-
1 combination circuit
комбинированная цепь (из проводов разного диаметра или материала)
—
[Л.Г.Суменко. Англо-русский словарь по информационным технологиям. М.: ГП ЦНИИС, 2003.]Тематики
EN
Англо-русский словарь нормативно-технической терминологии > combination circuit
-
2 combination circuit
Железнодорожный термин: составная цепь -
3 combination circuit
-
4 combination starter
комбинированный пускатель
Комбинация пускателя, коммутационного аппарата с наружным органом ручного управления и аппарата защиты от коротких замыканий, смонтированных и соединенных в предусмотренной для этого оболочке. Функции коммутационного аппарата и аппарата защиты от коротких замыканий могут выполнять комбинация с плавкими предохранителями, выключатель с плавкими предохранителями или автоматический выключатель, пригодный или непригодный для разъединения.
1 — автоматический выключатель; 2 — контактор; 3 — реле перегрузки; 4 — выключатель цепи управления; 5 — автоматический выключатель с одним только магнитным расцепителем; 6 — выключатель-разъединитель; 7 — плавкий предохранитель; 8 — разъединитель с плавким предохранителем; 9— автоматический выключатель с расцепителем перегрузки, соответствующим настоящему стандарту
1 Предусмотренная оболочка — это специально спроектированная и рассчитанная для данного применения оболочка, в которой проводят все испытания.
2 Коммутационный аппарат с ручным управлением и устройство защиты от коротких замыканий могут представлять собой единый аппарат и оснащаться дополнительно защитой от перегрузок.
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
protected starter
equipment consisting of a starter, a manually-operated switching device and a short-circuit protective device, rated as a unit by the manufacturer
NOTE 1 The protected starter may or may not be enclosed.
NOTE 2 In the context of this standard, the term “manufacturer“ means any person, company or organization with ultimate responsibility as follows:
– to verify compliance with the appropriate standard;
– to provide the product information according to Clause 6.
NOTE 3 The manually operated switching device and the short-circuit protective device may be just one device and may also incorporate the starter overload protection.
[IEC 60947-4-1, ed. 3.0 (2009-09)]
combination starter
equipment consisting of a protected starter incorporating an isolating function
NOTE Also called "combination motor controller".
[IEC 60947-4-1, ed. 3.0 (2009-09)]FR
démarreur protégé
matériel comprenant un démarreur, un appareil de connexion à commande manuelle et un dispositif de protection contre les courts-circuits, caractérisé comme une unité par le fabricant
NOTE 1 Le démarreur protégé peut ou non être sous enveloppe.
NOTE 2 Dans le contexte de la présente norme, le terme «fabricant» signifie toute personne, entreprise ou organisation ayant la responsabilité ultime:
– de vérifier la conformité avec la norme appropriée;
– de fournir l’information sur le matériel selon l’Article 6.
NOTE 3 L'appareil de connexion à commande manuelle et le dispositif de protection contre les courts-circuits peuvent être seulement un appareil et peuvent également incorporer la protection contre les surcharges du démarreur.
[IEC 60947-4-1, ed. 3.0 (2009-09)]
combiné de démarrage
matériel comprenant un démarreur protégé incorporant une fonction de sectionnement
NOTE Également appelé «combiné contrôleur de moteur».
[IEC 60947-4-1, ed. 3.0 (2009-09)]Параллельные тексты EN-RU
Combination starter
Equipment consisting of a starter and a short-circuit protective device, mounted and wired in a dedicated enclosure. The switching and short-circuit protective devices may be a fuse combination unit, a switch with fuses or a circuit-breaker with or without an isolating function.
[ABB]Комбинированный пускатель
Комбинация пускателя и аппарата защиты от коротких замыканий, смонтированных и соединенных в предусмотренной для этого оболочке. Функции коммутационного аппарата и аппарата защиты от коротких замыканий могут выполнять комбинация с плавкими предохранителями, выключатель с плавкими предохранителями или автоматический выключатель, пригодный или непригодный для разъединения.
[Перевод Интент]Тематики
EN
FR
Англо-русский словарь нормативно-технической терминологии > combination starter
-
5 circuit
1) схема; цепь; контур2) эл. сеть4) шлейф ( в телефонии)•to track circuits — сопрягать контуры-
in-line hydraulic circuit
-
tee-test hydraulic circuit
-
absorption circuit
-
ac circuit
-
active circuit
-
adapter circuit
-
adder circuit
-
addressing circuit
-
aerial circuit
-
aerodrome circuit
-
aerodrome taxi circuit
-
aerodrome traffic circuit
-
aeromagnetic circuit
-
alarm circuit
-
alive circuit
-
amplifying circuit
-
analogous circuit
-
analog circuit
-
ancillary circuit
-
AND circuit
-
AND-to-OR circuit
-
AND-OR circuit
-
anticoincidence circuit
-
antihunt circuit
-
antireciprocal circuit
-
antiresonance circuit
-
antiresonant circuit
-
aperiodic circuit
-
approach circuit
-
astable circuit
-
autodyne circuit
-
automatic frequency control circuit
-
automatic reciprocation pneumatic circuit
-
auxiliary circuit
-
auxiliary coolant circuit
-
averaging circuit
-
back-to-back circuit
-
balanced circuit
-
balancing circuit
-
bias and erase circuit
-
bias circuit
-
bidirectional hydraulic motor circuit
-
bipolar circuit
-
bistable circuit
-
black-level restoring circuit
-
blanking circuit
-
blasting circuit
-
blocking circuit
-
booster hydraulic circuit
-
bound circuit
-
boxcar circuit
-
brake retraction circuit
-
branched circuit
-
branch circuit
-
breadboard circuit
-
break circuit
-
bridge circuit
-
bridged circuit
-
broken circuit
-
bubble circuit
-
bucket-brigade circuit
-
buffer circuit
-
burst-gating circuit
-
calibrating circuit
-
call circuit
-
carrier recovery circuit
-
cascode circuit
-
cavity circuit
-
charge circuit
-
charge-coupied device circuit
-
charging circuit
-
checkout circuit
-
cholesteric circuit
-
chopping circuit
-
chromatic circuit
-
circulating lubrication circuit
-
clamp circuit
-
cleaning circuit
-
clearing circuit
-
clipping circuit
-
clocked circuit
-
closed circuit
-
close circuit
-
closed loop circuit
-
closed loop hydraulic motor circuit
-
coaxial circuit
-
code track circuit
-
coincidence circuit
-
color-killer circuit
-
color-processing circuit
-
combination air-oil circuit
-
combinational circuit
-
common-base circuit
-
common-collector circuit
-
common-drain circuit
-
common-emitter circuit
-
common-gate circuit
-
common-source circuit
-
communication circuit
-
comparator circuit
-
compensating circuit
-
complementary circuit
-
completed circuit
-
composite circuit
-
condensate circuit
-
control circuit
-
convergence circuit
-
coolant circuit
-
cooling short circuit
-
cord circuit
-
correcting circuit
-
counter circuit
-
coupled circuits
-
cross rectifier circuit
-
crushing circuit
-
current circuit
-
current-feedback circuit
-
current-limiting circuit
-
current-limit circuit
-
damping circuit
-
Danington circuit
-
dc circuit
-
dead circuit
-
decision making circuit
-
decision circuit
-
decoding circuit
-
decoupling circuit
-
dedicated circuit
-
de-emphasis circuit
-
degaussing circuit
-
degenerative circuit
-
delay circuit
-
delta circuit
-
derived circuit
-
detecting circuit
-
detuned circuit
-
dial toll circuit
-
dial-up circuit
-
differentiating circuit
-
digital circuit
-
diplex circuit
-
direct circuit
-
direct speech circuit
-
discharge circuit
-
distributed-element circuit
-
dividing circuit
-
double-rail track circuit
-
drive circuit
-
driver circuit
-
dual circuit
-
dual-relief braking hydraulic motor circuit
-
duplex circuit
-
dynamic braking circuit
-
earthed circuit
-
earth circuit
-
edge-activated circuit
-
electric circuit
-
electrical safety circuit
-
electrolysis circuit
-
electronic circuit
-
emphasis circuit
-
enabling circuit
-
energized circuit
-
engineering circuit
-
enhancement circuit
-
equilization circuit
-
equivalent circuit
-
error correcting circuit
-
evaporating circuit
-
exciting circuit
-
exclusive OR circuit
-
exposure control circuit
-
exposure measuring circuit
-
external circuit
-
external load circuit
-
fallback circuit
-
feed circuit
-
feed motor circuit
-
feedback circuit
-
feedrate override circuit
-
filament circuit
-
filter hydraulic circuit
-
firing circuit
-
flip-flop circuit
-
flotation circuit
-
flow circuit
-
fluid circuit
-
forked circuit
-
four-terminal circuit
-
four-wire circuit
-
frame-scanning circuit
-
free-running circuit
-
frequency determining circuit
-
frequency-changing circuit
-
full-wave circuit
-
gain circuit
-
gas circuit
-
gate circuit
-
grinding circuit
-
ground short circuit
-
grounded circuit
-
ground circuit
-
half-duplex circuit
-
half-phantom circuit
-
half-wave circuit
-
half-wave track circuit
-
heat transport main circuit
-
heater circuit
-
holding circuit
-
horizontal scanning circuit
-
hotline circuit
-
hybrid-type circuit
-
hybrid circuit
-
hydraulic circuit
-
hydraulic servo circuit
-
identification circuit
-
idler circuit
-
ignition circuit
-
ignition primary circuit
-
ignition secondary circuit
-
impulse circuit
-
impulsing circuit
-
incoming track circuit
-
inductive circuit
-
inhibit circuit
-
input circuit
-
insulated circuit
-
integrated circuit
-
integrating circuit
-
intentional short circuit
-
interface circuit
-
interlocking circuit
-
interlock circuit
-
international television circuit
-
inverter circuit
-
invert circuit
-
iron circuit
-
jointless pulse track circuit
-
junction circuit
-
keep-alive circuit
-
ladder circuit
-
lagging circuit
-
latching circuit
-
LC circuit
-
leakage circuit
-
leak circuit
-
leased circuit
-
level circuit
-
linear circuit
-
linearizing circuit
-
line-scanning circuit
-
line-to-ground short circuit
-
live circuit
-
load circuit
-
locking circuit
-
locking hydraulic circuit
-
locking track circuit
-
logic circuit
-
long-distance transmission circuit
-
loop circuit
-
low-loss circuit
-
lumped-element lumped-parameter circuit
-
lumped lumped-parameter circuit
-
lumped-element circuit
-
lumped circuit
-
magnetic circuit
-
magnetic-core circuit
-
main circuit
-
majority circuit
-
make circuit
-
matching circuit
-
match circuit
-
matrix circuit
-
maximum power control circuit
-
measuring circuit
-
memory circuit
-
mesh circuit
-
metallic circuit
-
meter-current circuit
-
metering circuit
-
meter-voltage circuit
-
microelectronic circuit
-
microwave circuit
-
molecular circuit
-
monitoring circuit
-
monostable circuit
-
motor control circuit
-
multidrop circuit
-
multiplication circuit
-
multipoint circuit
-
multistable circuit
-
multistage circuit
-
muting circuit
-
NAND circuit
-
narrowband circuit
-
network circuit
-
neutral track circuit
-
neutralizing circuit
-
noise-balancing circuit
-
noninductive circuit
-
NOR circuit
-
NOT circuit
-
NOT-AND circuit
-
NOT-OR circuit
-
offset compensating circuit
-
one-pole circuit
-
one-rail track circuit
-
one-wire circuit
-
open circuit
-
open loop circuit
-
open-wire circuit
-
OR circuit
-
order wire circuit
-
OR-ELSE circuit
-
oscillating circuit
-
oscillation circuit
-
oscillatory circuit
-
output circuit
-
overflux circuit
-
overhead circuit
-
packaged circuit
-
paging circuit
-
parallel circuit
-
parallel-resonant circuit
-
parallel-series circuit
-
passive circuit
-
peak white-limiting circuit
-
peaking circuit
-
phantom circuit
-
phase switching circuit
-
phase-comparison circuit
-
phase-compensating circuit
-
phase-equalizing circuit
-
phase-inverting circuit
-
phase-sensitive track circuit
-
phase-shifting circuit
-
phase-shift circuit
-
pilot circuit
-
pneumatic circuit
-
points control circuit
-
points track circuit
-
point-to-point circuit
-
polarity circuit
-
polarized track circuit
-
polling circuit
-
polyphase circuit
-
potential circuit
-
power circuit
-
precharge circuit
-
precision timing circuit
-
pressure control hydraulic circuit
-
primary circuit
-
primary coolant circuit
-
printed circuit
-
protection circuit
-
pulse circuit
-
pulse-shaping circuit
-
pump unloading hydraulic circuit
-
pumping circuit
-
pump circuit
-
push-pull circuit
-
push-to-type circuit
-
quadruplex circuit
-
radiation-hardened circuit
-
radio communication circuit
-
radio circuit
-
RC circuit
-
reaction circuit
-
reaction track circuit
-
reactive circuit
-
reclosing circuit
-
rectification circuit
-
reference circuit
-
reflex circuit
-
regenerative circuit
-
register mark recognition circuit
-
regrinding circuit
-
regulating circuit
-
rejector circuit
-
relay circuit
-
relay contact switching circuit
-
relay contact circuit
-
remote-ring circuit
-
replenishing hydraulic motor circuit
-
reset circuit
-
resonance circuit
-
retaining circuit
-
return circuit
-
ring circuit
-
ringing circuit
-
route locking circuit
-
sample circuit
-
sample-and-hold circuit
-
sampler circuit
-
scaling circuit
-
scanning circuit
-
schematic circuit
-
screening circuit
-
secondary circuit
-
secondary coolant circuit
-
selecting circuit
-
selection circuit
-
self-bias circuit
-
self-checking circuit
-
self-holding circuit
-
self-test circuit
-
semiconductor circuit
-
separation circuit
-
sequencing circuit
-
series circuit
-
series-resonant circuit
-
series-tuned circuit
-
service circuit
-
shell circuit
-
shifting circuit
-
short circuit
-
shunt circuit
-
shutoff circuit
-
signal circuit
-
signaling circuit
-
simplex circuit
-
single-phase circuit
-
single-rail track circuit
-
single-wire circuit
-
slow-wave circuit
-
smoothing circuit
-
sneak circuit
-
solid-state circuit
-
solid circuit
-
spare circuit
-
speaker circuit
-
speed regulating circuit
-
squelch circuit
-
standby circuit
-
star-connected circuit
-
starting circuit
-
station conventional track circuit
-
steady energy track circuit
-
stripline circuit
-
strip circuit
-
subcarrier recovery circuit
-
subtransmission circuit
-
superconducting circuit
-
supply circuit
-
suppression circuit
-
sustained short circuit
-
sweep circuit
-
switched circuit
-
switching circuit
-
symbolic circuit
-
symmetrical circuit
-
symmetric circuit
-
synchronization circuit
-
synchronizing hydraulic circuit
-
synchronous circuit
-
table circuit
-
tank circuit
-
tap circuit
-
tapped circuit
-
T-circuit
-
telegraph circuit
-
telephone circuit
-
temperature stabilized circuit
-
tension sensing circuit
-
terminal circuit
-
test circuit
-
thickening circuit
-
three-phase circuit
-
threshold circuit
-
throttled circuit
-
through circuit
-
tilt kickout hydraulic circuit
-
time-base circuit
-
time-delay circuit
-
timer circuit
-
time-slot assigner circuit
-
timing circuit
-
toll circuit
-
tool selector circuit
-
toroidal magnetic circuit
-
touch sensing circuit
-
track circuit
-
train dispatching circuit
-
transient short circuit
-
transmission hydraulic circuit
-
trap circuit
-
tree circuit
-
triggering circuit
-
trigger circuit
-
trouble-detecting circuit
-
trunk circuit
-
tube circuit
-
tuned circuit
-
two-port circuit
-
two-state circuit
-
two-terminal circuit
-
two-wire circuit
-
unbalanced circuit
-
unidirectional hydraulic motor circuit
-
unipolar circuit
-
vertical-scanning circuit
-
virtual circuit
-
voltage-feedback circuit
-
warning circuit
-
white clip circuit
-
wideband circuit
-
wire circuit
-
wired AND circuit
-
wired circuit
-
wired OR circuit
-
wye-connected circuit
-
wye circuit
-
zero-lose circuit -
6 circuit magnétique, m
магнитная цепь
-
[IEV number 151-14-01]
магнитная цепь
Совокупность устройств, содержащих ферромагнитные тела, электромагнитные процессы в которых могут быть описаны с помощью понятий магнитодвижущей силы, магнитного потока и разности магнитных потенциалов.
[ ГОСТ Р 52002-2003]EN
magnetic circuit
combination of media through which a magnetic flux is channelled in a given region
NOTE – In IEC 60050-131, the term "magnetic circuit" has another meaning relative to circuit theory.
[IEV number 151-14-01]FR
circuit magnétique, m
ensemble de milieux qui canalise un flux magnétique dans une région déterminée
NOTE – Dans la CEI 60050-131, le terme "circuit magnétique" a un sens approprié à la théorie des circuits.
[IEV number 151-14-01]
EN
DE
FR
- circuit magnétique, m
Франко-русский словарь нормативно-технической терминологии > circuit magnétique, m
-
7 combination air-oil circuit
комбинированный гидропневмоприводБольшой англо-русский и русско-английский словарь > combination air-oil circuit
-
8 combination air-oil circuit
Англо-русский словарь технических терминов > combination air-oil circuit
-
9 combination air-oil circuit
Техника: комбинированный гидропневмоприводУниверсальный англо-русский словарь > combination air-oil circuit
-
10 impédance du circuit d'entrée
входное полное сопротивление
-
[IEV number 312-06-18]EN
input impedance
impedance of the input circuit measured between the input terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the input circuit is such that the instantaneous value of the current flowing into the input terminals is a non-linear function of the instantaneous value of the input voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual input circuit, is sometimes called the "equivalent input impedance".
[IEV number 312-06-18]FR
impédance du circuit d'entrée
impédance du circuit d'entrée entre les bornes d'entrée dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit d'entrée est tel que la valeur instantanée du courant traversant les bornes d'entrée est une fonction non linéaire de la valeur instantanée de la tension d'entrée dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit d'entrée réel, est parfois appelée "impédance équivalente d'entrée".
[IEV number 312-06-18]Тематики
- измерение электр. величин в целом
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > impédance du circuit d'entrée
-
11 impédance du circuit de sortie
выходное полное сопротивление
-
[IEV number 312-06-19]EN
output impedance
impedance of the output circuit measured between the output terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the output circuit is such that the instantaneous value of the current flowing into the output terminals is a non-linear function of the instantaneous value of the output voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual output circuit, is sometimes called the "equivalent output impedance".
[IEV number 312-06-19]FR
impédance du circuit de sortie
impédance du circuit de sortie entre les bornes de sortie dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit de sortie est tel que la valeur instantanée du courant traversant les bornes de sortie est une fonction non linéaire de la valeur instantanée de la tension de sortie dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit de sortie réel, est parfois appelée "impédance équivalente de sortie".
[IEV number 312-06-19]Тематики
- измерение электр. величин в целом
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > impédance du circuit de sortie
-
12 magnetic circuit
магнитная цепь
-
[IEV number 151-14-01]
магнитная цепь
Совокупность устройств, содержащих ферромагнитные тела, электромагнитные процессы в которых могут быть описаны с помощью понятий магнитодвижущей силы, магнитного потока и разности магнитных потенциалов.
[ ГОСТ Р 52002-2003]EN
magnetic circuit
combination of media through which a magnetic flux is channelled in a given region
NOTE – In IEC 60050-131, the term "magnetic circuit" has another meaning relative to circuit theory.
[IEV number 151-14-01]FR
circuit magnétique, m
ensemble de milieux qui canalise un flux magnétique dans une région déterminée
NOTE – Dans la CEI 60050-131, le terme "circuit magnétique" a un sens approprié à la théorie des circuits.
[IEV number 151-14-01]
EN
DE
FR
- circuit magnétique, m
магнитопровод
Устройство из ферромагнитных тел, направляющее магнитный поток намагничивающего устройства дефектоскопа по заданному пути.
[Система неразрушающего контроля. Виды (методы) и технология неразрушающего контроля. Термины и определения (справочное пособие). Москва 2003 г.]Тематики
- виды (методы) и технология неразр. контроля
EN
Англо-русский словарь нормативно-технической терминологии > magnetic circuit
-
13 integrally fused circuit-breaker
- выключатель со встроенными плавкими предохранителями
- автоматический выключатель со встроенными плавкими предохранителями
автоматический выключатель со встроенными плавкими предохранителями
Аппарат, состоящий из выключателя и плавких предохранителей, по одному предохранителю в каждом полюсе выключателя, предназначенному для присоединения к фазному проводнику.
[ ГОСТ 50030.2-99]EN
integrally fused circuit-breaker
a combination, in a single device, of a circuit-breaker and fuses, one fuse being placed in series with each pole of the circuit-breaker intended to be connected to a phase conductor
[IEV number 441-14-22]FR
disjoncteur à fusibles incorporés
combinaison en un seul appareil d'un disjoncteur et de fusibles, un fusible étant placé en série avec chaque pôle du disjoncteur destiné à être relié à un conducteur de phase
[IEV number 441-14-22]Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
Классификация
>>>Обобщающие термины
EN
DE
FR
2.2 выключатель со встроенными плавкими предохранителями (integrally fused circuit-breaker): Комбинация в одном аппарате выключателя и предохранителей, в которой каждый предохранитель установлен последовательно с полюсом выключателя, предназначенным для соединения с фазным проводом.
[МЭС 441-14-22] [1]
Источник: ГОСТ Р 50030.2-2010: Аппаратура распределения и управления низковольтная. Часть 2. Автоматические выключатели оригинал документа
Англо-русский словарь нормативно-технической терминологии > integrally fused circuit-breaker
-
14 integrally fused circuit breaker
автоматический выключатель со встроенными плавкими предохранителями
Аппарат, состоящий из выключателя и плавких предохранителей, по одному предохранителю в каждом полюсе выключателя, предназначенному для присоединения к фазному проводнику.
[ ГОСТ 50030.2-99]EN
integrally fused circuit-breaker
a combination, in a single device, of a circuit-breaker and fuses, one fuse being placed in series with each pole of the circuit-breaker intended to be connected to a phase conductor
[IEV number 441-14-22]FR
disjoncteur à fusibles incorporés
combinaison en un seul appareil d'un disjoncteur et de fusibles, un fusible étant placé en série avec chaque pôle du disjoncteur destiné à être relié à un conducteur de phase
[IEV number 441-14-22]Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
Классификация
>>>Обобщающие термины
EN
DE
FR
Англо-русский словарь нормативно-технической терминологии > integrally fused circuit breaker
-
15 комбинированный гидропневмопривод
Англо-русский словарь технических терминов > комбинированный гидропневмопривод
-
16 démarreur protégé
защищенный пускатель
Комбинация пускателя, коммутационного аппарата с ручным управлением и аппарата защиты от коротких замыканий в оболочке или без нее, смонтированных и соединенных по инструкции изготовителя.
Примечание. Коммутационный аппарат с ручным управлением и аппарат защиты от коротких замыканий могут представлять собой единый аппарат и оснащаться дополнительно защитой от перегрузок.
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
protected starter
equipment consisting of a starter, a manually-operated switching device and a short-circuit protective device, rated as a unit by the manufacturer
NOTE 1 - The protected starter may or may not be enclosed.
NOTE 2 - In the context of this standard, the term “manufacturer“ means any person, company or organization with ultimate responsibility as follows:
– to verify compliance with the appropriate standard;
– to provide the product information according to Clause 6.
NOTE 3 - The manually operated switching device and the short-circuit protective device may be just one device and may also incorporate the starter overload protection.
[IEC 60947-4-1, ed. 3.0 (2009-09)]FR
démarreur protégé
matériel comprenant un démarreur, un appareil de connexion à commande manuelle et un dispositif de protection contre les courts-circuits, caractérisé comme une unité par le fabricant
NOTE 1 - Le démarreur protégé peut ou non être sous enveloppe.
NOTE 2 - Dans le contexte de la présente norme, le terme «fabricant» signifie toute personne, entreprise ou organisation ayant la responsabilité ultime:
– de vérifier la conformité avec la norme appropriée;
– de fournir l’information sur le matériel selon l’Article 6.
NOTE 3 - L'appareil de connexion à commande manuelle et le dispositif de protection contre les courts-circuits peuvent être seulement un appareil et peuvent également incorporer la protection contre les surcharges du démarreur.
[IEC 60947-4-1, ed. 3.0 (2009-09)]Тематики
- аппарат, изделие, устройство...
- контакторы и пускатели
EN
FR
комбинированный пускатель
Комбинация пускателя, коммутационного аппарата с наружным органом ручного управления и аппарата защиты от коротких замыканий, смонтированных и соединенных в предусмотренной для этого оболочке. Функции коммутационного аппарата и аппарата защиты от коротких замыканий могут выполнять комбинация с плавкими предохранителями, выключатель с плавкими предохранителями или автоматический выключатель, пригодный или непригодный для разъединения.
1 — автоматический выключатель; 2 — контактор; 3 — реле перегрузки; 4 — выключатель цепи управления; 5 — автоматический выключатель с одним только магнитным расцепителем; 6 — выключатель-разъединитель; 7 — плавкий предохранитель; 8 — разъединитель с плавким предохранителем; 9— автоматический выключатель с расцепителем перегрузки, соответствующим настоящему стандарту
1 Предусмотренная оболочка — это специально спроектированная и рассчитанная для данного применения оболочка, в которой проводят все испытания.
2 Коммутационный аппарат с ручным управлением и устройство защиты от коротких замыканий могут представлять собой единый аппарат и оснащаться дополнительно защитой от перегрузок.
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
protected starter
equipment consisting of a starter, a manually-operated switching device and a short-circuit protective device, rated as a unit by the manufacturer
NOTE 1 The protected starter may or may not be enclosed.
NOTE 2 In the context of this standard, the term “manufacturer“ means any person, company or organization with ultimate responsibility as follows:
– to verify compliance with the appropriate standard;
– to provide the product information according to Clause 6.
NOTE 3 The manually operated switching device and the short-circuit protective device may be just one device and may also incorporate the starter overload protection.
[IEC 60947-4-1, ed. 3.0 (2009-09)]
combination starter
equipment consisting of a protected starter incorporating an isolating function
NOTE Also called "combination motor controller".
[IEC 60947-4-1, ed. 3.0 (2009-09)]FR
démarreur protégé
matériel comprenant un démarreur, un appareil de connexion à commande manuelle et un dispositif de protection contre les courts-circuits, caractérisé comme une unité par le fabricant
NOTE 1 Le démarreur protégé peut ou non être sous enveloppe.
NOTE 2 Dans le contexte de la présente norme, le terme «fabricant» signifie toute personne, entreprise ou organisation ayant la responsabilité ultime:
– de vérifier la conformité avec la norme appropriée;
– de fournir l’information sur le matériel selon l’Article 6.
NOTE 3 L'appareil de connexion à commande manuelle et le dispositif de protection contre les courts-circuits peuvent être seulement un appareil et peuvent également incorporer la protection contre les surcharges du démarreur.
[IEC 60947-4-1, ed. 3.0 (2009-09)]
combiné de démarrage
matériel comprenant un démarreur protégé incorporant une fonction de sectionnement
NOTE Également appelé «combiné contrôleur de moteur».
[IEC 60947-4-1, ed. 3.0 (2009-09)]Параллельные тексты EN-RU
Combination starter
Equipment consisting of a starter and a short-circuit protective device, mounted and wired in a dedicated enclosure. The switching and short-circuit protective devices may be a fuse combination unit, a switch with fuses or a circuit-breaker with or without an isolating function.
[ABB]Комбинированный пускатель
Комбинация пускателя и аппарата защиты от коротких замыканий, смонтированных и соединенных в предусмотренной для этого оболочке. Функции коммутационного аппарата и аппарата защиты от коротких замыканий могут выполнять комбинация с плавкими предохранителями, выключатель с плавкими предохранителями или автоматический выключатель, пригодный или непригодный для разъединения.
[Перевод Интент]Тематики
EN
FR
Франко-русский словарь нормативно-технической терминологии > démarreur protégé
-
17 protected starter
защищенный пускатель
Комбинация пускателя, коммутационного аппарата с ручным управлением и аппарата защиты от коротких замыканий в оболочке или без нее, смонтированных и соединенных по инструкции изготовителя.
Примечание. Коммутационный аппарат с ручным управлением и аппарат защиты от коротких замыканий могут представлять собой единый аппарат и оснащаться дополнительно защитой от перегрузок.
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
protected starter
equipment consisting of a starter, a manually-operated switching device and a short-circuit protective device, rated as a unit by the manufacturer
NOTE 1 - The protected starter may or may not be enclosed.
NOTE 2 - In the context of this standard, the term “manufacturer“ means any person, company or organization with ultimate responsibility as follows:
– to verify compliance with the appropriate standard;
– to provide the product information according to Clause 6.
NOTE 3 - The manually operated switching device and the short-circuit protective device may be just one device and may also incorporate the starter overload protection.
[IEC 60947-4-1, ed. 3.0 (2009-09)]FR
démarreur protégé
matériel comprenant un démarreur, un appareil de connexion à commande manuelle et un dispositif de protection contre les courts-circuits, caractérisé comme une unité par le fabricant
NOTE 1 - Le démarreur protégé peut ou non être sous enveloppe.
NOTE 2 - Dans le contexte de la présente norme, le terme «fabricant» signifie toute personne, entreprise ou organisation ayant la responsabilité ultime:
– de vérifier la conformité avec la norme appropriée;
– de fournir l’information sur le matériel selon l’Article 6.
NOTE 3 - L'appareil de connexion à commande manuelle et le dispositif de protection contre les courts-circuits peuvent être seulement un appareil et peuvent également incorporer la protection contre les surcharges du démarreur.
[IEC 60947-4-1, ed. 3.0 (2009-09)]Тематики
- аппарат, изделие, устройство...
- контакторы и пускатели
EN
FR
комбинированный пускатель
Комбинация пускателя, коммутационного аппарата с наружным органом ручного управления и аппарата защиты от коротких замыканий, смонтированных и соединенных в предусмотренной для этого оболочке. Функции коммутационного аппарата и аппарата защиты от коротких замыканий могут выполнять комбинация с плавкими предохранителями, выключатель с плавкими предохранителями или автоматический выключатель, пригодный или непригодный для разъединения.
1 — автоматический выключатель; 2 — контактор; 3 — реле перегрузки; 4 — выключатель цепи управления; 5 — автоматический выключатель с одним только магнитным расцепителем; 6 — выключатель-разъединитель; 7 — плавкий предохранитель; 8 — разъединитель с плавким предохранителем; 9— автоматический выключатель с расцепителем перегрузки, соответствующим настоящему стандарту
1 Предусмотренная оболочка — это специально спроектированная и рассчитанная для данного применения оболочка, в которой проводят все испытания.
2 Коммутационный аппарат с ручным управлением и устройство защиты от коротких замыканий могут представлять собой единый аппарат и оснащаться дополнительно защитой от перегрузок.
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
protected starter
equipment consisting of a starter, a manually-operated switching device and a short-circuit protective device, rated as a unit by the manufacturer
NOTE 1 The protected starter may or may not be enclosed.
NOTE 2 In the context of this standard, the term “manufacturer“ means any person, company or organization with ultimate responsibility as follows:
– to verify compliance with the appropriate standard;
– to provide the product information according to Clause 6.
NOTE 3 The manually operated switching device and the short-circuit protective device may be just one device and may also incorporate the starter overload protection.
[IEC 60947-4-1, ed. 3.0 (2009-09)]
combination starter
equipment consisting of a protected starter incorporating an isolating function
NOTE Also called "combination motor controller".
[IEC 60947-4-1, ed. 3.0 (2009-09)]FR
démarreur protégé
matériel comprenant un démarreur, un appareil de connexion à commande manuelle et un dispositif de protection contre les courts-circuits, caractérisé comme une unité par le fabricant
NOTE 1 Le démarreur protégé peut ou non être sous enveloppe.
NOTE 2 Dans le contexte de la présente norme, le terme «fabricant» signifie toute personne, entreprise ou organisation ayant la responsabilité ultime:
– de vérifier la conformité avec la norme appropriée;
– de fournir l’information sur le matériel selon l’Article 6.
NOTE 3 L'appareil de connexion à commande manuelle et le dispositif de protection contre les courts-circuits peuvent être seulement un appareil et peuvent également incorporer la protection contre les surcharges du démarreur.
[IEC 60947-4-1, ed. 3.0 (2009-09)]
combiné de démarrage
matériel comprenant un démarreur protégé incorporant une fonction de sectionnement
NOTE Également appelé «combiné contrôleur de moteur».
[IEC 60947-4-1, ed. 3.0 (2009-09)]Параллельные тексты EN-RU
Combination starter
Equipment consisting of a starter and a short-circuit protective device, mounted and wired in a dedicated enclosure. The switching and short-circuit protective devices may be a fuse combination unit, a switch with fuses or a circuit-breaker with or without an isolating function.
[ABB]Комбинированный пускатель
Комбинация пускателя и аппарата защиты от коротких замыканий, смонтированных и соединенных в предусмотренной для этого оболочке. Функции коммутационного аппарата и аппарата защиты от коротких замыканий могут выполнять комбинация с плавкими предохранителями, выключатель с плавкими предохранителями или автоматический выключатель, пригодный или непригодный для разъединения.
[Перевод Интент]Тематики
EN
FR
Англо-русский словарь нормативно-технической терминологии > protected starter
-
18 switchboard
- распределительный щит
- распределительное устройство
- НКУ распределения и управления
- коммутационный щит
- коммутаторная панель
- коммутатор
коммутатор
Устройство, обеспечивающее посредством включения, отключения и переключения электрических цепей выбор требуемой выходной цепи и соединение с ней входной цепи
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]Тематики
- аппарат, изделие, устройство...
EN
DE
FR
коммутаторная панель
распределительный щит
Устройство, конструктивно объединяющее несколько коммутационных элементов, предназначенных для включения, отключения и переключения электрических цепей и каналов связи в ручном режиме.
[Л.М. Невдяев. Телекоммуникационные технологии. Англо-русский толковый словарь-справочник. Под редакцией Ю.М. Горностаева. Москва, 2002]Тематики
- электросвязь, основные понятия
Синонимы
EN
коммутационный щит
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
распределительное устройство
Распределительным устройством (РУ) называется электроустановка, служащая для приема и распределения электроэнергии и содержащая сборные и соединительные шины, коммутационные аппараты, вспомогательные устройства (компрессорные, аккумуляторные и др.), а также устройства защиты, автоматики и измерительные приборы.
[РД 34.20.185-94]
распределительное устройство
Электроустановка, предназначенная для приема и распределения электрической энергии на одном напряжении и содержащая коммутационные аппараты и соединяющие их сборные шины [секции шин], устройства управления и защиты.
Примечание. К устройствам управления относятся аппараты и связывающие их элементы обеспечивающие контроль, измерение, сигнализацию и выполнение команд.
[ ГОСТ 24291-90]
[ ГОСТ Р 53685-2009]
электрическое распределительное устройство
распределительное устройство
Устройство, предназначенное для приема и распределения электроэнергии на одном напряжении и содержащее коммутационные аппараты и соединяющие их сборные соединительные устройства.
Примечание. В состав распределительного устройства дополнительно могут входить устройства защиты и управления
[ОСТ 45.55-99]
распределительное устройство
Электроустановка, служащая для приема и распределения электроэнергии и содержащая коммутационные аппараты, сборные и соединительные шины, вспомогательные устройства (компрессорные, аккумуляторные и др.), а также устройства защиты, автоматики и измерительные приборы.
[ПОТ Р М-016-2001]
[РД 153-34.0-03.150-00]
устройство распределительное
Совокупность аппаратов и приборов для приёма и распределения электроэнергии одного напряжения, вырабатываемой электростанцией или преобразуемой подстанцией
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]EN
switching substation
a substation which includes switchgear and usually busbars, but no power transformers
[IEV number 605-01-02]FR
poste de sectionnement
poste de coupure
poste comprenant des organes de manoeuvre et généralement des jeux de barres, à l'exclusion de transformateurs de puissance
[IEV number 605-01-02]В качестве РУ 6—10 кВ используется сборка высокого напряжения с однополюсными разъединителями и вертикальным расположением фаз одного присоединения и одна камера КСО с выключателем нагрузки и предохранителями для подключения трансформатора. Для РУ 0,4 кВ применяются сборки низкого напряжения с предохранителями и вертикальным расположением фаз одного присоединения.
На ПС применяются открытые (ОРУ), закрытые (ЗРУ) или комплектные (КРУ) распределительные устройства.
[ http://energy-ua.com/elektricheskie-p/klassifikatsiya.html]
В общем случае ПС и РУ являются составной частью электроустановок, которые различаются:
-
по назначению:
- генерирующие,
- преобразовательно-распределительные,
-
потребительские.
Генерирующие электроустановки служат для выработки электроэнергии, преобразовательно-распределительные электроустановки преобразуют электроэнергию в удобный для передачи и потребления вид, передают ее и распределяют между потребителями;
-
по роду тока:
- постоянного тока,
- переменного тока.
-
по напряжению:
- до 1000 В,
- выше 1000 В.
ГОСТ 29322—92 установлена следующая шкала номинальных напряжений:
Шкала номинальных напряжений ограничена сравнительно небольшим числом стандартных значений, благодаря чему изготавливается небольшое число типоразмеров машин и оборудования, а электросети выполняются более экономичными. В установках трехфазного тока номинальным напряжением принято считать напряжение между фазами (междуфазовое напряжение). Согласнодля электросетей переменного тока частотой 50 Гц междуфазовое напряжение должно быть: 12, 24, 36, 42, 127, 220, 380 В; 3, 6, 10, 20, 35, 110, 150, 220, 330, 500, 750 и 1150 кВ;
для электросетей постоянного тока: 12, 24, 36, 48, 60, 110, 220, 440, 660, 825, 3000 В и выше.-
по способу присоединения к электросети ПС разделяются на:
- тупиковые (блочные),
- ответвительные (блочные),
- проходные (транзитные)
- узловые.
Тупиковые ПС получают питание по одной или двум тупиковым ВЛ.
Ответвительные ПС присоединяются ответвлением к одной или двум проходящим ВЛ с односторонним или двухсторонним питанием.
Проходные ПС включаются в рассечку одной или двух проходящих ВЛ с односторонним или двухсторонним питанием.
Узловые ПС кроме питающих имеют отходящие радиальные или транзитные ВЛ.-
по способу управления ПС могут быть:
- только с телесигнализацией,
- телеуправляемыми с телесигнализацией,
- с телесигнализацией и управлением с общеподстанционного пункта управления (ОПУ).
Подстанции оперативно обслуживаются постоянным дежурным персоналом на щите управления, дежурными на дому или оперативно-выездными бригадами (ОВБ). Ремонт ПС осуществляется специализированными выездными бригадами централизованного ремонта или местным персоналом подстанции.
В РУ напряжением до 1000 В провода, шины, аппараты, приборы и конструкции выбирают как по нормальным условиям работы (напряжению и току), так и по термическим и динамическим воздействиям токов коротких замыканий (КЗ) или предельно допустимой отключаемой мощности.
В РУ и ПС напряжением выше 1000 В расстояния между электрооборудованием, аппаратами, токоведущими частями, изоляторами, ограждениями и конструкциями устанавливаются так, чтобы при нормальном режиме работы электроустановки возникающие физические явления (температура нагрева, электрическая дуга, выброс газов, искрение и др.) не могли привести к повреждению оборудования и КЗ.[ http://energy-ua.com/elektricheskie-p/klassifikatsiya.html]
Several different classifications of switchgear can be made:- By the current rating.
-
By interrupting rating (maximum short circuit current that the device can safely interrupt)
- Circuit breakers can open and close on fault currents
- Load-break/Load-make switches can switch normal system load currents
- Isolators may only be operated while the circuit is dead, or the load current is very small.
-
By voltage class:
- Low voltage (less than 1,000 volts AC)
- Medium voltage (1,000–35,000 volts AC)
- High voltage (more than 35,000 volts AC)
-
By insulating medium:
-
By construction type:
- Indoor (further classified by IP (Ingress Protection) class or NEMA enclosure type)
- Outdoor
- Industrial
- Utility
- Marine
- Draw-out elements (removable without many tools)
- Fixed elements (bolted fasteners)
- Live-front
- Dead-front
- Open
- Metal-enclosed
- Metal-clad
- Metal enclosed & Metal clad
- Arc-resistant
-
By IEC degree of internal separation
- No Separation (Form 1)
- Busbars separated from functional units (Form 2a, 2b, 3a, 3b, 4a, 4b)
- Terminals for external conductors separated from busbars (Form 2b, 3b, 4a, 4b)
- Terminals for external conductors separated from functional units but not from each other (Form 3a, 3b)
- Functional units separated from each other (Form 3a, 3b, 4a, 4b)
- Terminals for external conductors separated from each other (Form 4a, 4b)
- Terminals for external conductors separate from their associated functional unit (Form 4b)
-
By interrupting device:
-
By operating method:
- Manually operated
- Motor/stored energy operated
- Solenoid operated
-
By type of current:
-
By application:
-
By purpose
- Isolating switches (disconnectors)
- Load-break switches.
- Grounding (earthing) switches
A single line-up may incorporate several different types of devices, for example, air-insulated bus, vacuum circuit breakers, and manually operated switches may all exist in the same row of cubicles.
Ratings, design, specifications and details of switchgear are set by a multitude of standards. In North America mostly IEEE and ANSI standards are used, much of the rest of the world uses IEC standards, sometimes with local national derivatives or variations.
[Robert W. Smeaton (ed) Switchgear and Control Handbook 3rd Ed., Mc Graw Hill, new York 1997]
[ http://en.wikipedia.org/wiki/High_voltage_switchgear]Тематики
- электрификация, электроснабж. железных дорог
- электроагрегаты генераторные
- электробезопасность
- электроснабжение в целом
Синонимы
EN
- distribution
- energy distribution board
- gear
- switch-gear
- switchboard
- switchgear
- switching substation
- switchyard
DE
FR
распределительный щит
Комплектное устройство, содержащее различную коммутационную аппаратуру, соединенное с одной или более отходящими электрическими цепями, питающееся от одной или более входящих цепей, вместе с зажимами для присоединения нейтральных и защитных проводников.
[ ГОСТ Р МЭК 60050-826-2009]
щит распределительный
Электротехническое устройство, объединяющее коммутационную, регулирующую и защитную аппаратуру, а также контрольно-измерительные и сигнальные приборы
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]
распределительный щит
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]EN
distribution board
assembly containing different types of switchgear and controlgear associated with one or more outgoing electric circuits fed from one or more incoming electric circuits, together with terminals for the neutral and protective conductors.
[IEV number 826-16-08]FR
tableau de répartition, m
ensemble comportant différents types d'appareillage associés à un ou plusieurs circuits électriques de départ alimentés par un ou plusieurs circuits électriques d'arrivée, ainsi que des bornes pour les conducteurs neutre et de protection.
[IEV number 826-16-08]Distribution switchboards, including the Main LV Switchboard (MLVS), are critical to the dependability of an electrical installation. They must comply with well-defined standards governing the design and construction of LV switchgear assemblies
A distribution switchboard is the point at which an incoming-power supply divides into separate circuits, each of which is controlled and protected by the fuses or switchgear of the switchboard. A distribution switchboard is divided into a number of functional units, each comprising all the electrical and mechanical elements that contribute to the fulfilment of a given function. It represents a key link in the dependability chain.
Consequently, the type of distribution switchboard must be perfectly adapted to its application. Its design and construction must comply with applicable standards and working practises.
[Schneider Electric]Распределительные щиты, включая главный распределительный щит низкого напряжения (ГРЩ), играют решающую роль в обеспечении надежности электроустановки. Они должны отвечать требованиям соответствующих стандартов, определяющих конструкцию и порядок изготовления НКУ распределения электроэнергии.
В распределительном щите выполняется прием электроэнергии и ее распределение по отдельным цепям, каждая из которых контролируется и защищается плавкими предохранителями или автоматическими выключателями.
Распределительный щит состоит из функциональных блоков, включающих в себя все электрические и механические элементы, необходимые для выполнения требуемой функции. Распределительный щит представляет собой ключевое звено в цепи обеспечения надежности.
Тип распределительного щита должен соответствовать области применения. Конструкция и изготовление распределительного щита должны удовлетворять требованиям применимых стандартов и учитывать накопленную практику применения.
[Перевод Интент]Рис. Schneider Electric
With Prisma Plus G you can be sure to build 100% Schneider Electric switchboards that are safe, optimised:
> All components (switchgear, distribution blocks, prefabricated connections, etc.) are perfectly rated and coordinated to work together;
> All switchboard configurations, even the most demanding ones, have been tested.
You can prove that your switchboard meets the current standards, at any time.
You can be sure to build a reliable electrical installation and give your customers full satisfaction in terms of dependability and safety for people and the installation.
Prisma Plus G with its discreet design, blends harmoniously into all tertiary and industrial buildings, including in entrance halls and passageways.
With Prisma Plus G you can build just the right switchboard for your customer, sized precisely to fit costs and needs.
With this complete, prefabricated and tested system, it's easy to upgrade your installation and still maintain the performance levels.
> The wall-mounted and floor-standing enclosures combine easily with switchboards already in service.
> Devices can be replaced or added at any time.
[Schneider Electric]С помощью оболочек Prisma Plus G можно создавать безопасные распределительные щиты, на 100 % состоящие из изделий Schneider Electric:
> все изделия (коммутационная аппаратура, распределительные блоки, готовые заводские соединения и т. д.) полностью совместимы механически и электрически;
> все варианты компоновки распределительных щитов, в том числе для наиболее ответственных применений, прошли испытания.В любое время вы можете доказать, что ваши распределительные щиты полностью соответствуют требованиям действующих стандартов.
Вы можете быть полностью уверены в том, что создаете надежные электроустановки, удовлетворяющие всем требованиям безопасности для людей и оборудования
Благодаря строгому дизайну, распределительные щиты Prisma Plus G гармонично сочетаются с интерьером любого общественного или промышленного здания. Они хорошо смотрятся и в вестибюле, и в коридоре.
Применяя оболочки Prisma Plus G можно создавать распределительные щиты, точно соответствующие требованиям заказчика как с точки зрения технических характеристик, так и стоимости.
С помощью данной испытанной системы, содержащей все необходимые компоненты заводского изготовления можно легко модернизировать существующую электроустановку и поддерживать её уровни производительности.> Навесные и напольные оболочки можно легко присоединить к уже эксплуатируемым распределительным щитам.
> Аппаратуру можно заменять или добавлять в любое время.
[Перевод Интент]The switchboard, central to the electrical installation.
Both the point of arrival of energy and a device for distribution to the site applications, the LV switchboard is the intelligence of the system, central to the electrical installation.
[Schneider Electric]Распределительный щит – «сердце» электроустановки.
Низковольтное комплектное устройство распределения является «сердцем» электроустановки, поскольку именно оно принимает электроэнергию из сети и распределяет её по территориально распределенным нагрузкам.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
- электроснабжение в целом
EN
- branch distribution panel
- distributing board
- distributing panel
- distributing switchboard
- distribution bench
- distribution board
- distribution panel
- distribution switchboard
- gear
- keyboard
- PNL
- SB
- sw & d
- switchboard
- switchboard panel
DE
- elektrischer Verteiler, m
- Schalttafel
- Verteiler, m
FR
- tableau de distribution
- tableau de répartition, m
Англо-русский словарь нормативно-технической терминологии > switchboard
-
19 switchgear and controlgear
- НКУ распределения и управления
- коммутационная аппаратура и аппаратура управления
- аппаратура распределения и управления
аппаратура распределения и управления
Общий термин для коммутационных аппаратов и их комбинации с относящимися к ним устройствами управления, измерения, защиты и регулирования, а также для узлов, в которых такие аппараты и устройства соединяются с соответствующими фидерами, комплектующим оборудованием, оболочками и опорными конструкциями.
МЭК 60050 (441-11-01) [1].
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
switchgear and controlgear
general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEC 62271-1, ed. 1.0 (2007-10)]FR
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu’aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEC 62271-1, ed. 1.0 (2007-10)]Тематики
- аппарат, изделие, устройство...
EN
DE
- Schaltanlagen und/oder Schaltgeräte
FR
коммутационная аппаратура и аппаратура управления
Электрическое оборудование, предназначенное для присоединения к электрической цепи с целью выполнения одной или более следующих функций: защиты, управления, разъединения, коммутации.
[ ГОСТ Р МЭК 60050-826-2009]EN
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03]FR
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03]Тематики
- аппарат, изделие, устройство...
- электроустановки
EN
DE
- Schaltgerät, n
- Steuergerät, n
FR
- appareillage, m
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Англо-русский словарь нормативно-технической терминологии > switchgear and controlgear
-
20 PF
- формирователь импульсов
- фильтр предварительной очистки
- фильтр грубой очистки
- снарядный режим течения (двухфазного потока)
- силовой предохранитель
- потокораспределение
- плоский торец
- отказ элемента (системы)
- отказ детали (оборудования)
- коэффициент мощности
- вентилятор для продувки
вентилятор для продувки
(напр. рукавов рукавного фильтра на ТЭС)
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
EN
коэффициент мощности
Скалярная величина, равная отношению активной мощности двухполюсника к полной мощности.
[ ГОСТ Р 52002-2003]
коэффициент мощности (цепи)
Отношение активного сопротивления к полному сопротивлению при промышленной частоте в эквивалентной цепи, которая считается состоящей из последовательно соединенных индуктивного и активного сопротивлений
[ ГОСТ Р 52565-2006]EN
power factor
under periodic conditions, ratio of the absolute value of the active power P to the apparent power S:
NOTE – Under sinusoidal conditions, the power factor is the absolute value of the active factor.
[IEV ref 131-11-46]FR
facteur de puissance, m
en régime périodique, rapport de la valeur absolue de la puissance active P à la puissance apparente S:
NOTE – En régime sinusoïdal, le facteur de puissance est la valeur absolue du facteur de puissance active.
[IEV ref 131-11-46]
Для синусоидального тока коэффициент мощности равен косинусу угла сдвига фаз между напряжением и током, т. е. равен Cos φ.
После того, как стали массово применяться такие нелинейные нагрузки, как компьютеры и другое офисное и телекоммуникационное оборудование, термин коэффициент мощности перестал быть синонимом термина Cos φ.Тематики
- качество электрической энергии
- электромагнитная совместимость
- электроснабжение в целом
- электротехника, основные понятия
Близкие понятия
Действия
Синонимы
EN
DE
FR
отказ детали (оборудования)
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
EN
отказ элемента (системы)
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
EN
потокораспределение
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
ГОСТ 17242-86 - Предохранители плавкие силовые низковольтные. Общие технические условия.
Плавкий силовой предохранительПараллельные тексты EN-RU
Power fuses are suitable for the protection from a short-circuit, Overload current will not protected.
[LS Industrial SystemsСиловые предохранители предназначены для защиты от короткого замыкания и не защищают от токов перегрузки.
[Перевод Интент]LS current limiting power fuse can protect the devices and systems from fault current by interrupting within half cycle.
[LS Industrial Systems]Токоограничивающие плавкие силовые предохранители LS защищают аппараты и системы от тока короткого замыкания размыканием цепи в течение полупериода.
[Перевод Интент]LS Prime-MEC power fuses are designed to protect equipments from fault current such as short-circuit, and generally used for the protection the circuits of transformers, capacitors and motors they protect.
[LS Industrial Systems]Силовые предохранители LS Prime-MEC предназначены для защиты оборудования от токов неисправности, таких как короткое замыкание, и в основном применяются для защиты цепей трансформаторов, конденсаторов и электродвигателей.
[Перевод Интент]Power fuses for combination with vacuum contactors.
[LS Industrial Systems]Силовые предохранители, комбинируемые с вакуумными контакторами
[Перевод Интент]Power fused type vacuum contactors, in-house tested according to IEC 60282-1, can provide short-circuit protection up to 40kA.
[LS Industrial Systems]Контакторы, комбинированные с плавкими силовыми предохранителями, испытаны в соответствии с МЭК 60282-1 и обеспечивают защиту от токов короткого замыкания до 40 кА.
[Перевод Интент]Power fuses can be installed into combination (G, GB) type contactors for the protection of equipments and systems from short-circuit.
[LS Industrial Systems]Для защиты оборудования и систем от короткого замыкания контакторы с вариантом установки G и GB можно комбинировать с силовыми плавкими предохранителями.
[Перевод Интент]Тематики
Синонимы
EN
- PF
- power fuse
Смотри также
снарядный режим течения (двухфазного потока)
поршневой режим течения
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
Синонимы
EN
фильтр предварительной очистки
фильтр грубой очистки
—
[А.С.Гольдберг. Англо-русский энергетический словарь. 2006 г.]Тематики
Синонимы
EN
формирователь импульсов
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
Англо-русский словарь нормативно-технической терминологии > PF
См. также в других словарях:
combination circuit — kombinuotoji grandinė statusas T sritis Gynyba apibrėžtis Sprogdiklio sistema, sužadinanti dviejų ar daugiau poveikių, gaunamų vienu metu ar iš anksto nustatytu laiko tarpu. atitikmenys: angl. combination circuit pranc. mise de feu combinée… … NATO terminų aiškinamasis žodynas
Circuit training — is a form of conditioning combining resistance training and high intensity aerobics. It is designed to be easy to follow and target strength building as well as muscular endurance. An exercise circuit is one completion of all prescribed exercises … Wikipedia
Circuit City Stores — This article is about the defunct company that operated from 1949 to 2009. For the online retailer owned by Systemax, see CircuitCity.com. Circuit City Stores, Inc. The final 2001 2009 logo Former type Public … Wikipedia
Circuit de Spa-Francorchamps — Coordinates: 50°26′14″N 5°58′17″E / 50.43722°N 5.97139°E / 50.43722; 5.97139 … Wikipedia
Circuit de la Sarthe — For the French road bicycle racing stage race, see Circuit de la Sarthe (cycling) Circuit des 24 Heures Circuit de la Sarthe Location Le Mans, France … Wikipedia
Circuit design — The process of circuit design can cover systems ranging from complex electronic systems all the way down to the individual transistors within an integrated circuit. For simple circuits the design process can often be done by one person without… … Wikipedia
Circuit Paul Ricard — Paul Ricard High Tech Test Track Location Le Castellet, France Time zone GMT +1 (DST: +2) Coordinates … Wikipedia
combination firing circuit — kombinuotoji sprogdinimo grandinė statusas T sritis Gynyba apibrėžtis Sujungtos dvi atskiros sprogdiklių sistemos, kurių viena yra elektrinė, o kita neelektrinė, kad naudojant bet kurią sistemą būtų susprogdinti visi užtaisai. atitikmenys: angl.… … NATO terminų aiškinamasis žodynas
circuit — /ˈsɜkət / (say serkuht) noun 1. the act of going or moving round. 2. any circular or roundabout journey; a round. 3. any racing track which leads back to its starting place so that contestants may move around it continuously. 4. a periodical… …
circuit combiné de mise de feu — kombinuotoji sprogdinimo grandinė statusas T sritis Gynyba apibrėžtis Sujungtos dvi atskiros sprogdiklių sistemos, kurių viena yra elektrinė, o kita neelektrinė, kad naudojant bet kurią sistemą būtų susprogdinti visi užtaisai. atitikmenys: angl.… … NATO terminų aiškinamasis žodynas
Arc-fault circuit interrupter — An arc fault circuit interrupter (AFCI) is a circuit breaker designed to prevent fires by detecting non working electrical arcs and disconnect power before the arc starts a fire. The AFCI should distinguish between a working arc that may occur in … Wikipedia
Перевод: со всех языков на русский
с русского на все языки- С русского на:
- Все языки
- Со всех языков на:
- Все языки
- Английский
- Арабский
- Немецкий
- Русский
- Французский