in+early+june

SUBJECT AREA: Electricity

[br]

[br]

[br]

Crookes entered the Royal College of Chemistry at the age of 15, and from 1850 to 1854 held the appointment of Assistant at the college. In 1854 he became Superintendent of the Meteorological Department at the Radcliffe Observatory in Oxford. He moved to a post at the College of Science in Chester the following year. Soon after this he inherited a large fortune and set up his own private laboratory in London. There he studied the nature of electrical discharges in gases at low pressure and discovered the dark space (later named after him) that surrounds the negative electrode, or cathode. He also established that the rays produced in the process (subsequently shown by J.J.Thompson to be a stream of electrons) not only travelled in straight lines, but were also capable of producing heat and/or light upon impact with suitable anode materials. Using a variety of new methods to investigate these "cathode" rays, he applied them to the spectral analysis of compounds of selenium and, as a result, in 1861 he discovered the element thallium, finally establishing its atomic weight in 1873. Following his discovery of thallium, he became involved in two main lines of research: the properties of rarified gases, and the investigation of the elements of the "rare earths". It was also during these experiments that he discovered the principle of the Crookes radiometer, a device in which light is converted into rotational motion and which used to be found frequently in the shop windows of English opticians. Also among the fruits of this work were the Crookes tubes and the development of spectacle lenses with differential ranges of radiational absorption. In the 1870s he became interested in spiritualism and acquired a reputation for his studies of psychic phenomena, but at the turn of the century he returned to traditional scientific investigations. In 1892 he wrote about the possibility of wireless telegraphy. His work in the field of radioactivity led to the invention of the spinthariscope, an early type of detector of alpha particles. In 1900 he undertook investigations into uranium which led to the study of scintillation, an important tool in the study of radioactivity.

While the theoretical basis of his work has not stood the test of time, his material discoveries, observations and investigations of new facts formed a basis on which others such as J.J. Thomson were to develop subatomic theory. His later involvement in the investigation of spiritualism led to much criticism, but could be justified on the basis of a belief in the duty to investigate all phenomena.

[br]

KF / MG

SUBJECT AREA: Aerospace

[br]

[br]

[br]

Curtiss started his career in the bicycle business, then became a designer of motor-cycle engines, and in 1904 he designed and built an airship engine. The success of his engine led to him joining the Aerial Experimental Association (AEA), founded by the inventor Alexander Graham Bell. Working with the AEA, Curtiss built several engines and designed a biplane, June Bug, in which he won a prize for the first recorded flight of over 1 km (1,100yd) in the USA. In 1909 Curtiss joined forces with Augustus M.Herring, who had earlier flown Octave Chanute's gliders, to form the Herring-Curtiss Company. Their Gold Bug was a success and led to the Golden Flyer, in which Glenn Curtiss won the Gordon Bennett Cup at Rheims in France with a speed of 75.7 km/h (47 mph). At this time the Wright brothers accused Curtiss and the new Curtiss Aeroplane Company of infringing their patent rights, and a bitter lawsuit ensued. The acrimony subsided during the First World War and in 1929 the two companies merged to form the Curtiss-Wright Corporation.

Curtiss had started experimenting with water-based aircraft in 1908, but it was not until 1911 that he managed to produce a successful float-plane. He then co-operated with the US Navy in developing catapults to launch aircraft from ships at sea. During the First World War, Curtiss produced the JN-4 Jenny trainer, which became probably his best-known design. This sturdy bi-plane continued in service long after the war and was extensively used by "barnstorming" pilots at air shows and for early mail flights. In 1919 a Navy-Curtiss NC-4 flying boat achieved the first flight across the Atlantic, having made the crossing in stages, refuelling en route. Curtiss himself, however, had little interest in aviation in his later years and turned his attention to real-estate development in Florida.

[br]

SUBJECT AREA: Photography, film and optics

[br]

[br]

[br]

Dagron studied chemistry, but little else is known of his early career. He was the proprietor of a Paris shop selling stationery and office equipment in 1860, when he proposed making microscopic photographs mounted in jewellery. Dagron went on to produce examples using equipment constructed by the optician Debozcq. In 1864 Dagron became one of the celebrities of the day when he recorded 450 portraits on a single photograph that measured 1 mm³. The image was viewed by means of a tiny magnifying lens popularly known as a "Stanhope" after its supposed inventor, the English Lord Charles Stanhope. The great demand for Stanhoped jewellery soon allowed Dagron to build a factory for its manufacture. Dagron's main claim to fame rests on his work during the Franco-Prussian War. At the siege of Paris, Dagron was ballooned out of the city to organize a carrier-pigeon communication service. Thousands of microphotographed dispatches could be carried by a single pigeon, and Dagron set up a regular service between Paris and Tours. In Paris the messages from the outside world were enlarged and projected onto a white wall and transcribed by a team of clerks. After the war, Dagron dabbled in aerial photography from balloons, but his interest in microphotography continued until his death in 1900.

[br]

SUBJECT AREA: Ports and shipping

[br]

[br]

[br]

Davis was the son of a detective with the City of London police. At the age of 11 he entered the employment of Siebe, Gorman \& Co., manufacturers of diving and other safety equipment since 1819, at their Lambeth works. By good fortune, his neat handwriting attracted the notice of Mr Gorman and he was transferred to work in the office. He studied hard after working hours and rose steadily in the firm. In his twenties he was promoted to Assistant Manager, then General Manager, Managing Director and finally Governing Director. He retired in 1960, having been made Life President the previous year, and continued to attend the office regularly until May 1964.

Davis's entire career was devoted to research and development in the firm's special field. In 1906 he perfected the first practicable oxygen-breathing apparatus for use in mine rescue; it was widely adopted and with modifications was still in use in the 1990s. With Professor Leonard Hill he designed a deep-sea diving-bell incorporating a decompression chamber. He also invented an oxygen-breathing apparatus and heated apparel for airmen flying at high altitudes.

Immediately after the first German gas attacks on the Western Front in April 1915, Davis devised a respirator, known as the stocking skene or veil mask. He quickly organized the mass manufacture of this device, roping in members of his family and placing the work in the homes of Lambeth: within 48 hours the first consignment was being sent off to France.

He was a member of the Admiralty Deep Sea Diving Committee, which in 1933 completed tables for the safe ascent of divers with oxygen from a depth of 300 ft (91 m). They were compiled by Davis in conjunction with Professors J.B.S.Haldane and Leonard Hill and Captain G.C.Damant, the Royal Navy's leading diving expert. With revisions these tables have been used by the Navy ever since. Davis's best-known invention was first used in 1929: the Davis Submarine Escape Apparatus. It became standard equipment on submarines until it was replaced by the Built-in Breathing System, which the firm began manufacturing in 1951.

The firm's works were bombed during the Second World War and were re-established at Chessington, Surrey. The extensive research facilities there were placed at the disposal of the Royal Navy and the Admiralty Experimental Diving Unit. Davis worked with Haldane and Hill on problems of the underwater physiology of working divers. A number of inventions issued from Chessington, such as the human torpedo, midget submarine and human minesweeper. In the early 1950s the firm helped to pioneer the use of underwater television to investigate the sinking of the submarine Affray and the crashed Comet jet airliners.

[br]

SUBJECT AREA: Photography, film and optics

[br]

[br]

[br]

The young Eastman was a clerk-bookkeeper in the Rochester Savings Bank when in 1877 he took up photography. Taking lessons in the wet-plate process, he became an enthusiastic amateur photographer. However, the cumbersome equipment and noxious chemicals used in the process proved an obstacle, as he said, "It seemed to be that one ought to be able to carry less than a pack-horse load." Then he came across an account of the new gelatine dry-plate process in the British Journal of Photography of March 1878. He experimented in coating glass plates with the new emulsions, and was soon so successful that he decided to go into commercial manufacture. He devised a machine to simplify the coating of the plates, and travelled to England in July 1879 to patent it. In April 1880 he prepared to begin manufacture in a rented building in Rochester, and contacted the leading American photographic supply house, E. \& H.T.Anthony, offering them an option as agents. A local whip manufacturer, Henry A.Strong, invested $1,000 in the enterprise and the Eastman Dry Plate Company was formed on 1 January 1881. Still working at the Savings Bank, he ran the business in his spare time, and demand grew for the quality product he was producing. The fledgling company survived a near disaster in 1882 when the quality of the emulsions dropped alarmingly. Eastman later discovered this was due to impurities in the gelatine used, and this led him to test all raw materials rigorously for quality. In 1884 the company became a corporation, the Eastman Dry Plate \& Film Company, and a new product was announced. Mindful of his desire to simplify photography, Eastman, with a camera maker, William H.Walker, designed a roll-holder in which the heavy glass plates were replaced by a roll of emulsion-coated paper. The holders were made in sizes suitable for most plate cameras. Eastman designed and patented a coating machine for the large-scale production of the paper film, bringing costs down dramatically, the roll-holders were acclaimed by photographers worldwide, and prizes and medals were awarded, but Eastman was still not satisfied. The next step was to incorporate the roll-holder in a smaller, hand-held camera. His first successful design was launched in June 1888: the Kodak camera. A small box camera, it held enough paper film for 100 circular exposures, and was bought ready-loaded. After the film had been exposed, the camera was returned to Eastman's factory, where the film was removed, processed and printed, and the camera reloaded. This developing and printing service was the most revolutionary part of his invention, since at that time photographers were expected to process their own photographs, which required access to a darkroom and appropriate chemicals. The Kodak camera put photography into the hands of the countless thousands who wanted photographs without complications. Eastman's marketing slogan neatly summed up the advantage: "You Press the Button, We Do the Rest." The Kodak camera was the last product in the design of which Eastman was personally involved. His company was growing rapidly, and he recruited the most talented scientists and technicians available. New products emerged regularly—notably the first commercially produced celluloid roll film for the Kodak cameras in July 1889; this material made possible the introduction of cinematography a few years later. Eastman's philosophy of simplifying photography and reducing its costs continued to influence products: for example, the introduction of the one dollar, or five shilling, Brownie camera in 1900, which put photography in the hands of almost everyone. Over the years the Eastman Kodak Company, as it now was, grew into a giant multinational corporation with manufacturing and marketing organizations throughout the world. Eastman continued to guide the company; he pursued an enlightened policy of employee welfare and profit sharing decades before this was common in industry. He made massive donations to many concerns, notably the Massachusetts Institute of Technology, and supported schemes for the education of black people, dental welfare, calendar reform, music and many other causes, he withdrew from the day-to-day control of the company in 1925, and at last had time for recreation. On 14 March 1932, suffering from a painful terminal cancer and after tidying up his affairs, he shot himself through the heart, leaving a note: "To my friends: My work is done. Why wait?" Although Eastman's technical innovations were made mostly at the beginning of his career, the organization which he founded and guided in its formative years was responsible for many of the major advances in photography over the years.

[br]

SUBJECT AREA: Aerospace

[br]

[br]

[br]

After obtaining a degree in engineering, Fabre specialized in hydrodynamics. Around 1904 he developed an interest in flying and followed the progress of early French aviators such as Archdeacon, Voisin and Blériot who were experimenting with float-gliders. Fabre carried out many experiments during the following years, including airflow tests on various surfaces and hydrodynamic tests on different designs for floats. He also built a propeller-driven motor car to develop the most efficient design for a propeller. In 1909 he built his first "hydro-aeroplane", but it failed to fly. By March 1910 he built a new float plane which was very different from contemporary French aeroplanes. It was a tail-first (canard) monoplane and had unusual Warren girder spars exposed to the airstream. The engine was a conventional Gnome rotary mounted at the rear of the machine. On 28 March 1910 Fabre, who had no previous experience of flying, decided he was ready to test his hydro-aeroplane. First he made several straight runs to test the planing properties of his three floats, then he made several short hops. In the afternoon Fabre took off from the harbour at La Mède near Marseille before official witnesses: he was able to claim the first flight by a powered seaplane. His hydro-aeroplane is preserved in the Musée de l'Air et de l'Espace in Paris.

Despite several accidents, Fabre continued to improve his design and in October of 1910 Glenn Curtiss, the American designer, visited Fabre to compare notes. A year later Curtiss built the first of his many successful seaplanes. Fabre did not continue as an aircraft designer, but he went on to design and manufacture floats for other people.

[br]

SUBJECT AREA: Ports and shipping

[br]

[br]

[br]

Following his education at Brisbane Academy in Largs, William Fife (the third generation of the name) became apprenticed at the age of 14 to the already famous yacht-building yard owned by his family at Fairlie in Ayrshire. On completion of his apprenticeship, he joined the Paisley shipbuilders John Fullerton \& Co. to gain experience in iron shipbuilding before going on as Manager to the Marquis of Ailsa's Culzean Steam Launch and Yacht Works. Initially the works was sited below the famous castle at Culzean, but some years later it moved a few miles along the Ayrshire Coast to Maidens. The Culzean Company was wound up in 1887 and Fife then returned to the family yard, where he remained for the rest of his working life. Many outstanding yachts were the product of his hours on the drawing board, including auxiliary sailing cruisers, motor yachts and well-known racing craft. The most outstanding designs were for two of Sir Thomas Lipton's challengers for the America's Cup: Shamrock I and Shamrock III. The latter yacht was tested at the Ship Model Experiment Tank owned by Denny of Dumbarton before being built at their Leven Shipyard in 1903. Shamrock III may have been one of the earliest America's Cup yachts to have been designed with a high level of scientific input. The hull construction was unusual for the early years of the twentieth century, being of alloy steel with decks of aluminium.

William Fife was decorated for his service to shipbuilding during the First World War. With the onset of the Great Depression the shipyard's output slowed, and in the 1930s it was sold to other interests; this was the end of the 120-year Fife dynasty.

[br]

SUBJECT AREA: Automotive engineering, Land transport

[br]

[br]

[br]

He was the son of an Irish immigrant farmer, William Ford, and the oldest son to survive of Mary Litogot; his mother died in 1876 with the birth of her sixth child. He went to the village school, and at the age of 16 he was apprenticed to Flower brothers' machine shop and then at the Drydock \& Engineering Works in Detroit. In 1882 he left to return to the family farm and spent some time working with a 1 1/2 hp steam engine doing odd jobs for the farming community at $3 per day. He was then employed as a demonstrator for Westinghouse steam engines. He met Clara Jane Bryant at New Year 1885 and they were married on 11 April 1888. Their only child, Edsel Bryant Ford, was born on 6 November 1893.

At that time Henry worked on steam engine repairs for the Edison Illuminating Company, where he became Chief Engineer. He became one of a group working to develop a "horseless carriage" in 1896 and in June completed his first vehicle, a "quadri cycle" with a two-cylinder engine. It was built in a brick shed, which had to be partially demolished to get the carriage out.

Ford became involved in motor racing, at which he was more successful than he was in starting a car-manufacturing company. Several early ventures failed, until the Ford Motor Company of 1903. By October 1908 they had started with production of the Model T. The first, of which over 15 million were built up to the end of its production in May 1927, came out with bought-out steel stampings and a planetary gearbox, and had a one-piece four-cylinder block with a bolt-on head. This was one of the most successful models built by Ford or any other motor manufacturer in the life of the motor car.

Interchangeability of components was an important element in Ford's philosophy. Ford was a pioneer in the use of vanadium steel for engine components. He adopted the principles of Frederick Taylor, the pioneer of time-and-motion study, and installed the world's first moving assembly line for the production of magnetos, started in 1913. He installed blast furnaces at the factory to make his own steel, and he also promoted research and the cultivation of the soya bean, from which a plastic was derived.

In October 1913 he introduced the "Five Dollar Day", almost doubling the normal rate of pay. This was a profit-sharing scheme for his employees and contained an element of a reward for good behaviour. About this time he initiated work on an agricultural tractor, the "Fordson" made by a separate company, the directors of which were Henry and his son Edsel.

In 1915 he chartered the Oscar II, a "peace ship", and with fifty-five delegates sailed for Europe a week before Christmas, docking at Oslo. Their objective was to appeal to all European Heads of State to stop the war. He had hoped to persuade manufacturers to replace armaments with tractors in their production programmes. In the event, Ford took to his bed in the hotel with a chill, stayed there for five days and then sailed for New York and home. He did, however, continue to finance the peace activists who remained in Europe. Back in America, he stood for election to the US Senate but was defeated. He was probably the father of John Dahlinger, illegitimate son of Evangeline Dahlinger, a stenographer employed by the firm and on whom he lavished gifts of cars, clothes and properties. He became the owner of a weekly newspaper, the Dearborn Independent, which became the medium for the expression of many of his more unorthodox ideas. He was involved in a lawsuit with the Chicago Tribune in 1919, during which he was cross-examined on his knowledge of American history: he is reputed to have said "History is bunk". What he actually said was, "History is bunk as it is taught in schools", a very different comment. The lawyers who thus made a fool of him would have been surprised if they could have foreseen the force and energy that their actions were to release. For years Ford employed a team of specialists to scour America and Europe for furniture, artefacts and relics of all kinds, illustrating various aspects of history. Starting with the Wayside Inn from South Sudbury, Massachusetts, buildings were bought, dismantled and moved, to be reconstructed in Greenfield Village, near Dearborn. The courthouse where Abraham Lincoln had practised law and the Ohio bicycle shop where the Wright brothers built their first primitive aeroplane were added to the farmhouse where the proprietor, Henry Ford, had been born. Replicas were made of Independence Hall, Congress Hall and the old City Hall in Philadelphia, and even a reconstruction of Edison's Menlo Park laboratory was installed. The Henry Ford museum was officially opened on 21 October 1929, on the fiftieth anniversary of Edison's invention of the incandescent bulb, but it continued to be a primary preoccupation of the great American car maker until his death.

Henry Ford was also responsible for a number of aeronautical developments at the Ford Airport at Dearborn. He introduced the first use of radio to guide a commercial aircraft, the first regular airmail service in the United States. He also manufactured the country's first all-metal multi-engined plane, the Ford Tri-Motor.

Edsel became President of the Ford Motor Company on his father's resignation from that position on 30 December 1918. Following the end of production in May 1927 of the Model T, the replacement Model A was not in production for another six months. During this period Henry Ford, though officially retired from the presidency of the company, repeatedly interfered and countermanded the orders of his son, ostensibly the man in charge. Edsel, who died of stomach cancer at his home at Grosse Point, Detroit, on 26 May 1943, was the father of Henry Ford II. Henry Ford died at his home, "Fair Lane", four years after his son's death.

[br]

SUBJECT AREA: Architecture and building, Civil engineering, Railways and locomotives

[br]

[br]

[br]

Fox was a pupil of John Ericsson, helped to build the locomotive Novelty, and drove it at the Rainhill Trials in 1829. He became a driver on the Liverpool \& Manchester Railway and then a pupil of Robert Stephenson, who appointed him an assistant engineer for construction of the southern part of the London \& Birmingham Railway, opened in 1837. He was probably responsible for the design of the early bow-string girder bridge which carried the railway over the Regent's Canal. He also invented turnouts with switch blades, i.e. "points". With Robert Stephenson he designed the light iron train sheds at Euston Station, a type of roof that was subsequently much used elsewhere. He then became a partner in Fox, Henderson \& Co., railway contractors and manufacturers of railway equipment and bridges. The firm built the Crystal Palace in London for the Great Exhibition of 1851: Fox did much of the detail design work personally and was subsequently knighted. It also built many station roofs, including that at Paddington. From 1857 Fox was in practice in London as a consulting engineer in partnership with his sons, Charles Douglas Fox and Francis Fox. Sir Charles Fox became an advocate of light and narrow-gauge railways, although he was opposed to break-of-gauge unless it was unavoidable. He was joint Engineer for the Indian Tramway Company, building the first narrow-gauge (3 ft 6 in. or 107 cm) railway in India, opened in 1865, and his firm was Consulting Engineer for the first railways in Queensland, Australia, built to the same gauge at the same period on recommendation of Government Engineer A.C.Fitzgibbon.

[br]

SUBJECT AREA: Photography, film and optics

[br]

[br]

[br]

Gabor became interested in physics at an early age. Called up for military service in 1918, he was soon released when the First World War came to an end. He then began a mechanical engineering course at the Budapest Technical University, but a further order to register for military service prompted him to flee in 1920 to Germany, where he completed his studies at Berlin Technical University. He was awarded a Diploma in Engineering in 1924 and a Doctorate in Electrical Engineering in 1927. He then went on to work in the physics laboratory of Siemens \& Halske. He returned to Hungary in 1933 and developed a new kind of fluorescent lamp called the plasma lamp. Failing to find a market for this device, Gabor made the decision to abandon his homeland and emigrate to England. There he joined British Thompson-Houston (BTH) in 1934 and married a colleague from the company in 1936. Gabor was also unsuccessful in his attempts to develop the plasma lamp in England, and by 1937 he had begun to work in the field of electron optics. His work was interrupted by the outbreak of war in 1939, although as he was not yet a British subject he was barred from making any significant contribution to the British war effort. It was only when the war was near its end that he was able to return to electron optics and begin the work that led to the invention of holography. The theory was developed during 1947 and 1948; Gabor went on to demonstrate that the theories worked, although it was not until the invention of the laser in 1960 that the full potential of his invention could be appreciated. He coined the term "hologram" from the Greek holos, meaning complete, and gram, meaning written. The three-dimensional images have since found many applications in various fields, including map making, medical imaging, computing, information technology, art and advertising. Gabor left BTH to become an associate professor at the Imperial College of Science and Technology in 1949, a position he held until his retirement in 1967. In 1971 he was awarded the Nobel Prize for Physics for his work on holography.

[br]

SUBJECT AREA: Photography, film and optics

[br]

[br]

[br]

Both from distinguished musical families, Godowsky and Leopold Damrosch Mannes met at Riverdale School in New York in 1916, and shared an interest in photography. They began experiments in methods of additive colour photography, gaining a patent for a three-colour projector. Godowsky went to the University of California to study chemistry, physics and mathematics, while working as a professional violinist; Mannes, a pianist, went to Harvard to study music and physics. They kept in touch, and after graduating they joined up in New York, working as musicians and experimenting in colour photography in their spare time.

Initially working in kitchens and bathrooms, they succeeded in creating a two-layer colour photographic plate, with emulsions separately sensitized to parts of the spectrum, and patented the process. This achievement was all the greater since they were unable to make the emulsions themselves and had to resort to buying commercial photographic plates so that they could scrape off the emulsions, remelt them and coat their experimental materials. In 1922 their work came to the attention of C.E.K. Mees, the leading photographic scientist and Director of the Eastman Kodak Research Laboratory in Rochester, New York. Mees arranged for plates to be coated to their specifications. With a grant from Kuhn, Loeb \& Co. they were able to rent laboratory space. Learning of Rudolf Fischer's early work on dye couplers, they worked to develop a new process incorporating them. Mees saw that their work, however promising, would not develop in an amateur laboratory, and in 1930 he invited them to join the Kodak Research Laboratory, where they arrived on 15 June 1931. Their new colleagues worked on ways of coating multi-layer film, while Mannes and Godowsky worked out a method of separately processing the individual layers in the exposed film. The result was Kodachrome film, the first of the modern integral tripack films, launched on 15 April 1935.

They remained with Eastman Kodak until December 1939; their work contributed to the later appearance of Ektachrome colour-reversal film and the Kodacolor and Eastman Color negative-positive colour processes. Mannes became the Director of his father's Music Academy in New York, remaining as such until his death in 1964. Godowsky returned to Westport, Connecticut, and continued to study mathematics at Columbia University. He carried out photographic research un his private laboratory up until the time of his death in 1983.

[br]

SUBJECT AREA: Electricity, Public utilities

[br]

[br]

[br]

Gramme trained as a carpenter and showed an early talent for working with machinery. Moving to Paris he found employment in the Alliance factory as a model maker. With a growing interest in electricity he left to become an instrument maker with Heinrich Daniel Rühmkorff. In 1870 he patented the uniformly wound ring-armature dynamo with which his name is associated. Together with Hippolyte Fontaine, in 1871 Gramme opened a factory to manufacture his dynamos. They rapidly became a commercial success for both arc lighting and electrochemical purposes, international publicity being achieved at exhibitions in Vienna, Paris and Philadelphia. It was the realization that a Gramme machine was capable of running as a motor, i.e. the reversibility of function, that illustrated the entire concept of power transmission by electricity. This was first publicly demonstrated in 1873. In 1874 Gramme reduced the size and increased the efficiency of his generators by relying completely on the principle of self-excitation. It was the first practical machine in which were combined the features of continuity of commutation, self-excitation, good lamination of the armature core and a reasonably good magnetic circuit. This dynamo, together with the self-regulating arc lamps then available, made possible the innumerable electric-lighting schemes that followed. These were of the greatest importance in demonstrating that electric lighting was a practical and economic means of illumination. Gramme also designed an alternator to operate Jablochkoff candles. For some years he took an active part in the operations of the Société Gramme and also experimented in his own workshop without collaboration, but made no further contribution to electrical technology.

[br]

SUBJECT AREA: Land transport, Railways and locomotives, Steam and internal combustion engines

[br]

[br]

[br]

Orphaned as a child, Hamilton went to work for Southern Pacific Railroad in his teens, and then worked for several other companies. In his spare time he learned mathematics and physics from a retired professor. In 1911 he joined the White Motor Company, makers of road motor vehicles in Denver, Colorado, where he had gone to recuperate from malaria. He remained there until 1922, apart from an eighteenth-month break for war service.

Upon his return from war service, Hamilton found White selling petrol-engined railbuses with mechanical transmission, based on road vehicles, to railways. He noted that they were not robust enough and that the success of petrol railcars with electric transmission, built by General Electric since 1906, was limited as they were complex to drive and maintain. In 1922 Hamilton formed, and became President of, the Electro- Motive Engineering Corporation (later Electro-Motive Corporation) to design and produce petrol-electric rail cars. Needing an engine larger than those used in road vehicles, yet lighter and faster than marine engines, he approached the Win ton Engine Company to develop a suitable engine; in addition, General Electric provided electric transmission with a simplified control system. Using these components, Hamilton arranged for his petrol-electric railcars to be built by the St Louis Car Company, with the first being completed in 1924. It was the beginning of a highly successful series. Fuel costs were lower than for steam trains and initial costs were kept down by using standardized vehicles instead of designing for individual railways. Maintenance costs were minimized because Electro-Motive kept stocks of spare parts and supplied replacement units when necessary. As more powerful, 800 hp (600 kW) railcars were produced, railways tended to use them to haul trailer vehicles, although that practice reduced the fuel saving. By the end of the decade Electro-Motive needed engines more powerful still and therefore had to use cheap fuel. Diesel engines of the period, such as those that Winton had made for some years, were too heavy in relation to their power, and too slow and sluggish for rail use. Their fuel-injection system was erratic and insufficiently robust and Hamilton concluded that a separate injector was needed for each cylinder.

In 1930 Electro-Motive Corporation and Winton were acquired by General Motors in pursuance of their aim to develop a diesel engine suitable for rail traction, with the use of unit fuel injectors; Hamilton retained his position as President. At this time, industrial depression had combined with road and air competition to undermine railway-passenger business, and Ralph Budd, President of the Chicago, Burlington \& Quincy Railroad, thought that traffic could be recovered by way of high-speed, luxury motor trains; hence the Pioneer Zephyr was built for the Burlington. This comprised a 600 hp (450 kW), lightweight, two-stroke, diesel engine developed by General Motors (model 201 A), with electric transmission, that powered a streamlined train of three articulated coaches. This train demonstrated its powers on 26 May 1934 by running non-stop from Denver to Chicago, a distance of 1,015 miles (1,635 km), in 13 hours and 6 minutes, when the fastest steam schedule was 26 hours. Hamilton and Budd were among those on board the train, and it ushered in an era of high-speed diesel trains in the USA. By then Hamilton, with General Motors backing, was planning to use the lightweight engine to power diesel-electric locomotives. Their layout was derived not from steam locomotives, but from the standard American boxcar. The power plant was mounted within the body and powered the bogies, and driver's cabs were at each end. Two 900 hp (670 kW) engines were mounted in a single car to become an 1,800 hp (l,340 kW) locomotive, which could be operated in multiple by a single driver to form a 3,600 hp (2,680 kW) locomotive. To keep costs down, standard locomotives could be mass-produced rather than needing individual designs for each railway, as with steam locomotives. Two units of this type were completed in 1935 and sent on trial throughout much of the USA. They were able to match steam locomotive performance, with considerable economies: fuel costs alone were halved and there was much less wear on the track. In the same year, Electro-Motive began manufacturing diesel-electrie locomotives at La Grange, Illinois, with design modifications: the driver was placed high up above a projecting nose, which improved visibility and provided protection in the event of collision on unguarded level crossings; six-wheeled bogies were introduced, to reduce axle loading and improve stability. The first production passenger locomotives emerged from La Grange in 1937, and by early 1939 seventy units were in service. Meanwhile, improved engines had been developed and were being made at La Grange, and late in 1939 a prototype, four-unit, 5,400 hp (4,000 kW) diesel-electric locomotive for freight trains was produced and sent out on test from coast to coast; production versions appeared late in 1940. After an interval from 1941 to 1943, when Electro-Motive produced diesel engines for military and naval use, locomotive production resumed in quantity in 1944, and within a few years diesel power replaced steam on most railways in the USA.

Hal Hamilton remained President of Electro-Motive Corporation until 1942, when it became a division of General Motors, of which he became Vice-President.

[br]

SUBJECT AREA: Mechanical, pneumatic and hydraulic engineering

[br]

[br]

[br]

John Jacob Holtzapffel was the second son of Charles Holtzapffel and was educated at King's College School, London, and at Cromwell House, Highgate. Following the death of his father in 1847 and of his elder brother, Charles, at the age of 10, he was called on at an early age to take part in the business of lathe-making and turning founded by his grandfather. He made many improvements to the lathe for ornamental turning, but he is now remembered chiefly for the continuation of his father's publication Turning and Mechanical Manipulation. J.J. Holtzapffel produced the fourth volume, on Plain Turning, in 1879, and the fifth, on Ornamental Turning, in 1884. In 1894 he revised and enlarged the third volume, but the intended sixth volume was never completed. J.J.Holtzapffel was admitted to the Turners' Company of London in 1862 and became Master in 1879. He was associated with the establishment of the Turners' Competition to encourage the art of turning and was one of the judges for many years. He was also an examiner for the City and Guilds of London Institute and the British Horological Institute. He was a member of the Society of Arts and a corresponding member of the Franklin Institute of Philadelphia. He was elected an Associate of the Institution of Civil Engineers in 1863 and became an Associate Member after reorganization of the classes of membership in 1878.

[br]

SUBJECT AREA: Weapons and armour

[br]

[br]

[br]

Hunt displayed talent as an inventor at an early age. While in his late teens he designed a machine for spinning flax, and after taking out a patent on it in 1826 he went to New York in order to set up a company to manufacture it. The company failed, however, and he was forced to go into business as an estate agent in order to make a living. Nevertheless, he remained undeterred and continued to invent a wide range of objects, including an iron fire alarm for fire stations and engines (1827) and the safety pin (1849). However, either many of his ideas were before their time or he failed to market them properly: for example, in 1834 he invented a sewing machine with lockstitch, but failed to patent it and it was left to others, such as Merritt Singer, to reap the rewards. He also conceived the name "fountain pen", but again more commercially minded people, Swan, Parker and Waterman, enjoyed the benefits. His paper collar, invented in 1854, only became popular after his death. Hunt is probably best remembered in the field of firearms. In 1849 he produced the first repeating rifle, which had a tubular magazine fixed under the barrel and fired special self-propelled or "rocket" balls, for which Hunt had taken out a patent the previous year. Although this weapon never entered general manufacture, the design principles incorporated in it were later reflected in the Springfield, Winchester, Henry and Volcanic rifles, which began to appear towards the end of the following decade.

[br]

SUBJECT AREA: Railways and locomotives

[br]

[br]

[br]

Early American railways used link-and-pin couplings, with consequent danger to life and limb of those who had to go between vehicles to couple and uncouple them. Many inventors tried to produce a coupling that would couple automatically and could be uncoupled from the trackside, and Janney was eventually successful in achieving this. He invented his device, which worked like the hooked fingers of two hands, in 1868, and after improvement it was adopted by the Pennsylvania Railroad in 1874. Janney formed the Janney Car Coupling Company, but it was not until 1888 that the Master Car Builders' Association made the Janney coupling standard on American railways. Automatic couplings were made compulsory in the USA by the Railroad Safety Appliance Act of 1893.

[br]

SUBJECT AREA: Paper and printing

[br]

[br]

[br]

The son of a master weaver, he originally wished to become an engineer, but while remaining in the parental home he had to follow his father's trade in the textile industry, becoming a master weaver himself in 1839 at Hainichen. He was a good observer and a keen model maker. It was at this stage, in the early 1840s, that he began experimenting with a new material for papermaking. Until then the raw material had been waste rag from the textile industry, but the ever-increasing demands of the mechanical printing presses, especially those producing newspapers, were beginning to outstrip supply. Keller tried using pine wood ground with a wet grindstone. The mass of fibres that resulted was then heated with water to form a thick brew which he then strained through a cloth. By this means Keller obtained a pulp that could be used for papermaking. He constructed a simple grinding machine that could disintegrate the wood without splinters; this was used to make paper in the Altchemnitzer paper mill, and the newspaper Frankenberger Intelligenz-und Wochenblatt was the first to be printed on wood-pulp paper. Keller could not secure state funds to promote his invention, so he approached an expert in papermaking, Heinrich Voelter, Technical Director of the Vereinigten Bautzener Papierfabrik. Voelter put up 700 thaler, and in August 1845 the state of Saxony granted a patent in both their names. In 1848 the first practical machine for grinding wood was produced, but four years later the patent expired. Unfortunately Keller could not afford the renewal fee, and it was Voelter who developed the process of wood-pulp papermaking under his own name, leaving Keller behind. Without this invention, the output of paper from the mills could not have kept pace with the demands of the printing industry, and the mass readership that these technological developments made possible could not have been served. It is no fault of Keller's that wood-pulp paper contains within itself the seeds of its own deterioration and ultimate destruction, presenting librarians of today with an intractable problem of preservation. Keller's part in this technical breakthrough is established in his "ideas" notebook covering the years 1841 and 1842, preserved in the museum at Hainichen.

[br]

SUBJECT AREA: Aerospace

[br]

[br]

[br]

His early life was spent in the Ukraine and he then studied at Tupolev's aeroplane institute in Moscow. In the mid-1930s, just before his thirtieth birthday, he joined the GIRD (Group Studying Rocket Propulsion) under Frederick Zander, a Latvian engineer, while earning a living designing aircraft in Tupolev's bureau. In 1934 he visited Konstantin Tsiolovsky. Soon after this, under the Soviet Armaments Minister, Mikhail N.Tukhachevsky, who was in favour of rocket weapons, financial support was available for the GIRD and Korolov was appointed General-Engineer (1-star) in the Soviet Army. In June 1937 the Armaments Minister and his whole staff were arrested under Stalin, but Korolov was saved by Tupolev and sent to a sharaska, or prison, near Moscow where he worked for four years on rocket-and jet-propelled aircraft, among other things. In 1946 he went with his superior, Valentin Glushko, to Germany where he watched the British test-firing of possibly three V-2s at Altenwaide, near Cuxhaven, in "Operation Backfire". They were not allowed within the wire enclosure. He remained in Germany to supervise the shipment of V-2 equipment and staff to Russia (it is possible that he underwent a second term of imprisonment from 1948), the Germans having been arrested in October 1946. He kept working in Russia until 1950 or the following year. He supervised the first Russian ballistic missile, R-1, in late 1947. Stalin died in 1953 and Korolov was rehabilitated, but freedom under Nikita Kruschev was almost as restrictive as imprisonment under Stalin. Kruschev would only refer to him as "the Chief Designer", never naming him, and would not let him go abroad or correspond with other rocket experts in the USA or Germany. Anything he published could only be under the name "Sergeyev". He continued to work on his R-7 without the approval that he sought for a satellite project. This was known as semyorka, or "old number seven". In January 1959 he added a booster stage to semyorka. He may have suffered confinement in the infamous Kolyma Gulag around this time. He designed all the Sputnik, Vostok and some of the Voshkod units and worked on the Proton space booster. In 1966 he underwent surgery performed by Dr Boris Petrovsky, then Soviet Minister of Health, for the removal, it is said, of tumours of the colon. In spite of the assistance of Dr Aleksandr Vishaevsky he bled to death on the operating table. The first moon landing (by robot) took place three weeks after his death and the first flight of the new Soyuz spacecraft a little later.

[br]

SUBJECT AREA: Electricity, Land transport, Railways and locomotives

[br]

[br]

[br]

Laithwaite's education at Kirkham Grammar School and Regent Street Polytechnic, London, was followed by service in the Royal Air Force. After entering Manchester University in 1946 and graduating in 1949, he joined the university staff and became Secretary to the Inaugural Conference of the Ferranti Mark I computer. In 1964 he moved to Imperial College of Science and Technology, London, and became Professor of Heavy Electrical Engineering. From 1967 to 1976 he also held the post of External Professor of Applied Electricity at the Royal Institution. Research into the use of linear induction motors as shuttle drives in weaving looms was followed by investigations into their application to conveyors in industrial processes and as high-speed propulsion units for railway vehicles. With considerable involvement in a tracked hovercraft project in the 1960s and 1970s, he proposed the concept of transverse flux and the magnetic river high-speed linear induction machine. Linear motors and electromagnetic levitation have been applied to high-speed propulsion in the United States, France and Japan.

Laithwaite has written five books and over one hundred papers on the subjects of linear motors and electromagnetic levitation. Two series of Christmas lectures were presented by him at the Royal Institution.

[br]

SUBJECT AREA: Textiles

[br]

[br]

[br]

It would seem that most of the stories about Lee's invention of the stocking frame cannot be verified by any contemporary evidence, and the first written accounts do not appear until the second half of the seventeenth century. The claim that he was Master of Arts from St John's College, Cambridge, was first made in 1607 but cannot be checked because the records have not survived. The date for the invention of the knitting machine as being 1589 was made at the same time, but again there is no supporting evidence. There is no evidence that Lee was Vicar of Calverton, nor that he was in Holy Orders at all. Likewise there is no evidence for the existence of the woman, whether she was girlfriend, fiancée or wife, who is said to have inspired the invention, and claims regarding the involvement of Queen Elizabeth I and her refusal to grant a patent because the stockings were wool and not silk are also without contemporary foundation. Yet the first known reference shows that Lee was the inventor of the knitting machine, for the partnership agreement between him and George Brooke dated 6 June 1600 states that "William Lee hath invented a very speedy manner of making works usually wrought by knitting needles as stockings, waistcoats and such like". This agreement was to last for twenty-two years, but terminated prematurely when Brooke was executed for high treason in 1603. Lee continued to try and exploit his invention, for in 1605 he described himself as "Master of Arts" when he petitioned the Court of Aldermen of the City of London as the first inventor of an engine to make silk stockings. In 1609 the Weavers' Company of London recorded Lee as "a weaver of silk stockings by engine". These petitions suggest that he was having difficulty in establishing his invention, which may be why in 1612 there is a record of him in Rouen, France, where he hoped to have better fortune. If he had been invited there by Henry IV, his hopes were dashed by the assassination of the king soon afterwards. He was to supply four knitting machines, and there is further evidence that he was in France in 1615, but it is thought that he died in that country soon afterwards.

The machine Lee invented was probably the most complex of its day, partly because the need to use silk meant that the needles were very fine. Henson (1970) in 1831 took five pages in his book to describe knitting on a stocking frame which had over 2,066 pieces. To knit a row of stitches took eleven separate stages, and great care and watchfulness were required to ensure that all the loops were equal and regular. This shows how complex the machines were and points to Lee's great achievement in actually making one. The basic principles of its operation remained unaltered throughout its extraordinarily long life, and a few still remained in use commercially in the early 1990s.

[br]