-
1 преобразователь кода
преобразователь кода
-
[IEV number 314-02-12]EN
code converter
transcoder
device for changing the representation of information according to a given code into the representation of the same information according to another code
[IEV number 314-02-12]FR
transcodeur
convertisseur de code
dispositif destiné à transformer une représentation d'informations selon un certain code en une représentation des mêmes informations selon un autre code
[IEV number 314-02-12]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > преобразователь кода
-
2 рабочая наибольшая отключающая способность
рабочая наибольшая отключающая способность
Отключающая способность, для которой согласно предписанным условиям, в соответствии с установленным циклом испытаний, предполагают способность данного выключателя длительно проводить свой номинальный ток.
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
рабочая наибольшая отключающая способность
Отключающая способность, для которой предписанные условия соответственно указанному циклу испытаний предусматривают способность выключателя проводить в течение условного времени ток, равный 0,85 тока нерасцепления.
[ ГОСТ Р 50345-99( МЭК 60898-95)]
рабочая отключающая способность при коротком замыкании
-
[IEV number 442-05-50]EN
service short-circuit breaking capacity
a breaking capacity for which the prescribed conditions according to a specified test sequence include the capability of the circuit-breaker to carry its rated current continuously
[IEC 60947-2, ed. 4.0 (2006-05)]
service short-circuit breaking capacity
a breaking capacity for which the prescribed conditions according to a specified test sequence include the capability of the circuit-breaker to carry 0,85 times its non-tripping current for the conventional time
Source: see 442-05-54, 55
[IEV number 442-05-50]FR
pouvoir de coupure de service en court-circuit
pouvoir de coupure pour lequel les conditions prescrites suivant une séquence d’essais spécifiée comprennent l’aptitude du disjoncteur à être parcouru en permanence par son courant assigné
[IEC 60947-2, ed. 4.0 (2006-05)]
pouvoir de coupure de service en court-circuit
pouvoir de coupure pour lequel les conditions prescrites suivant une séquence d'essai spécifiée comprennent l'aptitude du disjoncteur à être parcouru par un courant égal à 0,85 fois son courant de non-déclenchement pendant le temps conventionnel
Source: voir 442-05-54, 55
[IEV number 442-05-50]
Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
- выключатель, переключатель
Синонимы
ПримечаниеТермин по МЭС 442-05-50EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > рабочая наибольшая отключающая способность
-
3 ремонт по техническому состоянию
- Réparation d´après la condition technique
- réparation d'aprés la condition technique
ремонт по техническому состоянию
Ремонт, при котором контроль технического состояния выполняется с периодичностью и в объеме, установленными в нормативно-технической документации, а объем и момент начала ремонта определяется техническим состоянием изделия
Примечание
Термины видов ремонтов по признакам применяемых методов следует образовывать в соответствии с терминами методов ремонта, например, «Поточный ремонт», «Обезличенный ремонт» и т. д.
[ ГОСТ 18322-78]
[ ГОСТ 24166-80]
ремонт по техническому состоянию
Ремонт, при котором контроль технического состояния выполняется с периодичностью и в объеме, установленными в нормативной документации, а объем и момент начала ремонта определяется техническим состоянием изделия.
С учетом ГОСТ 18322-78.
[СТО Газпром РД 2.5-141-2005]Тематики
- газораспределение
- ремонт судов
- система техн. обслуж. и ремонта техники
Обобщающие термины
EN
DE
FR
18. Ремонт по техническому состоянию
D. Reparatur nach technische Zustand
E. Repair according to technical condition
F. Réparation d´après la condition technique
Источник: ГОСТ 24166-80: Система технического обслуживания и ремонта судов. Ремонт судов. Термины и определения оригинал документа
Русско-французский словарь нормативно-технической терминологии > ремонт по техническому состоянию
-
4 тип энергии
тип энергии
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
energy type
According to the source, energy can be classified as hydroenergy, solar energy, tidal energy, wind energy, waves energy, geothermal energy, etc. According to the type of fuel used for its production, energy can be classified as nuclear energy, coal derived energy, petroleum derived energy, biomass derived energy, etc. (Source: RRDA)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > тип энергии
-
5 степень защиты (обеспечиваемая оболочкой)
степень защиты
Способ защиты, обеспечиваемый оболочкой от доступа к опасным частям, попадания внешних твердых предметов и (или) воды и проверяемый стандартными методами испытаний.
[ ГОСТ 14254-96( МЭК 529-89)]
степень защиты, обеспечиваемая оболочкой (IP)
Числовые обозначения после кода IP, которые в соответствии с МЭК 60529 [12] характеризуют оболочку электрооборудования, обеспечивающую:
- защиту персонала от прикасания или доступа к находящимся под напряжением или движущимся частям (за исключением гладких вращающихся валов и т.п.), расположенным внутри оболочки;
- защиту электрооборудования от проникания в него твердых посторонних тел и,
- если указано в обозначении, защиту электрооборудования от вредного проникания воды.
[ ГОСТ Р МЭК 60050-426-2006]EN
degree of protection of enclosure
IP (abbreviation)
numerical classification according to IEC 60529 preceded by the symbol IP applied to the enclosure of electrical apparatus to provide:
– protection of persons against contact with, or approach to, live parts and against contact with moving parts (other than smooth rotating shafts and the like) inside the enclosure,
– protection of the electrical apparatus against ingress of solid foreign objects, and
– where indicated by the classification, protection of the electrical apparatus against harmful ingress of water
[IEV number 426-04-02 ]FR
degré de protection procuré par une enveloppe
IP (abréviation)
classification numérique selon la CEI 60529, précédée du symbole IP, appliquée à une enveloppe de matériel électrique pour apporter:
– une protection des personnes contre tout contact ou proximité avec des parties actives et contre tout contact avec une pièce mobile (autre que les roulements en faible rotation) à l'intérieur d'une enveloppe
– une protection du matériel électrique contre la pénétration de corps solide étrangers, et
– selon l’indication donnée par la classification, une protection du matériel électrique contre la pénétration dangereuse de l’eau
[IEV number 426-04-02 ]Элементы кода IP и их обозначения по ГОСТ 14254-96( МЭК 529-89)
Цифры кода IP
Значение для защиты оборудования от проникновения внешних твердых предметов
Значение для защиты людей от доступа к опасным частям
Первая характеристическая цифра
0
Нет защиты
Нет защиты
1
диаметром ≥ 50 мм
тыльной стороной руки
2
диаметром ≥ 12,5 мм
пальцем
3
диаметром ≥ 2,5 мм
инструментом
4
диаметром ≥ 1,0 мм
проволокой
5
пылезащищенное
проволокой
6
пыленепроницаемое
проволокой
От вредного воздействия в результате проникновения воды
Вторая характеристическая цифра
0
Нет защиты
-
1
Вертикальное каплепадение
2
Каплепадение (номинальный угол 15°)
3
Дождевание
4
Сплошное обрызгивание
5
Действие струи
6
Сильное действие струи
7
Временное непродолжительное погружение
8
Длительное погружение
Дополнительная буква (при необходимости)
-
От доступа к опасным частям
A
тыльной стороной руки
B
пальцем
C
инструментом
проволокой
Вспомогательная буква (при необходимости)
Вспомогательная информация относящаяся к:
-
H
высоковольтным аппаратам
M
состоянию движения во время испытаний защиты от воды
S
состоянию неподвижности во время испытаний защиты от воды
W
Требования в части стойкости оболочек и электрооборудования в целом к климатическим, механическим внешним воздействующим факторам (ВВФ) и специальным средам (кроме проникновения внешних твердых предметов и воды) установлены вне рамок настоящего стандарта.
Параллельные тексты EN-RU
The code IP indicates the degrees of protection provided by an enclosure against access to hazardous parts, ingress of solid foreign objects and ingress of water.
The degree of protection of an enclosure is identified, in compliance with the specifications of the Standard IEC 60529, by the code letters IP (International Protection) followed by two numerals and two additional letters.
The first characteristic numeral indicates the degree of protection against ingress of solid foreign objects and against contact of persons with hazardous live parts inside the enclosure.
The second characteristic numeral indicates the degree of protection against ingress of water with harmful effects.
[ABB]Код IP обозначает степень защиты, обеспечиваемую оболочкой от попадания внутрь твердых посторонних предметов и воды.
Степень защиты оболочки обозначается в соответствии со стандартом МЭК 60529 буквенным обозначением IP (International Protection, т. е. Международная защита) после которого следуют две цифры, к которым в некоторых случаях добавляются еще две буквы.
Первая характеристическая цифра обозначает степень защиты от проникновения твердых посторонних предметов и от контакта людей с находящимися внутри оболочки опасными токоведущими частями.
Вторая характеристическая цифра обозначает степень защиты оболочки с точки зрения вредного воздействия, оказываемого проникновением воды.
[Перевод Интент]The protection of enclosures against ingress of dirt or against the ingress of water is defined in IEC529 (BSEN60529:1991). Conversely, an enclosure which protects equipment against ingress of particles will also protect a person from potential hazards within that enclosure, and this degree of protection is also defined as a standard.
The degrees of protection are most commonly expressed as ‘IP’ followed by two numbers, e.g. IP65, where the numbers define the degree of protection. The first digit shows the extent to which the equipment is protected against particles, or to which persons are protected from enclosed hazards. The second digit indicates the extent of protection against water.
The wording in the table is not exactly as used in the standards document, but the dimensions are accurateIP Degree of Protection according to EN/IEC 60529
Correlations between IP (IEC) and NEMA 250 standards
IP10 -> NEMA 1
IP11 -> NEMA 2
IP54 -> NEMA 3 R
IP52 -> NEMA 5-12-12 K
IP54 -> NEMA 3-3 S
IP56 -> NEMA 4-4 X
IP67 -> NEMA 6-6 P[ http://electrical-engineering-portal.com/ip-protection-degree-iec-60529-explained]
Тематики
- безопасность машин и труда в целом
- электробезопасность
- электротехника, основные понятия
Действия
- степень защиты
- степень защиты, обеспечиваемая оболочкой
- степень защиты, обеспечиваемая оболочкой (код IP)
EN
- amount of protection
- degree of protection IP
- degree of protection of an enclosure
- degree of protection of enclosure
- degree of protection provided by enclosure
- enclosure rating
- ingress protection rating
- IP
- IP degree of protection,
- IP rating
- IP Sealing Specification
- IP security
- IPSec
- level of protection
- mechanical rating
- protection
- protection index
- protection rating
DE
- IP-Schutzgrad, m
- Schutzart des Gehäuses, f
FR
Русско-французский словарь нормативно-технической терминологии > степень защиты (обеспечиваемая оболочкой)
-
6 амплитудная модуляция
амплитудная модуляция
-
[IEV number 314-08-01]EN
amplitude modulation
process by which the amplitude of a periodic carrier wave is varied according to a specified law
NOTE – The result of this process is an amplitude modulated signal.
Source: 702-06-17 MOD
[IEV number 314-08-01]FR
modulation d'amplitude
opération par laquelle l'amplitude d'une onde porteuse périodique varie selon une loi spécifiée
NOTE – Le résultat de cette opération est un signal modulé en amplitude.
Source: 702-06-17 MOD
[IEV number 314-08-01]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > амплитудная модуляция
-
7 аттенюатор
аттенюатор
Схема, обеспечивающая уменьшение амплитуды электрического сигнала без значительных фазовых или частотных искажений.
[ http://www.vidimost.com/glossary.html]
аттенюатор
-
[IEV number 313-09-13]EN
attenuator
device for reducing the value of an electrical quantity according to a determined ratio
[IEV number 313-09-13]FR
atténuateur
dispositif réduisant la valeur d'une grandeur électrique dans un rapport déterminé
[IEV number 313-09-13]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > аттенюатор
-
8 время срабатывания электрического реле
- tеmрs d'action pour relais de tout ou rien
- Temps de fonctionnement;
- temps de fonctionnement
время срабатывания электрического реле
Время от момента, когда входная воздействующая или характеристическая величина электрического реле, находящегося в начальном или исходном состоянии, принимает в заданных условиях определенное значение до момента, когда реле завершает срабатывание
[ ГОСТ 16022-83]EN
operate time
for a relay which is in the release condition (initial condition) the time interval between the instant a specified value of the input energizing quantity (characteristic quantity) is applied under specified condition and the instant when the relay switches
NOTE – This term is used only when the relay has output circuits of the same type and no precision is required according to contact time difference.
[IEV number 446-17-09]FR
temps de fonctionnement
temps d'action (terme déconseillé, utilisé pour les relais de tout ou rien)
pour un relais qui est dans l'état de repos ou dans un état initial, temps écoulé entre l'instant où la grandeur d'alimentation d'entrée ou la grandeur caractéristique prend, dans des conditions spécifiées, une valeur définie et l'instant où le relais commute
NOTE – Ce terme n'est utilisé que lorsque le relais ne comporte que des circuits de sortie de même nature et qu'aucune précision n'est nécessaire quant à la dispersion des temps de contact.
[IEV number 446-17-09]Тематики
EN
DE
FR
122. Время срабатывания электрического реле
D. Betätigungszeit
E. Operate time
F. Temps de fonctionnement;
Temps d’action (pour relais de tout ou rien)
Время от момента, когда входная воздействующая или характеристическая величина электрического реле, находящегося в начальном или исходном состоянии, принимает в заданных условиях определенное значение до момента, когда реле завершает срабатывание
Источник: ГОСТ 16022-83: Реле электрические. Термины и определения оригинал документа
Русско-французский словарь нормативно-технической терминологии > время срабатывания электрического реле
-
9 входное полное сопротивление
входное полное сопротивление
-
[IEV number 312-06-18]EN
input impedance
impedance of the input circuit measured between the input terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the input circuit is such that the instantaneous value of the current flowing into the input terminals is a non-linear function of the instantaneous value of the input voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual input circuit, is sometimes called the "equivalent input impedance".
[IEV number 312-06-18]FR
impédance du circuit d'entrée
impédance du circuit d'entrée entre les bornes d'entrée dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit d'entrée est tel que la valeur instantanée du courant traversant les bornes d'entrée est une fonction non linéaire de la valeur instantanée de la tension d'entrée dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit d'entrée réel, est parfois appelée "impédance équivalente d'entrée".
[IEV number 312-06-18]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > входное полное сопротивление
-
10 выключатель с минимальным зазором
выключатель с минимальным зазором
-
[IEV number 442-04-03]EN
switch of micro-gap construction
a switch with a contact separation according to micro-disconnection
[IEV number 442-04-03]FR
interrupteur à faible distance d'ouverture des contacts
interrupteur dont la séparation des contacts est faite selon les dispositions de la micro-coupure de circuit
[IEV number 442-04-03]Тематики
- выключатель, переключатель
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > выключатель с минимальным зазором
-
11 выходное полное сопротивление
выходное полное сопротивление
-
[IEV number 312-06-19]EN
output impedance
impedance of the output circuit measured between the output terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the output circuit is such that the instantaneous value of the current flowing into the output terminals is a non-linear function of the instantaneous value of the output voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual output circuit, is sometimes called the "equivalent output impedance".
[IEV number 312-06-19]FR
impédance du circuit de sortie
impédance du circuit de sortie entre les bornes de sortie dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit de sortie est tel que la valeur instantanée du courant traversant les bornes de sortie est une fonction non linéaire de la valeur instantanée de la tension de sortie dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit de sortie réel, est parfois appelée "impédance équivalente de sortie".
[IEV number 312-06-19]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > выходное полное сопротивление
-
12 генератор развертки
генератор развертки
Узел электронного блока, формирующий сигналы горизонтальной или вертикалькой развертки для получения на дисплее (экране) изображения электрических сигналов (обычно импульсных).
[Система неразрушающего контроля. Виды (методы) и технология неразрушающего контроля. Термины и определения (справочное пособие). Москва 2003 г.]
генератор развертки
-
[IEV number 314-06-02]EN
time base
device used to produce a spot displacement according to a specified function of time
[IEV number 314-06-02]FR
base de temps
dispositif utilisé pour obtenir un déplacement du spot selon une fonction spécifiée du temps
[IEV number 314-06-02]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > генератор развертки
-
13 градуировка шкалы
градуировка шкалы
-
[IEV number 314-01-04]EN
scale marking
series of marks or other signs distributed on a scale according to an appropriate law
[IEV number 314-01-04]FR
graduation
série de traits ou autres signes répartis sur une échelle selon une loi appropriée
[IEV number 314-01-04]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > градуировка шкалы
-
14 графство
графство
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
county
An area comprising more than one city and whose boundaries have been designed according to some biological, political, administrative, economic, demographic criteria. (Source: LANDYa)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > графство
-
15 Европейская Комиссия
Европейская Комиссия
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
European Commission
The European Union's administrative body, composed of twenty independent members appointed by the Member States for five-year terms and vested with powers of initiative, implementation, management and control according to the mandates established in EU Treaties or handed down by the EU Council. (Source: EUR)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > Европейская Комиссия
-
16 Европейский Союз
Европейский Союз
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
European Union
The 15 nations (Belgium, Denmark, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, the UK, Austria, Finland and Sweden) that have joined together to form an economic community with common monetary, political and social aspirations. The EU came into being on 1 November 1993 according to the terms of the Maastricht Treaty; it comprises the three European Communities, extended by the adoption of a common foreign and security policy which requires cooperation between member states in foreign policy and security and cooperation in justice and home affairs. (Source: DICLAW)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > Европейский Союз
-
17 запираемый контактор
запираемый контактор
Контактор, в котором запирающее приспособление не позволяет подвижным элементам вернуться в положение покоя, когда прекращается воздействие на механизм управления.
Примечания
1 Запор защелки и его расцепитель могут быть механическими, пневматическими и т. п.
2 Благодаря запору контактор фактически приобретает второе положение покоя и, в полном смысле этого определения, к контакторам не относится. Однако согласно области применения к конструкции запираемый контактор более соответствует контакторам вообще, чем любым другим коммутационным аппаратам, поэтому считают, что он удовлетворяет (когда уместно) требованиям к контакторам.
(МЭС 441-14-34)
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
latched contactor
a contactor, the moving elements of which are prevented by means of a latching arrangement from returning to the position of rest when the operating means are de-energized
NOTE 1 – The latching, and the release of the latching, may be mechanical, electromagnetic, pneumatic, etc.
NOTE 2 – Because of the latching, the latched contactor actually acquires a second position of rest and, according to the definition of a contactor it is not, strictly speaking, a contactor. However, since the latched contactor in both its utilization and its design is more closely related to contactors in general than to any other classification of switching device, it is considered proper to require that it complies with the specifications for contactors wherever they are appropriate.
[IEV number 441-14-34]FR
contacteur à accrochage
contacteur muni d'un dispositif d'accrochage empêchant ses éléments mobiles de retourner à leur position de repos quand on cesse d'actionner le dispositif de commande
NOTE 1 – L'accrochage et le déclencheur d'accrochage peuvent être mécaniques, électromagnétiques, pneumatiques, etc.
NOTE 2 – Du fait de son accrochage, le contacteur à accrochage possède en fait une seconde position de repos et, d'après la définition du contacteur il n'est pas à proprement parler un contacteur. Cependant, étant donné que le contacteur à accrochage, tant par son utilisation que par sa conception, se rapproche davantage d'un contacteur en général que de toute autre sorte d'appareil de connexion, on admet qu'il réponde aux spécifications des contacteurs dans la mesure du possible.
[IEV number 441-14-34]Тематики
- аппарат, изделие, устройство...
- контакторы и пускатели
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > запираемый контактор
-
18 защищенный пускатель
защищенный пускатель
Комбинация пускателя, коммутационного аппарата с ручным управлением и аппарата защиты от коротких замыканий в оболочке или без нее, смонтированных и соединенных по инструкции изготовителя.
Примечание. Коммутационный аппарат с ручным управлением и аппарат защиты от коротких замыканий могут представлять собой единый аппарат и оснащаться дополнительно защитой от перегрузок.
[ ГОСТ Р 50030.4.1-2002 (МЭК 60947-4-1-2000)]EN
protected starter
equipment consisting of a starter, a manually-operated switching device and a short-circuit protective device, rated as a unit by the manufacturer
NOTE 1 - The protected starter may or may not be enclosed.
NOTE 2 - In the context of this standard, the term “manufacturer“ means any person, company or organization with ultimate responsibility as follows:
– to verify compliance with the appropriate standard;
– to provide the product information according to Clause 6.
NOTE 3 - The manually operated switching device and the short-circuit protective device may be just one device and may also incorporate the starter overload protection.
[IEC 60947-4-1, ed. 3.0 (2009-09)]FR
démarreur protégé
matériel comprenant un démarreur, un appareil de connexion à commande manuelle et un dispositif de protection contre les courts-circuits, caractérisé comme une unité par le fabricant
NOTE 1 - Le démarreur protégé peut ou non être sous enveloppe.
NOTE 2 - Dans le contexte de la présente norme, le terme «fabricant» signifie toute personne, entreprise ou organisation ayant la responsabilité ultime:
– de vérifier la conformité avec la norme appropriée;
– de fournir l’information sur le matériel selon l’Article 6.
NOTE 3 - L'appareil de connexion à commande manuelle et le dispositif de protection contre les courts-circuits peuvent être seulement un appareil et peuvent également incorporer la protection contre les surcharges du démarreur.
[IEC 60947-4-1, ed. 3.0 (2009-09)]Тематики
- аппарат, изделие, устройство...
- контакторы и пускатели
EN
FR
Русско-французский словарь нормативно-технической терминологии > защищенный пускатель
-
19 изготовитель НКУ
изготовитель НКУ
Организация, которая выполнила разработку конструкции, изготовление и необходимую проверку на соответствие НКУ требованиям конкретного стандарта.
[ ГОСТ Р МЭК 61439-1-2013]EN
original manufacturer
organization that has carried out the original design and the associated verification of an assembly in accordance with the relevant assembly standard
[IEC 61439-1, ed. 2.0 (2011-08)]FR
constructeur d'origine
organisme qui a réalisé la conception d'origine et la vérification associée d’un ensemble conformément à la norme d’ensembles applicable
[IEC 61439-1, ed. 2.0 (2011-08)]Параллельные тексты EN-RU
6.1 ASSEMBLY designation marking
The ASSEMBLY manufacturer shall provide each ASSEMBLY with one or more labels, marked in a durable manner and located in a place such that they are visible and legible when the ASSEMBLY is installed and in operation.
Compliance is checked according to the test of 10.2.7 and by inspection.
The following information regarding the ASSEMBLY shall be provided on the designation label(s):
a) ASSEMBLY manufacturer's name or trade mark (see 3.10.2);
b) type designation or identification number or any other means of identification, making it possible to obtain relevant information from the ASSEMBLY manufacturer;
c) means of identifying date of manufacture;
d) IEC 61439-X (the specific part “X” shall be identified).
NOTE The relevant ASSEMBLY standard may specify where additional information is to be provided on the designation label.
[BS EN 61439-1:2009]6.1 Маркировка
Изготовитель НКУ должен предусмотреть на каждом НКУ одну или несколько табличек со стойкой к внешним воздействиям маркировкой, которые после установки и в процессе эксплуатации НКУ должны быть расположены на видном месте.
Соответствие проверяют испытанием по 10.2.7 и внешним осмотром.
На паспортной табличке должна быть приведена информация об НКУ, указанная в перечислениях а) — d):
a) наименование изготовителя или его товарный знак (см. 3.10.2):
b) обозначение типа, идентификационный или другой знак, позволяющий получить необходимую информацию от изготовителя;
c) обозначение даты изготовления;
d) обозначение настоящего стандарта.
Примечание — На паспортной табличке может быть приведено обозначение конкретного стандарта на НКУ, если требуется дополнительная информация.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
Синонимы
EN
- assembly manufacturer
- ASSEMBLY manufacturer
- original equipment manufacturer
- original manufacturer
- panel builder
- panel-builder
- switchboard manufacturer
FR
Русско-французский словарь нормативно-технической терминологии > изготовитель НКУ
-
20 измерительный преобразователь (с электрическим выходом)
измерительный преобразователь (с электрическим выходом)
-
[IEV number 312-02-15]EN
measuring transducer (with electrical output)
device intended to transform, with a specified accuracy and according to a given law, the measurand, or a quantity already transformed therefrom, into an electrical quantity
NOTE 1 – If the input quantity is electrical, the input and output quantities may not be of the same kind, for example, a voltage and a current.
NOTE 2 – In certain instances, measuring transducers also have a specific name in respect of their function, (for example, amplifier, converter, transformer, frequency transducer, etc.).
Source: ≈ VIM 4.3
[IEV number 312-02-15]FR
transducteur de mesure (à sortie électrique)
dispositif destiné à transformer, avec une précision spécifiée et suivant une loi déterminée, le mesurande, ou la grandeur déjà transformée à partir du mesurande, en une grandeur électrique
NOTE 1 – Si la grandeur d'entrée est électrique, les grandeurs d'entrée et de sortie peuvent ne pas être de même nature, par exemple une tension et un courant.
NOTE 2 – Dans certains cas, les transducteurs de mesure ont également compte tenu de leur fonction, une dénomination spécifique, (par exemple, amplificateur, convertisseur, transformateur, transducteur de fréquence, etc.).
Source: ≈ VIM 4.3
[IEV number 312-02-15]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > измерительный преобразователь (с электрическим выходом)
См. также в других словарях:
According — Ac*cord ing, p. a. Agreeing; in agreement or harmony; harmonious. This according voice of national wisdom. Burke. Mind and soul according well. Tennyson. [1913 Webster] According to him, every person was to be bought. Macaulay. [1913 Webster] Our … The Collaborative International Dictionary of English
According as — According Ac*cord ing, p. a. Agreeing; in agreement or harmony; harmonious. This according voice of national wisdom. Burke. Mind and soul according well. Tennyson. [1913 Webster] According to him, every person was to be bought. Macaulay. [1913… … The Collaborative International Dictionary of English
according — 1. according as. This is now well established as a subordinating conjunction meaning ‘depending on whether, to the extent to which’, despite Fowler s long warning (1926) against its use: e.g. • Llanaba Castle presents two quite different aspects … Modern English usage
according to — W1S2 prep 1.) as shown by something or stated by someone ▪ According to the police, his attackers beat him with a blunt instrument. ▪ There is now widespread support for these proposals, according to a recent public opinion poll. 2.) in a way… … Dictionary of contemporary English
according to — UK US preposition ► used for saying which person, group, piece of information, etc. provides a particular fact: »According to a company spokesman, the firm is expected to have sales of more than $3.5 billion this year. according to… … Financial and business terms
according — ► ADVERB 1) (according to) as stated by or in. 2) (according to) corresponding or in proportion to. 3) (according as) depending on whether … English terms dictionary
according — [ə kôr′diŋ] adj. agreeing; in harmony according as 1. to the degree that; in proportion as 2. depending on whether; if according to 1. in agreement with 2. in the order of [arranged according to size] … English World dictionary
according — c.1300, matching, similar, correponding, prp. adjective and adverb from ACCORD (Cf. accord) (v.). Meanings conforming (to), compliant, in agreement; consistent, harmonious; suitable, appropriate are from late 14c. According to referring to, lit.… … Etymology dictionary
According — Ac*cord ing, adv. Accordingly; correspondingly. [Obs.] Shak. [1913 Webster] … The Collaborative International Dictionary of English
according to — index pursuant to Burton s Legal Thesaurus. William C. Burton. 2006 … Law dictionary
according to — ♦ 1) PHR PREP If someone says that something is true according to a particular person, book, or other source of information, they are indicating where they got their information. Philip stayed at the hotel, according to Mr Hemming... He and his… … English dictionary