-
41 radiation environment
радиационная обстановка; облучаемая средаaquatic environment — водная среда; гидросфера
English-Russian dictionary on nuclear energy > radiation environment
-
42 surrounding environment
aquatic environment — водная среда; гидросфера
English-Russian dictionary on nuclear energy > surrounding environment
-
43 biotic environment
The English-Russian dictionary general scientific > biotic environment
-
44 non-polar environment
The English-Russian dictionary general scientific > non-polar environment
-
45 operating environment
The English-Russian dictionary general scientific > operating environment
-
46 physical environment
The English-Russian dictionary general scientific > physical environment
-
47 reference ambient air temperature
контрольная температура окружающего воздуха
Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
reference ambient air temperature
the ambient air temperature on which the time-current characteristics are based
[IEC 60898-1, ed. 1.0 (2002-01)]FR
température de référence de l'air ambiant
température de l'air ambiant sur laquelle sont basées les caractéristiques de temps-courant
[IEC 60898-1, ed. 1.0 (2002-01)]При отсутствии других указаний:
- для тепловых расцепителей значения срабатывания указывают для контрольной температуры (30±2) °С.
Рабочие характеристики расцепителей, зависящие от температуры окружающего воздуха, следует проверять при контрольной температуре (см. 4.7.3 и 5.2Ь), подавая испытательный ток во все фазные полюса расцепителя
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
Для АВО, калиброванных на контрольную температуру, отличную от (23±2) °С, испытание должно проводиться при этой температуре с допуском ±2 °С.
[ ГОСТ Р 50031-99( МЭК 60934-93)]
Номинальный ток (In)
Установленный изготовителем ток, который выключатель способен проводить в продолжительном режиме (см. 4.3.2.14) при указанной контрольной температуре окружающего воздуха.
Стандартная контрольная температура окружающего воздуха 30 °С. Если для данного выключателя используется другое контрольное значение температуры окружающего воздуха, необходимо учитывать ее влияние на защиту кабелей от перегрузки, так как согласно монтажным правилам она также основывается на контрольной температуре окружающего воздуха.
Примечание — Контрольную температуру для защиты кабелей от перегрузок принимают 25 °С по МЭК 369 [5].
[ ГОСТ Р 50345-99( МЭК 60898-95)]
Параллельные тексты EN-RUThe operating characteristic of the breaker with a thermal magnetic trip element changes as the base ambient temperature is adjusted to 40°C.
[LS Industrial Systems]Значения рабочих характеристик автоматических выключателей с теплоэлектромагнитным расцепителем зависят от температуры окружающего воздуха и отличаются от значений, указанных для контрольной температуры 40 °С.
[Перевод Интент]Rated current compensation in accordance with ambient temperature
When normal ambient temperature exceeds the temperature specified in the environment the following formula help to select the applicable current.
[LS Industrial Systems]Изменение номинального тока в зависимости от температуры окружающего воздуха
Если температура окружающего воздуха будет превышать контрольную температуру, то допустимый рабочий ток можно рассчитать по приведенной ниже формуле.
[Перевод Интент]Тематики
EN
- base ambient temperature
- normal ambient temperature
- reference ambient air temperature
- reference temperature
FR
3.2.10.2 контрольная температура (reference ambient air temperature): Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
Источник: ГОСТ Р 50345-2010: Аппаратура малогабаритная электрическая. Автоматические выключатели для защиты от сверхтоков бытового и аналогичного назначения. Часть 1. Автоматические выключатели для переменного тока оригинал документа
Англо-русский словарь нормативно-технической терминологии > reference ambient air temperature
-
48 base ambient temperature
контрольная температура окружающего воздуха
Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
reference ambient air temperature
the ambient air temperature on which the time-current characteristics are based
[IEC 60898-1, ed. 1.0 (2002-01)]FR
température de référence de l'air ambiant
température de l'air ambiant sur laquelle sont basées les caractéristiques de temps-courant
[IEC 60898-1, ed. 1.0 (2002-01)]При отсутствии других указаний:
- для тепловых расцепителей значения срабатывания указывают для контрольной температуры (30±2) °С.
Рабочие характеристики расцепителей, зависящие от температуры окружающего воздуха, следует проверять при контрольной температуре (см. 4.7.3 и 5.2Ь), подавая испытательный ток во все фазные полюса расцепителя
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
Для АВО, калиброванных на контрольную температуру, отличную от (23±2) °С, испытание должно проводиться при этой температуре с допуском ±2 °С.
[ ГОСТ Р 50031-99( МЭК 60934-93)]
Номинальный ток (In)
Установленный изготовителем ток, который выключатель способен проводить в продолжительном режиме (см. 4.3.2.14) при указанной контрольной температуре окружающего воздуха.
Стандартная контрольная температура окружающего воздуха 30 °С. Если для данного выключателя используется другое контрольное значение температуры окружающего воздуха, необходимо учитывать ее влияние на защиту кабелей от перегрузки, так как согласно монтажным правилам она также основывается на контрольной температуре окружающего воздуха.
Примечание — Контрольную температуру для защиты кабелей от перегрузок принимают 25 °С по МЭК 369 [5].
[ ГОСТ Р 50345-99( МЭК 60898-95)]
Параллельные тексты EN-RUThe operating characteristic of the breaker with a thermal magnetic trip element changes as the base ambient temperature is adjusted to 40°C.
[LS Industrial Systems]Значения рабочих характеристик автоматических выключателей с теплоэлектромагнитным расцепителем зависят от температуры окружающего воздуха и отличаются от значений, указанных для контрольной температуры 40 °С.
[Перевод Интент]Rated current compensation in accordance with ambient temperature
When normal ambient temperature exceeds the temperature specified in the environment the following formula help to select the applicable current.
[LS Industrial Systems]Изменение номинального тока в зависимости от температуры окружающего воздуха
Если температура окружающего воздуха будет превышать контрольную температуру, то допустимый рабочий ток можно рассчитать по приведенной ниже формуле.
[Перевод Интент]Тематики
EN
- base ambient temperature
- normal ambient temperature
- reference ambient air temperature
- reference temperature
FR
Англо-русский словарь нормативно-технической терминологии > base ambient temperature
-
49 normal ambient temperature
контрольная температура окружающего воздуха
Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
reference ambient air temperature
the ambient air temperature on which the time-current characteristics are based
[IEC 60898-1, ed. 1.0 (2002-01)]FR
température de référence de l'air ambiant
température de l'air ambiant sur laquelle sont basées les caractéristiques de temps-courant
[IEC 60898-1, ed. 1.0 (2002-01)]При отсутствии других указаний:
- для тепловых расцепителей значения срабатывания указывают для контрольной температуры (30±2) °С.
Рабочие характеристики расцепителей, зависящие от температуры окружающего воздуха, следует проверять при контрольной температуре (см. 4.7.3 и 5.2Ь), подавая испытательный ток во все фазные полюса расцепителя
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
Для АВО, калиброванных на контрольную температуру, отличную от (23±2) °С, испытание должно проводиться при этой температуре с допуском ±2 °С.
[ ГОСТ Р 50031-99( МЭК 60934-93)]
Номинальный ток (In)
Установленный изготовителем ток, который выключатель способен проводить в продолжительном режиме (см. 4.3.2.14) при указанной контрольной температуре окружающего воздуха.
Стандартная контрольная температура окружающего воздуха 30 °С. Если для данного выключателя используется другое контрольное значение температуры окружающего воздуха, необходимо учитывать ее влияние на защиту кабелей от перегрузки, так как согласно монтажным правилам она также основывается на контрольной температуре окружающего воздуха.
Примечание — Контрольную температуру для защиты кабелей от перегрузок принимают 25 °С по МЭК 369 [5].
[ ГОСТ Р 50345-99( МЭК 60898-95)]
Параллельные тексты EN-RUThe operating characteristic of the breaker with a thermal magnetic trip element changes as the base ambient temperature is adjusted to 40°C.
[LS Industrial Systems]Значения рабочих характеристик автоматических выключателей с теплоэлектромагнитным расцепителем зависят от температуры окружающего воздуха и отличаются от значений, указанных для контрольной температуры 40 °С.
[Перевод Интент]Rated current compensation in accordance with ambient temperature
When normal ambient temperature exceeds the temperature specified in the environment the following formula help to select the applicable current.
[LS Industrial Systems]Изменение номинального тока в зависимости от температуры окружающего воздуха
Если температура окружающего воздуха будет превышать контрольную температуру, то допустимый рабочий ток можно рассчитать по приведенной ниже формуле.
[Перевод Интент]Тематики
EN
- base ambient temperature
- normal ambient temperature
- reference ambient air temperature
- reference temperature
FR
Англо-русский словарь нормативно-технической терминологии > normal ambient temperature
-
50 compensation in accordance with ambient temperature
- изменение значения параметра в зависимости от температуры окружающего воздуха
изменение значения параметра в зависимости от температуры окружающего воздуха
Параллельные тексты EN-RU
-Rated current compensation in accordance with ambient temperature
When normal ambient temperature exceeds the temperature specified in the environment the following formula help to select the applicable current.
[LS Industrial Systems]Изменение номинального тока в зависимости от температуры окружающего воздуха
Если температура окружающего воздуха будет превышать контрольную температуру, то допустимый рабочий ток можно рассчитать по приведенной ниже формуле.
[Перевод Интент]Тематики
- электротехника, основные понятия
EN
Англо-русский словарь нормативно-технической терминологии > compensation in accordance with ambient temperature
-
51 micro-environment
микроокружающая среда
-
[IEV number 442-01-29]EN
micro-environment
the ambient conditions which immediately surround the clearance and creepage distance under consideration excluding self produced pollution resulting from normal operation of the accessory
NOTE – The micro-environment of the creepage distance or clearance and not the environment of the accessory determines the effect on the insulation. It might be better or worse than the environment of the accessory.
[IEV number 442-01-29]FR
micro-environnement
conditions ambiantes à proximité immédiate des distances d'isolement et des lignes de fuite considérées, à l'exclusion de la pollution produite par l'appareil lors de son fonctionnement normal
NOTE – C'est le micro-environnement des lignes de fuite et des distances d'isolement de l'appareil (et non l'environnement de l'appareil) qui détermine l'effet sur l'isolation. Ce micro-environnement peut être meilleur ou pire que l'environnement de l'appareil.
[IEV number 442-01-29]EN
DE
FR
3.6.7 микросреда (micro-environment): Условия среды, непосредственно окружающей изоляцию которые, в частности, влияют на величину расстояний тока утечки.
[МЭК 60664-1, пункт 1.3.12.2]
Источник: ГОСТ Р 50345-2010: Аппаратура малогабаритная электрическая. Автоматические выключатели для защиты от сверхтоков бытового и аналогичного назначения. Часть 1. Автоматические выключатели для переменного тока оригинал документа
Англо-русский словарь нормативно-технической терминологии > micro-environment
-
52 micro-environment (of a clearance or creepage distance)
микросреда (воздушного зазора или расстояния утечки)
Атмосфера вокруг данного воздушного зазора или расстояния утечки.
Примечание. Эффективность изоляции определяет микросреда расстояния утечки или воздушного зазора, а не макросреда аппарата. Эта микросреда может быть лучше или хуже макросреды аппарата. К ней относятся все факторы, влияющие на изоляцию: климатические и электромагнитные условия, образование загрязнений и т. п.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
micro-environment (of a clearance or creepage distance)
ambient conditions which surround the clearance or creepage distance under consideration
NOTE - The micro-environment of the creepage distance or clearance and not the environment of the equipment determines the effect on the insulation. The micro-environment might be better or worse than the environment of the equipment. It includes all factors influencing the insulation, such as climatic and electromagnetic conditions, generation of pollution, etc.
[IEC 60947-1, ed. 5.0 (2007-06)]FR
micro-environnement (d'une distance d'isolement ou d'une ligne de fuite)
conditions ambiantes à proximité immédiate des distances d'isolement ou des lignes de fuite considérées
NOTE - C'est le micro-environnement des lignes de fuite ou des distances d'isolement et non l'environnement du matériel qui détermine l'effet sur l'isolation. Le micro-environnement peut être meilleur ou pire que l'environnement du matériel. Il comprend tous les facteurs influant sur l'isolation, tels que conditions climatiques, influences électromagnétiques, production de pollution, etc.
[IEC 60947-1, ed. 5.0 (2007-06)]EN
FR
Англо-русский словарь нормативно-технической терминологии > micro-environment (of a clearance or creepage distance)
-
53 окружающая среда
ambient, circumambience, environment, ambient medium, mediumАнгло-русский словарь технических терминов > окружающая среда
-
54 температура окружающей среды
Англо-русский словарь технических терминов > температура окружающей среды
-
55 reference temperature
контрольная температура окружающего воздуха
Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
reference ambient air temperature
the ambient air temperature on which the time-current characteristics are based
[IEC 60898-1, ed. 1.0 (2002-01)]FR
température de référence de l'air ambiant
température de l'air ambiant sur laquelle sont basées les caractéristiques de temps-courant
[IEC 60898-1, ed. 1.0 (2002-01)]При отсутствии других указаний:
- для тепловых расцепителей значения срабатывания указывают для контрольной температуры (30±2) °С.
Рабочие характеристики расцепителей, зависящие от температуры окружающего воздуха, следует проверять при контрольной температуре (см. 4.7.3 и 5.2Ь), подавая испытательный ток во все фазные полюса расцепителя
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
Для АВО, калиброванных на контрольную температуру, отличную от (23±2) °С, испытание должно проводиться при этой температуре с допуском ±2 °С.
[ ГОСТ Р 50031-99( МЭК 60934-93)]
Номинальный ток (In)
Установленный изготовителем ток, который выключатель способен проводить в продолжительном режиме (см. 4.3.2.14) при указанной контрольной температуре окружающего воздуха.
Стандартная контрольная температура окружающего воздуха 30 °С. Если для данного выключателя используется другое контрольное значение температуры окружающего воздуха, необходимо учитывать ее влияние на защиту кабелей от перегрузки, так как согласно монтажным правилам она также основывается на контрольной температуре окружающего воздуха.
Примечание — Контрольную температуру для защиты кабелей от перегрузок принимают 25 °С по МЭК 369 [5].
[ ГОСТ Р 50345-99( МЭК 60898-95)]
Параллельные тексты EN-RUThe operating characteristic of the breaker with a thermal magnetic trip element changes as the base ambient temperature is adjusted to 40°C.
[LS Industrial Systems]Значения рабочих характеристик автоматических выключателей с теплоэлектромагнитным расцепителем зависят от температуры окружающего воздуха и отличаются от значений, указанных для контрольной температуры 40 °С.
[Перевод Интент]Rated current compensation in accordance with ambient temperature
When normal ambient temperature exceeds the temperature specified in the environment the following formula help to select the applicable current.
[LS Industrial Systems]Изменение номинального тока в зависимости от температуры окружающего воздуха
Если температура окружающего воздуха будет превышать контрольную температуру, то допустимый рабочий ток можно рассчитать по приведенной ниже формуле.
[Перевод Интент]Тематики
EN
- base ambient temperature
- normal ambient temperature
- reference ambient air temperature
- reference temperature
FR
2.2.35 опорная температура (reference temperature): Температура, при которой выполняют конкретные измерения параметров кварцевого резонатора. Для термостатированных кварцевых резонаторов опорная температура - это температура в средней точке интервала температур термостатирования. Для нетермостатированных кварцевых резонаторов опорной температурой обычно считают (25 ± 2) °С.
Источник: ГОСТ Р МЭК 60122-1-2009: Резонаторы оцениваемого качества кварцевые. Часть 1. Общие технические условия оригинал документа
Англо-русский словарь нормативно-технической терминологии > reference temperature
-
56 environmental conditions
условия окружающей среды
-
[IEV number 151-16-03]EN
ambient conditions
environmental conditions
characteristics of the environment which may affect performance of a device or system
NOTE – Examples of ambient conditions are pressure, temperature, humidity, radiation, vibration.
[IEV number 151-16-03]FR
conditions ambiantes, f, pl
caractéristiques du milieu ambiant qui peuvent influer sur le fonctionnement d'un dispositif ou d'un système
NOTE – Des exemples de conditions ambiantes sont la pression, la température, l'humidité, les rayonnements, les vibrations.
[IEV number 151-16-03]Тематики
- электротехника, основные понятия
EN
DE
FR
фациальные условия
условия окружающей среды
—
[ http://slovarionline.ru/anglo_russkiy_slovar_neftegazovoy_promyishlennosti/]Тематики
Синонимы
EN
Англо-русский словарь нормативно-технической терминологии > environmental conditions
-
57 continuous current-carrying capacity
длительная пропускная способность по току
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Англо-русский словарь нормативно-технической терминологии > continuous current-carrying capacity
-
58 ampacity (US)
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Англо-русский словарь нормативно-технической терминологии > ampacity (US)
-
59 continuous current
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
непрерывный ток
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999]Тематики
- электротехника, основные понятия
EN
Англо-русский словарь нормативно-технической терминологии > continuous current
-
60 current-carrying capacity
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
предельно допустимый ток
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
прочность печатной платы к токовой нагрузке
Свойство печатной платы сохранять электрические и механические характеристики после воздействия максимально допустимой токовой нагрузки на печатный проводник или металлизированное отверстие печатной платы.
[ ГОСТ Р 53386-2009]Тематики
EN
Англо-русский словарь нормативно-технической терминологии > current-carrying capacity
См. также в других словарях:
ambient — Surrounding, encompassing; pertaining to the environment in which an organism or apparatus functions. [L. ambiens, going around] * * * am·bi·ent am bē ənt adj surrounding on all sides <the ambient environment> <ambient air pollution>… … Medical dictionary
ambient — aplinka statusas T sritis Standartizacija ir metrologija apibrėžtis Visa, kas neįeina į nagrinėjamąją sistemą. atitikmenys: angl. ambient; environment vok. Umfeld, n; Umgebung, f; Umwelt, f rus. окружающая среда, f pranc. environnement, m … Penkiakalbis aiškinamasis metrologijos terminų žodynas
ambient — aplinka statusas T sritis fizika atitikmenys: angl. ambient; environment vok. Umgebung, f rus. окружающая среда, f pranc. environnement, m; milieu ambiant, m … Fizikos terminų žodynas
environment — aplinka statusas T sritis Standartizacija ir metrologija apibrėžtis Visa, kas neįeina į nagrinėjamąją sistemą. atitikmenys: angl. ambient; environment vok. Umfeld, n; Umgebung, f; Umwelt, f rus. окружающая среда, f pranc. environnement, m … Penkiakalbis aiškinamasis metrologijos terminų žodynas
environment — aplinka statusas T sritis fizika atitikmenys: angl. ambient; environment vok. Umgebung, f rus. окружающая среда, f pranc. environnement, m; milieu ambiant, m … Fizikos terminų žodynas
Ambient network — Ambient Networks is a network integration solution to the modern day problems of switching from one network to the other in order to keep in contact with the outside world. This project aims to develop a network software driven infrastructure… … Wikipedia
Ambient music — Stylistic origins Electronic art music Minimalist music Drone music[1] Psychedelic rock Krautrock Space rock Frippertronics Cultural origins … Wikipedia
Ambient occlusion — is a shading method used in 3D computer graphics which helps add realism to local reflection models by taking into account attenuation of light due to occlusion. Unlike local methods like Phong shading, ambient occlusion is a global method,… … Wikipedia
Environment — may refer to: * Natural environment, all living and non living things that occur naturally on Earth * Built environment, constructed surroundings that provide the setting for human activity, ranging from the large scale civic surroundings to the… … Wikipedia
Ambient desktop — Ambient is a MUI based desktop environment for MorphOS that is meant to be simple and fast. Its features include:* fully asynchronous, multi threaded design * does not use icon.library * built in old style icons support, automatic remapping *… … Wikipedia
Ambient Assisted Living — (AAL) is a technology and innovation funding programme of European countries, supported by the European Commission. The AAL program seeks to address the needs of the ageing European population by reducing innovation barriers with the goal to… … Wikipedia