Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.

    Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам

    Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.

    Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются

    Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Действия

    Синонимы

    Сопутствующие термины

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

    Англо-русский словарь нормативно-технической терминологии > switchgear/controlgear

  • 62 voltage depression

    1. резкое снижение напряжения
    2. провал напряжения
    3. посадка напряжения

     

    посадка напряжения
    Внезапное значительное снижение напряжения в системе электроснабжения.
    [ ГОСТ 23875-88]

    EN

    voltage collapse
    sudden decrease in voltage leading to loss of voltage in the whole or a part of a power system
    NOTE – A cascading tripping of generating units and/or transmission lines usually occurs during voltage collapse.
    [IEV number 604-01-22 ]


    voltage depression
    system condition characterized by a sustained and significant lowering of voltage in the whole or part of a power system
    [IEV number 604-01-44]

    FR

    écroulement de la tension
    baisse soudaine de la tension conduisant à la disparition de la tension dans tout ou partie d'un réseau d'énergie électrique
    NOTE – Des déclenchements en cascade d'unités de production et/ou de lignes de transport d'énergie électrique se produisent généralement lors d'un écroulement de la tension.
    [IEV number 604-01-22 ]


    baisse profonde de la tension
    état d'un réseau d'énergie électrique caractérisé par une baisse durable et significative de la tension dans tout ou partie du réseau
    [IEV number 604-01-44]

    Тематики

    EN

    DE

    FR

    Смотри также

     

    провал напряжения
    Внезапное значительное снижение напряжения в системе электроснабжения с последующим его восстановлением.
    [ ГОСТ 23875-88]

    провал напряжения
    Внезапное понижение напряжения в точке электрической сети ниже 0,9 Uном, за которым следует восстановление напряжения до первоначального или близкого к нему уровня через промежуток времени от десяти миллисекунд до нескольких десятков секунд.
    [ ГОСТ 13109-97]

    провал напряжения
    Динамическое изменение напряжения в сети электропитания в виде снижения напряжения за нижний допустимый предел
    [ ГОСТ 19542-93

    провал напряжения
    Временное уменьшение напряжения в конкретной точке электрической системы ниже порогового значения.
    Примечание — Прерывание напряжения является особым случаем провала напряжения. Отличие прерывания напряжения от провала напряжения может быть установлено последующей обработкой результатов измерений.
    [ ГОСТ Р 51317.4.30-2008 (МЭК 61000-4-30:2008)]

    EN

    voltage dip
    a sudden reduction of the voltage at a point in an electrical system followed by voltage recovery after a short period of time from a few cycles to a few seconds
    Source: 604-01-25
    [IEV number 161-08-10]

    voltage dip
    temporary reduction of the voltage magnitude at a point in the electrical system below a threshold
    NOTE 1 Interruptions are a special case of a voltage dip. Post-processing may be used to distinguish between voltage dips and interruptions.
    NOTE 2 A voltage dip is also referred to as sag. The two terms are considered interchangeable; however, this standard will only use the term voltage dip
    [IEC 61000-4-30, ed. 2.0 (2008-10)]

    FR

    creux de tension
    baisse brutale de la tension en un point d'un réseau d'énergie électrique, suivie d'un rétablissement de la tension après un court laps de temps de quelques périodes à quelques secondes
    Source: 604-01-25
    [IEV number 161-08-10]

    creux de tension
    baisse temporaire de l’amplitude de la tension en un point du réseau d’énergie électrique en dessous d’un seuil donné
    NOTE 1 Les interruptions sont un cas particulier des creux de tension. Les traitements ultérieurs permettent de faire la distinction entre creux de tension et interruption.
    NOTE 2 La Note 2 s'applique uniquement à la version anglaise.
    [IEC 61000-4-30, ed. 2.0 (2008-10)]

    4956
    Провал напряжения

    Недопустимые, нерекомендуемые

    Примечание(1)- Мнение автора карточки

    Тематики

    Обобщающие термины

    EN

    DE

    FR

    Смотри также

     

    резкое снижение напряжения

    [Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

    Тематики

    • электротехника, основные понятия

    EN

    Англо-русский словарь нормативно-технической терминологии > voltage depression

  • 63 constant current

    1. ток постоянной величины
    2. постоянный ток

     

    постоянный ток
    Электрический ток, не изменяющийся во времени.
    Примечание — Аналогично определяют постоянные электрическое напряжение, электродвижущую силу, магнитный поток и т. д.
    [ ГОСТ Р 52002-2003]

    Параллельные тексты EN-RU

    For definition, the electric current called “direct” has a unidirectional trend constant in time.
    As a matter of fact, by analyzing the motion of the charges at a point crossed by a direct current, it results that the quantity of charge (Q) flowing through that point (or better, through that cross section) in each instant is always the same.

    [ABB]

    Постоянным током называется электрический ток, значение и направление которого, не изменяются во времени.
    Если рассматривать постоянный ток как прохождение элементарных электрических зарядов через определенную точку, то значение заряда (Q), протекающего через эту точку (а вернее через это поперечное сечение проводника) за единицу времени будет постоянным.

    [Перевод Интент]

    Direct current, which was once the main means of distributing electric power, is still widespread today in the electrical plants supplying particular industrial applications.

    The advantages in terms of settings, offered by the employ of d.c. motors and by supply through a single line, make direct current supply a good solution for railway and underground systems, trams, lifts and other transport means.

    In addition, direct current is used in conversion plants (installations where different types of energy are converted into electrical direct energy, e.g. photovoltaic plants) and, above all, in those emergency applications where an auxiliary energy source is required to supply essential services, such as protection systems, emergency lighting, wards and factories, alarm systems, computer centers, etc..

    Accumulators - for example – constitute the most reliable energy source for these services, both directly in direct current as well as by means of uninterruptible power supply units (UPS), when loads are supplied in alternating current.

    [ABB]

    Когда-то электрическая энергия передавалась и распределялась только на постоянном токе. Но и в настоящее время в отдельных отраслях промышленности постоянный ток применяется достаточно широко.

    Возможности использования двигателей постоянного тока и передачи электроэнергии по линии с меньшим числом проводников дают неоспоримые преимущества при электроснабжении железных дорог, подземного транспорта, трамваев, лифтов и т. д.

    Кроме того, существуют источники постоянного тока, являющиеся преобразователями различных видов энергии непосредственно в электрическую энергию, например, фотоэлектрические станции. Дополнительные источники постоянного тока применяют в аварийных ситуациях для питания систем защиты, аварийного освещения жилых районов и на производстве, систем сигнализации, компьютерных центров и т. д.

    Для решения указанных задач наиболее подходящим источником электроэнергии является аккумулятор. Нагрузки постоянного тока получают электропитание непосредственно от аккумулятора. Нагрузки переменного тока – от источника бесперебойного питания (ИБП), частью которого является аккумулятор.

    [Перевод Интент]

    Direct current can be generated:
    - by using batteries or accumulators where the current is generated directly through chemical processes;
    - by the rectification of alternating current through rectifiers (static conversion);
    - by the conversion of mechanical work into electrical energy using dynamos (production through rotating machines).

    [ABB]

    Постоянный ток можно получить следующими способами:
    - от аккумуляторов, в которых электрическая энергия образуется за счет происходящих внутри аккумулятора химических реакций;
    - выпрямлением переменного тока с помощью выпрямителей (статических преобразователей);
    - преобразованием механической энергии в электрическую с помощью генераторов постоянного тока (вращающихся машин).

    [Перевод Интент]

    In the low voltage field, direct current is used for different applications, which, in the following pages, have been divided into four macrofamilies including:

    - conversion into other forms of electrical energy (photovoltaic plants, above all where accumulator batteries are used);
    - electric traction (tram-lines, underground railways, etc.);
    - supply of emergency or auxiliary services;
    - particular industrial installations (electrolytic processes, etc.).

    [ABB]

    Можно выделить четыре области применения постоянного тока в низковольтных электроустановках:

    - преобразование различных видов энергии в электрическую (фотоэлектрические установки с аккумуляторными батареями);
    - энергоснабжение транспорта на электрической тяге (трамваи, метро и т. д.)
    - электропитание аварийных или вспомогательных служб;
    - специальные промышленные установки (например, с использованием электролитических процессов и т. п.).

    [Интент]

    Тематики

    • электротехника, основные понятия

    Синонимы

    EN

     

    ток постоянной величины
    неизменный ток


    [Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

    Тематики

    • электротехника, основные понятия

    Синонимы

    EN

    Англо-русский словарь нормативно-технической терминологии > constant current

  • 64 direct current

    1. постоянный ток

     

    постоянный ток
    Электрический ток, не изменяющийся во времени.
    Примечание — Аналогично определяют постоянные электрическое напряжение, электродвижущую силу, магнитный поток и т. д.
    [ ГОСТ Р 52002-2003]

    Параллельные тексты EN-RU

    For definition, the electric current called “direct” has a unidirectional trend constant in time.
    As a matter of fact, by analyzing the motion of the charges at a point crossed by a direct current, it results that the quantity of charge (Q) flowing through that point (or better, through that cross section) in each instant is always the same.

    [ABB]

    Постоянным током называется электрический ток, значение и направление которого, не изменяются во времени.
    Если рассматривать постоянный ток как прохождение элементарных электрических зарядов через определенную точку, то значение заряда (Q), протекающего через эту точку (а вернее через это поперечное сечение проводника) за единицу времени будет постоянным.

    [Перевод Интент]

    Direct current, which was once the main means of distributing electric power, is still widespread today in the electrical plants supplying particular industrial applications.

    The advantages in terms of settings, offered by the employ of d.c. motors and by supply through a single line, make direct current supply a good solution for railway and underground systems, trams, lifts and other transport means.

    In addition, direct current is used in conversion plants (installations where different types of energy are converted into electrical direct energy, e.g. photovoltaic plants) and, above all, in those emergency applications where an auxiliary energy source is required to supply essential services, such as protection systems, emergency lighting, wards and factories, alarm systems, computer centers, etc..

    Accumulators - for example – constitute the most reliable energy source for these services, both directly in direct current as well as by means of uninterruptible power supply units (UPS), when loads are supplied in alternating current.

    [ABB]

    Когда-то электрическая энергия передавалась и распределялась только на постоянном токе. Но и в настоящее время в отдельных отраслях промышленности постоянный ток применяется достаточно широко.

    Возможности использования двигателей постоянного тока и передачи электроэнергии по линии с меньшим числом проводников дают неоспоримые преимущества при электроснабжении железных дорог, подземного транспорта, трамваев, лифтов и т. д.

    Кроме того, существуют источники постоянного тока, являющиеся преобразователями различных видов энергии непосредственно в электрическую энергию, например, фотоэлектрические станции. Дополнительные источники постоянного тока применяют в аварийных ситуациях для питания систем защиты, аварийного освещения жилых районов и на производстве, систем сигнализации, компьютерных центров и т. д.

    Для решения указанных задач наиболее подходящим источником электроэнергии является аккумулятор. Нагрузки постоянного тока получают электропитание непосредственно от аккумулятора. Нагрузки переменного тока – от источника бесперебойного питания (ИБП), частью которого является аккумулятор.

    [Перевод Интент]

    Direct current can be generated:
    - by using batteries or accumulators where the current is generated directly through chemical processes;
    - by the rectification of alternating current through rectifiers (static conversion);
    - by the conversion of mechanical work into electrical energy using dynamos (production through rotating machines).

    [ABB]

    Постоянный ток можно получить следующими способами:
    - от аккумуляторов, в которых электрическая энергия образуется за счет происходящих внутри аккумулятора химических реакций;
    - выпрямлением переменного тока с помощью выпрямителей (статических преобразователей);
    - преобразованием механической энергии в электрическую с помощью генераторов постоянного тока (вращающихся машин).

    [Перевод Интент]

    In the low voltage field, direct current is used for different applications, which, in the following pages, have been divided into four macrofamilies including:

    - conversion into other forms of electrical energy (photovoltaic plants, above all where accumulator batteries are used);
    - electric traction (tram-lines, underground railways, etc.);
    - supply of emergency or auxiliary services;
    - particular industrial installations (electrolytic processes, etc.).

    [ABB]

    Можно выделить четыре области применения постоянного тока в низковольтных электроустановках:

    - преобразование различных видов энергии в электрическую (фотоэлектрические установки с аккумуляторными батареями);
    - энергоснабжение транспорта на электрической тяге (трамваи, метро и т. д.)
    - электропитание аварийных или вспомогательных служб;
    - специальные промышленные установки (например, с использованием электролитических процессов и т. п.).

    [Интент]

    Тематики

    • электротехника, основные понятия

    Синонимы

    EN

    Англо-русский словарь нормативно-технической терминологии > direct current

  • 65 demand

    1. электропотребление
    2. требовать
    3. среднее значение величины за определенное время
    4. потребность
    5. потребляемая мощность
    6. потребление электроэнергии

     

    потребление электроэнергии
    Означает национальное производство электроэнергии, включая автопроизводство, плюс импорт, минус экспорт (валовое национальное потребление электроэнергии) (Директива 2001/77/ЕС).
    [Англо-русский глосcарий энергетических терминов ERRA]

    EN

    consumption of electricity
    Shall mean national electricity production, including autoproduction, plus imports, minus exports (gross national electricity consumption) (Directive 2001/77/EC).
    [Англо-русский глосcарий энергетических терминов ERRA]

    electricity consumption
    Amount of electricity consumed by an apparatus. (Source: PHC)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Параллельные тексты EN-RU

    Specific applications can make high demands of a data centre solution.
    [Legrand]

    Специфика центров обработки данных заключается в высоком потреблении электроэнергии.
    [Перевод Интент]


    Недопустимые, нерекомендуемые

    Тематики

    EN

    DE

    FR

     

    потребляемая мощность
    Общая мощность, получаемая устройством или совокупностью устройств.
    [ОСТ 45.55-99]

    потребляемая мощность (электрическая)
    Коэффициент, по которому электроэнергия поставляется в систему или системой, частью системы или единицей оборудования. Потребляемая мощность выражается в кВТ, кВА, или других подходящих единицах на заданный момент, или в течение определенного периода времени. Основным источником "потребляемой мощности" является энергопотребляющее оборудование потребителей (Термины Рабочей Группы правового регулирования ЭРРА).
    [Англо-русский глосcарий энергетических терминов ERRA]

    EN

    demand (electric)
    The rate at which electric energy is delivered to or by a system, part of a system, or a piece of equipment. Demand is expressed in kW, kVA, or other suitable units at a given instant or over any designated period of time. The primary source of "demand" is the power-consuming equipment of the customers (ERRA Legal Regulation Working Group Terms).
    [Англо-русский глосcарий энергетических терминов ERRA]

    demand
    the magnitude of an electricity supply, expressed in kilowatts or kilovoltamperes
    [IEV ref 691-02-02]

    FR

    puissance
    importance d'une fourniture d'électricité, exprimée en kilowatts ou kilovoltampères
    [IEV ref 691-02-02]

    Параллельные тексты EN-RU

    Power demand is the energy accumulated during a specified period divided by the length of the period.
    [Schneider Electric]

    Потребляемая мощность – это значение электрической энергии, потребленной за определенный период, поделенное на продолжительность этого периода.
    [Перевод Интент]


    Тематики

    EN

    FR

     

    потребность

    [Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

    Тематики

    • электротехника, основные понятия

    EN

     

    требовать

    [А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]

    Тематики

    EN

     

    электропотребление

    [Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

    Тематики

    • электротехника, основные понятия

    EN

     

    среднее значение величины за определенное время
    -

    [Интент]

    EN

    demand
    Aaverage value of a quantity, such as power, over a specified interval of time.
    [Schneider Electric]

    Тематики

    EN

    Англо-русский словарь нормативно-технической терминологии > demand

  • 66 drawback procedure

    1. процедура возврата (пошлины)

     

    процедура возврата (пошлины)
    Таможенная процедура, предусматривающая при экспорте товаров возврат (полный или частичный) в отношении импортных пошлин и налогов, взысканных с товаров или материалов, содержащихся в них или использованных при их производстве (Глава 3 Специального приложения F к Пересмотренной Киотской конвенции)
    [Упрощение процедур торговли: англо-русский глоссарий терминов (пересмотренное второе издание) НЬЮ-ЙОРК, ЖЕНЕВА, МОСКВА 2011 год]

    EN

    drawback procedure
    The customs procedure which, when goods are exported, provides for a repayment (total or partial) to be made in respect of the import duties and taxes charged on the goods, or on materials contained in them or consumed in their production (Specific annex f, Chapter 3, to the Revised Kyoto Convention)
    [Trade Facilitation Terms: An English - Russian Glossary (revised second edition) NEW YORK, GENEVA, MOSCOW 2331]

    Тематики

    EN

    Англо-русский словарь нормативно-технической терминологии > drawback procedure

  • 67 trade barrier

    1. торговый барьер

     

    торговый барьер

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    trade barrier
    An artificial restraint on the free exchange of goods and services between nations. The most common types of trade barriers are tariffs, quotas, and exchange control. Such obstacles to trade are usually imposed by a country that wishes to protect domestic products in their home market against foreign competition, better its terms of trade, reduce domestic unemployment, or improve its balance-of-payments position. The raising of trade barriers by one country often provokes other nations position. Generally, the effect of a trade barrier is to reduce the volume of trade while increasing the domestic price of the protected good. Thus, it results in a relatively inefficient allocation of world resources and reduces the level of total world income and production. (Source: GREENW)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

    Англо-русский словарь нормативно-технической терминологии > trade barrier

  • 68 energy costs

    1. энергетические затраты

     

    энергетические затраты
    Затраты, такие как на топливо, которые связаны с производством или потреблением электроэнергии и варьируются вместе с ними (Термины Рабочей Группы правового регулирования ЭРРА).
    [Англо-русский глосcарий энергетических терминов ERRA]

    EN

    energy costs
    Costs, such as for fuel, that are related to and vary with energy production or consumption (ERRA Legal Regulation Working Group Terms).
    [Англо-русский глосcарий энергетических терминов ERRA]

    Тематики

    EN

    Англо-русский словарь нормативно-технической терминологии > energy costs

  • 69 energy efficiency

    1. эффективность потребления энергии
    2. эффективность использования энергии
    3. эффективность использования электроэнергии
    4. энергоэффективные решения
    5. энергетический КПД
    6. энергетический выход

     

    энергетический КПД
    энергоэффективность


    [А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]

    Тематики

    Синонимы

    EN

     

    энергетический выход
    энергетический кпд


    [Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

    Тематики

    • электротехника, основные понятия

    Синонимы

    EN

     

    эффективность использования энергии

    [ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    EN

    energy efficiency
    Refers to actions to save fuels by better building design, the modification of production processes, better selection of road vehicles and transport policies, the adoption of district heating schemes in conjunction with electrical power generation, and the use of domestic insulation and double glazing in homes. (Source: WRIGHT)
    [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]

    Тематики

    EN

    DE

    FR

     

    эффективность потребления энергии
    Программы, снижающие потребление Термины Рабочей Группы правового регулирования ЭРРА).
    [Англо-русский глосcарий энергетических терминов ERRA]

    EN

    energy efficiency
    Programs that reduce consumption (ERRA Legal Regulation Working Group Terms).
    [Англо-русский глосcарий энергетических терминов ERRA]

    Тематики

    EN

    Англо-русский словарь нормативно-технической терминологии > energy efficiency

См. также в других словарях:

  • Production leveling — Production leveling, also known as production smoothing or – by its Japanese original term – heijunka (平準化?),[1] is a technique for reducing the muda waste and vital to the development of production efficiency in the Toyota Production System and… …   Wikipedia

  • production payment — Under Title 11 U.S.C. Section 101: (42A) The term production payment means a term overriding royalty satisfiable in cash or in kind (A) contingent on the production of a liquid or gaseous hydrocarbon from particular real property; and (B) from a… …   Glossary of Bankruptcy

  • production sharing agreement — (PSA) USA An agreement between a government and a company in which the government awards to the company the right to extract and develop a natural resource (for example, mineral ore or oil). Under a PSA, the company bears the financial risk of… …   Law dictionary

  • production — ► NOUN 1) the action of producing or the process of being produced. 2) the amount of something produced. 3) a film, record, or play, viewed in terms of its making or staging …   English terms dictionary

  • Production–possibility frontier — In economics, a production–possibility frontier (PPF), sometimes called a production–possibility curve or product transformation curve, is a graph that compares the production rates of two commodities that use the same fixed total of the factors… …   Wikipedia

  • Production-possibility frontier — In economics, a production possibility frontier (PPF) or “transformation curve” is a graph that shows the different rates of production of two goods that an economy (or agent) could efficiently produce with limited productive resources. Points… …   Wikipedia

  • production, theory of — ▪ economics Introduction       in economics, an effort to explain the principles by which a business firm decides how much of each commodity that it sells (its “outputs” or “products”) it will produce, and how much of each kind of labour, raw… …   Universalium

  • Terms of Endearment — Infobox Film name = Terms of Endearment caption = Theatrical release poster director = James L. Brooks producer = James L. Brooks writer = James L. Brooks Larry McMurtry starring = Shirley MacLaine Debra Winger Jack Nicholson Danny DeVito Jeff… …   Wikipedia

  • Terms of trade — In international economics and international trade, terms of trade or TOT is the relative prices of a country s export to import. Terms of trade are sometimes used as a proxy for the relative social welfare of a country, but this heuristic is… …   Wikipedia

  • Terms of Endearment (Drawn Together episode) — Infobox Television episode Title=Terms of Endearment Series=Drawn Together Season=2 Episode=8 Airdate= January 25, 2006 (supposed to air December 8, 2004) Writer= Sam Freiberger and Bill Freiberger Caption = Foxxy as a minstrel show stereotype.… …   Wikipedia

  • Production function — Graph of Total, Average, and Marginal Product In microeconomics and macroeconomics, a production function is a function that specifies the output of a firm, an industry, or an entire economy for all combinations of inputs. This function is an… …   Wikipedia

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»