-
1 НКУ распределения и управления
низковольтное устройство распределения и управления (НКУ)
Низковольтные коммутационные аппараты и устройства управления, измерения, сигнализации, защиты, регулирования, собранные совместно, со всеми внутренними электрическими и механическими соединениями и конструктивными элементами.
[ ГОСТ Р МЭК 61439-1-2012]
низковольтное устройство распределения и управления
Комбинация низковольтных коммутационных аппаратов с устройствами управления, измерения, сигнализации, защиты, регулирования и т. п., полностью смонтированных изготовителем НКУ (под его ответственность на единой конструктивной основе) со всеми внутренними электрическими и механическими соединениями с соответствующими конструктивными элементами
Примечания
1. В настоящем стандарте сокращение НКУ используют для обозначения низковольтных комплектных устройств распределения и управления.
2. Аппараты, входящие в состав НКУ, могут быть электромеханическими или электронными.
3. По различным причинам, например по условиям транспортирования или изготовления, некоторые операции сборки могут быть выполнены на месте установки, вне предприятия-изготовителя.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]EN
power switchgear and controlgear assembly (PSC-assembly)
low-voltage switchgear and controlgear assembly used to distribute and control energy for all types of loads, intended for industrial, commercial and similar applications where operation by ordinary persons is not intended
[IEC 61439-2, ed. 1.0 (2009-01)]
low-voltage switchgear and controlgear assembly
combination of one or more low-voltage switching devices together with associated control, measuring, signalling, protective, regulation equipment, etc., completely assembled under the responsibility of the manufacturer with all the internal electrical and mechanical interconnections and structural parts.
[IEC 61892-3, ed. 2.0 (2007-11)]
switchgear and controlgear
a general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures
[IEV number 441-11-01]
switchgear and controlgear
electric equipment intended to be connected to an electric circuit for the purpose of carrying out one or more of the following functions: protection, control, isolation, switching
NOTE – The French and English terms can be considered as equivalent in most cases. However, the French term has a broader meaning than the English term and includes for example connecting devices, plugs and socket-outlets, etc. In English, these latter devices are known as accessories.
[IEV number 826-16-03 ]
switchboard
A large single electric control panel, frame, or assembly of panels on which are mounted (either on the back or on the face, or both) switches, overcurrent and other protective devices, buses, and usually instruments; not intended for installation in a cabinet but may be completely enclosed in metal; usually is accessible from both the front and rear.
[ McGraw-Hill Dictionary of Architecture & Construction]
switchboard
One or more panels accommodating control switches, indicators, and other apparatus for operating electric circuits
[ The American Heritage Dictionary of the English Language]FR
ensemble d'appareillage de puissance (ensemble PSC)
ensemble d'appareillage à basse tension utilisé pour répartir et commander l'énergie pour tous les types de charges et prévu pour des applications industrielles, commerciales et analogues dans lesquelles l'exploitation par des personnes ordinaires n'est pas prévue
[IEC 61439-2, ed. 1.0 (2009-01)]
appareillage, m
matériel électrique destiné à être relié à un circuit électrique en vue d'assurer une ou plusieurs des fonctions suivantes: protection, commande, sectionnement, connexion
NOTE – Les termes français et anglais peuvent être considérés comme équivalents dans la plupart des cas. Toutefois, le terme français couvre un domaine plus étendu que le terme anglais, et comprend notamment les dispositifs de connexion, les prises de courant, etc. En anglais, ces derniers sont dénommés "accessories".
[IEV number 826-16-03 ]
appareillage
terme général applicable aux appareils de connexion et à leur combinaison avec des appareils de commande, de mesure, de protection et de réglage qui leur sont associés, ainsi qu'aux ensembles de tels appareils avec les connexions, les accessoires, les enveloppes et les charpentes correspondantes
[IEV number 441-11-01]
A switchboard as defined in the National Electrical Code is a large single panel, frame, or assembly of panels on which are mounted, on the face or back or both switches, overcurrent and other protective devices, buses, and, usually, instruments.
Switchboards are generally accessible from the rear as well as from the front and are not intended to be installed in cabinets.
The types of switchboards, classified by basic features of construction, are as follows:
1. Live-front vertical panels
2. Dead-front boards
3. Safety enclosed boards( metal-clad)
[American electricians’ handbook]
The switchboard plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.
Its definition, design and installation are based on precise rules; there is no place for improvisation.
The IEC 61439 standard aims to better define " low-voltage switchgear and controlgear assemblies", ensuring that the specified performances are reached.
It specifies in particular:
> the responsibilities of each player, distinguishing those of the original equipment manufacturer - the organization that performed the original design and associated verification of an assembly in accordance with the standard, and of the assembly manufacturer - the organization taking responsibility for the finished assembly;
> the design and verification rules, constituting a benchmark for product certification.
All the component parts of the electrical switchboard are concerned by the IEC 61439 standard.
Equipment produced in accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.
A switchboard must comply with the requirements of standard IEC 61439-1 and 2 to guarantee the safety and reliability of the installation.
Managers of installations, fully aware of the professional and legal liabilities weighing on their company and on themselves, demand a high level of safety for the electrical installation.
What is more, the serious economic consequences of prolonged halts in production mean that the electrical switchboard must provide excellent continuity of service, whatever the operating conditions.
[Schneider Electric]НКУ играет главную роль в обеспечении электроэнергией, удовлетворяя при этом всем требованиям по безопасности людей и сохранности имущества.
Выбор конструкции, проектирование и монтаж основаны на чётких правилах, не допускающих никакой импровизации.
Требования к низковольтным комплектным устройствам распределения и управления сформулированы в стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000).
В частности, он определяет:
> распределение ответственности между изготовителем НКУ - организацией, разработавшей конструкцию НКУ и проверившей его на соответствие требованиям стандарта, и сборщиком – организацией, выполнившей сборку НКУ;
> конструкцию, технические характеристики, виды и методы испытаний НКУ.
В стандарте МЭК 61439 (ГОСТ Р 51321. 1-2000) описываются все компоненты НКУ.
Оборудование, изготовленное в соответствии с требованиями этого стандарта, обеспечивает безопасность и надежность электроустановки.
Для того чтобы гарантировать безопасность эксплуатации и надежность работы электроустановки, распределительный щит должен соответствовать требованиям стандарта МЭК 61439-1 и 2.
Лица, ответственные за электроустановки, должны быть полностью осведомлены о профессиональной и юридической ответственности, возложенной на их компанию и на них лично, за обеспечение высокого уровня безопасности эксплуатации этих электроустановок.
Кроме того, поскольку длительные перерывы производства приводят к серьезным экономическим последствиям, электрический распределительный щит должен обеспечивать надежную и бесперебойную работу независимо от условий эксплуатации.
[Перевод Интент]LV switchgear assemblies are undoubtedly the components of the electric installation more subject to the direct intervention of personnel (operations, maintenance, etc.) and for this reason users demand from them higher and higher safety requirements.
The compliance of an assembly with the state of the art and therefore, presumptively, with the relevant technical Standard, cannot be based only on the fact that the components which constitute it comply with the state of the art and therefore, at least presumptively, with the relevant technical standards.
In other words, the whole assembly must be designed, built and tested in compliance with the state of the art.
Since the assemblies under consideration are low voltage equipment, their rated voltage shall not exceed 1000 Va.c. or 1500 Vd.c. As regards currents, neither upper nor lower limits are provided in the application field of this Standard.
The Standard IEC 60439-1 states the construction, safety and maintenance requirements for low voltage switchgear and controlgear assemblies, without dealing with the functional aspects which remain a competence of the designer of the plant for which the assembly is intended.
[ABB]Низковольтные комплектные устройства (НКУ), вне всякого сомнения, являются частями электроустановок, которые наиболее подвержены непосредственному вмешательству оперативного, обслуживающего и т. п. персонала. Вот почему требования потребителей к безопасности НКУ становятся все выше и выше.
Соответствие НКУ современному положению дел и вследствие этого, гипотетически, соответствующим техническим стандартам, не может основываться только на том факте, что составляющие НКУ компоненты соответствуют современному состоянию дел и поэтому, по крайней мере, гипотетически, - соответствующим техническим стандартам
Другими словами, НКУ должно быть разработано, изготовлено и испытано в соответствии с современными требованиями.
Мы рассматриваем низковольтные комплектные устройства и это означает, что их номинальное напряжение не превышает 1000 В переменного тока или 1500 В постоянного тока. Что касается тока, то ни верхнее, ни нижнее значение стандартами, относящимися к данной области, не оговариваются
Стандарт МЭК 60439-1 устанавливает требования к конструкции, безопасности и техническому обслуживанию низковольтных комплектных устройств без учета их функций, полагая, что функции НКУ являются компетенцией проектировщиков электроустановки, частью которых эти НКУ являются.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Действия
Синонимы
Сопутствующие термины
EN
- assembly
- electrical switchboard
- low voltage controlgear and assembly
- low voltage switchboard
- low voltage switchgear and controlgear assembly
- low-voltage switchgear and controlgear assembly
- LV switchgear and controlgear assembly
- LV switchgear assembly
- panel
- power switchgear and controlgear assembly
- PSC-assembly
- switchboard
- switchgear and controlgear
- switchgear/controlgear
DE
- Schaltanlagen und/oder Schaltgeräte
FR
Русско-французский словарь нормативно-технической терминологии > НКУ распределения и управления
-
2 минимальная ширина
минимальная ширина
bf
Наименьшее осевое расстояние между обеими поверхностями шкива или между фланцами шкива, которое может быть использовано для ремня заданной ширины
[ ГОСТ 28500-90( ИСО 5288-82)]EN
minimum pulley width
Smallest lateral distance across the face of a pulley (or between the flanges of a flanged pulley) that can be used for a stated belt width
[ ГОСТ 28500-90( ИСО 5288-82)]FR
largeur minimale de poulie
Plus petite distance axiale entre les deux faces d'une poulie, ou entre les flasques d'une poulie flasquée, qui puisse être utilisée pour une courroie de largeur donnée
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > минимальная ширина
-
3 контактная сторона части электрического соединителя
- face avant d’un connecteur
контактная сторона части электрического соединителя
Сторона части электрического соединителя, на которой расположены рабочие поверхности контактов.
Примечание. Рабочая поверхность контакта — по ГОСТ 14312-79
[ ГОСТ 21962-76]EN
connector front
side of a connector which is the mating face
[IEV number 581-27-49]FR
face avant d’un connecteur
côté d’un connecteur qui est sa face d’accouplement
[IEV number 581-27-49]Тематики
Обобщающие термины
Синонимы
EN
DE
- Steckverbinder-Vorderseite, f
FR
- face avant d’un connecteur
Русско-французский словарь нормативно-технической терминологии > контактная сторона части электрического соединителя
-
4 компонент системы кабельных или специальных кабельных коробов, предназначенной для установки заподлицо с полом
компонент системы кабельных или специальных кабельных коробов, предназначенной для установки заподлицо с полом
Компонент системы, который в нормальных условиях эксплуатации защищен от воздействия внешней нагрузки материалами чистого пола со всех сторон, кроме верхней поверхности, встроенный заподлицо с верхней поверхностью чистого пола, при допускаемом воздействии на незащищенную поверхность нагрузок, создаваемых движущимся транспортом.
[ ГОСТ Р МЭК 61084-2-2-2007]EN
flushfloor system component
a system component which in normal use is relieved from external mechanical load by the materials of the finished floor on all but the upper face and which is nominally built-in flush with the upper surface of the finished floor. The unprotected face is considered to be exposed to traffic loads
[IEC 61084-2-2, ed. 1.0 (2003-05)]FR
composant du système encastré au sol
composant du système qui, en usage normal, est soulagé des charges mécaniques extérieures par les matériaux du sol fini sur toutes les faces sauf la face supérieure et qui est, par définition, installé affleurant le niveau supérieur du sol fini. La face non protégée est considérée comme exposée aux charges dues à la circulation.
[IEC 61084-2-2, ed. 1.0 (2003-05)]Тематики
- изделие электромонтажное
- электропроводка, электромонтаж
EN
FR
Русско-французский словарь нормативно-технической терминологии > компонент системы кабельных или специальных кабельных коробов, предназначенной для установки заподлицо с полом
-
5 система кабельных или специальных кабельных коробов, предназначенная для установки заподлицо с полом
система кабельных или специальных кабельных коробов, предназначенная для установки заподлицо с полом
Система кабельных или специальных кабельных коробов, компоненты которой, за исключением напольных устройств для подключения, защищены от воздействия внешних механических нагрузок строительными материалами пола со всех сторон, кроме верхней поверхности, которая встроена заподлицо с верхней поверхностью чистого пола, при допускаемом воздействии на незащищенную поверхность нагрузок, создаваемых движущимся транспортом (рисунок 104).
Рис. 104
Система кабельных или специальных кабельных коробов, предназначенная для установки заподлицо с полом
1 - Напольное устройство для подключения
[ ГОСТ Р МЭК 61084-2-2-2007]EN
flushfloor cable trunking system or cable ducting system
cable trunking system or cable ducting system whose components, except floor service units, are relieved from external mechanical load by the materials of the floor on all but the upper face and which is built-in flush with the upper surface of the finished floor. The unprotected face is considered to be exposed to traffic loads
[IEC 61084-2-2, ed. 1.0 (2003-05)]FR
système de goulottes ou système de conduits profilés encastrés au sol
système de goulottes ou système de conduits profilés dont les composants, exceptés les blocs de service au sol, sont soulagés des charges mécaniques extérieures par les matériaux du sol sur toutes les faces sauf la face supérieure, et qui est monté affleurant le niveau supérieur du sol fini. La face non protégée est considérée comme exposée aux charges dues à la circulation
[IEC 61084-2-2, ed. 1.0 (2003-05)]Тематики
- изделие электромонтажное
- электропроводка, электромонтаж
EN
FR
Русско-французский словарь нормативно-технической терминологии > система кабельных или специальных кабельных коробов, предназначенная для установки заподлицо с полом
-
6 угловой соединитель
EN
right-angle connector
connector in which the axis of the cable outlet is at right-angle with the axis of the mating face
[IEV number 581-26-23]FR
connecteur à angle droit
connecteur dans lequel l’axe de sortie du câble forme un angle droit avec l’axe de la face d’accouplement
[IEV number 581-26-23]
Рис. Phoenix Contact
Угловой соединитель (приборная вилка)
Рис. Phoenix Contact
Угловой соединитель (кабельная вилка) в пластмассовом корпусе
[http://www.zip-2002.ru/?z=grey&i=97&p=394&id=78433]Отечественный соединитель(российского производства) (кабельная вилка).
Угловая часть в российских соединителях назывется угловым кожухом или угловым патрубком-
RU - Нажимная гайка
EN - Pressure nut
DE - Druckmutter -
RU - Зажим
EN - Clamping cage
DE - Klemmkorb -
RU - Уплотнитель кабеля
EN - Cable seal
DE - Kabeldichtung -
RU - Угловой корпус
EN - Angular housing
DE - Winkelgehäuse -
RU - Контактный (штыревой) наконечник
EN - Male insert
DE - Steckeinsatz
Параллельные тексты EN-RU
Параллельные тексты DE-RUEN
DE
RU
Assembly
1. Push the pressure screw, clamping cage, cable seal and the angular housing over the cable.
2. Strip the cable to a length of 12 mm.
3. Strip the wires to a length of 3 mm and twist them together.
4. Solder the wires to the solder connections of the male insert.
5. Insert the male insert in the desired position in the angular housing and screw it in tightly.
6. Screw the pressure screw tightly into the housing.
[Phoenix ContactKonfektionierung
1. Fädeln Sie die Druckschraube, den Klemmkorb, die Kabeldichtung und das Winkelgehäuse über das Kabel.
2. Manteln Sie das Kabel auf einer Länge von 12 mm ab.
3. Isolieren Sie die Adern auf einer Länge von 3 mm ab und verdrillen Sie diese.
4. Löten Sie die Adern an die Lötanschlüsse des Steckeinsatzes an.
5. Führen Sie den Steckeinsatz in der gewünschten Position in das Winkelgehäuse ein und schrauben Sie ihn fest.
6. Schrauben Sie die Druckschraube fest in das Gehäuse.
[Phoenix Contact]Порядок сборки соединителя
1.Пропустите кабель через нажимную гайку, зажим, кабельный уплотнитель и угловой корпус соединителя.
2. Снимите с кабеля оболочку на участке длиной 12 мм.
3. Снимите 3 мм изоляции с жил кабеля. Скрутите проволоки каждой жилы.
4. Припаяйте жилы кабеля к соответствующим хвостовикам контакт-деталей контактного наконечника.
5. Подтягивая кабель, надвиньте контактный наконечник на корпус соединителя и плотно прикрутите его с помощью накидной гайки.
6. Сдвиньте уплотнитель кабеля и зажим внутрь корпуса соединителя
7. Плотно вкрутите нажимную гайку в корпус соединителя.
[Перевод Интент]Тематики
Классификация
>>>EN
DE
- Winkelsteckverbinder, m
FR
Смотри также
Русско-французский словарь нормативно-технической терминологии > угловой соединитель
7 комплектное распределительное устройство в металлической оболочке
- pareillage d’armoire
- appareillage sous enveloppe métallique
- appareillage recouvert de métal
- appareillage à compartiments (avec cloisons non métalliques)
комплектное распределительное устройство в металлической оболочке
-EN
metal-enclosed switchgear
switchgear assemblies with an external metallic enclosure intended to be earthed and complete except for external connections
NOTE The metal-enclosed switchgear is subdivided into three types:
– metal-clad switchgear;
– compartmented switchgear (with one or more non-metallic partitions);
– cubicle switchgear
[IEC 61992-1, ed. 2.0 (2006-02)]
metal-clad switchgear
metal-enclosed switchgear in which components are arranged in separate compartments with metal partitions intended to be earthed
NOTE 1 This term applies to metal-enclosed switchgear with metal partitions providing the degree of protection (or higher) included in IEC 61992-6 and having separate compartments at least for the following components:
– each main switching device;
– components connected to one side of a main switching device, for example, feeder circuit;
– components connected to the other side of the main switching device, for example, busbars; where more than one set of busbars is provided, each set is in a separate compartment.
NOTE 2 Metal-enclosed switchgear having metal partitions and meeting all the requirements of NOTE 1 may utilise an insulating shutter barrier as a part of a shutter arrangement, the combination of which provides the degree of protection included in Table 1 of IEC 61992-6 (or higher) and satisfies the requirements of the standard for partitions and shutters made of insulating material.
[IEC 61992-1, ed. 2.0 (2006-02)]
compartmented switchgear (with non-metallic partitions)
metal-enclosed switchgear in which components are arranged in separate compartments as for metal-clad switchgear, but with one or more non-metallic partitions providing the degree of protection (or higher) included in Table 1 of IEC 61992-6
NOTE Metal-enclosed switchgear in which the main circuit components are individually embedded in solid insulating material can be considered as an alternative, provided that the conditions specified in IEC 60466 are met.
[IEC 61992-1, ed. 2.0 (2006-02)]
cubicle switchgear
switchgear, other than metal-clad and compartmented switchgear
NOTE This term applies to switchgear having a metal enclosure and having
– a number of compartments fewer than required for metal-clad or compartmented switchgear, or
– partitions having a degree of protection lower than those indicated in Table 1 of IEC 61992-6, or
– no partitions.
[IEC 61992-1, ed. 2.0 (2006-02)]FR
appareillage sous enveloppe métallique
ensemble d’appareillage avec une enveloppe métallique externe destinée à être mise à la terre, entièrement terminé, à l’exception des connexions extérieures
NOTE L’appareillage sous enveloppe métallique se subdivise en trois types:
– appareillage recouvert de métal;
– appareillage à compartiments (avec une ou plusieurs cloisons non métalliques);
– appareillage d’armoire.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage recouvert de métal
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés par des cloisons métalliques destinées à être mises à la terre
NOTE 1 Ce terme s’applique à l’appareillage sous enveloppe métallique avec des cloisons métalliques offrant le degré de protection de la CEI 61992-6 (ou un degré supérieur) et ayant des compartiments séparés au moins pour les éléments constitutifs suivants:
– chaque appareil principal de connexion;
– les éléments constitutifs connectés à une face de l'appareil principal de connexion, par exemple le circuit d’alimentation;
– les éléments constitutifs connectés à l’autre face de l'appareil principal de connexion, par exemple les jeux de barres; lorsqu’il y a plus d’un jeu de barres, chaque jeu est dans un compartiment séparé.
NOTE 2 L’appareillage sous enveloppe métallique qui possède des cloisons métalliques et qui répond à toutes les dispositions de la note 1 peut utiliser une barrière en volet isolant comme une partie d’une disposition de volet, dont la combinaison fournit un degré de protection inclus au Tableau 1 de la CEI 61992-6 (ou un degré supérieur) et satisfait aux exigences de la norme pour les cloisons et les volets en matériau isolant.
[IEC 61992-1, ed. 2.0 (2006-02)]
appareillage à compartiments (avec cloisons non métalliques)
appareillage sous enveloppe métallique dans lequel les éléments constitutifs sont disposés dans des compartiments séparés comme pour l’appareillage recouvert de métal, mais avec une ou plusieurs cloisons non métalliques fournissant le degré de protection du Tableau 1 de la CEI 61992-6 (ou un degré supérieur)
NOTE L’appareillage sous enveloppe métallique dans lequel les éléments constitutifs du circuit principal sont noyés individuellement dans un matériau isolant solide peut être considéré comme une alternative, si les conditions spécifiées dans la CEI 60466 sont satisfaites.
[IEC 61992-1, ed. 2.0 (2006-02)]
pareillage d’armoire
appareillage, autre que l’appareillage recouvert de métal ou à compartiments
NOTE Ce terme s’applique à l’appareillage ayant une enveloppe métallique et ayant:
– soit un nombre de compartiments inférieur à celui exigé pour les appareillages recouverts de métal ou à compartiments;
– soit des cloisons d’un degré de protection inférieur à ceux du Tableau 1 de la CEI 61992-6;
– soit pas de cloisons.
[IEC 61992-1, ed. 2.0 (2006-02)]
Комплектное распределительное устройство в металлической оболочке
Рис. ABBГОСТ 14693-90 - Устройства комплектные распределительные негерметизированные в металлической оболочке на напряжение до 10 кВ
Тематики
- комплектное распред. устройство (КРУ)
Синонимы
EN
- compartmented switchgear (with non-metallic partitions)
- cubicle switchgear
- MCSG
- MESG
- metal clad switch gear
- metal clad switchgear
- metal-enclosed switchgear
- metalclad switch gear
- metalclad switchgear
FR
Русско-французский словарь нормативно-технической терминологии > комплектное распределительное устройство в металлической оболочке
8 внутригородской район
внутригородской район
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
inner city
1) Part of a city at or near the centre, especially a slum area where poor people live in bad housing.
2) City centres of many industrialized countries which exhibit environmental degradation. The numerous and highly competitive activities entailing land use overwhelm the limited space and create a situation of overcrowding, functional incompatibility and cultural degradation. Inner city areas have a high level of commercial specialization, a large number of offices and a sizeable daytime population. At the same time, city centres generally remain a sort of ghetto for a permanent, low-income population living in run-down housing and enjoying little in the way of public services and civic amenities. The concentration of service industries inevitably entails the replacement of traditional housing and shops by office blocks, the provision of basic utilities at the expense of civic amenities and the provision of major access roads which eat up urban space. Structures of historic origin are often unable to meet modern requirements and, notwithstanding their value, frequently face demolition.
(Source: PHC / WPR)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > внутригородской район
9 зубья
зубья
Поперечные элементы, расположенные на внутренней поверхности ремня, для сцепления с зубьями синхронного шкива
[ ГОСТ 28500-90( ИСО 5288-82)]EN
tooth
One of the transverse elements protruding from the bottom of the belt having the profile to mesh with the teeth in a synchronous pulley
[ ГОСТ 28500-90( ИСО 5288-82)]FR
dent
Un des éléments transversaux faisant saillie sous la face intérieure de la courroie et ayant le profil pour engrener avec les dents d'une poulie synchrone
[ ГОСТ 28500-90( ИСО 5288-82)]зубья
Равностоящие поперечные элементы, выступающие на окружности шкива, с которыми зубья ремня образуют зацепление для передачи тангенциального усилия
[ ГОСТ 28500-90( ИСО 5288-82)]EN
teeth
Equally spaced transverse protrusions with which the belt teeth mesh to provide a transfer of force between the belt and the pulley
[ ГОСТ 28500-90( ИСО 5288-82)]FR
dents
Eléments transversaux équidistants qui font saillie à la périphérie d'une poulie et avec lesquels les dents d'une courroie engrénent pour transmettre un effort tangential de l'une à l'autre
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > зубья
10 извлекаемый контакт с передним освобождением защелки
- contact déverrouillable par l’avant
извлекаемый контакт с передним освобождением защелки
-EN
front release contact
removable contact in which release is effected from the mating face
[IEV number 581-27-01]FR
contact déverrouillable par l’avant
contact amovible libéré à partir de la face d’accouplement
[IEV number 581-27-01]
[http://www.cirris.com/testing/guidelines/push-click-pull.html]-
Провод
-
Рабочая сторона части соединителя (изолятора)
-
Извлекаемый контакт
- Защелка (Retaining clip)
-
Инструмент для извлечения контакта
-
Толкатель инструмента
-
Контакт в зафиксированном положении (Contact in locked position)
-
Инструмент раскрыл защелку (Tool tip opening retaining clip)
-
Толкатель инструмента выталкивает извлекаемый контакт (Plunger of tool pushing contact to rear)
Тематики
EN
DE
- von vorn entriegelbarer Kontakt, m
FR
- contact déverrouillable par l’avant
Русско-французский словарь нормативно-технической терминологии > извлекаемый контакт с передним освобождением защелки
11 НКУ открытое
НКУ открытое
НКУ, на несущей конструкции которого установлена электрическая аппаратура, при этом части электрической аппаратуры, находящиеся под напряжением, остаются доступными прикосновению.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
открытое НКУ
НКУ, на монтажной раме которого установлена электрическая аппаратура, при этом части электрической аппаратуры, находящиеся под напряжением, доступны для прикосновения.
[ ГОСТ Р МЭК 61439.1-2013]EN
open-type assembly
assembly consisting of a structure which supports the electrical equipment, the live parts of the electrical equipment being accessible
[IEC 61439-1, ed. 2.0 (2011-08)]FR
ensemble ouvert
ensemble constitué d'un châssis qui supporte le matériel électrique, les parties actives du matériel électrique étant accessibles
[IEC 61439-1, ed. 2.0 (2011-08)]
Live-front switchboards have the current-carrying parts of switching equipment mounted on the exposed face or front of the panels. They are not as a rule employed in new boards when the voltage exceeds 600 V.
[American electricians’ handbook]
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
Синонимы
EN
- control board
- live-front switchboard
- live-front switchboard panel
- live-front vertical panel
- open-type assembly
- panel board
FR
Русско-французский словарь нормативно-технической терминологии > НКУ открытое
12 островная экосистема
островная экосистема
—
[ http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]EN
island ecosystem
Unique but fragile and vulnerable ecosystems due to the fact that the evolution of their flora and fauna has taken place in relative isolation. Many remote islands have some of the most unique flora in the world; some have species of plants and animals that are not found anywhere else, which have evolved in a specialized way, sheltered from the fierce competition that species face on mainland. (Source: WRIGHT)
[http://www.eionet.europa.eu/gemet/alphabetic?langcode=en]Тематики
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > островная экосистема
13 НКУ, защищенное с передней стороны
НКУ, защищенное с передней стороны
НКУ открытое, имеющее с передней стороны степень защиты не менее IP2X. Доступ к частям, находящимся под напряжением, возможен с других сторон.
[ ГОСТ Р 51321. 1-2000 ( МЭК 60439-1-92)]
НКУ, защищенное с передней стороны
Открытое НКУ, закрытое с передней стороны, при этом части, находящиеся под напряжением, доступны для прикосновения с других сторон.
[ ГОСТ Р МЭК 61439.1-2013]EN
dead-front assembly
open-type assembly with a front cover; live parts may be accessible from directions other than the front
[IEC 61439-1, ed. 2.0 (2011-08)]FR
ensemble ouvert à protection frontale
ensemble ouvert avec un panneau avant; les parties actives pouvant être accessibles à partir des autres faces que la face avant
[IEC 61439-1, ed. 2.0 (2011-08)]
Dead-front switchboards are the more modern type and are employed for systems of all voltages. With this type no live parts are mounted on the front of the board.
[American electricians’ handbook]
Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>Обобщающие термины
EN
FR
Русско-французский словарь нормативно-технической терминологии > НКУ, защищенное с передней стороны
14 синхронный ремень
синхронный ремень
Ремень, прямое сечение которого имеет форму прямоугольника, на внутренней стороне которого расположены на равном расстоянии друг от друга поперечные зубья трапециевидного профиля
[ ГОСТ 28500-90( ИСО 5288-82)]EN
synchronous belt
A belt, the cross section of which is in the general form of a rectangle, but with transverse teeth extending from the lower base at regularly spaced intervals
[ ГОСТ 28500-90( ИСО 5288-82)]FR
courroie synchrone
Courroie dont la section droite à la forme générale d'un rectangle mais qui comporte à des intervalles réguliers des dents transversales sous sa face intérieure
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > синхронный ремень
15 ширина основания зуба
ширина основания зуба
bw
Расстояние, измеренное по хорде между теоретическими точками пересечения нижней окружности с боковыми поверхностями, расположенными напротив двух соседних зубьев
[ ГОСТ 28500-90( ИСО 5288-82)]EN
width at tooth space root
Linear distance between the theoretical points of intersection of the tooth space flanks with the root circle
[ ГОСТ 28500-90( ИСО 5288-82)]FR
largeur au pied de dent
Distance mesurée suivant une corde entre les points théoriques d'intersection du cercle de pied avec les flancs, se faisant face, de deux dents consécutives
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > ширина основания зуба
16 угол пространства между зубьями
угол пространства между зубьями
2Ø
Угол между боковыми поверхностями двух соседних зубьев
[ ГОСТ 28500-90( ИСО 5288-82)]EN
tooth space angle
Included angle between the flanks of the tooth space
[ ГОСТ 28500-90( ИСО 5288-82)]FR
angle au sommet de l'intervalle
Angle compris entre les flancs, se faisant face, de deux dents consécutives
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
FR
Русско-французский словарь нормативно-технической терминологии > угол пространства между зубьями
См. также в других словарях:
The Face (character) — The Face is a comic book parody character used in short stories of comic book fan fiction by Ben del Mundo. He was created on November 20, 2004, and was inspired by the DC Comics character, the Question. His attire consists of a costume of gray,… … Wikipedia
The Face at the Window — is the name of over ten films that have been released since 1910:*The Face at the Window (1910 film) *The Face at the Window (1912 film) *The Face at the Window (1913 film) *The Face at the Window (1914 film) *The Face at the Window (1915 film)… … Wikipedia
The Face Shop — (더페이스샵) is a South Korea based retailer of body, bath, skin care and make up products aimed at both women and men. It was founded in 1962 as a wholesale manufacturer of cosmetics. In 2003 the first retail stores opened, and spread rapidly. As of… … Wikipedia
The Face on the Barroom Floor (poem) — The Face on the Barroom Floor is a poem written by Hugh Antoine D Arcy in 1887. OverviewWritten in ballad form, it tells the story of an artist ruined by love; having lost his beloved Madeline to another man, he has turned to drink. In the poem,… … Wikipedia
The Face (Corbet-Singleton) — The Face is a horror novel written by Australian author Paul Corbet Singleton. It was published in 1997 by Scholastic Press. It tells the story of Gibson Carver, a fifteen year old boy who is struggling to adapt to life at a new school, all the… … Wikipedia
The Face on the Cutting-Room Floor (disambiguation) — The proverbial face on the cutting room floor is a character in a movie who, after the shooting is completed, is completely removed from the film, for whatever reason. The same idea also holds true for documentaries, where in the editing process… … Wikipedia
The Face on the Bar Room Floor — can refer to the following:* The Face on the Barroom Floor (poem), an 1887 poem by Hugh Antoine d Arcy * The Face on the Barroom Floor (painting), a 1936 painting inspired by the poem * The Face on the Barroom Floor (opera), a chamber opera by… … Wikipedia
The Face on the Barroom Floor (painting) — The Face on the Barroom Floor is a painting on the floor of the Teller House Bar in Central City, Colorado, United States. It was painted in 1936 by Herndon Davis.tory of the paintingDavis had been commissioned by the Central City Opera… … Wikipedia
The Face Is Familiar — is a television game show which aired 18 episodes on CBS during the summer of 1966 in colour. The show was hosted by Jack Whitaker and featured celebrity guests including Bob Crane, Dick Van Patten and June Lockhart. The Face Is Familiar was… … Wikipedia
The Face on the Barroom Floor — can refer to:*a poem by Hugh Antoine D Arcy; see The Face on the Barroom Floor (poem) *a 1914 film starring Charlie Chaplin; see The Face on the Barroom Floor (film) *a painting, by Herndon Davis, on the floor of the Teller House Bar in Central… … Wikipedia
The Face Behind the Mask — may refer to:* The Face Behind the Mask (1941 film), starring Peter Lorre * The Face Behind the Mask (1974 film), starring Lo Liehee also* Behind the Mask (disambiguation) … Wikipedia
-
RU - Нажимная гайка
Перевод: с русского на французский
с французского на русский- С французского на:
- Русский
- С русского на:
- Все языки
- Английский
- Итальянский
- Немецкий
- Персидский
- Французский
- Эстонский