-
1 цепь тока
цепь тока
-
[IEV number 312-01-01]
цепь тока
обмотка вращающего элемента и внутренние соединения счетчика, предназначенные для прохождения тока цепи, к которой присоединен счетчик.
Примечание - Если счетчик снабжен встроенным трансформатором тока, цепь тока включает в себя также обмотки этого трансформатора.
[ ГОСТ 6570-96]EN
current circuit
circuit of a measuring instrument in which the current is equal or proportional to the current of the circuit to which the measuring instrument is connected
NOTE – This current can be:
– the current directly involved in the measurement,
– a proportional current supplied by an external current transformer,
– derived from an external shunt.
[IEV number 312-01-01]FR
circuit de courant
circuit d'un appareil de mesure dans lequel le courant est égal ou proportionnel au courant du circuit auquel l'appareil de mesure est raccordé
NOTE – Ce courant peut être:
– le courant directement mis en jeu dans la mesure,
– un courant proportionnel fourni par un transformateur de courant externe,
– prélevé sur un shunt externe.
[IEV number 312-01-01]Тематики
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > цепь тока
-
2 переносная розетка
переносная розетка
Розетка, предназначенная для соединения с гибким кабелем или шнуром или являющаяся частью гибкого кабеля или шнура,присоединив которую к сети можно легко перемещать с одного места на другоекоторую можно присоединить к стационарной сети и легко перемещать с одного места на другое.
[ ГОСТ Р 51322.1-99]EN
portable socket-outlet
a socket-outlet intended to be connected to, or integral with, flexible cables or cords, and which can easily be moved from one place to another while connected to the supply
[IEV number 442-03-07]FR
socle mobile de prise de courant
socle de prise de courant prévu pour être relié à, ou être intégré à, des câbles souples et qui peut être facilement déplacé lorsqu'il est relié au circuit d'alimentation
[IEV number 442-03-07]
1 - Розетка;
2 - Угловая вилка;
3 - Перносная розеткаТематики
Синонимы
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > переносная розетка
-
3 ожидаемый ток
ожидаемый ток
Ток, который будет в цепи, если коммутационный аппарат зашунтироватъ проводником с пренебрежимо малым сопротивлением.
[ ГОСТ 17703-72]EN
prospective current
the current that would flow in the circuit, if each main current path of the switching device and of the overcurrent protective device, if any, were replaced by a conductor of negligible impedance
NOTE – The prospective current can be qualified in the same manner as an actual current, for example: prospective breaking current, prospective peak current, prospective residual current, etc.
[IEV number 442-01-47]FR
courant présumé
courant qui circulerait dans le circuit, si chaque voie principale de courant du dispositif de coupure et du dispositif éventuel de protection contre les surintensités était remplacée par un conducteur d'impédance négligeable
NOTE – Le courant présumé peut être qualifié de la même façon qu'un courant réel, par exemple courant de coupure présumé, courant de crête présumé, courant différentiel présumé, etc.
[IEV number 442-01-47]Тематики
- аппарат, изделие, устройство...
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > ожидаемый ток
-
4 токоограничивающий автоматический выключатель
токоограничивающий автоматический выключатель
Выключатель с чрезвычайно малым временем отключения, в течение которого ток короткого замыкания не успевает достичь своего максимального значения.
[МЭК 60947-1]En
current-limiting circuit breaker
Circuit-breaker with a break-time short enough to prevent the short-circuit current reaching its otherwise attainable peak value.
[< size="2">IEC 60077-3, ed. 1.0 (2001-12)]
Circuit-breaker that, within a specified range of current, prevents the let-through current reaching the prospective peak value and which limits the let-through energy (I2t) to a value less than the let-through energy of a half-cycle wave of the symmetrical prospective current
NOTE 1 - Reference may be made to either the symmetrical or asymmetrical prospective peak value of let-through current.
NOTE 2 - The let-through current is also referred to as the cut-off current (see IEV 441-17-12).
NOTE 3 - Templates for the graphical representation of the cut-off current characteristic and the let-through energy characteristic are given in Figures K.2 to K.5 and examples of the use of the templates in Figures K.6 and K.7.
[IEC 60947-2, ed. 4.0, amd. 1 (2009-01)]Fr
disjoncteur limiteur de courant
Disjoncteur dont la durée de coupure est particulièrement brève en vue d’obtenir que le courant de court-circuit ne puisse atteindre son amplitude maximale
[< size="2">IEC 60077-3, ed. 1.0 (2001-12)]
Disjoncteur qui, à l'intérieur d'un domaine de courant spécifié, empêche le courant coupé limité d'atteindre la valeur crête présumée et qui limite l'énergie limitée (I2t) à une valeur inférieure à l'énergie limitée d'une demi-période du courant présumé symétrique
NOTE 1 Il peut être fait référence à la valeur crête présumée symétrique ou assymétrique du courant coupé limité.
NOTE 2 Le courant coupé limité (let-through current) est aussi nommé "cut-off current" (voir VEI 441-17-12).
NOTE 3 Les modèles de représentation graphique des caractéristiques de courant coupé limité et d'énergie limitée sont illustrés dans les Figures K.2 à K.5 et les exemples d'utilisation des modèles dans les Figures K.6 et K.7.
[IEC 60947-2, ed. 4.0, amd. 1 (2009-01)]Токоограничивающий автоматический выключатель имеет чрезвычайно малое время отключения, в течение которого ток КЗ не успевает достичь максимального значения.
Токоограничивающие автоматические выключатели ограничивают ток КЗ с помощью быстрого введения в цепь дополнительного сопротивления электрической дуги (в первый же полупериод, до того, как ток КЗ значительно возрастет) и последующего быстрого отключения КЗ, при этом ток КЗ не достигает ожидаемого расчетного максимального значения. Токоограничение начинается с некоторого значения тока, определяемого характеристикой токоогранияения.
В токоограничивающих автоматических выключателях при больших ожидаемых токах КЗ контакты, сразу же отбрасываются электродинамическими силами, вводя в цепь сопротивление дуги, и затем уже не соприкасаются, так как своевременно срабатывает электромагнитный расцепитель.
При малых токах КЗ контакты не отбрасываются, а отключение производится электромагнитным расцепителем.
[А.В.Беляев. Выбор аппаратуры, защит и кабелей в сетях 0,4 кВ. - Л.: Энергоатомиздат. 1988.]Тематики
Классификация
>>>Обобщающие термины
EN
- current limiting circuitbreaker
- current-limiting circuit breaker
- current-limiting circuit-breaker
- limiting circuit breaker
- limiting circuit-breaker
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > токоограничивающий автоматический выключатель
-
5 рабочая наибольшая отключающая способность
рабочая наибольшая отключающая способность
Отключающая способность, для которой согласно предписанным условиям, в соответствии с установленным циклом испытаний, предполагают способность данного выключателя длительно проводить свой номинальный ток.
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
рабочая наибольшая отключающая способность
Отключающая способность, для которой предписанные условия соответственно указанному циклу испытаний предусматривают способность выключателя проводить в течение условного времени ток, равный 0,85 тока нерасцепления.
[ ГОСТ Р 50345-99( МЭК 60898-95)]
рабочая отключающая способность при коротком замыкании
-
[IEV number 442-05-50]EN
service short-circuit breaking capacity
a breaking capacity for which the prescribed conditions according to a specified test sequence include the capability of the circuit-breaker to carry its rated current continuously
[IEC 60947-2, ed. 4.0 (2006-05)]
service short-circuit breaking capacity
a breaking capacity for which the prescribed conditions according to a specified test sequence include the capability of the circuit-breaker to carry 0,85 times its non-tripping current for the conventional time
Source: see 442-05-54, 55
[IEV number 442-05-50]FR
pouvoir de coupure de service en court-circuit
pouvoir de coupure pour lequel les conditions prescrites suivant une séquence d’essais spécifiée comprennent l’aptitude du disjoncteur à être parcouru en permanence par son courant assigné
[IEC 60947-2, ed. 4.0 (2006-05)]
pouvoir de coupure de service en court-circuit
pouvoir de coupure pour lequel les conditions prescrites suivant une séquence d'essai spécifiée comprennent l'aptitude du disjoncteur à être parcouru par un courant égal à 0,85 fois son courant de non-déclenchement pendant le temps conventionnel
Source: voir 442-05-54, 55
[IEV number 442-05-50]
Тематики
- аппарат, изделие, устройство...
- выключатель автоматический
- выключатель, переключатель
Синонимы
ПримечаниеТермин по МЭС 442-05-50EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > рабочая наибольшая отключающая способность
-
6 розетка для приборов
розетка для приборов
Розетка, предназначенная для встраивания в прибор.
[ ГОСТ Р 51322.1-99]
розетка для приборов
-
[IEV number 442-03-09]EN
socket-outlet for appliances
a socket-outlet intended to be integrated or incorporated in appliance or intended to be fixed to it
[IEV number 442-03-09]FR
socle de prise de courant pour appareils d'utilisation
socle de prise de courant prévu pour être intégré ou incorporé dans un appareil d'utilisation ou destiné à y être fixé
[IEV number 442-03-09]Тематики
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > розетка для приборов
-
7 устройство дифференциального тока
устройство дифференциального тока
УДТ
Механическое коммутационное устройство, предназначенное включать, проводить и отключать токи в нормальных рабочих условиях и вызывать размыкание контактов, когда дифференциальный ток достигает заданного значения в определенных условиях.
Примечание - Устройство дифференциального тока может быть комбинацией различных отдельных элементов, предназначенных обнаруживать и оценивать дифференциальный ток, а также включать и отключать электрический ток.
Примечание - В национальной нормативной документации вместо термина «устройство дифференциального тока» применяют термин « устройство защитного отключения».
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]
устройство дифференциального тока
УДТ
Механическое коммутационное устройство или комплекс устройств, которые вызывают размыкание контактов, когда дифференциальный или несбалансированный ток достигнет заданного значения в заданных условиях.
[ ГОСТ Р 51992-2011( МЭК 61643-1: 2005)]EN
residual current device
RCD, (abbreviation)
a mechanical switching device designed to make, carry and break currents under normal service conditions and to cause the opening of the contacts when the residual current attains a given value under specified conditions
NOTE – A residual current device can be a combination of various separate elements designed to detect and evaluate the residual current and to make and break current.
[IEV number 442-05-02]FR
dispositif (de coupure) différentiel
dispositif (à courant) différentiel résiduel
DDR (abréviation)
dispositif mécanique de coupure destiné à établir, supporter et couper des courants dans les conditions de service normales et à provoquer l'ouverture des contacts quand le courant différentiel atteint, dans des conditions spécifiées, une valeur donnée
NOTE – Un dispositif de coupure différentiel peut être une combinaison de divers éléments séparés conçus pour détecter et mesurer le courant différentiel et pour établir ou interrompre le courant.
[IEV number 442-05-02]Параллельные тексты EN-RU Operating principle of residual current devices
The operating principle of residual current devices consists in the detection of an earth fault current by means of a toroidal transformer which encloses all the live conductors, included the neutral, if distributed.
In absence of an earth fault the vectorial sum of the currents IΔ is equal to zero; in case of an earth fault, if the value of IΔ exceeds the value of the trip threshold, called IΔ n, the circuit at the secondary of the toroid sends a command signal to a dedicated opening device causing the circuit-breaker tripping.
[ABB]Принцип действия устройств дифференциального тока
Принцип действия устройств дифференциального тока заключается в обнаружении тока замыкания на землю с помощью тороидального трансформатора, который охватывает все токоведущие, в том числе и нейтральный проводник, если он используется для распределения электроэнергии.
При отсутствии замыкания на землю векторная сумма токов IΔ равна нулю. Если при возникновении замыкания на землю значение IΔ превысит уставку срабатывания, обозначаемую как IΔn, то во вторичной обмотке тороидального трансформатора будет наведена ЭДС, достаточная для включения специального устройства, вызывающего срабатывание автоматического выключателя
[Перевод Интент]Тематики
- аппарат, изделие, устройство...
- электроустановки
Обобщающие термины
Синонимы
EN
- RCD, (abbreviation)
- residual current device
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > устройство дифференциального тока
-
8 воздействующая величина электрического реле
воздействующая величина электрического реле
Электрическая величина, которая одна или в сочетании с другими электрическими величинами должна быть приложена к электрическому реле в заданных условиях для достижения ожидаемого функционирования
[ ГОСТ 16022-83]EN
energizing quantity
an electrical quantity (either current or voltage) which alone, or in combination with other such quantities, applied to a relay under specified conditions enables it to fulfil its purpose
[IEV number 446-12-01]
energizing quantity (for elementary relays)electrical quantity which, when applied to the input circuit of an elementary relay under specified conditions, enables it to fulfill its purpose
NOTE – For elementary relays the energizing quantity is usually a voltage. Therefore, the input voltage as energizing quantity is used in the definitions given below. Where a relay is energized by a given current instead, the respective terms and definitions apply with "current" used instead of "voltage".
[IEV number 444-03-01]FR
grandeur d'alimentation
grandeur électrique, courant ou tension, qui, seule ou en combinaison avec d'autres grandeurs électriques, courant ou tension, doit être appliquée dans des conditions spécifiées à un relais pour en obtenir le comportement attendu
[IEV number 446-12-01]
grandeur d'alimentation (pour les relais élémentaires), f
grandeur électrique qui, appliquée au circuit d'entrée d'un relais élémentaire dans des conditions spécifiées, lui permet d'accomplir sa fonction
NOTE – Pour les relais élémentaires, la grandeur d'alimentation est en général une tension. En conséquence, on utilise la tension d'entrée comme grandeur d'alimentation dans les définitions données ci-dessous. Lorsqu'un relais est alimenté par un courant, les termes et définitions respectifs sont à utiliser avec le terme "courant" au lieu du terme "tension".
[IEV number 444-03-01]Тематики
Классификация
>>>EN
DE
FR
49. Воздействующая величина электрического реле
D. Eingangsgrösse
Е. Energizing quantity
F. Grandeur d’alimentation
Источник: ГОСТ 16022-83: Реле электрические. Термины и определения оригинал документа
Русско-немецкий словарь нормативно-технической терминологии > воздействующая величина электрического реле
-
9 ожидаемый ток цепи (по отношению к коммутационному аппарату или плавкому предохранителю)
- unbeeinflußter Strom (in einem Stromkreis in bezug auf ein Schaltgerät oder eine Sicherung)
ожидаемый ток цепи (по отношению к коммутационному аппарату или плавкому предохранителю)
Ток, который протекал бы в цепи, если бы каждый полюс коммутационного аппарата или плавкого предохранителя был заменен проводником с пренебрежимо малым полным сопротивлением.
МЭК 60050(441-17-01).
Примечание. Метод оценки и выражения ожидаемого тока должен быть уточнен в соответствующем стандарте на аппарат.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
prospective current (of a circuit and with respect to a switching device or a fuse)
current that would flow in the circuit if each pole of the switching device or the fuse were replaced by a conductor of negligible impedance.
NOTE - The method to be used to evaluate and to express the prospective current is to be specified in the relevant publications.
[IEC 61095, ed. 2.0 (2009-02)]FR
courant présumé (d'un circuit et relatif à un appareil de connexion ou à un fusible)
courant qui circulerait dans le circuit si chaque pôle de l'appareil de connexion ou le fusible était remplacé par un conducteur d'impédance négligeable
NOTE - La méthode à employer pour évaluer et pour exprimer le courant présumé doit être spécifiée dans les publications correspondantes.
[IEC 61095, ed. 2.0 (2009-02)]Тематики
- выключатель автоматический
- выключатель, переключатель
EN
- prospective current (of a circuit and with respect to a switching device or a fuse)
DE
- unbeeinflußter Strom (in einem Stromkreis in bezug auf ein Schaltgerät oder eine Sicherung)
FR
- courant présumé (d'un circuit et relatif à un appareil de connexion ou à un fusible)
Русско-немецкий словарь нормативно-технической терминологии > ожидаемый ток цепи (по отношению к коммутационному аппарату или плавкому предохранителю)
-
10 разъемный трансформатор тока
разъемный трансформатор тока
Трансформатор тока без первичной обмотки, магнитная цепь которого может размыкаться и затем замыкаться вокруг проводника с измеряемым током.
[ ГОСТ 18685-73]EN
split core type current transformer
a current transformer without primary conductor, and primary insulation of its own, the magnetic circuit of which can be hinged open (or otherwise separated into two parts) and then closed around the insulated conductor carrying the current to be measured
[IEV number 321-02-05]FR
transformateur de courant à circuit magnétique ouvrant
transformateur de courant sans enroulement primaire et sans isolation propre dont le circuit magnétique peut être ouvert puis refermé autour d'un conducteur isolé parcouru par le courant à mesurer
[IEV number 321-02-05]
[http://www.rusotools.ru/offers/8774/разъемный-трансформатор-тока-тзрл-125-у3.html]
Трансформатор выполнен в виде опорной разъемной конструкции. Роль первичной обмотки выполняет трехфазный кабель на напряжение до 10 кВ, пропущенный в окно трансформатора. Вторичная обмотка намотана на тороидальный магнитопровод, разрезанный пополам. Обе части, залитые изоляционным компаундом на основе эпоксидной смолы, соединяются болтами. Опорой трансформатора служит основание изоляционного корпуса со специальными втулками для крепления[http://www.laborant.ru/eltech/02/4/1/27-99.htm]
Недопустимые, нерекомендуемые
- разборный трансформатор
- расчленяемый трансформатор тока
- трансформатор тока с раздельным сердечником
- трансформатор тока с расчленяемым сердечником
Тематики
Классификация
>>>Синонимы
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > разъемный трансформатор тока
-
11 вилка
вилка
Часть соединителя, имеющая штыри для осуществления контакта с розеткой и средства для электрического соединения и закрепления гибкого кабеля
[ ГОСТ Р 51322.1-99]
вилка
Часть соединителя, которая выполняется как одно целое или непосредственно прикрепляется к гибкому кабелю, подсоединяемому к аппарату или переносной розетке.
[ ГОСТ Р 51323.1-99]
вилка (кабельная вилка)
Часть соединителя, которая выполняется как одно целое и прикрепляется к гибкому кабелю, подсоединяемому к электроприбору или переносной розетке.
Примечание — Вилка кабельного соединителя аналогична вилке штепсельного соединителя
[ ГОСТ Р 51323.1-99]
вилка
-
[IEV number 442-03-01]EN
plug
the part integral with or intended to be attached directly to one flexible cable connected to the equipment or to a connector
[IEC 60309-1, ed. 4.0 (1999-02)]
plug
the part integral with or intended to be attached to one flexible cable connected to the equipment or to a connector
NOTE The plug of a cable coupler is identical to the plug of a "plug and socket-outlet".
[IEC 60309-1, ed. 4.0 (1999-02)]
plug
accessory having pins designed to engage with the contacts of a socket-outlet, also incorporating means for the electrical connection and mechanical retention of flexible cables or cords
[IEV number 442-03-01]FR
fiche
partie faisant corps avec le câble souple raccordé au matériel ou à une prise mobile ou destinée à être reliée directement à un tel câble
[IEC 60309-1, ed. 4.0 (1999-02)]
fiche
partie faisant corps avec le câble souple raccordé au matériel ou à une prise mobile ou destinée à être reliée à un tel câble
NOTE La fiche d'un prolongateur est identique à la fiche d'une prise de courant.
[IEC 60309-1, ed. 4.0 (1999-02)]
fiche
appareil pourvu de broches conçues pour s'engager dans les contacts d'un socle de prise de courant et comprenant également des pièces pour la connexion électrique et la retenue mécanique des câbles souples
[IEV number 442-03-01]Вилка (опрессованная) бытового назначения
(Кабельная) вилка (разборная) промышленного назначения
Рис. ABB1 - Розетка стационарная
2 - Вилка опрессованная
3 - Удлиннитель одноместный
4 - Соединитель штепсельный
5 - Розетка переносная опрессованная
6 - Вилка опрессованная
7 - Соединитель штепсельный
8 - Розетка приборная
9 - Удлинитель с приборной розеткой
10 - Вилка приборная
11 - Прибор
12 - Соединитель приборный
[ ГОСТ Р 51322.1-99]Форма и длина вилки должны обеспечивать ее свободное отключение рукой от соответствующей розетки.
[ ГОСТ 28244-96]
6.6.25. Вилки штепсельных соединителей должны быть выполнены таким образом, чтобы их нельзя было включать в розетки сети с более высоким номинальным напряжением, чем номинальное напряжение вилки. Конструкция розеток и вилок не должна допускать включения в розетку только одного полюса двухполюсной вилки, а также одного или двух полюсов трехполюсной вилки.
[ПУЭ]
Для осуществления соединения при помощи розетки и вилки к розетке должен подключаться источник энергии, а к вилке - ее приемник.
[ ГОСТ 12.2.007.0-75]
Тематики
Действия
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > вилка
-
12 входное полное сопротивление
входное полное сопротивление
-
[IEV number 312-06-18]EN
input impedance
impedance of the input circuit measured between the input terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the input circuit is such that the instantaneous value of the current flowing into the input terminals is a non-linear function of the instantaneous value of the input voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual input circuit, is sometimes called the "equivalent input impedance".
[IEV number 312-06-18]FR
impédance du circuit d'entrée
impédance du circuit d'entrée entre les bornes d'entrée dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit d'entrée est tel que la valeur instantanée du courant traversant les bornes d'entrée est une fonction non linéaire de la valeur instantanée de la tension d'entrée dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit d'entrée réel, est parfois appelée "impédance équivalente d'entrée".
[IEV number 312-06-18]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > входное полное сопротивление
-
13 выходное полное сопротивление
выходное полное сопротивление
-
[IEV number 312-06-19]EN
output impedance
impedance of the output circuit measured between the output terminals under operating conditions
NOTE 1 – The impedance can be expressed in terms of admittance.
NOTE 2 – In certain instances, for example, sampling devices or self-balancing potentiometers, the impedance can be different according to the instant when it is determined, before, during or after the instant of measurement.
NOTE 3 – When the output circuit is such that the instantaneous value of the current flowing into the output terminals is a non-linear function of the instantaneous value of the output voltage under specified conditions of frequency and voltage, the combination of resistance and reactance which would absorb the same active power and in which would flow a reactive current equal to the fundamental component that is flowing in the actual output circuit, is sometimes called the "equivalent output impedance".
[IEV number 312-06-19]FR
impédance du circuit de sortie
impédance du circuit de sortie entre les bornes de sortie dans les conditions de fonctionnement
NOTE 1 – L'impédance peut être exprimée en termes d'admittance.
NOTE 2 – Dans certains cas, par exemple les dispositifs d'échantillonnage ou les potentiomètres à rééquilibrage automatique, l'impédance peut être différente selon l’instant où elle est déterminée, avant, pendant ou après la mesure.
NOTE 3 – Lorsque le circuit de sortie est tel que la valeur instantanée du courant traversant les bornes de sortie est une fonction non linéaire de la valeur instantanée de la tension de sortie dans des conditions spécifiées de fréquence et de tension, l'impédance d'une combinaison formée par une résistance et une réactance qui absorberaient la même puissance active et dans laquelle circulerait un courant réactif égal à la composante fondamentale qui circule dans le circuit de sortie réel, est parfois appelée "impédance équivalente de sortie".
[IEV number 312-06-19]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > выходное полное сопротивление
-
14 автоматический выключатель с блокировкой, препятствующей замыканию
автоматический выключатель с блокировкой, препятствующей замыканию
Выключатель, каждый подвижный контакт которого защищен от замыкания, достаточного для прохождения тока, если команда на включение подается в то время, как сохраняются определенные условия.
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]EN
circuit-breaker with lock-out preventing closing
a circuit-breaker in which none of the moving contacts can make current if the closing command is initiated while the conditions which should cause the opening operation remain established.
[IEC 62271-100, ed. 2.0 (2008-04)]
circuit-breaker with lock-out device preventing closing
a circuit-breaker in which each of the moving contacts is prevented from closing sufficiently to be capable of passing current if the closing command is initiated while specified conditions remain established.
[IEC 60947-2, ed. 4.0 (2006-05)]
circuit-breaker with lock-out preventing closing
a circuit-breaker in which none of the moving contacts can make current if the closing command is initiated while the conditions which should cause the opening operation remain established
[IEV number 441-14-23]FR
disjoncteur à fermeture empêchée
disjoncteur dont aucun des contacts mobiles ne peut établir le courant si l’ordre de fermeture est donné alors que demeurent maintenues les conditions qui devraient provoquer la manceuvre d’ouverture.
[IEC 62271-100, ed. 2.0 (2008-04)]
disjoncteur à fermeture empêchée
disjoncteur dont chacun des contacts mobiles est empêché de se fermer suffisamment pour être capable de laisser passer le courant si l’ordre de fermeture est donné alors que demeurent maintenues des conditions spécifiées.
[IEC 60947-2, ed. 4.0 (2006-05)]
disjoncteur à fermeture empêchée
disjoncteur dont aucun des contacts mobiles ne peut établir le courant si l'ordre de fermeture est donné alors que demeurent maintenues les conditions qui devraient provoquer la manoeuvre d'ouverture
[IEV number 441-14-23]Тематики
Классификация
>>>Обобщающие термины
EN
- circuit breaker with lock-out device preventing closing
- circuit breaker with lock-out preventing closing
- circuit-breaker with lock-out device preventing closing
- circuit-breaker with lock-out preventing closing
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > автоматический выключатель с блокировкой, препятствующей замыканию
-
15 кабельный трансформатор тока
кабельный трансформатор тока
-EN
cable type current transformer
a current transformer without primary conductor and primary insulation of its own, which can be mounted over an insulated cable
[IEV number 321-02-04]FR
transformateur de courant pour câble
transformateur de courant sans enroulement primaire et sans isolation propre qui peut être monté sur un câble isolé
[IEV number 321-02-04]Тематики
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > кабельный трансформатор тока
-
16 максимальный расцепитель тока с независимой выдержкой времени
Максимальное реле или максимальный расцепитель тока с независимой выдержкой времени
Максимальное реле или максимальный расцепитель тока, срабатывающие с определенной выдержкой времени, которая может регулироваться, но не зависит от величины сверхтока.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
definite time-delay over-current release
an over-current release which operates with a definite time-delay, which may be adjustable, but is independent of the value of the over-current
[IEV number 441-16-34]FR
déclencheur à maximum de courant à retard indépendant
déclencheur à maximum de courant qui fonctionne avec un retard défini qui peut être réglable mais est indépendant de la valeur de la surintensité.
[IEV number 441-16-34]Параллельные тексты EN-RU Protection against overload may be provided on both the high-voltage side and the low-voltage side, depending on the transformer power. For low-power transformers the protection should be positioned on the low-voltage side, while for high-power transformers the protection should be provided on the high-voltage side. Protection against overloads on the HV side is provided using HV circuit breakers associated with maximum-current protections in constant time or independent time.
[Legrand]В зависимости от мощности трансформатора, защита от перегрузки выполняется на стороне высшего или низшего напряжения. Мощные трансформаторы защищают со стороны электросети, а маломощные – со стороны нагрузки. Защита от перегрузки на стороне высшего напряжения осуществляется высоковольтным автоматическим выключателем с максимальными расцепителями тока с независимой выдержкой времени.
[Перевод Интент]
Недопустимые, нерекомендуемые
Тематики
- выключатель автоматический
- расцепитель, тепловое реле
- реле электрическое
Классификация
>>>EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > максимальный расцепитель тока с независимой выдержкой времени
-
17 максимальный расцепитель тока с обратнозависимой выдержкой времени
максимальное реле или максимальный расцепитель тока с обратнозависимой выдержкой времени
Максимальное реле или максимальный расцепитель тока, срабатывающие с выдержкой времени, находящейся в обратной зависимости от значения сверхтока.
Примечание. Такие реле или расцепитель могут быть спроектированы так, чтобы при высоких значениях сверхтока выдержка времени достигала определенного минимального значения.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]
максимальный расцепитель тока с обратно-зависимой выдержкой времени
Максимальный расцепитель тока, срабатывающий после выдержки времени, находящейся в обратной зависимости от значения сверхтока.
Примечание — Такой расцепитель может быть спроектирован так, чтобы эта выдержка времени при высоких значениях сверхтока достигала определенного минимального значения
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
inverse time-delay over-current release
an over-current release which operates after a time-delay inversely dependent upon the value of the over-current
NOTE - Such a release may be designed so that the time-delay approaches a definite minimum value for high values of over-current.
[IEV number 441-16-35]
[IEC 62271-100, ed. 2.0 (2008-04)]
inverse time-delay overcurrent release
overcurrent release which operates after a time-delay inversely dependent upon the value of the overcurrent
NOTE - Such a release may be designed so that the time-delay approaches a definite minimum for high values of overcurrent.
[IEV number 441-16-35]
[IEC 60898-1, ed. 1.0 (2002-01)]FR
déclencheur à maximum de courant à temps inverse
déclencheur à maximum de courant qui fonctionne après un intervalle de temps qui varie en raison inverse de la valeur de la surintensité
NOTE - Un tel déclencheur peut être prévu pour que le retard atteigne une valeur minimale définie pour les valeurs élevées de la surintensité.
[IEV number 441-16-35]
[IEC 62271-100, ed. 2.0 (2008-04)]
[IEC 60898-1, ed. 1.0 (2002-01)]Недопустимые, нерекомендуемые
Тематики
- выключатель автоматический
- расцепитель, тепловое реле
Классификация
>>>EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > максимальный расцепитель тока с обратнозависимой выдержкой времени
-
18 обнаружение (дифференциального тока)
обнаружение
-
[IEV number 442-05-24]EN
detection (of a residual current)
function consisting in sensing the presence of a residual current
NOTE – This function can be performed, for example, by a transformer integrating the vector sum of the currents.
[IEV number 442-05-24]FR
détection (d'un courant différentiel)
fonction qui consiste à détecter la présence d'un courant différentiel
NOTE – Cette fonction peut être remplie par exemple par un transformateur intégrant la somme vectorielle des courants.
[IEV number 442-05-24]EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > обнаружение (дифференциального тока)
-
19 предельное значение выходного тока
предельное значение выходного тока
-
[IEV number 314-04-09]EN
limiting value of the output current
upper limit of output current which cannot, by design, be exceeded under any conditions
[IEV number 314-04-09]FR
valeur limite du courant de sortie
valeur supérieure du courant de sortie qui, par conception, ne peut pas être dépassée, quelles que soient les conditions d’utilisation
[IEV number 314-04-09]Тематики
- измерение электр. величин в целом
EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > предельное значение выходного тока
-
20 расцепитель тока
токовый расцепитель 1)
-
[IEV number 442-01-44]EN
current cut-out
a current sensing device intended to switch-off automatically under abnormal operating condition and which has no provision for adjustment by the user
[IEV number 442-01-44]FR
limiteur de courant
dispositif sensible au courant, destiné à interrompre automatiquement un circuit dans des conditions de fonctionnement anormal, et qui ne peut être réglé par l'usager
[IEV number 442-01-44]1) Должно быть расцепитель тока
[Интент]EN
DE
FR
Русско-немецкий словарь нормативно-технической терминологии > расцепитель тока
См. также в других словарях:
Être au courant — ● Être au courant être informé, renseigné : Étiez vous au courant qu il allait démissionner ? … Encyclopédie Universelle
courant — courant, ante (kou ran, rant t ) adj. 1° Qui court. Adverbialement. Tout courant, en grande hâte. Elle envoie tout courant savoir de Mme du Châtelet, si S. • M. [le roi de Prusse] passera, VOLT. Roi de Prusse, 14. Tout courant, sans… … Dictionnaire de la Langue Française d'Émile Littré
être averti — ● être averti verbe passif Être au courant des choses : Un homme averti en vaut deux. Être un connaisseur : Un critique averti. Être au courant des réalités de la vie : Jeune fille avertie. ● être averti (synonymes) verbe passif Être au courant… … Encyclopédie Universelle
courant — COURANT, ANTE. adject. Qui court. De l eau courante, c est à dire, De l eau vive qui coule toujours. Un ruisseau courant. f♛/b] On dit figurément: L intérêt courant, le terme courant, l année courante, le prix courant. Acheter des denrées, des… … Dictionnaire de l'Académie Française 1798
Être dans le coup — ● Être dans le coup être au courant d une affaire (surtout louche) ; être au courant de tout ce qui se passe, et, en particulier, de ce qui est à la mode … Encyclopédie Universelle
Être sur toutes les bouches — ● Être sur toutes les bouches être le sujet, le thème de toutes les conversations ; être banal, courant … Encyclopédie Universelle
être informé — ● être informé verbe passif Avoir des renseignements, des informations, être au courant de quelque chose : Les consommateurs ne sont pas assez informés. ● être informé (expressions) verbe passif De source bien informée, de quelqu un dont les… … Encyclopédie Universelle
Être dans le mouvement — ● Être dans le mouvement être au courant de l actualité, des nouveautés … Encyclopédie Universelle
Être dans le secret des dieux — ● Être dans le secret des dieux avoir reçu des confidences de personnages importants, être au courant d une situation sur laquelle personne n a d information … Encyclopédie Universelle
Être hors du coup — ● Être hors du coup ne pas être au courant d une affaire ; ne pas y participer … Encyclopédie Universelle
Être à la page — ● Être à la page être au courant des dernières nouveautés, suivre la mode, ce qui se fait … Encyclopédie Universelle