-
1 compartiment (d'un ensemble)
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Франко-русский словарь нормативно-технической терминологии > compartiment (d'un ensemble)
-
2 отсек (в НКУ)
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Русско-французский словарь нормативно-технической терминологии > отсек (в НКУ)
-
3 отсек (в НКУ)
- Raum, (Schott-)
- Fach, (Schott-)
- (Schott-)Raum
- (Schott-)Fach
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Русско-немецкий словарь нормативно-технической терминологии > отсек (в НКУ)
-
4 (Schott-)Fach
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Немецко-русский словарь нормативно-технической терминологии > (Schott-)Fach
-
5 (Schott-)Raum
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Немецко-русский словарь нормативно-технической терминологии > (Schott-)Raum
-
6 Fach, (Schott-)
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Немецко-русский словарь нормативно-технической терминологии > Fach, (Schott-)
-
7 Raum, (Schott-)
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Немецко-русский словарь нормативно-технической терминологии > Raum, (Schott-)
-
8 отсек (в НКУ)
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Русско-английский словарь нормативно-технической терминологии > отсек (в НКУ)
-
9 compartment (of an assembly)
отсек
Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
[ ГОСТ Р МЭК 61439.1-2013]
отсек
Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
[ ГОСТ Р 51732-2001]
отсек
Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
[Перевод Интент]EN
compartment (of an assembly)
a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
[IEV number 441-13-05]
compartment
the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
[ABB]FR
compartiment (d'un ensemble)
partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
[IEV number 441-13-05]Рис. ABB
Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
[Перевод Интент]
Оболочка шкафа с двумя отсекамиНедопустимые, нерекомендуемые
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
DE
- (Schott-)Fach
- (Schott-)Raum
- Fach, (Schott-)
- Raum, (Schott-)
FR
Англо-русский словарь нормативно-технической терминологии > compartment (of an assembly)
-
10 pocket
pocket ['pɒkɪt]1 noun∎ it's in your coat pocket c'est dans la poche de ton manteau;∎ take your hands out of your pockets! enlève tes mains de tes poches!;∎ I went through his pockets j'ai fouillé ou regardé dans ses poches;∎ he tried to pick her pocket il a essayé de lui faire les poches;∎ the maps are in the pocket of the car door les cartes sont dans (le compartiment de) la portière de la voiture;∎ to have sb in one's pockets avoir qn dans sa poche;∎ we had the deal in our pocket le marché était dans la poche;∎ they live in each other's pockets ils sont tout le temps ensemble;∎ to line one's pockets se remplir les poches, s'en mettre plein les poches;∎ figurative to put one's hand in one's pocket mettre la main au portefeuille;∎ he doesn't like putting his hand in his pocket il est du genre radin;∎ to be out of pocket en être de sa poche;∎ how much are you out of pocket? combien ça vous a coûté?∎ we have prices to suit all pockets nous avons des prix pour toutes les bourses∎ pockets of water poches fpl d'eau;∎ pocket of air trou m d'air(d) (small area → of resistance, rebellion, unemployment) poche f(e) (of snooker or pool table) blouse f(f) (bag → for hops, wool) sac m(diary, camera, revolver etc) de poche(a) (put in one's pocket) mettre dans sa poche, empocher;∎ I paid up and pocketed the change j'ai payé et j'ai mis la monnaie dans ma poche;∎ figurative to pocket one's pride mettre son amour-propre dans sa poche;∎ to pocket an insult encaisser une insulte sans rien dire∎ somebody must have pocketed the money quelqu'un a dû voler l'argent(c) (in snooker, pool) mettre dans la blouse∎ to pocket a bill = garder un projet de loi sous le coude pour l'empêcher d'être adopté►► pocket battleship cuirassé m de poche;∎ very familiar figurative humorous to play pocket billiards se caresser les boules à travers sa poche de pantalon;History pocket borough = circonscription électorale contrôlée par une personne ou une famille;pocket calculator calculatrice f de poche;pocket comb peigne m de poche;pocket computer ordinateur m de poche;pocket dictionary dictionnaire m de poche;Zoology pocket gopher gaufre m;pocket handkerchief mouchoir m de poche;British pocket money argent m de poche;Zoology pocket mouse souris f à poche;pocket notebook carnet m;American pocket pool billard m américain;∎ very familiar figurative humorous to play pocket pool se caresser les boules à travers sa poche de pantalon;pocket size (in bookbinding) format m de poche;American pocket veto = refus par le Président de signer une proposition de loi, pour l'empêcher d'être adoptée -
11 classe
classe [klαs]1. feminine nouna. ( = catégorie) class• classe moyenne inférieure/supérieure lower/upper middle classb. (Transport) class• compartiment de 1ère/2e classe 1st/2nd class compartment• voyager en 1ère classe to travel 1st class• classe affaires/économique business/economy classc. ( = valeur) class• elle a de la classe or elle a la classe (inf) she's got classd. ( = élèves) class ; ( = année d'études) year• les grandes/petites classes the senior/junior classes• partir en classe de neige ≈ to go on a school ski tripe. ( = cours) class• pendant/après la classe or les heures de classe during/after school• la classe se termine or les élèves sortent de classe à 16 heures school finishes at 4 o'clock• la classe de 1997 ( = contingent) the class of '972. invariable adjective* * *klas4) Sociologie, Politique class5) ( catégorie) class (de of)6) ( rang) gén class; Administration grade7) ( élégance) classc'est pas la classe! — (colloq) that's not very stylish!
billet de première/seconde classe — first-/second-class ou standard GB ticket
9) Arméefaire ses classes — lit to do one's basic training; fig to start out
un cinéaste qui a fait ses classes à la télévision — fig a film director who started out in television
•Phrasal Verbs:* * *klɒs nf1) (catégorie) class2) (= niveau) class3) MILITAIREun soldat de deuxième classe (armée de terre) — private, (armée de l'air) aircraftman Grande-Bretagne airman basic USA
faire ses classes MILITAIRE — to do one's training
4) (dans les transports en commun) class5) (= local d'enseignement) classroom6) (= leçon) classOn a classe à 10h. — We have a lesson at 10 o'clock.
7) (= niveau scolaire) year, grade USA8) (= élèves) classC'est la meilleure élève de la classe. — She's the best pupil in the class.
* * *classe nf1 Scol ( groupe d'élèves) class, form GB; ( niveau) year, form GB, grade US; une classe turbulente/studieuse a rowdy/hard-working class ou form GB; les classes primaires/de maternelle primary (school)/nursery classes; les classes du secondaire secondary school classes ou forms GB, ≈ junior high school and high school US; redoubler une classe to repeat a year; passer dans la classe supérieure to go up a year; être le premier/dernier de sa classe to be ou come top/bottom of the class;2 Scol ( cours) class, lesson; une classe de dessin a drawing class ou lesson; les élèves de Mme Dupont n'auront pas classe demain Mrs Dupont's class won't be having any lessons tomorrow; parler en classe to talk in class; faire la classe to teach; le soir après la classe in the evening after school;3 Scol ( salle) classroom; il s'est fait mettre à la porte de la classe he was sent out of the classroom;4 Sociol, Pol class; les classes sociales the social classes; la classe ouvrière/dirigeante the working/ruling class; les classes moyennes the middle classes; une société sans classes a classless society; classe politique political class ou community;5 ( catégorie) class (de of); la classe des mammifères the class of mammals; les artistes sont une classe à part artists are a class apart; classe grammaticale Ling grammatical class;6 gén class; ( rang) Admin grade; produits/champagne de première classe first-class products/champagne;7 ( élégance) class; avoir de la classe to have class; il a beaucoup de classe he has real class; ça, c'est la classe◑! now that's class ou style○!; c'est pas la classe◑! that's not very stylish!; elle est très classe◑ she's really classy○;8 Transp class; billet de première/seconde classe first-/second-class ou standard GB ticket; classe touristes/affaires economy ou tourist/business class; voyager en première classe to travel first class;9 Mil annual levy ou draft; la classe 1990 the 1990 levy ou draft; faire ses classes lit to do one's basic training; fig to start out; un cinéaste qui a fait ses classes à la télévision fig a film director who started out in television.classe d'adaptation special needs class; classe d'âge age group; classe de mer educational schooltrip to the seaside; classe de nature schooltrip to the countryside; classe de neige schooltrip in the mountains; classe de transition Scol remedial class; classe verte = classe de nature; les classes creuses age groups depleted by low birthrate; classes préparatoires (aux grandes écoles) preparatory classes for entrance to Grandes Écoles.ⓘ Classe de neige The classe de neige denotes the period of about a week which school classes spend in a mountain area when ski tuition is integrated with normal school work. The classe de nature or classe verte similarly refers to the week-long stay by school pupils in the countryside where nature study is integrated with normal school work.[klas] nom fémininA.[ÉDUCATION]1. [salle] classroom2. [groupe] classa. [être enseignant] to teachb. [donner un cours] to teach ou to take a classrefaire ou redoubler une classe to repeat a yearclasses préparatoiresschools specializing in preparing pupils to take Grandes Écoles entrance examsB.[DANS UNE HIÉRARCHIE]former une classe à part to be in a class ou league of one's ownles classes populaires ou laborieuses the working classesles classes moyennes/dirigeantes the middle/ruling classes4. TRANSPORTS classbillet de première/deuxième classe first-/second-class ticketavec classe smartly, with eleganceC.[MILITAIRE] annual contingent————————[klas] adjectif————————classes nom féminin pluriel————————en classe locution adverbialea. [pour la première fois] to start schoolb. [à la rentrée] to go back to school, to start school againAfter the baccalauréat very successful students may choose to attend the classes préparatoires, intensive courses organized in lycées. Students are completely immersed in their subject and do little else than prepare for the competitive grandes écoles entrance exams. If they do not succeed, two years of prépas are considered equivalent to a DEUG, and these students often continue at a university. -
12 sector
1) secteur; domaine; compartiment; filière2) Ind. secteur [ensemble d'industries oeuvrant dans un même domaine]English-French dictionary of law, politics, economics & finance > sector
-
13 appareillage recouvert de métal
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Франко-русский словарь нормативно-технической терминологии > appareillage recouvert de métal
-
14 appareillage sous enveloppe métallique
- комплектное устройство в металлической оболочке
- комплектное распределительное устройство в металлической оболочке
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
комплектное устройство в металлической оболочке
-EN
metal-enclosed switchgear and controlgear
switchgear and controlgear assemblies with an external metal enclosure intended to be earthed, and complete except for external connections
[IEC 62271-203, ed. 1.0 (2003-11)]FR
appareillage sous enveloppe métallique
appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l'exception des connexions extérieures
[IEC 62271-203, ed. 1.0 (2003-11)]Комплектные устройства в металлической оболочкеТематики
- НКУ (шкафы, пульты,...)
EN
FR
Франко-русский словарь нормативно-технической терминологии > appareillage sous enveloppe métallique
15 appareillage à compartiments (avec cloisons non métalliques)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Франко-русский словарь нормативно-технической терминологии > appareillage à compartiments (avec cloisons non métalliques)
16 pareillage d’armoire
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Франко-русский словарь нормативно-технической терминологии > pareillage d’armoire
17 комплектное распределительное устройство в металлической оболочке
- metalclad switchgear
- metalclad switch gear
- metal-enclosed switchgear
- metal clad switchgear
- metal clad switch gear
- MESG
- MCSG
- cubicle switchgear
- compartmented switchgear (with non-metallic partitions)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Русско-английский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке
18 комплектное распределительное устройство в металлической оболочке
- pareillage d’armoire
- appareillage sous enveloppe métallique
- appareillage recouvert de métal
- appareillage à compartiments (avec cloisons non métalliques)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Русско-французский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке
19 MESG
- комплектное распределительное устройство в металлической оболочке
- безопасный экспериментальный максимальный зазор
безопасный экспериментальный максимальный зазор
БЭМЗ
Максимальный зазор соединения шириной 25 мм, который предотвращает распространение взрыва при 10 испытаниях, проводимых в условиях, указанных в МЭК 60079-1-1 [7].
[ ГОСТ Р МЭК 60050-426-2006]
Тематики
Синонимы
EN
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Англо-русский словарь нормативно-технической терминологии > MESG
20 compartmented switchgear (with non-metallic partitions)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Англо-русский словарь нормативно-технической терминологии > compartmented switchgear (with non-metallic partitions)
Страницы- 1
- 2
См. также в других словарях:
compartiment — [ kɔ̃partimɑ̃ ] n. m. • 1546; it. compartimento, de compartire « partager » 1 ♦ Division pratiquée dans un espace pour loger des personnes ou des choses en les séparant. ⇒ case. Meuble formé d un ensemble de compartiments. ⇒ casier, classeur.… … Encyclopédie Universelle
COMPARTIMENT — n. m. Case, division. Un tiroir à plusieurs compartiments. Boîte à compartiments. Il se dit encore des Divisions d’une voiture de chemin de fer séparées par des cloisons. Monter dans le même compartiment. Compartiment réservé. Il se dit aussi… … Dictionnaire de l'Academie Francaise, 8eme edition (1935)
отсек (в НКУ) — отсек Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции [ГОСТ Р 51321.1 2000 (МЭК 60439 1 92)] [ГОСТ Р МЭК 61439.1 2013] отсек Часть внутреннего пространства ВРУ, предназначенная для… … Справочник технического переводчика
отсек (в НКУ) — отсек Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции [ГОСТ Р 51321.1 2000 (МЭК 60439 1 92)] [ГОСТ Р МЭК 61439.1 2013] отсек Часть внутреннего пространства ВРУ, предназначенная для… … Справочник технического переводчика
отсек (в НКУ) — отсек Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции [ГОСТ Р 51321.1 2000 (МЭК 60439 1 92)] [ГОСТ Р МЭК 61439.1 2013] отсек Часть внутреннего пространства ВРУ, предназначенная для… … Справочник технического переводчика
habitabilité — [ abitabilite ] n. f. • 1801; de habitable 1 ♦ Qualité de ce qui est habitable. 2 ♦ Qualité de ce qui offre plus ou moins de place pour des personnes. Habitabilité d une voiture; d un ascenseur. ● habitabilité nom féminin Fait pour un local, un… … Encyclopédie Universelle
Pirs (station spatiale internationale) — Compartiment d amarrage SO 1 Pirs Le compartiment d amarrage Pirs (russe : Пирс, signifiant « ponton »), également dénommé « Stikovochny Otsek 1 » ou SO 1 (russe : Стыковочный отсек … Wikipédia en Français
Station spatiale internationale — Pour les articles homonymes, voir ISS. Station spatiale internationale Assemblage … Wikipédia en Français
CELLULE — Tous les organismes sont constitués d’une ou plusieurs cellules, unités élémentaires dont la taille est de quelques dizaines de micromètres (rappelons que le micromètre ( 猪m) est le millième de millimètre (10 3 mm). Bien inférieure au pouvoir… … Encyclopédie Universelle
Soyouz (véhicule spatial) — Pour les articles homonymes, voir Soyouz. Vaisseau Soyouz Arrivée du Soyouz TMA 7 à la Station spatiale internationale … Wikipédia en Français
AUTOMOBILE - Technologie — Le mot «automobile», assemblant une racine grecque et une racine latine, a été créé à la fin du XIXe siècle pour désigner les nouvelles voitures sans chevaux. D’abord adjectif qualifiant tout véhicule se propulsant à l’aide d’un moteur (voiture,… … Encyclopédie Universelle
Перевод: со всех языков на все языки
со всех языков на все языки- Со всех языков на:
- Все языки
- Со всех языков на:
- Все языки
- Английский
- Немецкий
- Русский
- Французский