Перевод: с французского на русский

с русского на французский

assembly

  • 1 ensemble d'appareillage de puissance

    1. силовое комплектное устройство распределения и управления
    2. НКУ распределения и управления

     

    низковольтное устройство распределения и управления (НКУ)
    Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
    [ ГОСТ Р МЭК 61439-1-2012]

    низковольтное устройство распределения и управления

    Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
    Примечания
    1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
    2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
    3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    power switchgear and controlgear assembly (PSC-assembly)
    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    [IEC 61439-2, ed. 1.0 (2009-01)]

    low-voltage switchgear and controlgear assembly
    combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
    [IEC 61892-3, ed. 2.0 (2007-11)]

    switchgear and controlgear
    a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEV number 441-11-01]

    switchgear and controlgear

    electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
    NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
    [IEV number 826-16-03 ]

    switchboard
    A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
    [ McGraw-Hill Dictionary of Architecture & Construction]

    switchboard
    One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
    [ The American Heritage Dictionary of the English Language]

    FR

    ensemble d'appareillage de puissance (ensemble PSC)
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    [IEC 61439-2, ed. 1.0 (2009-01)]

    appareillage, m
    matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
    NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
    [IEV number 826-16-03 ]

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEV number 441-11-01]


    A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
    Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
    The types of switchboards, classified by basic features of construction, are as follows:
    1. Live-front vertical panels
    2. Dead-front boards
    3. Safety enclosed boards( metal-clad)


    [American electricians’ handbook]

    Параллельные тексты EN-RU

    The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.

    Its definition, design and installation are based on precise rules; there is no place for improvisation.

    The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.

    It specifies in particular:

    > the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;

    > the design and verification rules, constituting a benchmark for product certification.

    All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.


    Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.

    A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.

    Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.

    What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

    [Schneider Electric]

    НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.

    Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.

    Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).

    В частности, он определяет:

    > распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;

    > конструкцию, технические характеристики, виды и методы испытаний НКУ.

    В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.

    Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.

    Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.

    Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.

    Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.

    [Перевод Интент]

     

    LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.

    The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.

    In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.

    Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.

    The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.

    [ABB]

    Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.

    Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам

    Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.

    Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются

    Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Действия

    Синонимы

    Сопутствующие термины

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

     

    силовое комплектное устройство распределения и управления
    СНКУ

    Низковольтное комплектное устройство распределения и управления, применяемое для распределения и управления энергией всех типов нагрузок промышленного, коммерческого и аналогичного назначений, не предназначенное для управления не квалифицированным персоналом.
    [ ГОСТ Р МЭК 61439.2-2012]

    EN

    power switchgear and controlgear assembly
    PSC-assembly

    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    NOTE It is not excluded for a PSC-assembly to be located in an area accessible to ordinary persons.
    [IEC 61439-2, ed. 2.0 (2011-08)]

    FR

    ensemble d'appareillage de puissance
    ensemble EAP
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    NOTE Il n’est pas exclu d’implanter un ensemble EAP dans une zone accessible aux personnes ordinaires.
    [IEC 61439-2, ed. 2.0 (2011-08)]

    Тематики

    • НКУ (шкафы, пульты,...)

    Синонимы

    EN

    FR

    Франко-русский словарь нормативно-технической терминологии > ensemble d'appareillage de puissance

  • 2 appareillage

    1. Станочное приспособление
    2. НКУ распределения и управления
    3. аппаратура распределения и управления

     

    аппаратура распределения и управления
    Общий термин для коммутационных аппаратов и их комбинации с относящимися к ним устройствами управления, измерения, защиты и регулирования, а также для узлов, в которых такие аппараты и устройства соединяются с соответствующими фидерами, комплектующим оборудованием, оболочками и опорными конструкциями.
    МЭК 60050 (441-11-01) [1].
    [ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]

    EN

    switchgear and controlgear
    general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEC 62271-1, ed. 1.0 (2007-10)]

    FR

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu’aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEC 62271-1, ed. 1.0 (2007-10)]

    Тематики

    • аппарат, изделие, устройство...

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

     

    низковольтное устройство распределения и управления (НКУ)
    Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
    [ ГОСТ Р МЭК 61439-1-2012]

    низковольтное устройство распределения и управления

    Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
    Примечания
    1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
    2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
    3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    power switchgear and controlgear assembly (PSC-assembly)
    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    [IEC 61439-2, ed. 1.0 (2009-01)]

    low-voltage switchgear and controlgear assembly
    combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
    [IEC 61892-3, ed. 2.0 (2007-11)]

    switchgear and controlgear
    a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEV number 441-11-01]

    switchgear and controlgear

    electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
    NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
    [IEV number 826-16-03 ]

    switchboard
    A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
    [ McGraw-Hill Dictionary of Architecture & Construction]

    switchboard
    One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
    [ The American Heritage Dictionary of the English Language]

    FR

    ensemble d'appareillage de puissance (ensemble PSC)
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    [IEC 61439-2, ed. 1.0 (2009-01)]

    appareillage, m
    matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
    NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
    [IEV number 826-16-03 ]

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEV number 441-11-01]


    A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
    Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
    The types of switchboards, classified by basic features of construction, are as follows:
    1. Live-front vertical panels
    2. Dead-front boards
    3. Safety enclosed boards( metal-clad)


    [American electricians’ handbook]

    Параллельные тексты EN-RU

    The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.

    Its definition, design and installation are based on precise rules; there is no place for improvisation.

    The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.

    It specifies in particular:

    > the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;

    > the design and verification rules, constituting a benchmark for product certification.

    All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.


    Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.

    A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.

    Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.

    What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

    [Schneider Electric]

    НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.

    Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.

    Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).

    В частности, он определяет:

    > распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;

    > конструкцию, технические характеристики, виды и методы испытаний НКУ.

    В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.

    Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.

    Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.

    Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.

    Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.

    [Перевод Интент]

     

    LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.

    The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.

    In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.

    Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.

    The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.

    [ABB]

    Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.

    Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам

    Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.

    Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются

    Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Действия

    Синонимы

    Сопутствующие термины

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

    1. Станочное приспособление

    СП

    D. Werkstückaufnahmevorrichtung

    E. Machine retaining device

    F. Appareillage

    Приспособление, применяемое на металлорежущем и (или) деревообрабатывающем станке

    Источник: ГОСТ 31.010.01-84: Приспособления станочные. Термины и определения оригинал документа

    Франко-русский словарь нормативно-технической терминологии > appareillage

  • 3 ensemble PSC

    1. НКУ распределения и управления

     

    низковольтное устройство распределения и управления (НКУ)
    Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
    [ ГОСТ Р МЭК 61439-1-2012]

    низковольтное устройство распределения и управления

    Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
    Примечания
    1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
    2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
    3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    power switchgear and controlgear assembly (PSC-assembly)
    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    [IEC 61439-2, ed. 1.0 (2009-01)]

    low-voltage switchgear and controlgear assembly
    combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
    [IEC 61892-3, ed. 2.0 (2007-11)]

    switchgear and controlgear
    a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
    [IEV number 441-11-01]

    switchgear and controlgear

    electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
    NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
    [IEV number 826-16-03 ]

    switchboard
    A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
    [ McGraw-Hill Dictionary of Architecture & Construction]

    switchboard
    One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
    [ The American Heritage Dictionary of the English Language]

    FR

    ensemble d'appareillage de puissance (ensemble PSC)
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    [IEC 61439-2, ed. 1.0 (2009-01)]

    appareillage, m
    matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
    NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
    [IEV number 826-16-03 ]

    appareillage
    terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
    [IEV number 441-11-01]


    A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
    Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
    The types of switchboards, classified by basic features of construction, are as follows:
    1. Live-front vertical panels
    2. Dead-front boards
    3. Safety enclosed boards( metal-clad)


    [American electricians’ handbook]

    Параллельные тексты EN-RU

    The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.

    Its definition, design and installation are based on precise rules; there is no place for improvisation.

    The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.

    It specifies in particular:

    > the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;

    > the design and verification rules, constituting a benchmark for product certification.

    All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.


    Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.

    A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.

    Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.

    What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.

    [Schneider Electric]

    НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.

    Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.

    Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).

    В частности, он определяет:

    > распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;

    > конструкцию, технические характеристики, виды и методы испытаний НКУ.

    В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.

    Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.

    Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.

    Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.

    Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.

    [Перевод Интент]

     

    LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.

    The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.

    In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.

    Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.

    The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.

    [ABB]

    Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.

    Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам

    Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.

    Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются

    Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Действия

    Синонимы

    Сопутствующие термины

    EN

    DE

    • Schaltanlagen und/oder Schaltgeräte

    FR

    Франко-русский словарь нормативно-технической терминологии > ensemble PSC

  • 4 constructeur d'origine

    1. разработчик НКУ
    2. изготовитель НКУ

     

    изготовитель НКУ
    Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
    [ ГОСТ Р МЭК 61439-1-2013]

    EN

    original manufacturer
    organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
    [IEC 61439-1, ed. 2.0 (2011-08)]

    FR

    constructeur d'origine
    organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
    [IEC 61439-1, ed. 2.0 (2011-08)]

    Параллельные тексты EN-RU

    6.1 ASSEMBLY designation marking

    The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.

    Compliance is checked according to the test of 10.2.7 and by inspection.

    The following information regarding the ASSEMBLY shall be provided on the designation label(s):
    a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
    b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
    c) means of identifying date of manufacture;
    d) IEC 61439-X (the specific part “X” shall be identified).

    NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.


    [BS EN 61439-1:2009]

    6.1 Маркировка

    Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.

    Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.

    На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
    a) наименование изготовителя или его товарный знак (см. 3.10.2):
    b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
    c) обозначение даты изготовления;
    d) обозначение настоящего стандарта.

    Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.


    [ ГОСТ Р МЭК 61439.1-2013]


    Тематики

    • НКУ (шкафы, пульты,...)

    Синонимы

    EN

    FR

     

    разработчик НКУ
    -
    [Интент]

    разработчик НКУ
    Организация, которая выполнила разработку конструкции и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
    [ ГОСТ Р МЭК 61439.1-2012]

    EN

    original manufacturer
    organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
    [IEC 61439-1, ed. 2.0 (2011-08)]

    FR

    constructeur d'origine
    organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
    [IEC 61439-1, ed. 2.0 (2011-08)]

    Тематики

    • НКУ (шкафы, пульты,...)

    EN

    FR

    Франко-русский словарь нормативно-технической терминологии > constructeur d'origine

  • 5 ensemble (d'appareillage de connexion et de commande)

    1. НКУ защищенное
    2. комплектное устройство заводского изготовления

     

    -

    EN

    factory-built assembly (of switchgear and controlgear)
    FBA
    an assembly built and assembled under the responsibility of the manufacturer and conforming to an established type or system, without deviations likely to influence the performance significantly from that of the typical assembly verified to be in accordance with the relevant standard
    [IEV number 441-12-03 ]

    FR

    ensemble (d'appareillage de connexion et de commande)
    monté en usine
    EMU
    ensemble construit et monté sous la responsabilité du constructeur et conforme à un type ou à un système établi sans s'écarter d'une manière qui influencerait notablement les performances par rapport à celles de l'ensemble type qui a été vérifié conforme à la norme correspondante
    [IEV number 441-12-03 ]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    EN

    DE

    FR

     

    НКУ защищенное
    НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    защищенное НКУ
    НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    enclosed assembly (of switchgear and controlgear)
    an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
    NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
    [IEV number 441-12-02]

    FR

    ensemble (d'appareillage de connexion et de commande)
    sous enveloppe
    ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
    NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
    [IEV number 441-12-0

    0078
    Шкаф - защищенное НКУ, предназначенное для установки на полу


    Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
    Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
    Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.


    Safety enclosed switchgear may be classified with respect to purpose of application as follows:
    1. General medium- or high-voltage switchgear
    2. Primary unit substations
    3. Rectifier unit substations
    4. Secondary unit substations or power centers
    5. General low-voltage switchgear
    6. Low-voltage distribution switchboards
    7. Motor-control-center switchboards

    [American electricians’ handbook]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > ensemble (d'appareillage de connexion et de commande)

  • 6 ensemble EAP

    1. силовое комплектное устройство распределения и управления

     

    силовое комплектное устройство распределения и управления
    СНКУ

    Низковольтное комплектное устройство распределения и управления, применяемое для распределения и управления энергией всех типов нагрузок промышленного, коммерческого и аналогичного назначений, не предназначенное для управления не квалифицированным персоналом.
    [ ГОСТ Р МЭК 61439.2-2012]

    EN

    power switchgear and controlgear assembly
    PSC-assembly

    low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
    NOTE It is not excluded for a PSC-assembly to be located in an area accessible to ordinary persons.
    [IEC 61439-2, ed. 2.0 (2011-08)]

    FR

    ensemble d'appareillage de puissance
    ensemble EAP
    ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
    NOTE Il n’est pas exclu d’implanter un ensemble EAP dans une zone accessible aux personnes ordinaires.
    [IEC 61439-2, ed. 2.0 (2011-08)]

    Тематики

    • НКУ (шкафы, пульты,...)

    Синонимы

    EN

    FR

    Франко-русский словарь нормативно-технической терминологии > ensemble EAP

  • 7 partie débrochable (d'un ensemble)

    1. выдвижная часть

     

    выдвижная часть
    Съемная часть, которая может быть перемещена из присоединенного положения либо в отсоединенное положение, либо в испытательное положение, оставаясь механически соединенной с НКУ.

    0090 [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    выдвижная неотделяемая часть
    Часть СНКУ, которая может быть либо отсоединена от него, либо установлена в испытательное положение, оставаясь механически соединенной с СНКУ.
    [ ГОСТ Р МЭК 61439.2-2012]

    EN

    withdrawable part (of an assembly)
    a removable part of an assembly that can be moved to one or more positions in which an isolating distance or a segregation between open contacts is established while the part remains mechanically attached to the assembly
    NOTE – The isolating distance or the segregation always relates to the main circuit. It may or may not refer to the auxiliary circuits or to control circuits.
    [IEV number 441-13-09]

    withdrawable part
    removable part intended to be moved from the connected position to the isolated position and to a test position, if any, whilst remaining mechanically attached to the PSC-assembly
    [IEC 61439-2, ed. 2.0 (2011-08)]

    FR

    partie débrochable (d'un ensemble)
    partie amovible d'un ensemble qui, tout en demeurant reliée mécaniquement à l'ensemble peut être déplacée jusqu'à la ou l'une des positions établissant une distance de sectionnement ou un cloisonnement métallique entre contacts ouverts
    NOTE – Cette distance de sectionnement ou ce cloisonnement métallique concerne toujours le circuit principal. Elle peut concerner ou non les circuits auxiliaires ou les circuits de commande.
    [IEV number 441-13-09]

    partie débrochable
    partie amovible prévue pour être déplacée de la position raccordée à la position de sectionnement et à une éventuelle position d'essai tout en restant mécaniquement reliée à l'ensemble EAP
    [IEC 61439-2, ed. 2.0 (2011-08)]


    7.6.4.2 Блокировка и замки для выдвижных частей
    Как правило, выдвижные части должны иметь устройство, гарантирующее передвижение их в разные положения только после отключения главной цепи.
    Для предотвращения недозволенных операций выдвижные части должны иметь замки или запоры, фиксирующие их в одном или более положениях.

    [ ГОСТ 22789-94( МЭК 439-1-85)]
    0425
    Рис. Schneider Electric Параллельные тексты EN-RU

    The modularity of the Blokset functional switchboards means you can modify or upgrade them with ease to adapt to your changing processes.
    The withdrawable drawers let you make these upgrades while the equipment is energised, without cutting switchboard supply and in complete safety
    . The withdrawable drawers have 3 positions: connected, disconnected and safe testing.

    [Schneider Electric]

    НКУ Blokset имеет модульную конструкцию, что позволяет в случае изменения технологического  процесса легко изменять или модернизировать такое НКУ.
    Выдвижные ящики позволяют проводить
    совершенно безопасно модернизацию НКУ без отключения питания НКУ и электроустановки. Выдвижные ящики имеют три положения: присоединенное, отсоединенное и безопасное испытательное.

    [Перевод Интент]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Синонимы

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > partie débrochable (d'un ensemble)

  • 8 conducteur (isolé)

    1. изолированный провод
    2. изолированная жила (термин употребляется в Северной Америке)

     

    изолированная жила (термин употребляется в Северной Америке)
    совокупность элементов, состоящая из жилы, ее изоляции (и экранов, если они есть)
    Примечание. В Северной Америке термин «core of a cable» определяется как совокупность компонентов кабеля, расположенных под общим защитным покровом, таким как оболочка. Такое применение этого термина не допустимо
    [IEV number 461-04-04]

    EN

    core
    insulated conductor

    assembly comprising a conductor with its own insulation (and screens if any)
    NOTE – In North American usage, the core of a cable has been defined as the assembly of components of a cable lying under a common covering such as the sheath. Such usage is deprecated.
    [IEV number 461-04-04]

    FR

    conducteur (isolé)
    ensemble comprenant l'âme, son enveloppe isolante et ses écrans éventuels
    NOTE – En Amérique du Nord le terme “core of a cable” a été défini comme l'ensemble des constituants d'un câble disposés sous un revêtement commun, tel que la gaine. L'utilisation de ce terme est déconseillée dans ce sens.
    [IEV number 461-04-04]

    Тематики

    • кабели, провода...

    EN

    DE

    • Ader, f

    FR

     

    изолированный провод

    [Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]

    EN

    core insulated conductor
    assembly comprising a conductor and its own insulation (and screens, if any)
    [IEC 61892-4, ed. 1.0 (2007-06)]

    core-insulated conductor (North America)
    assembly comprising a conductor and its own insulation (and screens, if any)
    NOTE In North American usage, the core of a cable has been defined as the assembly of components of a cable lying under a common covering such as the sheath (jacket).
    [IEC 60092-350, ed. 3.0 (2008-02)]

    FR

    conducteur (isolé)
    ensemble comprenant l'âme, son enveloppe isolante et ses écrans éventuels
    Note – En Amérique du Nord le terme “core of a cable” a été défini comme l'ensemble des constituants d'un câble disposés sous un revêtement commun, tel que la gaine. L'utilisation de ce terme est déconseillée dans ce sens.
    [ IEV ref 461-04-04]

    5595

    Рис. Schneider Electric

    Параллельные тексты EN-RU

    An insulated conductor is made up of a conductor core and its
    insulating envelope.

    [Schneider Electric]

    Изолированный провод состоит из токопроводящей жилы и изоляции провода.
    [Перевод Интент]

    Тематики

    • кабели, провода...

    EN

    DE

    • Ader, f

    FR

    Франко-русский словарь нормативно-технической терминологии > conducteur (isolé)

  • 9 circuit auxiliaire (d'un ensemble)

    1. вспомогательная цепь НКУ

     

    вспомогательная цепь НКУ
    Все токоведущие части НКУ, включенные в цепь, предназначенную для управления, измерения, сигнализации, регулирования, обработки и передачи данных и т. д. и не являющуюся главной цепью.
    Примечание — Цепи управления и вспомогательные цепи коммутационных аппаратов относятся к вспомогательным цепям.
    (МЭС 441-13-03, с изменением)
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    вспомогательная цепь НКУ
    Совокупность токоведущих частей комплекта, входящих в цепь (кроме главной цепи), предназначенную для управления, измерения, сигнализации, регулирования и обработки данных и т.д.
    Примечание — Вспомогательные цепи комплекта включают цепи управления и вспомогательные цепи коммутационных устройств.
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    auxiliary circuit (of an assembly)
    all the conductive parts of an assembly of switchgear and controlgear included in a circuit (other than the main circuit) intended to control, measure, signal and regulate
    NOTE – The auxiliary circuits of an assembly include the control and auxiliary circuits of the switching devices.
    [IEV number 441-13-03]

    FR

    circuit auxiliaire (d'un ensemble)
    toutes les pièces conductrices d'un ensemble insérées dans un circuit, autre que le circuit principal, destinées à la commande, la mesure, la signalisation et la régulation
    NOTE – Les circuits auxiliaires d'un ensemble comprennent les circuits de commande et les circuits auxiliaires des appareils de connexion.
    [IEV number 441-13-03]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Синонимы

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > circuit auxiliaire (d'un ensemble)

  • 10 EMU

    1. комплектное устройство заводского изготовления

     

    -

    EN

    factory-built assembly (of switchgear and controlgear)
    FBA
    an assembly built and assembled under the responsibility of the manufacturer and conforming to an established type or system, without deviations likely to influence the performance significantly from that of the typical assembly verified to be in accordance with the relevant standard
    [IEV number 441-12-03 ]

    FR

    ensemble (d'appareillage de connexion et de commande)
    monté en usine
    EMU
    ensemble construit et monté sous la responsabilité du constructeur et conforme à un type ou à un système établi sans s'écarter d'une manière qui influencerait notablement les performances par rapport à celles de l'ensemble type qui a été vérifié conforme à la norme correspondante
    [IEV number 441-12-03 ]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > EMU

  • 11 monté en usine

    1. комплектное устройство заводского изготовления

     

    -

    EN

    factory-built assembly (of switchgear and controlgear)
    FBA
    an assembly built and assembled under the responsibility of the manufacturer and conforming to an established type or system, without deviations likely to influence the performance significantly from that of the typical assembly verified to be in accordance with the relevant standard
    [IEV number 441-12-03 ]

    FR

    ensemble (d'appareillage de connexion et de commande)
    monté en usine
    EMU
    ensemble construit et monté sous la responsabilité du constructeur et conforme à un type ou à un système établi sans s'écarter d'une manière qui influencerait notablement les performances par rapport à celles de l'ensemble type qui a été vérifié conforme à la norme correspondante
    [IEV number 441-12-03 ]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > monté en usine

  • 12 compartiment (d'un ensemble)

    1. отсек (в НКУ)

     

    отсек
    Секция или подсекция защищенные, за исключением отверстий, необходимых для соединений, контроля или вентиляции
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
    [ ГОСТ Р МЭК 61439.1-2013]

    отсек
    Часть внутреннего пространства ВРУ, предназначенная для размещения функционального блока(ов), огражденная со всех сторон перегородками и/или стенками и закрываемая отдельной внутренней дверцей или дверью ВРУ
    [ ГОСТ Р 51732-2001]

    отсек
    Отгороженная часть секции или подсекции, за исключением отверстий, необходимых для выполнения электрических соединений, контроля состояния или вентиляции.
    [Перевод Интент]

    EN

    compartment (of an assembly)
    a part of an assembly enclosed except for openings necessary for interconnection, control or ventilation
    [IEV number 441-13-05]


    compartment
    the term compartment is used to define a completely enclosed part of a section (sub-section), excepted for the openings necessary for interconnection, control and ventilation
    [ABB]

    FR

    compartiment (d'un ensemble)
    partie fermée d'un ensemble à l'exception des ouvertures nécessaires aux connexions, à la commande ou à la ventilation
    [IEV number 441-13-05]

    0477

    Рис. ABB
    Enclosed assembly, built by three sections; each section is in its turn subdivided into more compartments
    Защищенное НКУ, состоящее из трех секций, каждая из которых разделена на отсеки
    [Перевод Интент]

    0074
    Оболочка шкафа с двумя отсеками

    Недопустимые, нерекомендуемые

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > compartiment (d'un ensemble)

  • 13 constructeur d’ensembles

    1. сборщик НКУ

     

    сборщик НКУ
    Организация, ответственная за сборку НКУ.
    Примечание. Разработчик и сборщик НКУ могут быть разными организациями.
    [ ГОСТ Р МЭК 61439-1-2012]

    EN

    assembly manufacturer
    organization taking the responsibility for the completed assembly
    NOTE The assembly manufacturer may be a different organisation to the original manufacturer.
    [IEC 61439-1, ed. 2.0 (2011-08)]

    FR

    constructeur d’ensembles
    organisme prenant la responsabilité de l’ensemble fini
    NOTE Le constructeur d’ensembles peut être un organisme différent du constructeur d'origine.
    [IEC 61439-1, ed. 2.0 (2011-08)]

    Тематики

    • НКУ (шкафы, пульты,...)

    EN

    FR

    • constructeur d’ensembles

    Франко-русский словарь нормативно-технической терминологии > constructeur d’ensembles

  • 14 unité fonctionnelle (d'un ensemble)

    1. функциональный блок (в НКУ)

     

    функциональный блок
    Часть НКУ, содержащая электрические и механические элементы и обеспечивающая выполнение одной функции.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    функциональный блок
    Часть взаимосвязанных аппаратов ВРУ или панели (многопанельного ВРУ), обеспечивающая выполнение определенной функции по 3.1.1.
    Примечание — Аппараты блока могут быть не объединены единой съемной конструктивной основой
    [ ГОСТ Р 51732-2001]

    функциональный блок
    Часть НКУ, содержащая электрические и механические элементы, включая коммутационные устройства, и обеспечивающая выполнение одной функции.
    Примечание — Проводники, соединенные с функциональным блоком, но являющиеся внешними по отношению к его отсеку или к оболочке защищенного пространства (например кабели вспомогательных цепей, соединенные с общим отсеком), не являются частью функционального блока.
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    functional unit (of an assembly)
    a part of an assembly of switchgear and controlgear comprising all the components of the main circuits and auxiliary circuits that contribute to the fulfilment of a single function
    NOTE – Functional units may be distinguished according to the function for which they are intended e.g.: incoming unit, through which electrical energy is normally fed into the assembly, outgoing unit through which electrical energy is normally supplied to one or more external circuits.
    [IEV number 441-13-04 ]

    FR

    unité fonctionnelle (d'un ensemble)
    partie d'un ensemble comprenant tous les éléments des circuits principaux et des circuits auxiliaires qui concourent à l'exécution d'une seule fonction
    NOTE – Les unités fonctionnelles peuvent se différencier selon la fonction pour laquelle elles sont prévues, par exemple: unité d'arrivée par laquelle l'énergie électrique est normalement fournie à un ensemble, unité de départ par laquelle l'énergie électrique est normalement fournie à un ou plusieurs circuits externes.
    [IEV number 441-13-04 ]

    0072

    Пример функционального блока

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > unité fonctionnelle (d'un ensemble)

  • 15 circuit principal (d'un ensemble)

    1. главная цепь НКУ

     

    главная цепь НКУ
    Совокупность токоведущих частей комплекта, входящих в цепь, предназначенную для передачи электроэнергии.
    [ ГОСТ Р МЭК 61439-1-2012]

    главная цепь НКУ
    Все токоведущие части НКУ, включенные в цепь, предназначенную для передачи электрической энергии.
    (МЭС 441-13-02).
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    EN

    main circuit (of an assembly)
    all the conductive parts of an assembly included in a circuit which is intended to transmit electrical energy
    [IEV number 441-13-02]

    FR

    circuit principal (d'un ensemble)
    toutes les pièces conductrices d'un ensemble qui font partie d'un circuit destiné à transporter l'énergie électrique
    [IEV number 441-13-02]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Синонимы

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > circuit principal (d'un ensemble)

  • 16 volet (d'un ensemble)

    1. заслонка

     

    заслонка
    Элемент, который может перемещаться из положения, позволяющего осуществлять соединение контактов съемных или выдвижных частей с неподвижными контактами, в положение, при котором он становится частью элемента оболочки или перегородки, ограждающей неподвижные контакты.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    заслонка
    Часть НКУ, которая может перемещаться из положения при котором она позволяет контактам выдвижной отделяемой части или выдвижной неотделяемой части сомкнуться с неподвижными контактами, в положение, при котором она становится частью оболочки или перегородки, ограждающей неподвижные контакты.
    [ ГОСТ Р МЭК 61439-1-2013]

    EN

    shutter (of an assembly)
    a part of an assembly that can be moved from a position where it permits contacts of a removable part to engage fixed contacts, to a position where it becomes a part of the enclosure or partition shielding the fixed contacts
    [IEV number 441-13-07]

    FR

    volet (d'un ensemble)
    partie d'un ensemble qui peut être déplacée d'une position dans laquelle elle permet l'embrochage des contacts d'une partie amovible sur des contacts fixes à une position dans laquelle elle constitue une partie de l'enveloppe ou d'une cloison protégeant les contacts fixes
    [IEV number 441-13-07]

    5490
    Рис. Schneider Electric

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > volet (d'un ensemble)

  • 17 appareillage pour l'intérieur

    1. НКУ внутренней установки

     

    НКУ внутренней установки
    НКУ, предназначенное для эксплуатации внутри помещений
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    НКУ для внутренней установки

    НКУ, предназначенное для применения в местах, где выполняются условия нормальной эксплуатации внутри помещений согласно 7.1.
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    indoor switchgear and controlgear
    switchgear and controlgear designed solely for installation within a building or other housing, where the switchgear and controlgear is protected against wind, rain, snow, abnormal dirt deposits, abnormal condensation, ice and hoar frost
    [IEV number 441-11-04]

    assembly for indoor installation
    assembly which is designed for use in locations where the normal service conditions for indoor use as specified in 7.1 are fulfilled
    [IEC 61439-1, ed. 2.0 (2011-08)]

    FR

    appareillage pour l'intérieur
    appareillage qui n'est conçu que pour être installé à l'intérieur d'un bâtiment ou d'un autre abri, dans lequel l'appareillage est protégé contre le vent, la pluie, la neige, les pollutions anormales, la condensation anormale, la glace et le givre
    [IEV number 441-11-04]

    ensemble pour installation à l'intérieur
    ensemble destiné à être utilisé dans des locaux où les conditions normales d'emploi pour l'intérieur, spécifiées en 7.1, sont satisfaites
    [IEC 61439-1, ed. 2.0 (2011-08)]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    EN

    DE

    • Innen(raum)-Schaltanlagen und/oder -Schaltgeräte

    FR

    Франко-русский словарь нормативно-технической терминологии > appareillage pour l'intérieur

  • 18 ensemble pour installation à l'intérieur

    1. НКУ внутренней установки

     

    НКУ внутренней установки
    НКУ, предназначенное для эксплуатации внутри помещений
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    НКУ для внутренней установки

    НКУ, предназначенное для применения в местах, где выполняются условия нормальной эксплуатации внутри помещений согласно 7.1.
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    indoor switchgear and controlgear
    switchgear and controlgear designed solely for installation within a building or other housing, where the switchgear and controlgear is protected against wind, rain, snow, abnormal dirt deposits, abnormal condensation, ice and hoar frost
    [IEV number 441-11-04]

    assembly for indoor installation
    assembly which is designed for use in locations where the normal service conditions for indoor use as specified in 7.1 are fulfilled
    [IEC 61439-1, ed. 2.0 (2011-08)]

    FR

    appareillage pour l'intérieur
    appareillage qui n'est conçu que pour être installé à l'intérieur d'un bâtiment ou d'un autre abri, dans lequel l'appareillage est protégé contre le vent, la pluie, la neige, les pollutions anormales, la condensation anormale, la glace et le givre
    [IEV number 441-11-04]

    ensemble pour installation à l'intérieur
    ensemble destiné à être utilisé dans des locaux où les conditions normales d'emploi pour l'intérieur, spécifiées en 7.1, sont satisfaites
    [IEC 61439-1, ed. 2.0 (2011-08)]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    EN

    DE

    • Innen(raum)-Schaltanlagen und/oder -Schaltgeräte

    FR

    Франко-русский словарь нормативно-технической терминологии > ensemble pour installation à l'intérieur

  • 19 sous enveloppe

    1. НКУ защищенное

     

    НКУ защищенное
    НКУ закрытое со всех сторон (за возможным исключением монтажной поверхности), в котором после его установки обеспечивается степень защиты не менее IP2X.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    защищенное НКУ
    НКУ, конструкция которого обеспечивает требуемую степень защиты со всех сторон от прикосновения к частям, находящимся под напряжением (за исключением монтажной поверхности).
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    enclosed assembly (of switchgear and controlgear)
    an assembly enclosed on all sides, top and bottom in such a manner as to provide a specified degree of protection
    NOTE – The mounting surface may form a part of the enclosure when specified in the relevant publication.
    [IEV number 441-12-02]

    FR

    ensemble (d'appareillage de connexion et de commande)
    sous enveloppe
    ensemble comportant une paroi sur toutes ses faces latérales, supérieure et inférieure, de façon à assurer un degré de protection spécifié
    NOTE – La surface de montage peut faire partie de l'enveloppe lorsqu'une publication particulière le spécifie.
    [IEV number 441-12-0

    0078
    Шкаф - защищенное НКУ, предназначенное для установки на полу


    Safety enclosed boards are used for most new installations. Common terms used to designate equipment of this type are metal-enclosed switchgear and metal-clad switchgear.
    Most safety enclosed boards are of the unit or sectional type. They consist of a combination of the desired number and type of standardized unit sections.
    Each section is a standard factory-assembled combination of a formed steel panel and apparatus mounted on a steel framework.


    Safety enclosed switchgear may be classified with respect to purpose of application as follows:
    1. General medium- or high-voltage switchgear
    2. Primary unit substations
    3. Rectifier unit substations
    4. Secondary unit substations or power centers
    5. General low-voltage switchgear
    6. Low-voltage distribution switchboards
    7. Motor-control-center switchboards

    [American electricians’ handbook]

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    Синонимы

    EN

    DE

    FR

    Франко-русский словарь нормативно-технической терминологии > sous enveloppe

  • 20 appareillage pour l'extérieur

    1. НКУ наружной установки

     

    НКУ наружной установки
    НКУ, предназначенное для эксплуатации вне помещений.
    [ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]

    НКУ для наружной установки
    НКУ, предназначенное для применения в местах, где выполняются условия нормальной эксплуатации вне помещений согласно 7.1.
    [ ГОСТ Р МЭК 61439.1-2013]

    EN

    outdoor switchgear and controlgear
    switchgear and controlgear suitable for installation in the open air, i.e. capable of withstanding wind, rain, snow, dirt deposits, condensation, ice and hoar frost
    [IEV number 441-11-05]

    assembly for outdoor installation
    assembly which is designed for use in locations where the normal service conditions for outdoor use as specified in 7.1 are fulfilled
    [IEC 61439-1, ed. 2.0 (2011-08)]

    FR

    appareillage pour l'extérieur
    appareillage convenant pour l'installation en plein air, c'est-à-dire capable de supporter le vent, la pluie, la neige, les pollutions, la condensation, la glace et le givre
    [IEV number 441-11-05]

    ensemble pour installation à l'extérieur
    ensemble destiné à être utilisé dans des locaux où les conditions normales d'emploi pour l'extérieur, spécifiées en 7.1, sont satisfaites
    [IEC 61439-1, ed. 2.0 (2011-08)]

    0071

    Тематики

    • НКУ (шкафы, пульты,...)

    Классификация

    >>>

    Обобщающие термины

    EN

    DE

    • Freiluft-Schaltanlagen und/oder -Schaltgeräte

    FR

    Франко-русский словарь нормативно-технической терминологии > appareillage pour l'extérieur

См. также в других словарях:

  • Assembly — may refer to:Biology* Sequence assembly * Genome assembly * Neuronal assembly and Cell assembly theoryPolitics* Deliberative assembly ** General Assembly ** House of Assembly ** Legislative Assembly ** Roman assemblies ** National Assembly **… …   Wikipedia

  • assembly — as‧sem‧bly [əˈsembli] noun assemblies PLURALFORM 1. [uncountable] MANUFACTURING the process of putting the parts of products together: • Routine assembly of colour televisions eventually shifted to Taiwan. • a car …   Financial and business terms

  • assembly — as·sem·bly n pl blies 1 a: a company of persons collected together in one place usu. for some common purpose b cap: a legislative body esp. that makes up the lower house of a legislature see also general assembly …   Law dictionary

  • Assembly — As*sem bly, n.; pl. {Assemblies}. [F. assembl[ e]e, fr. assembler. See {Assemble}.] 1. A company of persons collected together in one place, and usually for some common purpose, esp. for deliberation and legislation, for worship, or for social… …   The Collaborative International Dictionary of English

  • Assembly — (englisch für „Baugruppe“) steht für: Assembly (Demoparty), eine jährliche Veranstaltung der Demoszene in Finnland .NET Assembly, eine Zusammenstellung übersetzter .NET Programmdateien Assembly Language, englisch für Assemblersprache, eine… …   Deutsch Wikipedia

  • Assembly — Saltar a navegación, búsqueda El término assembly puede referirse a: Lenguaje ensamblador, assembly o assembly language, lenguaje de bajo nivel utilizado para escribir programas informáticos. Ensamblado o assembly, colección de archivos o… …   Wikipedia Español

  • assembly — c.1300, a gathering of persons, a group gathered for some purpose, from O.Fr. as(s)emblee assembly, gathering; union, marriage, noun use of fem. pp. of assembler to assemble (see ASSEMBLE (Cf. assemble)). Meaning gathering together is recorded… …   Etymology dictionary

  • assembly — 1 assemblage, congregation, gathering, collection (see under GATHER) Analogous words: *company, party, troop, band: *crowd, throng, crush, press 2 *assemblage Analogous words: (see those at ASSEMBLY 1) …   New Dictionary of Synonyms

  • assembly — [n1] congregation accumulation, aggregation, assemblage, association, band, body, bunch, clambake*, cluster, coffee klatch*, collection, company, conclave, confab*, conference, convocation, council, crew, crowd, faction, flock, gathering, get… …   New thesaurus

  • assembly — [ə sem′blē] n. pl. assemblies [ME assemble < OFr assemblee < assembler: see ASSEMBLE] 1. an assembling or being assembled 2. a group of persons gathered together, as for worship, instruction, or entertainment 3. a) a legislative body …   English World dictionary

  • assembly — assembly. См. сборка. (Источник: «Англо русский толковый словарь генетических терминов». Арефьев В.А., Лисовенко Л.А., Москва: Изд во ВНИРО, 1995 г.) …   Молекулярная биология и генетика. Толковый словарь.

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»